Thin client Orchestrator - Windows 7 64 bit

Similar Questions

• How to configure the mode of kiosh for thin clients on windows server 2008

  I have an eight Thin Clients who will use RDP to access (Terminal Server Services) Remote Desktop Services on a Microsoft Windows Server 2008 R2 Standard. I would like to set up a group of users for these Thin Clients to be in a mode Kiosh so that they have very limited capabilities, can not download and run anything, unable to save anything in the computer except on the desktop and when they log off and back on everything, they had disappeared because the mandatory profile is loaded again.

  I'll have another group that more access is needed.

  Kiosk.

  Post in the Windows Server Forums:
  http://social.technet.Microsoft.com/forums/en-us/category/WindowsServer/

• HP Thin Client running Windows Embedded don't profile with attributes DHCP

  My company has a large population of HP Thin Clients that are not attached to our AD domain and therefore cannot do dot1x because they have no certificates.

  We decided to do the profiling for these devices. We present a few attributes, two of these DHCP attributes.

  About 90% of our profile of thin clients, as expected, but the other 10% will refuse to work. We need to statically assign them to a group of identity to authenticate properly.

  A lot of troubleshooting reduced us to query DHCP the thin client sent was not received by the strategy node. A TAC engineer looked over the config switch, IP helper address configuration and said that everything seems to be configured correctly.

  The only explanation is that it seems that these specific thin clients were not finishing the DHCP process before reassigned switch the VLAN of the port. So when the dhcp request has been sent, the thin client was already in our vlan "invited" who does not dhcp to the ISE.

  It's very strange, because we have so many thin clients that works properly. It's only a handful that do not. We have not been able to further refine to something specific. They are running Windows Embedded Standard 7 and a majority of them are HP t5740. I don't see Windows or HP updates available for these units and not sure if there are any registry hacks available to expedite the DHCP process.

  Has anyone ever come across something similar to this?

  It's pretty obvious to me, the end point isn't you get profiled before there was authenticted, which means that you do not correspond to the profiling conditions defined in rules 6 and 7, which means it will match the rule 11 (I think, having not seen your real rules). What I expected this, is that endpoint gets profiled, if ISE receives the attributes of this endpoint via dhcp e.g. forwarding help. Then, what should happen is, that it should issue a certificate of authenticity to the switch, which will lead to the passage to be re - authenticate this ending point, which now must have customization attributes you are trying to match. However if the DHCP packet never reaches ise, it won't work. That's why I think you should do a trace of package on the ise server, to see if the packets actually reach ise. If they don't you will probably need to find another way to profile, or activate dhcp for assistance on your guest virtual local network. Have you looked at the attributes of endpoint maybe after 30 seconds? They change?

• Thin client Orchestrator - could not launch the application

  Hello!

  Since a few days I have problems to use the Client Orchestrator (jnlp file). It throws the error "unable to launch the application" just after the screen of "verification". In "Details", I see the message "missing required permissions manifest attribute in the main container: https://host:8281/vco/client/lib/o11n-application.jar'." "

  The problem is that for remote computers. If I run the client from the VirtualCenter Machine (which has installed orchestrator), then it starts very well.

  Its like a new requirement of java for jnlp files.

  Any ideas?

  

  Your Java has been updated.

  See VMware KB: Java 7 update 51 blocks vCloud Director and vCenter Orchestrator features

• Installation of the client on windows 2008 64 bit

  Hello
  
  2008 64-bit
  
  We have Oracle9iR2 db on a single machine and need to Setup client-server connectivity.
  
  For that I have to install installing the Oracle client on the machine that is having 2008 64 - bit Os
  
  Thus, when trying to install the client Oracle10g on 2008 64 bits (102010_win64_x64_client) get the error below:
  
  Abnormal termination of the program. An internal error has occurred.
  Please indicate the following files in the oracle support.
  
  'Unknown '.
  'Unknown '.
  'Unknown '.
  
  can someone please tell me the reason and the need to take action?
  
  The error above immediately after the start-up of the plant.
  
  which version of the client tool oracle can be used to install on 64 bit 2008 machine connect Oracle9iR2 db?
  
  Concerning

  This one should work:

  10204_vista_w2k8_x64_production_client.zip (507,934,134 bytes)

  It is in http://www.oracle.com/technetwork/database/10204-winx64-vista-win2k8-082253.html

  Best regards

  Gokhan Atil

  -------------------------------------------------------
  If you answer this question, please mark appropriate as correct/useful messages and the thread as closed. Thank you

• Thin client Orchestrator - do a right-click on the item in the inventory to run the workflow

  I have workflows that X type as a parameter.  Workflows are those that I wrote and the type of X is an object I created.  I have X type items in the inventory.  I right click on the item and select 'run the workflow... '. ».  I get the error "NoSuchElementException.  I tried to turn the journal level and research in newspapers, but I don't see any useful information on why it's a failure.  I can't find documentation that says explicitly that everything needed to run the workflow of the inventory.  I looked through the vso.xml for the vSphere plugin and can see nothing special here that I do not.  I can't find anything in the workflow that controls this behavior.  I put breakpoints in find(), findAll() findRelation() and can see no call there during the attempt.

  Any ideas?

  In your presentation of workflow for your type of object that is an input, specify the property 'display in the inventory?

  

• Imaging of HP Thin client tool

  Hello

  My apologies if this is a repost and has been processed before

  t5740 trying to install "Thin clients microsoft windows embedded standard image", specifically a version with an older version of the agent HPDM, however same issue on all versions.

  currently have windows embedded standard 2009 5.1.2600

  in other words, unable to use the 'thin client HP imaging tool.

  the 'usb format' or 'deployment' options work.

  When booting from newly created usb key, received the "error loading operating system" on the light client device.

  am I missing something really really obvious!

  the USB is fine - is it specific to a file that could be a problem, I wonder?

  ...

  Thanks for any idea!

  got Ahold of the image of the HP website...

  However, nothing wrong with the image - curiously was to do with the bios not recognize a 64 GB usb key!

  an old 2 GB key worked well.

  keep these old 1 & 2 GB handy glue!

  Bravo nevertheless!

• View 4 thin client hardware supports PCoIP

  If my thin client is windows-based os, there is no difficulty when we improve the mode 4. But what happens if my thin client is thin-os, such as wyse S10? do I have to replace it with a new model like P20 or seller will provide a new firmware?

  Hi Dingding,

  You can still use your existing endpoint hardware after and upgrade to view 3-4 of the view, as RDP is still available as a graphic distance communication protocol in View 4.

  If however, you want to upgrade to PCoIP, then you will need to worry about your endpoint equipment.

  PCoIP software, you can use VMware View 4 Client for Windows, which runs on Windows XP, Windows Vista and Windows 7. (And maybe even Windows XP Embedded)

  If you want to use your Wyse with PCoIP devices, you must wait for Wyse provide updated models. The P20 is the only model that Wyse announced so far. Wyse in the future will also support PCoIP on thin BONES.

  Here's an announcement from Wyse on PCoIP:

  http://www.BusinessWire.com/portal/site/Google/?ndmViewId=News_view&NewSID=20091110005514&newsLang=en

  Christoph Wegener

• HP t620 Flexible Thin Client: Windows 10 IoT Ent. Client light-load Multi Touch

  Customers light t620 (Std/MORE) running 'Windows 10 IoT Enterprise for Thin Clients' supported multi touch? Or alone only?

  Having a hard time finding a definitive answer online.

  Thank you

  The answer is Yes.

  See Page 5... http://WWW8.HP.com/h20195/v2/GetPDF.aspx/c04312126.PDF

  "Smooth, immersive experience with technologies like advanced multi-touch and Windows® 10 applications"

  -Keith

• Anyone know if its possible to install Windows thin PC on a Mac and use it as a thin client Windows?

  Anyone know if its possible to install windows thin PC on a Mac and use it as a client lightweight windows? I know you must have a license for the ASO install Win TPC for free but you can purchase the license to install it on products that do not have currently a copy of Windows to this topic. Web only if its possible to do it on a Mac. Thanks in advance.

  original title: windows thin pc on Mac

  Hello Stephen Safranek,

  The question you posted would be better suited on the TechNet support forum. I suggest you to post the question on the link:

  http://social.technet.Microsoft.com/forums/en-us/newThread?Forum=MDT

• Windows xp works on VESA PC Thin Client eBox-2300

  I need to know if its possible will work windows xp on VESA PC Thin Client eBox-2300
  Here are the specs
  processor == Vortex86 SoC (System on Chip)
  main memory is 128 MB of SDRAM
  It uses a card compact flash for a hard drive thinking about upgrading to 2 giga
  Windows xp runs by chance on it?
  Thank you

  Hello

  It does not support the full version of Windows XP. According to the manual, you can install Windows XP embedded, but you will need to contact the manufacturer for assistance on this.

  For help I recommend that you report this problem in Windows Embedded Standard.
  http://social.msdn.Microsoft.com/forums/en-us/category/EmbeddedWindows

• Thin Client t510 - printer redirect on windows server 2003

  Hi all

  just bought 4 T510 Flexible thin client. I have attached USB printer (Brother HL-2040 or a Brother HL-2130), but it does not redirect on the RDP session.

  I tried everything, to my knowledge, but without success. In the options of the Windows driver, I wrote EXACTLY the side server name of the printer (which is actually the same name identified by the customer).

  I noticed in the information system that the RDP version is rdp is 1.6.0 - 1.45...

  I thank in advance.

  I have the same problem but I managed to solve.
  I bought 10 of these T510 terminals, but with the same result on 3 different Windows Server 2008 R2 Terminal different (updated to the latest patch).
  Only one of these terminals sold the year before worked and so I checked the version of the software.
  By installing the old version of the terminals intelligent Zero Client the new T510 work with my printer in the Terminal Server session.
  New version does not work!

  I tried everything... this add features such as storage of the password, the support for the speed, etc... etc..., but the printer no longer works!
  I think that the change in the Protocol version RPD to give me problems.
  Now I have one here in the office with which I am trying to understand if I can solve the problem with the latest versions of the software that I could use.
  We install the Smart Core zero Image Z6X41019 Rev 1 (March 7, 2012) and it should work.
  PS, You must put the printer in T510 in the driver entry not working also the exact name of the driver that you see in Windows.

• Thin Client PC with Windows Embedded Standard 7/8 requirements?

  Dear support,

  Could you help us do I need a VDA or SA if we use

  Thin client, PC with Windows Embedded Standard 7/8?

  Thank you.

  Hello

  I suggest you to post the question on the TechNet Support link below. It is the team dedicated to the issue that you are facing.

  http://social.technet.Microsoft.com/forums/Windows/en-us/home?Forum=w7itpronetworking&filter=AllTypes&sort=lastpostdesc

  Do not hesitate to write us if you have problems with Windows

• How to use Windows 7 64-bit cisco vpn client?

  Hello

  I want to use the cisco vpn client to connect to my Institute.

  I use Windows 7 64-bit edition Home premium.

  I tried several options, but nothing has worked.

  Please suggest me the correct procedure to run on my Windows 7 64 bit Home Premium Cisco vpn client.

  Thanks in advance,

  Federico

  VPNclient is not yet supported on 64-bit windows.

  However, there is a beta version of the next 5.0.7 version that does.

  Have you tried this version? If so, what are the exact symptoms?

  Edit: you can download the 5.0.7 beta here

• Where can I download Oracle 11g R2 for Windows 7 64 bit Client? Thanks in advance.

  Where can I download Oracle 11g R2 for Windows 7 64 bit Client? Thanks in advance.

  http://eDelivery.Oracle.com