There must be 150 updates connected on my desk, some like three years old. Should I leave them in place or should they be deleted/non-installed?

Similar Questions

• You can connect a Mac Mini to a 2 year old iMac?

  You can connect a Mac mini to an older iMac?

  Please define "connect"...

• is there a step by step guide for Mozilla protection if my 5 year old daughter click on something that could be dangerous for her?

  I need to set up a login for my older daughter of 5 years on our computer, so she only has access to Mozilla, and once on Mozilla that she cannot access inappropriate Web sites. Is there a step by step guide for someone who has never done this before?

  My operating system is Windows 7

  Thank you very much for you help and guidance.

  Respectfully,.

  Derek Mr. Bond

  Hello Derek,
  I understand that you're concerned about your daughter and there is certainly a way to solve this problem.

  1) http://www.qustodio.com/
  This is a free parental control software that offers what you need

  (2) otherwise, you can also try this one: http://www1.k9webprotection.com/

  Best regards, G-Cloud.

• Sometimes my wireless connection is very slow. Our people at work said there must be a lot of people in my neighborhood picky backup me & that I need to put a password on the router.

  sometimes working wireless on my laptop is very slow. Our people at work said there must be a lot of people in my neighborhood picky backup me & that I need to put a password on the router. How can I do this?

  original title: addition of router password?

  The manual is expected to be online. If you have pain to find - know everyone here the brand name and model - it is likely that someone here can help more.

  Basically connect to the interface web (usually via http://192.168.1.1 or http://192.168.0.1 web page with the username "admin") and change the password in the configuration / administrative to something (I suggest 15 + characters including letters - upper and lower case, numbers and symbols) and then find the wireless configuration and change the password for it to something other than the administrative password - but with the same suggestion.  If she uses WEP and you have all the relatively new devices (all purchased in the last 7 years) then I suggest change you in WPA.  If possible, replace WPA2.

  Probably there is also a place where you can see who is connected.

  What type of Internet connection you are paying for?  (Include numbers upstream and downstream, given to you by the service provider and the type...)

• I need to change the folder where download windows updates, I know there must be a way to do this.

  Could someone help me on this issue.

  I need to change the folder where download windows updates, I know there must be a way to do this.

  Updates Windows installation location cannot be changed. Windows updates tend to fix and replace the old files of the system, so it would normally replace a file in the System32 folder.

  If you want to free up disk space, see the following:

  • How to back up and restore your files manually
  • How to free up disk space in Windows

• I don't get updates for the retina of my macbook pro 15 mid 2015 2.5 processors 16 g ram, last updated, I got was garage to April 8, may be there is no more updates at this time, but what made me think twice this app a player have updated when trigger

  I don't get updates for the retina of my macbook pro 15 mid 2015 2.5 processors 16 g ram, last updated, I got was garage to April 8, may be there is no more updates at this time, but what made me think twice as more than one reader app have update to search for the app store When news, nothing happened and onedrive will not be updated, and this dose of update does not appear in the section updates in the app store app

  any body can help?

  That's what I have in the last few weeks

  

  Make sure you have a good WiFi connection and are signed in iCloud / App Store

• There are currently no available connection server

  I installed windows 2008 Server. I did so the domain controller. Then I downloaded the microsoft.com windows updates all updates downloaded and installed successfully, but after the installation of updates cumputer restarted and when login screen lights up and that I have provided the password. strategies of Windows me error "there are currently no server connection.

  Update Befire, he worked everything is OK

  Please help me

  Mahmood

  I'm sorry, but this is the Forum for Windows Vista update.

  http://www.Microsoft.com/windowsserver2008/en/us/forums-blogs.aspx

  Above is the link for 2008 Server Forums.

  They will help.

  See you soon. Mick Murphy - Microsoft partner

• must my computer be connected to the internet for the development of work?

  must my computer be connected to the internet for the development of work?

  Hello

  Yes, because it updates your machine:

  Updates that help protect against performance problems future system by updating the PC with the Windows then in force, the BIOS firmware and software updates for security

  Source: http://www.hp.com/sbso/services/pc-tune-up-pro-datasheet.pdf

  Kind regards.

