There is no option to select oracle technology in new model
Hello
I am trying to connect to oracle database. I created the oracle database server. Connection was successful.
On the Designer tab, select the model tab. In this new model, I'm picking technology 'Oracle '. But there is no option to select "Oracle." Please help me?
Normally, you scroll down the list of technologies and select 'Oracle' and that's all.
Can you go the topology browser and make sure that Oracle is on the list of technology - just in case someone has deleted it
Tags: Business Intelligence
Similar Questions
-
Dear all, in the follow-up to Massage exhange 2010 there is no option for selective date and time if we want to follow and check the delivery for 2 months mail report, then how, please guide
Hi Anandsable,
The question you have posted is based on Exchange 2010, it is better suited in the Exchange Server forum. Please post your question in the following forum:
http://social.technet.Microsoft.com/forums/en-us/category/ExchangeServer, exchangeserverlegacy.
Hope the helps of information.
-
I can't activate Microsoft Silverlight. I've attached a screenshot of control. This is the only plugin that says "disabled" next to him. I've updated to the latest version and there is no option on the page of the plugins to acivate because he says 'never activate' and no other selection is selectable.
Unfortunately, your screenshot is not come through. You can link it to a reply in this thread if you wish.
If you exit Firefox and it starts again since installing Silverlight, please try this in case a file is locked.
Can also see you in the editor preferences as follows:
(1) in a new tab, type or paste Subject: config in the address bar and press ENTER. Click on the button promising to be careful.
(2) in the search above the list box, type or paste the npc and make a pause so that the list is filtered
(3) If you find a preference for the plugin.state.npctrl preparing to something other than one, try to double click on it and set it to 1. For reference:
- 0 = > never activate
- 1 = > ask to activate
- 2 = > always activate
If the preference has a different status from 'the user game' as 'locked', which would indicate a different problem.
-
Dear Experts,
I am unable to find the "ATA" option in dell optiplex 3040mt. where might not deploy top Windows Server 2008 image.
In dell 3020 I deploy the image using ATA mode.
Please tell us how to activate the "ATA" option in Optiplex 3040 and install windows server 2008.Thank you!
Jesse There is no option in 3040 because the ATA mode is no longer supported. F6 drivers are REQUIRED for windows 7, 8 or 10. XP/VISTA is not supported at all and will not be installed.
AHCI is the only option available in the modern Bios and chipsets.
The INTEL RST F6 drivers are REQUIRED for all advanced sector format 4 k drives. Most of all the readers
-
7410 no option to select the upper/lower case paper tray
I installed the latest version of the software for XP for my all-in - One 7410, but there is no option to select the lower tray. It shows that "upper status bar. In the past, she offered tray tray upper, lower, lower then higher, higher than the lowest, etc. With the installation later, he seems to have disappeared. Can anyone offer advice to recover my options (to use the lower tray, for example)? Thanks in advance.
Message edited by mmcphie on 06/11/2009 14:22Message edited by mmcphie on 06/11/2009 14:23Problem solved! By chance, I stumbled on the solution of the problem in another HP forum. There is something lacking in the register, and when you add a key word, the issue is resolved immediately.
I found the solution below Resource Center Forums > multifunction, copier, fax & > multifunction color, then the thread titled paper tray Officejct 7410 by default (as of February 4, 2006). When I added the registry HPDJEnableSecondTray key as Marshall has suggested, it solved the problem. As also noted, it seems to be a bug in the software when you reinstall.
I got lucky stumble on this solution after a few searches on Google and write here for anyone else having a hard time to find.
-
With the help of Photoshop CC on my MacBook Pro (bought a few months ago)... The question I have is that under the filter options, when you select made... There is no option use lighting effects... any suggestions?
Hello
Please make sure that you work in 8 bits/channel and RGB mode. (Under Image > Mode > Select RGB and 8-bit per channel) lightning effects only works in this mode.
Also in preferences > Performance > "Use Graphics Processor" must be checked.
~ Assani
-
Hello
After the last update that I can develop is more saved passwords window shrinking the web address to make it unreadable when the "Show passwords" option is selected? What passwords are shown the window compresses web addresses that leaves the www / / http and I can only be able to view a letter or a description of the site. Given the number of passwords you need and different requirements (i.e. 6.8, or 10 characters, high low case number of cases etc.), I quite often find that I want to display the entire page.
Is there a way I can expand this window please? I know I could use a master password, but I always like to follow the real things...
THX JasLower right corner is a "triangle of 6 points" which allows this window to drag more big. Once more this setting is after the closure of the tab "content" and even after that Firefox is closed and reopened.
-
Is there a way to disable Hyper-Threading technology (HTT) technology?
It's really bothering me with some applications...
I can't find it in the bios... 1.5... He was in the bios earlier?... Is there a way to roll back...It is even possible...
