There is no area of selection of position of movement tracking.

Similar Questions

• How to select several points of movement Tracker?

  I have a trajectory of Tracker with a lot of points. I can slide individually, and I can Shift + click to select more than one. But is there an easy way to select all the points in a given region? Or, best of all, all the points that follow a given time?

  I'm trying to drag all the points that follow a discontinuity in the path, to the difficulty of the discontinuity.

  Don't know what you're trying to do here. These 'points' are just keyframes and can be mass selected in the timeline panel and then you can change the values it by rubbing the digital displays. This will adjust them compared to the base value. If you need anything else, then you must adjust them one at a time, although you can find tools like KeyTweak and others found on AEScripts useful...

  Mylenium

• There are two select statement, which are as follows: 1) select project id, the name of ppm.pm_projects project_name and request_id 2) select id, name from request_type_name to kcrt_request_details. There is a column called entity that allows you to store

  There are two select statement, which are as follows: 1) select project id, the name of ppm.pm_projects project_name and request_id 2) select id, name from request_type_name to kcrt_request_details. There is a column called entity that can store a value i.e. project or request. I want to write a select statement containing a condition that is if the entity name is project and then run the select statement 1 otherwise, if the name of the entity's request, then run the select statement 2. All this must be written in a select statement. Can someone help me how to write this select statement type.

  Hello

  Hello

  2726057 wrote:

  ... There is a column called entity that can store a value i.e. project or request. ...

  In which table is this column?  Assuming that it is in a table called entity_table, you can do something like this:

  SELECT project AS id

  project name AS the name

  OF ppm.pm_projects

  WHEN THERE IS)

  SELECT 1

  Of entity_table

  Entity WHERE = "Project".

  )

  UNION ALL

  SELECT request_id ID

  request_type_name AS name

  OF kcrt_request_details

  WHEN THERE IS)

  SELECT 1

  Of entity_table

  Entity WHERE = 'ask '.

  )

  ;

  This does not have anything on the number of lines is entity_table, or what are the values in the column of the entity.  In other words, the query works in all cases.  If any line in entity_table entity = 'Project', then the pm_projects data will be included in the result set.  If any line in entity_table entity = 'Request', kcrt_request_details data will be included.

  I hope that answers your question.

  If this isn't the case, please post a small example data (CREATE TABLE and only relevant columns, INSERT statements) for all of the tables involved and the results desired from these data.

  Explain, using specific examples, how you get these results from these data.

  Always say what version of Oracle you are using (for example, 11.2.0.2.0).

  See the FAQ forum: https://forums.oracle.com/message/9362002#9362002

• Why are there no camera, microphone or buttons set position remains in my Panel of camera and microphone?

  Why are there no camera, microphone or buttons set position remains in my Panel of camera and microphone?

  You are on Windows 8 and have your UI reduced to 125%? If so, can you try a different scale for now? See the many controls not visible on Wacom Cintiq complementary 2 improved for general information.

• Adobe Reader 11.0.10, will not print.  Mssg "There are no selected pages" How do I print?

  Adobe Reader 11.0.10, will not print.  Mssg 'There are no selected pages', even with selected pages.  I tried 'Image', same mssg err. ;  Printer has the latest drivers.  Printer prints everything (browsers, docs, .xls), but not Adobe.  Used vacuum to unistall, received error message: 5 on GetNamedSecurityInfoand could not define Loyer.  Any help would be greatly appreciated.  THX

  Assuming you're on Windows, try changing the following preferences

  • Documents: series "Show the documents in PDF/A mode" Never
  • (Protection): Disable "protected at Startup Mode.

• "You are now in review Mode. Any selected choice will not be tracked"message is displayed in read mode

  HI -.

  I hope someone can help me with this. Whenever I create a project to capture 6 (or a virtual classroom recording in Adobe Connect) and we publish the material and make it available to our viewers in to connect, a message at the top saying "you are now in review Mode. Any selected choice will not be tracked. »

  We called Adobe several times without success as they say it is normal, but I watched the other videos to record Captivate and virtual classes from other companies and the "révision Mode" message does not appear during playback. It's very confusing to our viewers because they are worried, responses to the built-in quiz will not count and "do not track" the message says.

  Everyone knows this? I think it's a problem with a connection setting because when I look at the video of my content in Connect, reading seems functional and the message does not appear. When wrap us a course around the content and make it available to customer in the training catalog, the message appears.

  

  The message in review mode when someone interacted with the course and to be successful there is no predefined number of times. Then, when they consider it after one of these conditions is met, they will see the message in review mode, because Connect is followed is no longer their access, as it is useless. The course essentially becomes a resource for them until the date of its closure.

  Thus the viewer / learner has met one of these two conditions or credentials are shared (against EULA). If you don't need specific follow-up user, then let the presentation in the form of a content item, and no one will not see this message. If an individual is to see this message, and they do not know why, look at the reports for this person and see where their status is for this course.

• How can I stop the transfer of emails for those who are not selected

  I don't know if my hotmail works properly... cause it sends e-mails to people who are not selected for?