• Windows Update indicates that there are no more updates when there is a lot more updates needed to be updated

  I recently restored my Vista PC for copy of factory and re-applied Windows updates. I can not connect to wireless internet and discovered that it's thanks to put corrupt up-to-date Windows.  I have 1 installed SP and Windows Update says there is no more updates to be applied.  But I want to get SP 2 applies, so I can move to Internet Explorer 9.  How can I continue with the rest of the Windows updates?  Do I just have the SP 2 from the Windows Update Catalog directly?  Will there be other necessary updates before the Vista SP2?   Before this Windows Update repeatedly appy SP 1 even want me it was properly installed.  I had to hide this update SP 1 to pass.

  Two copies:
  Windows Vista update problem, continue, after running sfc, the paper shows the corruption of the file system

  I'm new to this community and accidentally marked this problem have responded. The truth is that it is not. I'm sorry that I have to create a new question. The original question is: ' Windows Update indicates that this PC is up-to-date, but actually much more KB (including SP2) had to be installed "."

  Hi Nathalie,.

  I followed your instructions and made the file (sfc scan) system in the method. The result is

  Windows resource protection found corrupt files but was unable to solve some of them. I select all the records of SR in the cbs.log newspaper and place the records in a text file. There are several check and 0 repair but it did not specify any file name. Now I don't know how to continue. This is not what I expected. I ran Checksur.exe, which was very good.

  How can I know what system files are corrupt and do the repair? Thank you.

  Hello

  What is the size of the Service pack 1 installed on the computer in the history of Windows?

  I suggest you perform the clean boot, download and install Windows Vista service pack 1 from the following link:

  How to perform a clean boot for a problem in Windows Vista, Windows 7 or Windows 8
  http://support.Microsoft.com/kb/929135

  Note: Follow How to reset the computer to start as usual after a clean boot troubleshooting article KB929135 to reset the computer in normal mode.

  Download link: Windows Vista Service Pack 1 five language standalone (KB936330)
  http://www.Microsoft.com/en-in/Download/details.aspx?ID=30

  We answer with the result once you try the steps above.

• Windows 7 - there are currently no available connection server to process the logon request

  Hello to all IT experts out there, good day.

  Our company currently a problem recently:
  Problem: Impossible to connect to the pc when outside his functions with Active Directory NT profile/account

  When: January 9, 2012 until today

  The frequency at which this happen: intermittently

  Description of the problem/error: there is currently no available connection server to process the logon request

  How many affected system: 4-5 machines with the same laptop model (HP 8540w)

  O.S Windows 7 64-bit Enterprise and Windows 7 64-bit Enterprise Edition with SP1
  Action taken:
  Area return, group update policy, re - create a profile NT, update BIOS, OS reformatting/reinstall.
  Current solution: connect using the profile/account local and use it at home, back in office, reconnect the LAN and able to connect using NT profile/account and retry again at home.
  More information: our company have model HP range and never receive such problem reported except this model. There are a lot of employees using this model too but yet get affected, now here's some machine assigned to the breast in the same Department, but we have identified if all 3rd party software installed which make changes of protocol network or element (no) and still we could not find any same software installed on these machines.
  What I'm looking for
  ?
  I need some experts advise to identify this regardless of whether a customer number or domain server problem, if the customer, what are the root cause and troubleshooting opportunities we should take
  If the server problem, I'll get assistance by opening a case to our server support team.
  Help, please. Thank you very much.
  One of the affected machine network news:
  C:\Windows\System32>ipconfig/all

  Windows IP configuration

  Name of the host...: XXXXXX

  Suffix main Dns...: XXXXXX.com

  Node... type: hybrid

  Active... IP routing: No.

  Active... proxy WINS: No.

  ... DNS suffix search list: XXXXXX.com

  XXXXXX.com

  Adapter Ethernet Local Area Connection * 17:

  State of the media...: Media disconnected

  The connection-specific DNS suffix. :

  ... Description: Juniper Network Connect virtual adapter

  Physical address.... : 00-FF-10-A0-65-0A

  DHCP active...: Yes

  Autoconfiguration enabled...: Yes

  Wireless network connection Wireless LAN adapter:

  The connection-specific DNS suffix. : XXXXX.com

  ... Description: Intel Centrino Ultimate-N 6300 AGN

  Physical address.... : 00-24-D7-BD-5B-E0

  DHCP active...: Yes

  Autoconfiguration enabled...: Yes

  Address IPv6 local link...: fe80::79c9:372 has: 7a7c:e4dc % 15 (Preferred)

  IPv4 address...: 130.30.87.80 (Preferred)

  ... Subnet mask: 255.255.248.0.

  Lease obtained...: Thursday, February 2, 2012 07:17:24

  End of the lease...: Friday, February 3, 2012 07:17:23

  ... Default gateway. : 130.30.80.1.

  DHCP server...: 130.27.32.128

  DHCPv6 IOOKING...: 452994263

  DHCPv6 DUID customer...: 00-01-00-01-15-78-C2-8C-B4-99-BA-E9-86-5E

  DNS servers...: 130.27.32.128

  130.27.48.128

  Primary WINS server...: 130.27.152.52

  Secondary WINS server...: 130.29.152.153

  NetBIOS over TCP/IP...: enabled

  Bluetooth network connection Ethernet card:

  State of the media...: Media disconnected

  The connection-specific DNS suffix. :

  ... Description: Device Bluetooth (personal area network)

  Physical address.... : CC-52-AF-88-D9-31

  DHCP active...: Yes

  Autoconfiguration enabled...: Yes

  Ethernet connection to the Local network card:

  The connection-specific DNS suffix. : XXXXX.com

  ... Description: Intel 82577LM Gigabit network connectivity

  on

  Physical address.... : B4-99-BA-E9-86-5E

  DHCP active...: Yes

  Autoconfiguration enabled...: Yes

  Address IPv6 local link...: fe80::e8d1:38 ca: e868:9770% 12 (Preferred)

  IPv4 address...: 130.27.38.17 (Preferred)

  Subnet mask...
  . : 255.255.252.0.
  Lease obtained...: Thursday, February 2, 2012 07:17:08
  End of the lease...: Thursday, February 9, 2012 07:17:10
  ... Default gateway. : 130.27.36.1.
  DHCP server...: 130.27.32.128
  DHCPv6 IOOKING...: 330602938
  DHCPv6 DUID customer...: 00-01-00-01-15-78-C2-8C-B4-99-BA-E9-86-5E
  DNS servers...: 130.27.32.128
  130.27.48.128
  Primary WINS server...: 130.27.152.52
  Secondary WINS server...: 130.29.152.153
  NetBIOS over TCP/IP...: enabled
  Card tunnel Local Area Connection * 20:
  State of the media...: Media disconnected
  The connection-specific DNS suffix. :
  ... Description: #5 Microsoft 6to4 card
  Physical address.... : 00-00-00-00-00-00-00-E0
  DHCP active...: No.
  Autoconfiguration enabled...: Yes
  Card adapt 6TO4 tunnel:
  State of the media...
  . : Media disconnected
  The connection-specific DNS suffix. :
  ... Description: Microsoft 6to4 card
  Physical address.... : 00-00-00-00-00-00-00-E0
  DHCP active...: No.
  Autoconfiguration enabled...: Yes
  Card tunnel Local Area Connection * 12:
  State of the media...: Media disconnected
  The connection-specific DNS suffix. :
  ... Description: Microsoft Teredo Tunneling adapter
  Physical address.... : 00-00-00-00-00-00-00-E0
  DHCP active...: No.
  Autoconfiguration enabled...: Yes
  Card tunnel Local Area Connection * 17:
  State of the media...: Media disconnected
  The connection-specific DNS suffix. :
  ... Description: Microsoft 6to4 adapt #3
  Physical address.... : 00-00-00-00-00-00-00-E0
  DHCP active...: No.
  Autoconfiguration enabled...: Yes
  Card tunnel Local Area Connection * 19:
  State of the media...: Media disconnected
  The connection-specific DNS suffix. :
  ... Description: #4 Microsoft 6to4 card
  Physical address.... : 00-00-00-00-00-00-00-E0
  DHCP active...: No.
  Autoconfiguration enabled...: Yes
  Card tunnel Local Area Connection * 22:
  The connection-specific DNS suffix. : XXXXX.com
  ... Description: #7 Microsoft 6to4 card
  Physical address.... : 00-00-00-00-00-00-00-E0
  DHCP active...: No.
  Autoconfiguration enabled...: Yes
  IPv6 address: 2002:821 b: 2611:821 b: 2611 (Preferred)
  IPv6 address: 2002:821e:5750:821e:5750 (Preferred)
  ... Default gateway. : 2002:c058:6301:c058:6301
  DNS servers...
  . : 130.27.32.128
  130.27.48.128
  NetBIOS over TCP/IP...: disabled
  Card tunnel Local Area Connection * 21:
  State of the media...: Media disconnected
  The connection-specific DNS suffix. :
  ... Description: #6 Microsoft 6to4 card
  Physical address.... : 00-00-00-00-00-00-00-E0
  DHCP active...: No.
  Autoconfiguration enabled...: Yes
  Reusable Microsoft 6To4 tunnel map:
  State of the media...: Media disconnected
  The connection-specific DNS suffix. :
  ... Description: Microsoft 6to4 adapt #2
  Physical address.... : 00-00-00-00-00-00-00-E0
  DHCP active...: No.
  Autoconfiguration enabled...: Yes
  Tunnel adapter isatap. {251B844B-9080-4D91-A33C-D644B29D87A5}:
  State of the media...: Media disconnected
  The connection-specific DNS suffix. :
  ... Description: Adapter Microsoft ISATAP #2
  Physical address.... : 00-00-00-00-00-00-00-E0
  DHCP active...: No.
  Autoconfiguration enabled...: Yes
  Tunnel adapter isatap. {E7AF5244-8866-4417-BCD4-8A7E8CCBF18F}:
  State of the media...: Media disconnected
  The connection-specific DNS suffix. :
  ... Description: Microsoft ISATAP adapter
  Physical address.... : 00-00-00-00-00-00-00-E0
  DHCP active...: No.
  Autoconfiguration enabled...: Yes
  Tunnel adapter ISATAP.SCS.Agilent.com:
  State of the media...: Media disconnected
  The connection-specific DNS suffix. : XXXXX.com
  ... Description: Adapter Microsoft ISATAP #3
  Physical address.... : 00-00-00-00-00-00-00-E0
  DHCP active...: No.
  Autoconfiguration enabled...: Yes

  Post in the Windows Server Forums:
  http://social.technet.Microsoft.com/forums/en-us/category/WindowsServer/

• There must be a way to install 8.1 without the store?

  There must be a way to install 8.1 without using the store?

  I work in a small shop and we're maintenance machines of Windows 8 more every week.

  The only problem is that the store has been incredibly unreliable.  We kept a current to 8 machines directory and a little less than 60% of those that we have had so far this year have experienced problems getting Windows Update to work properly and to get extreme Windows 8.1 download has started and installed.  My colleagues and I have spent countless hours in the workplace and on our personal time trying to find fixes for these issues

  I cannot yet give a complete list of the problems that we had because there is so much to - everything from Windows update not download, 8.1 sitting at 0% for hours or even days in some cases, or the wonderfully useless screen "something happened and cannot complete the installation of Windows 8.1."  I even had one of our business customers bring two and nine in the box, portable identical in design.  We started the update and immediate installation.  The other was sitting on our bench for three days until we could get things

  We have tried everything we can to avoid these problems, but always happens on a daily basis.  Please tell me there is a way for us to upgrade all Windows 8 to 8.1 machines (that's what Microsoft wants, after all, isn't?) and to do so without the store.

  No there is not. Sorry, but Microsoft made the decision to release 8.1 by download from the store window and buy purchase retail only we will not have to like it, but it's the only game in town. Personally I recommend to my family and friends if they have problems to download Windows 8.1 they purchase a full retail copy and do a clean install. This also has the advantage that if you wipe your computer in the future you don't have to be bothered by all these many updates. Hope this helps and if you need another post to help and we will be happy to help you.

  The above opinion is mine and mine nothing and does not necessarily reflect that of Microsoft, it's employees, or any other Member of this forum.

  "When we try to take anything by itself, we find it hitched to everything else in the universe." -John Muir

• Is there anyone know how to connect the "HP PSC 2355 all in one for iPhone 4S?

  Is there anyone know how to connect the "HP PSC 2355 all in one for iPhone 4S?

  Hello

  First of all, please check if your printer in the list:

  http://support.Apple.com/kb/ht4356

  If so, you can use this hotfix/install:

  iPhone: http://www.Apple.com/support/iPhone/Assistant/AirPrint/

  If NOT you must print using other applications (if applicable) such as

  http://iTunes.Apple.com/au/app/HP-eprint/id299531647?Mt=8

  Kind regards.

• Legends and anchored objects - there must be a better way to do

  I spent a lot of time in the last six months, reconstruct PDF files in InDesign. It is part of my regular responsibilities, but I do a lot more of him for some reason any. Because I send you the text of these rebuild on documents for translation, I like that all of the text in a single story. It really helps to have the text in 'logical order', I think; When I prepare a trifold brochure, I try pretty hard to make sure that the order in which readers will read the text is reproduced in the stream of history throughout the identity document.

  So I'm rebuilding a manual as a form of 3 columns on letter paper and it is full of legends. Full of em. They are not pull quotes, either; each of these has unique text. Keeping in mind that I would like the text of those legends to stay in the same position in the text once I connected all the stories and exported a RTF for translation, which is the best way to handle them? What I do is insert a frame drawn emptly as an anchored object, size and position to sit above the text which is supposed to be shouted. When my translations come back, so they are always longer than the source document, as I crawl through the text, I resize the anchored images to match the size and position of the new extension translated the text and then move them in place with the keyboard.

  There must be a better way.

  It is better, right? I don't actually know too. If I really want to fill these frames anchored with text, I can't screw the them in the history. I suppose I could just put on the frames of the legend and assign two RTFs for translation instead of one, but then the 'logic' of my text order is thrown out the window. So, I am asking myself "what's more important? reduction of formatting time or maintenance of the flow of the story? "If there's something that miss me let me to dodge this decision, I would love to hear about it. The only thing I can think would work like this:

  (1) reproduce the text of the legend in the history with a custom sample "Invisible."

  (2) create "CalloutText" parastyle with "Invisible" swatch and apply it to the caption text

  (3) Insert the anchor for framework anchored immediately before the content of CalloutText

  (4) send it out for translation

  (5) while I'm waiting to get him back, write a script that would be (don't know if this is possible):

  (a) to scroll through the main story looking for any instance of CalloutText

  (b) copies an instance of contiguous to this style to the Clipboard

  (c) look back in history for the first preceding the instance of CalloutText anchor

  (d) fill the object anchored with the text on the Clipboard (that's where I'm really naïve)

  (e) implement a new parastyle the text of the legend

  (f) continue step by step through the story, looking for other instances of CalloutText

  If this is really the only decent solution, I'll simply go to the Scripting forum for more help with d). Any of you can make other suggestions?

  N ° there is no plugin dependencies (as long as you do not use

  APID version 1.0.46 - who had a bug that caused the warnings warning). Round-

  trigger by INX dirty not the text. If you return

  using the most recent version of the APID (version 1.0.47 pre5 and later - not)

  really yet published), plugin data should be preserved as well.

  Substances

• I have an iMac, but no other Apple products, and keeping in mind the long list of issues of update for Sierra, is there an advantage to update me?

  I have an iMac, but no other Apple product, and given the long list of problems on the pages of the community regarding the update for Sierra, is there an advantage to update me?

  You won't see anything, but the problems reported here most of the time. This is a support forum. People without problems, much more numerous than those having problems, but they are not seeking this community to report this fact.

  I have updated both my 2014 11 "MBA and my iMac 2011. No real problem. Performance on the iMac has been well below normal after the upgrade, but pretty much a reboot fixed that.

• There is NO selection update software on my phone! How are Iphone 3 # IOS updated? It may not be this difficult OR the answer is "It cannot be upgraded" - which is?

  There is NO selection update software on my phone! How are Iphone 3 # IOS updated?

  It may not be this difficult OR the answer is "It cannot be upgraded" - which is?

  The model number you have listed is an iPhone 4, which can be upgraded to iOS 7.1.2. To have the option to update software on the phone, you need at least iOS 5, otherwise you will need to use iTunes on your computer sync to perform the upgrade.