Post edited by: rekof
Hello
Hyper-Threading technology is supported by CPU and it of not possible to disable it, if this option is not available in the BIOS.
See this Intel Info page:
http://www.Intel.com/support/processors/Pentium4/sb/CS-017371.htmWelcome them
-
It is not an option to select the registry editor
original title - same topic-other problem
When double clicked on addspooler.reg & open with is selected, there is no option to the registry editor select. You said there was another way - that was my question. Thanks for any help.
Also my instructions said:
Alternatively, you can right-click on the "addspooler.reg" file, choose open with... and select the registry editor which will then import the file. If you double click it and it opens with Notepad, this means that XP (at some point) said to open with notepad .reg files. This isn't really a problem since you can import the file otherwise.
In your case where you do not see the extension .reg, rather right click the "addspooler" file and choose ' open with... The registry editor "."
Do not double click on the file-it will not work for you.
RIGHT click ON the addspooler.reg file and follow the directions to open with... The registry editor.
Y at - there some problem with these instructions read you them and that it cannot be implemented?
Maybe the message is displayed in white on your end?
Now, it's really the last, finally, finally, the last time that I re-post the instructions.
-
Under disk cleanup, there is an option to compress old files
Under disk cleanup, there is an option to compress old files. Office folklore says that problems come from compressing the files. Mythology like that change slowly and often does not upward with the reality. What is the current conventional wisdom on all dangers associated with compressing files?
Personally, I don't compress files and probably never - if necessary, I'll just get a bigger hard drive (or another hard drive or an external hard drive). As long as compress you only the correct files (not your files start or something like that), I guess it is quite - safe, but they take longer to open - not much, but some and depends on the size (they need to decompress) practice is always a risk, when something like this as a form of bribery occurs (which is us back to the old mythology (, but the risk is generally considered a minimum and I do not want to exaggerate - but there are).
Opinions vary among experts and you'll get to the other end of the spectrum. Some will tell you it is perfectly safe and a good way to save space on your hard drive. Others take a middle path, and say that they are not positive, but think it's safe, but acknowledge that there are exceptions. You can see some reactions like the one posted here. As I said, I personally willnever do (with the exception of some files can I compress for e-mail or because he is great and I expect never to need again, or for other reasons - but they would have been individually selected and completed for a purpose {and using a different program]). I mean I would never use the option of the files old drive generic cleanup compress to do a little overall with no individual selection (and when I do it with an individual file, it is rare - I probably didn't do so in more than a month - and to be perfectly honest, when I compress a file to send by e-mail I have everything first make a copy and compress the copy and keep the original uncompressed). I have also seen here situations where people have compressed their files to start with virtually everything else, and this caused them a lot of grief - this isn't an easy repair process and the system does not boot with compressed files (I don't know how they did it-I just saw the messages, but no unread discussions - but if there is no chance that the compression of disk cleanup) been involved (and I'm not, but I did not read how it happened and so I guess it's possible), then it's just another reason for me to stay away). As you probably now, I don't really have confidence the process (maybe I still have some as old folklore Office in me as I've been around when firstly, he came out and got all these problems) and would rather spend the money on a large or second hard drive what to compress my old files. I prefer not to take any chance that I don't have in my data which are valuable for me.
The process is availalble and is generally considered reasonably safe when used properly - but not a lot of experts I know do. It is MUCH safer than when it came out. When suggest us ways to save space on the drives for those who have little space and do not want to upgrade or get a new one, it is rare to see someone suggest compression as one of the options (I never do). We suggest many other alternatives, but I never see this option underlined or specifically suggested (although it may be included as an option in the process we propose you like disk cleanup - and I don't specifically discourage its use is if you heard what I'd say if specifically requested).
In the end, the decision is yours.
I hope this helps.
Good luck!
Lorien - MCSA/MCSE/network + / has + - if this post solves your problem, please click the 'Mark as answer' or 'Useful' button at the top of this message. Marking a post as answer, or relatively useful, you help others find the answer more quickly.
-
I had to format my hard drive neighbors after a virus naughty (Win32/sirefef. (R) and when it was time to activate the product key, there is no option for phone didn't activate. Is there a phone number I can call to activate? Also it is a Gateway computer purchased on 14/09/2008. Thanks for your help.
Windows Vista Edition Home Premium.