  Mary

  Hello

  As you use Hotmail and Hotmail-related question you have posted. I suggest that you post you query on the Hotmail forum for assistance:

  http://windowslivehelp.com/product.aspx?ProductID=1

• Dear all, in the follow-up to Massage exhange 2010 there is no option for selective date and time if we want to follow and check the delivery for 2 months mail report, then how, please guide

  Dear all, in the follow-up to Massage exhange 2010 there is no option for selective date and time if we want to follow and check the delivery for 2 months mail report, then how, please guide

  Hi Anandsable,

  The question you have posted is based on Exchange 2010, it is better suited in the Exchange Server forum. Please post your question in the following forum:

  http://social.technet.Microsoft.com/forums/en-us/category/ExchangeServer, exchangeserverlegacy.

  Hope the helps of information.

• There is no option to select oracle technology in new model

  Hello

  I am trying to connect to oracle database. I created the oracle database server. Connection was successful.

  On the Designer tab, select the model tab. In this new model, I'm picking technology 'Oracle '. But there is no option to select "Oracle." Please help me?

  Normally, you scroll down the list of technologies and select 'Oracle' and that's all.

  Can you go the topology browser and make sure that Oracle is on the list of technology - just in case someone has deleted it

• Cannot print pdf.  indicates the pages are not selected when everything is selected or 1-12 is selected.  Why not print it and what has changed since he has always worked in the past?

  Cannot print pdf.  Message says pages are not selected when "all" is selected or when the "pages 1-12" is selected.  Why will it not print what is always in the past?

  Hi donw50735963,

  Please try the steps in the following article: Acrobat and Reader help / troubleshooting PDF printing | Adobe Acrobat, Adobe Reader

  Thank you

  Abhishek

• good when I have several pictures im by clicking between the spaces and the 2Installez them but theres a lot so I was wondering if there is a way to select and make snap toghter I looked online but no help

  good when I have several pictures im by clicking between the spaces and the 2Installez them but theres a lot so I was wondering if there is a way to select and make snap toghter I looked online but no help

  Yes, you can select a group of items in the project Panel, use of the PLC to the sequence option.

  Neil

• When a Blu - Ray burning are all selected by default different regions?

  When a Blu - Ray burning are all selected by default different regions?

  By selecting a region in Encore for Bluray has no effect, then Yes.

• Some photos are not selected when I try to import ("do not import possible double images" is turned OFF!)

  Some photos are not selected when I try to import. I used Lightroom 5 since it launched and do not have this problem until a month ago (select: "do not import possible double images" is turned OFF!). I really have to control my import in the opposite case, it miss a few images, but don't know what to do when the picture is not selected. How can I import the correctly without making stuff and that's why spoil my archive carefully planned? My archive is too packed and I have double numbers ore something? What I need Lightroom 6?

  Thank you very much for your help!

  Best regards, Enith

  "Photos are indeed grey, but the imported photos are new assignments, so this:" ","then it means that you have previously imported photos in Lightroom, and so it is not necessary to import them again ', is not the case.

  While you are probably right, if the photos were just captured, the problem is that Lightroom think that these are the same pictures that were previously imported, and so until you can determine why Lightroom think that you won't progress.

  You need search for any of these photos in your Lightroom Catalog. Follow these 4 steps in order

  1. In the catalog Panel on the left side of the library Module, click all photographs
  2. Develop all batteries (picture-> stacking-> develop all batteries)
  3. Disable all filters (once or twice Ctrl-L)
  4. Search for one of these photos by file name

• Icon "Are the selected markers to separate the export audio files" is grayed out outside in the markers window. The titles show starts but no end of times, and yet time is calculated.

  I have a large wav file to finish securities as a mixer and inserted the CD markers where I want the marked pistes. Icon "Are the selected markers to separate the export audio files" is grayed out outside in the markers window. The titles show starts but no end of times, and yet time is calculated. Why can't I export those items marked as separate files?

  You must make the markers of track in regions for the Export of work function. Make sure that you have placed a marker at the end of the file, as well as at the beginning of each track. Then select all the markers in the marker list by left clicking the first then shift left click on the last. You can then merge markers in the channels using the comb as icon (3rd from left) at the top of the list of markers. You will then be able to export the lines marked as separate files.

• PSE11 on Mac: area of selection for the dark discoloration.  All the patches?

  Recently begun to encounter a problem in PSE11.  When I select an area of an image using the rectangle or lasso, the area I selected immediately melted in the dark.  Change the area of selection makes it visible again for a moment, then he vanished again.  I know that the underlying image is not affected, because I can apply changes (filters, etc.), and the image returns to normal when I deselect.  However, it's more complicated image editing.  I'm on a MacBook Pro under Snow Leopard (10.6.8).  I also use Lightroom 4 and have defined as external PES Editor.

  I uninstalled and reinstalled the PSE, which helped for a while, but the problem came back.  Here is a video of what happens on an empty image file.

  Can anyone allows you to identify the problem or offer solutions?

  Thank you.

  It's strange. Go in the editor preferences > general, click this button and restart the Editor: