ThinApp SPSS 20 Build failing
Hey all,.
I try to use Thinapp 4.7 to virtualize a lot of the software that is used in laboratories here, so we can replace with a VDI solution lab computers as we have done with our public computers already. I always use a problem with Thinapping SPSS 20, specifically the build process fails and gives the following error message:
He continues to tell me that stats.exe is not a valid executable, but I can assure you that it is. I tried to launch the application by opening stats.exe both the original location and the location % drive_c % thinapp, they both throw very well. Anyone successfully thinapped this before or seen a similar problem with another app? I am very new to thinapping (this is my 3rd app) so I don't know much that does not require using the default parameters. Thanks in advance.
ThinApp does not support 64-bit on 64 bit OS applications capture.
Could you try capture SPSS on VM 32 bit Windows 7 please.
Tags: VMware
Similar Questions
-
The problems keep coming! Build failed
So far I'm batting about 100 during this eval. The new number is "Build Failed" on an application. I tried this two ways with the same results. Here is the error message. Any thoughts?
ThinApp\Captures\Peachtree Quantum 2009 - Accountants' Edition\%SystemRoot%\assembly\GAC_MSIL\CrystalDecisions.CrystalReports.Engine.resources\12.0.2000.0_zh-CHS_692fbea5521e1304\CrystalDecisions.CrystalReports.Engine.resources.dll failed?
Build failed *.
Is most likely exceeded the maximum length of path of Windows (259 characters). Try to save the project to C:\PeachTree instead of C:\Program VMware Thinapp\Captures\...
-
LabVIEW Embedded for ARM build fails
I use the LabVIEW Embedded module for ARM microcontrollers with the
The EK-luminary LM3S8962 Evaluation Committee.When I try to build/run vi as an example in the tutorial (pg 13, the start-up
doc) I get the following error: Build Failed. Build failed with errors.The result is the following:
Building target "LabVIEW".
mounting Startup.s...
compilation of RTX_Config.c...
.. \System\RTX_Config.c(157): error: #130: wait a "{}".
compilation of Retarget.c...
compilation of TargetInit.c...
compilation of ARM_irq.c...
compilation of ARM_RTClock.c...
compilation of ARM_Serial.c...
compilation of EKLM3S8962_Display.c...
compilation of LM3S_EMAC.c...
D:\Program NIUninstaller Instruments\LabVIEW
8.6\Targets\Keil\Embedded\RealView\Drivers\RL-ARM\Include
\RLARM_Net_Config.h(31)
: error: #256: invalid redeclaration of type name "S8" (reported on line
37 of
"d:\Keil\ARM\RV31\INC\RTL.h")
compilation of ARM_I2C.c...
compilation of ARM_SPI.c...
compilation of LM3S_Pins.c...
compilation of LVCGenIntInit.c...
compilation of Untitled_ARM.c...
compilation of lvEmbeddedMain.c...
<-----snip------>
compilation of RLARM_CAN_Wrapper.c...
Target not createdYou forgot to tell us about your version of MDK - ARM (perhaps MDK 3.5 +).
Open Keil uVision and double-click these errors:.. \System\RTX_Config.c(157): error: #130: wait a "{}".
Just move __task at the beginning of this line
__task void os_idle_demon (void) {}To make a permanent change, you could also modify the
\Targets\Keil\Embedded\RealView\EK-LM3S8962\Template\System\ RTX_Config.c -----snip------>\RLARM_Net_Config.h(31)
: error: #256: invalid redeclaration of type name "S8" (reported on line 37 of "d:\Keil\ARM\RV31\INC\RTL.h")
Comment out the line:
typedef char S8; / * defined elsewhere from MDK 3.5*.It will be for good.
-
I get the above error while deploying the blackberry Simulator application. I have
Download the Java SDK 1.7, Apache Ant, BlackBerry WebWorks Smartphone SDK (OS 7 or earlier) and
PhoneGap 2.8.1.I put in JDK and Ant path in environment variables.The project is to build successfully in the directory of the project with the command "ant blackberry construction."
Generation of blackberry D:\ProjectBB>ant
BuildFile: D:\ProjectBB\build.xml
BlackBerry:
Update:
generate-cod-name:
[echo] Generated name: __NAME__.cod
clean:
[Remove] Delete the D:\ProjectBB\build directory
package-app:
[mkdir] Created dir: D:\ProjectBB\build\widget
[copy] Copy of 22 files to D:\ProjectBB\build\widget
[zip] Building zip: D:\ProjectBB\build\__NAME__.zip
Update:
[exec] [INFO] Parsing of the command line options
[exec] [ERROR] Invalid application - archive name of archive is not valid
BUILD SUCCESSFULLY
Total time: 4 secondsWhile deploying Simulator using 'ant blackberry simulator load' command in the command prompt, it
shows build failed with the error message "StandardInstall does not exist.Responsible for blackberry D:\ProjectBB>Ant-Simulateur
BuildFile: D:\ProjectBB\build.xml
BlackBerry:
Load Simulator:
generate-cod-name:
[echo] Generated name: __NAME__.cod
clean:
[Remove] Delete the D:\ProjectBB\build directory
package-app:
[mkdir] Created dir: D:\ProjectBB\build\widget
[copy] Copy of 22 files to D:\ProjectBB\build\widget
[zip] Building zip: D:\ProjectBB\build\__NAME__.zip
Update:
[exec] [INFO] Parsing of the command line options
[exec] [ERROR] Invalid application - archive name of archive is not valid
Load Simulator:
[echo] Simulator directory = C:\Program Files\Research in Motion\BlackBerry WebWorks SDK
2.3.1.5\simpack\7.0.0.318
[echo] Simulator directory = C:\Program Files\Research in Motion\BlackBerry WebWorks SDK
2.3.1.5\simpack\7.0.0.318
[echo] Simulator of executable = C:\Program Files\Research in Motion\BlackBerryWebWorks SDK
2.3.1.5\simpack\7.0.0.318/9930.bat
[echo] All simulators of closing...
[exec] No sessions running.
[exec] Result: 1
[echo] MDS directory = C:\Program Files\Research in Motion\BlackBerry WebWorks SDK 2.3.1.5/mds
BUILD FAILED
D:\ProjectBB\build.XML:51: The following error occurred when executing
This line:
D:\ProjectBB\blackberry.XML:153: D:\ProjectBB\build\StandardInstall does not exist.Total time: 7 seconds
Please help me solve this problem
Thanks in advance
For the version of the SDK BlackBerry Smartphone (i.e. BBOS), please note that you need JDK1.6 and there are also 32 bits.
Can you please try this change (uninstall previous versions of the JDK/JRE) and only install JDK1.6 32-bit (it will automatically install the JRE too.)
As well, I see a problem in the community newspapers:
[exec] [ERROR] Invalid application - archive name of archive is not valid
There seems to be a problem with the name of the ZIP file:
__Name__.zipCan you please try to remove the symbols _ the name of the archive?
-
Android processDebugResources Build failed
I am trying to build a simple web for Android. It has been developed with the Phonegap desktop application and excerpts are fine. But seems impossible to build online. Compiles without error Windows app, but Android version always gives the same error (failure of execution of the task ': ' processDebugResources)
This is the full changelog:
Construction date: 2016-08-09 06:39:02 + 0000
--------------------------------------------------------------------------------
OUTPUT OF THE PLUGIN
--------------------------------------------------------------------------------
--------------------------------------------------------------------------------
COMPILATION OUTPUT
--------------------------------------------------------------------------------
Observed the package id ' build-tools; 23.0.1' incompatible location ' / android-sdk/build-tools/current ' (expected ' / android-sdk/build-tools/23.0.1')
Already observed package IDs ' build-tools; 23.0.1' in ' / android-sdk/build-tools/23.0.1'. Skip duplicate to "/ android-sdk/build-tools/current '.
Java incremental compilation is a feature in incubation.
: pre-compiled updated
: preDebugBuild updated
: checkDebugManifest
: CordovaLib:preBuild updated
: CordovaLib:preDebugBuild updated
: CordovaLib:compileDebugNdk updated
: CordovaLib:compileLint
: CordovaLib:copyDebugLint updated
: CordovaLib:mergeDebugProguardFiles
: CordovaLib:packageDebugRenderscript updated
: CordovaLib:checkDebugManifest
: CordovaLib:prepareDebugDependencies
: CordovaLib:compileDebugRenderscript
: CordovaLib:generateDebugResValues
: CordovaLib:generateDebugResources
: CordovaLib:packageDebugResources
: CordovaLib:compileDebugAidl
: CordovaLib:generateDebugBuildConfig
: CordovaLib:mergeDebugShaders
: CordovaLib:compileDebugShaders
: CordovaLib:generateDebugAssets
: CordovaLib:mergeDebugAssets
: CordovaLib:processDebugManifest
: CordovaLib:processDebugResources
: CordovaLib:generateDebugSources
: CordovaLib:incrementalDebugJavaCompilationSafeguard
: CordovaLib:compileDebugJavaWithJavac
: CordovaLib:compileDebugJavaWithJavac - is not progressive (for example outputs have changed, no previous execution, etc.).
Note: Some input files use or replace an obsolete API.
Note: Recompile with - Xlint: deprecation for more details.
: CordovaLib:processDebugJavaRes updated
: CordovaLib:transformResourcesWithMergeJavaResForDebug
: CordovaLib:transformClassesAndResourcesWithSyncLibJarsForDebug
: CordovaLib:mergeDebugJniLibFolders
: CordovaLib:transformNative_libsWithMergeJniLibsForDebug
: CordovaLib:transformNative_libsWithSyncJniLibsForDebug
: CordovaLib:bundleDebug
: prepareProjectCordovaLibUnspecifiedDebugLibrary
: prepareDebugDependencies
: compileDebugAidl
: compileDebugRenderscript
: generateDebugBuildConfig
: mergeDebugShaders
: compileDebugShaders
: generateDebugAssets
: mergeDebugAssets
: generateDebugResValues
: generateDebugResources
: mergeDebugResources
: processDebugManifest
: processDebugResources FAILED
FAILED: Build failed with an exception.
* What went wrong:
The execution of the task failed ': ' processDebugResources.
> com.android.ide.common.process.ProcessException: org.gradle.process.internal.ExecException: process 'command' /android-sdk/build-tools/23.0.1/aapt "finished with the value 1 at zero output
* Try:
Run with the option - stacktrace to get stack trace. Run with the option - info or - debug option to get out of the newspaper.
BUILD FAILED
Total time: 1 mn dry 2,201
Error: / project/gradlew: command failed with error code 1 output output:
Note: Some input files use or replace an obsolete API.
Note: Recompile with - Xlint: deprecation for more details.
FAILED: Build failed with an exception.
* What went wrong:
The execution of the task failed ': ' processDebugResources.
> com.android.ide.common.process.ProcessException: org.gradle.process.internal.ExecException: process 'command' /android-sdk/build-tools/23.0.1/aapt "finished with the value 1 at zero output
* Try:
Run with the option - stacktrace to get stack trace. Run with the option - info or - debug option to get out of the newspaper.
at ChildProcess.whenDone (/ project/cordova/node_modules/cordova-common/src/superspawn.js:169:23)
at emitTwo (events.js:87:13)
at ChildProcess.emit (events.js:172:7)
to maybeClose (internal / child_process.js:818:16)
to Process.ChildProcess._handle.onexit (internal / child_process.js:211:5)
I'm now compile without error. Looks like some images were too long names / bad characters. I changed them to something like 00.jpg, t00.jpg or 01.jpg... and it compiles without problems.
wyattp35682249, I use the structure generated by the Phonegap (/res and /spec folders) desktop application. Just changed the png, leaving the same names.
-
BUILD FAILED during installation FusionOrderDemo_R1PS4
I followed this tutorial
Oracle® Fusion Middleware tutorial for the race and the generation of an Application with Oracle SOA Suite 11 g Release 1 (11.1.1) 10275-02
and at this stage 2.1.3 task 3: deploy the Application demo WebLogic Fusion I came across the problem. The previous steps are completed correctly.
I checked this post, but they have not helped me.
https://community.Oracle.com/thread/2281082?start=0
I have the same problem: cannot get the data source connection: java.sql.SQLException: ORA-01017: name of user and password invalid; denied connection
Journal of Ant file is here:
-----------------------
BuildFile: D:\DOWNLOADS\SOA 11gR1\FusionOrderDemo_R1PS4\CompositeServices\bin\build.xml
[echo] Ant: Apache Ant version 1.7.1 compiled Java on June 27, 2008: 1.6
[echo] Using mds-type: db
entry entry jump as server.password property has already been set.
init:
[echo] Version of SOA Suite 11g:
[java]
[java] *****************************************************************************
[java] Oracle SOA Server version 11.1.1.5.0
[java] Build: 0
[java] The generation time: my Apr 18 18:05:14 PDT 2011
[java] Build type: free
[java] Tag from the source: PCBPEL_11.1.1.5.0_GENERIC_110418.1550.0174
[java]
[echo] soa infrastructure mgmt home: D:\Middleware\JDev11gR1PS4\jdeveloper\
setupWorkspaceForJdeveloperUse:
[echo]! Implementation of workspace for JDeveloper, where seedlings adf-config, connections.xml and filling mds
[echo] Ant: Apache Ant version 1.7.1 compiled Java on June 27, 2008: 1.6
[echo] Using mds-type: db
entry entry jump as server.password property has already been set.
init:
[echo] Version of SOA Suite 11g:
[java]
[java] *****************************************************************************
[java] Oracle SOA Server version 11.1.1.5.0
[java] Build: 0
[java] The generation time: my Apr 18 18:05:14 PDT 2011
[java] Build type: free
[java] Tag from the source: PCBPEL_11.1.1.5.0_GENERIC_110418.1550.0174
[java]
[echo] soa infrastructure mgmt home: D:\Middleware\JDev11gR1PS4\jdeveloper\
createMDSConnections:
[echo] Ant: Apache Ant version 1.7.1 compiled Java on June 27, 2008: 1.6
[echo] Using mds-type: db
entry entry jump as server.password property has already been set.
createMDSConnectionForDB:
[echo] Creation... /. ADF/META-INF/ADF-config.xml for the MDS supported database
entry entry jump as mds.db.password property has already been set.
[copy] Copying 1 file to D:\DOWNLOADS\SOA 11gR1\FusionOrderDemo_R1PS4\CompositeServices\.adf\META-INF
[echo] With the help of jdbc:oracle:thin:@192.168.1.100:1521:xe for storage based on db, with the user cutschig_mds
[echo] Ant: Apache Ant version 1.7.1 compiled Java on June 27, 2008: 1.6
[echo] Using mds-type: db
entry entry jump as server.password property has already been set.
createMDSConnectionForFileStore:
[echo] Ant: Apache Ant version 1.7.1 compiled Java on June 27, 2008: 1.6
[echo] Using mds-type: db
entry entry jump as server.password property has already been set.
createMDSConnectionForServerFileStore:
importCommonServiceArtifactsIntoMds:
[java] Starting import from file system local to the mds...
[java] oracle.mds.config.MDSConfigurationException: MDS-01330: cannot load the MDS configuration document
[java] MDS-01329: cannot load the item "persistence-config".
[java] MDS-01370: Configuration of MetadataStore for metadata-store-use 'mstore-usage_1"is not valid.
[java] MDS-01259: the metadata store 'oracle.mds.persistence.stores.db.DBMetadataStore' cannot be instantiated.
[java] MDS-00003: error connecting to the database
[java] Exception occurred while getting connection: oracle.ucp.UniversalConnectionPoolException: cannot get data source connection: java.sql.SQLException: ORA-01017: name of user and password invalid. connection refused
[java]
[java] Cannot get data source connection: java.sql.SQLException: ORA-01017: name of user and password invalid. connection refused
[java]
[java] Cannot get data source connection: java.sql.SQLException: ORA-01017: name of user and password invalid. connection refused
[java]
[java]
[java] at oracle.mds.config.PConfig.loadFromBean(PConfig.java:690)
[java] at oracle.mds.config.PConfig. < init > (PConfig.java:499)
[java] at oracle.mds.config.MDSConfig.loadFromBean(MDSConfig.java:707)
[java] at oracle.mds.config.MDSConfig.loadFromElement(MDSConfig.java:764)
[java] at oracle.mds.config.MDSConfig. < init > (MDSConfig.java:515)
[java] at oracle.mds.config.MDSConfig. < init > (MDSConfig.java:443)
[java] at com.otn.sample.fod.soa.util.MdsImportTask.getTargetMdsInstanceByAdfConfig(MdsImportTask.java:133)
[java] at com.otn.sample.fod.soa.util.MdsImportTask.execute(MdsImportTask.java:155)
[java] at com.otn.sample.fod.soa.util.MdsImportTask.main(MdsImportTask.java:84)
[java] Caused by: oracle.mds.exception.MDSExceptionList: SDM-01329: cannot load the item "persistence-config".
[java] MDS-01370: Configuration of MetadataStore for metadata-store-use 'mstore-usage_1"is not valid.
[java] MDS-01259: the metadata store 'oracle.mds.persistence.stores.db.DBMetadataStore' cannot be instantiated.
[java] MDS-00003: error connecting to the database
[java] Exception occurred while getting connection: oracle.ucp.UniversalConnectionPoolException: cannot get data source connection: java.sql.SQLException: ORA-01017: name of user and password invalid. connection refused
[java]
[java] Cannot get data source connection: java.sql.SQLException: ORA-01017: name of user and password invalid. connection refused
[java]
[java] Cannot get data source connection: java.sql.SQLException: ORA-01017: name of user and password invalid. connection refused
[java]
[java]
[java] at oracle.mds.config.PConfig.loadFromBean(PConfig.java:684)
[java]... 8 more
[java] Exception in thread "main" SDM-01330: cannot load the MDS configuration document
[java] MDS-01329: cannot load the item "persistence-config".
[java] MDS-01370: Configuration of MetadataStore for metadata-store-use 'mstore-usage_1"is not valid.
[java] MDS-01259: the metadata store 'oracle.mds.persistence.stores.db.DBMetadataStore' cannot be instantiated.
[java] MDS-00003: error connecting to the database
[java] Exception occurred while getting connection: oracle.ucp.UniversalConnectionPoolException: cannot get data source connection: java.sql.SQLException: ORA-01017: name of user and password invalid. connection refused
[java]
[java] Cannot get data source connection: java.sql.SQLException: ORA-01017: name of user and password invalid. connection refused
[java]
[java] Cannot get data source connection: java.sql.SQLException: ORA-01017: name of user and password invalid. connection refused
[java]
[java]
[java] at com.otn.sample.fod.soa.util.MdsImportTask.execute(MdsImportTask.java:225)
[java] at com.otn.sample.fod.soa.util.MdsImportTask.main(MdsImportTask.java:84)
BUILD FAILED
D:\DOWNLOADS\SOA 11gR1\FusionOrderDemo_R1PS4\CompositeServices\bin\build.xml:276: the following error occurred during the execution of this line:
D:\DOWNLOADS\SOA 11gR1\FusionOrderDemo_R1PS4\CompositeServices\bin\common-sca-tools.xml:414: Java returned: 1
Total time: 2 seconds
-----------------------
I checked the database and the user is dev_soainfra. Should not be cutschig_mds with password soainfra user here?
Anyway, here's my build.properties file
-----------
####################################################################
# Property overall build set for SOA fusion order demo #.
# > author: clemens utschig (oracle Corp.) 2009 #.
####################################################################
# path of libraries and script imports
# oracle.home=C:\\JDeveloper\\11.1.1.3\\jdeveloper\\
Oracle.Home=D:/middleware/JDev11gR1PS4/JDeveloper
# PROPERTIES OF THE SEED INTERNALLY - START #.
# #
# !!!!! DO NOT CHANGE! #
# #
####################################################################
Internal version number #.