Diagnostic report (1.9.0027.0):
-----------------------------------------
Validation of Windows data-->
Validation status: genuine
Validation code: 0
Validation caching Code online: n/a, hr = 0xc004f012
Windows product key: *-* - 3RBY2 - BGQ2R-DR9M6
The Windows Product Key hash: EYIpz/47G03lWRAOmk3kg + lR7Rc =
Windows product ID: 89578-OEM-7332157-00141
Windows product ID type: 2
Windows license Type: OEM SLP
The Windows OS version: 6.0.6002.2.00010300.2.0.003
ID: {F29B904B-17B2-4563-AECB-A64A22916859} (1)
Admin: Yes
TestCab: 0x0
LegitcheckControl ActiveX: N/a, hr = 0 x 80070002
Signed by: n/a, hr = 0 x 80070002
Product name: Windows Vista (TM) Home Premium
Architecture: 0x00000000
Build lab: 6002.vistasp2_gdr.120402 - 0336
TTS error:
Validation of diagnosis:
Resolution state: n/aGiven Vista WgaER-->
ThreatID (s): n/a, hr = 0 x 80070002
Version: N/a, hr = 0 x 80070002Windows XP Notifications data-->
Cached result: n/a, hr = 0 x 80070002
File: No.
Version: N/a, hr = 0 x 80070002
WgaTray.exe signed by: n/a, hr = 0 x 80070002
WgaLogon.dll signed by: n/a, hr = 0 x 80070002OGA Notifications data-->
Cached result: n/a, hr = 0 x 80070002
Version: N/a, hr = 0 x 80070002
OGAExec.exe signed by: n/a, hr = 0 x 80070002
OGAAddin.dll signed by: n/a, hr = 0 x 80070002OGA data-->
Office status: 109 n/a
OGA Version: N/a, 0 x 80070002
Signed by: n/a, hr = 0 x 80070002
Office Diagnostics: 025D1FF3-364-80041010_025D1FF3-229-80041010_025D1FF3-230-1_025D1FF3-517-80040154_025D1FF3-237-80040154_025D1FF3-238-2_025D1FF3-244-80070002_025D1FF3-258-3Data browser-->
Proxy settings: N/A
User Agent: Mozilla/4.0 (compatible; MSIE 8.0; Win32)
Default browser: C:\Program may Explorer\iexplore.exe
Download signed ActiveX controls: fast
Download unsigned ActiveX controls: disabled
Run ActiveX controls and plug-ins: allowed
Initialize and script ActiveX controls not marked as safe: disabled
Allow the Internet Explorer Webbrowser control scripts: disabled
Active scripting: allowed
Recognized ActiveX controls safe for scripting: allowedAnalysis of file data-->
Other data-->
Office details:{F29B904B-17B2-4563-AECB-A64A22916859} 1.9.0027.0 6.0.6002.2.00010300.2.0.003 x 32 *-*-*-*-DR9M6 S-1-5-21-61353009-3653542383-3925704477 89578-OEM-7332157-00141 2 Gateway FX7024 Intel Corp. DPP3510J.15A.0316.2008.0522.1909 20080522000000.000000 + 000CA303507018400FA 0409 0409 Time(GMT-05:00) Standard is 0 3 GATEWA SYSTEM 109 Content Spsys.log: 0 x 80070002
License data-->
The software licensing service version: 6.0.6002.18005
Name: Windows Vista, HomePremium edition
Description: operating system Windows - Vista, channel OEM_SLP
Activation ID: bffdc375-bbd5-499d-8ef1-4f37b61c895f
ID of the application: 55c92734-d682-4d71-983e-d6ec3f16059f
Extended PID: 89578-00146-321-500141-02-1033-6002.0000-2142012
Installation ID: 019464191400670845469832988961665655157832099470364192
Processor certificate URL: http://go.microsoft.com/fwlink/?LinkID=43473
Machine certificate URL: http://go.microsoft.com/fwlink/?LinkID=43474
Use license URL: http://go.microsoft.com/fwlink/?LinkID=43476
Product key certificate URL: http://go.microsoft.com/fwlink/?LinkID=43475
Partial product key: DR9M6
License status: initial grace period
Time remaining: 21420 minute (s) on (14 day (s))Windows Activation Technologies-->
N/A--> HWID data
Current HWID hash: MAAAAAEAAAABAAEAAwABAAAAAgABAAEA6GHm1ypJCD7ETDq83Cjy9MBrVjWsVswxActivation 1.0 data OEM-->
N/AActivation 2.0 data OEM-->
BIOS valid for OA 2.0: Yes
Windows marker version: 0 x 20000
OEMID and OEMTableID consistent: Yes
BIOS information:
ACPI Table name OEMID value OEMTableID value
SYSTEM GATEWA APIC
SYSTEM GATEWA FACP
MCFG GATEWA SYSTEM
WDDT GATEWA SYSTEM
ASF! SYSTEM GATEWA
SLIC SYSTEM GATEWA
ASPT GATEWA SYSTEM
WDTT GATEWA SYSTEM
SSDT GATEWA CpuPm
SSDT GATEWA CpuPm
SSDT GATEWA CpuPm
SSDT GATEWA CpuPm
SSDT GATEWA CpuPm
SSDT GATEWA CpuPm
SSDT GATEWA CpuPm
SSDT GATEWA CpuPm
SSDT GATEWA CpuPmYou must change the key to that on your COA sticker, using the link change the key of product at the bottom of the system properties page.
You will then automatically by phone #.
activation by telephone (call of the operator)
Click the Start button
in the search box, type
SLUI 4
and press the Enter key
Follow the instructions, but when asked what service you need the ansafone phone, don't answer - it should oblige the operator to answer, who can deal with you -
I'm trying to transfer photos from my Blackberry. I don't have a data plan or a micro sd card, so the usb mass storage option is (I think) the only way for me to get my pictures on my computer and my phone.
I plug the usb cord into my computer and the phone, but my computer does not recognize the phone as a storage device, so when I click on "removable disk (E)" in my computer, I am asked to insert a disk in the drive.
I read that, so that it works, I need to turn on my Blackberry mass storage. I go to options and storage device; However, there is no option "Mass Storage" even that are listed. Only two options with checkboxes are 'Enable Compression' and 'Media Card Support.'
Is the storage option of mass elsewhere on the Blackberry Curve? I tried to restart my phone, computer, using different usb ports, and using usb different cords nothing helps. How can I get my pictures on my phone?
Hello
You can still use BlackBerry Desktop Software for it!
If your media or Images are stored on the memory of our device then first install BlackBerry desktop Software here BlackBerry desktop software after installation connect your device using the USB cable and run the Desktop software.
Select images from software then you can import the Images on your PC.
Good luck.
-
There is no option in the bios to enable the memory remapping? !
There is no option in the bios to enable the remapping... my last windows 7 x 64 memory showed all my 4 GB of ram... but however I have clear now to install win7 x 64 or x 64 pro win8 it said usable 3.79 and info pc does not recognize my nVidia GPU (only graphics card intel HD recocnizes) while the nVidia control panel can recognize GPU and intel HD graphics together... my system is asus u36jc notebook... help is there Please...: |
Hello
Please contact Miceosoft answers.
Memory remapping option is not available in the BIOS and we can't really. If you do not want to remap the memory, turn the computer off, remove the cover from the chassis and modules of memory Exchange (only if there is more than one).
I assume you are using an Intel core i processor series, 2nd or 3rd generation. Usually when your pc doen't need many complex graphic treatment, the processor works as the graphics processor. In this case, when you check with Windows, it will show only currently work graphics processor - Intel HD graphics card. In addition, you can switch between graphics, to know what is the default value. In this way, if you select graph nVidia, Windows will display it info.
I suggest to keep the setting of graphics as such for extended battery backup.
-
Hide a text field, unless a certain option is selected in a menu drop-down
Hello
I am working on a form and need to hide a text field, unless an option is selected in a drop-down list box. There are nearly 30 options in the dropdown menu, but only to trigger the text field.
I tried this script on the field of text under "calculate":
Event.Target.Display = (this.getField("Dropdown1").value == "Other")? display.visible:display.hidden;
but it doesn't seem to work. I have looked for alternatives, but impossible to find exactly what I'm looking for. Any help is greatly appreciated.
The first two characters (backslash) make this line of code one comment, so if you remove it should work.
-
good when I have several pictures im by clicking between the spaces and the 2Installez them but theres a lot so I was wondering if there is a way to select and make snap toghter I looked online but no help
Yes, you can select a group of items in the project Panel, use of the PLC to the sequence option.
Neil
Maybe you are looking for
-
T430 is very slow after fashion 'sleep'
I have a T430 is a couple of months. I had this problem from the beginning. Care clean (have a Dell laptop with the same characteristics and there never have this issue). Processor: Intel Core i5 - 3320 M CPU @ 2.60 GHz RAM: 4 GB Basically after each
-
Bionic, Specs photo and manual now on the site of the FCC
Thanks to this link HAD: https://fjallfoss.FCC.gov/oetcf/EAS/reports/ViewExhibitReport.cfm?mode=exhibits& RequestTimeout = 500 &... The good news for me (currently in China Xian) is that it's global phone! Check the photo or the manual for more infor
-
Often after I reboot my system, a red shield with a white "x" appears in my notification area with a message of balloon saying "your computer may be at risk. The shield remains there until the next time that I reboot. This bug won't be fixed?
-
How can I find the HP prog who remembers my passwords
Have all new TouchSmart 520 and when I started somehow, I found a prog which was to remember my password but I could not find him. Where can I go please?
-
Hello I have the following error when I want to open a connection to a file on the server. ConnectionClosedException: Not connected The code is: HttpConnection conn = null; String connSuffix = updateConnSuffix(); this.url = this.url + connSuffix; con