FOD.version = 2.3_ps3
common libs of # home
Oracle.Common.Home=${Oracle.Home}/... /oracle_common
# Sub directory of the deployment artifacts
deploy. Sub.dir = deploy
# Sub Directory deployment / build scripts
bin. Sub.dir = Bin
# jee homes application
creditauthorization. Home =... / CreditCardAuthorization
orderapproval. Home =... / OrderApprovalHumanTask
External.partnersupplier.Home =... / ExternalLegacyPartnerSupplierEjb
composite homes #.
orderbookingsdo.composite.Home=../OrderSDOComposite
partnersupplier.composite.Home=../PartnerSupplierComposite
orderbooking.composite.Home=../OrderBookingComposite
B2B.composite.home=../B2BX12OrderGateway
# adf service implementation context url
storefrontservice.contextUri.adf=StoreFrontServiceHooks/StoreFrontService
# sca composite according to context url
storefrontservice.contextUri.soa=soa-infra/services/${soa.partition.name}/OrderSDOComposite!1.0/StoreFrontService
# uri for the ExternalPartnerSupplierEJB ejb
partnersupplier. EJB. URI = WebLogicFusionOrderDemo-ExternalLegacyPartnerSupplierEjb-SessionEJB #com.otn.sample.fod.soa.externalps.IExternalPartnerSupplierService
# ejb application via Spring C uri & I ExternalPartnerSupplierEJB JSca
partnersupplier. JSCA. EJB. URI = WebLogicFusionOrderDemo-ExternalLegacyPartnerSupplierJScaEjb
# global connection to deploy settings, rmi and other
# admin server t3: / / url - deployment
WLS. URL = T3: / / ${admin. Server.Host}: ${admin. Server.port}
# mgd Server t3: / / url - EJB
WLS. MGD. Server.URL=T3://${Managed.Server.Host}:${Managed.Server.rmi.port}
# ctx jndi factory
Java.naming.Factory.initial = WebLogic.JNDI.WLInitialContextFactory
# THE INTERNAL - END SEED PROPERTIES #.
partition # where composites are needed to
SOA.partition.Name = soaFusionOrderDemo
# set to false if you want to use the adf supported services.
SOA. Only.Deployment = false
# deploy the b2b x 12 order composite transformation
Enable.B2B.composite = true
# use a normal ejb3 for the provider external partner (comment or set to false).
# or use the new SCA Weblogic for Java EJB binding (uncomment and set to true)
use. JSCA. EJB.impl = true
Directory of the # file adapter - change your operating system (use-for windows and / for unix)
orderbooking.file.adapter.dir=/tmp
Directory control adapter # file - change your operating system (use-for windows and unix)
orderbooking.file.adapter.Control.dir=/tmp/Control
# jndi name of the jms for composite orderbooking topic
orderbooking. JMS.topic.JNDI=JMS/DemoSupplierTopicUdd
# Connection information for the deployment server
# connection information in server admin - to start topics
Admin. Server.Host = localhost
Admin. Server.port = 7001
# the area where soa infrastructure is installed
Server.domain.Name = soainfra
login # managed server, used for soa deployment, http
Managed.Server.Host = localhost
Managed.Server.port = 8001
test port # for rmi, ejb invocation and other
Managed.Server.rmi.port = 8001
credentials for servers
Server.User = WebLogic
Server.Password = Welcome1
target server # wls (for the value server_soa, EIM use AdminServer shiphome)
Server.targets = soa_server1
# soa-server side oracle directory - necessary for the deployment plans
# and the deployment of sca weblogic (on the ExternalPartnerSupplier project library
SOA. Server.Oracle.Home=/Scratch/cutschig/fmwhome/AS11gR1SOA
# business test event - it's the business event queue
user name of the diagram main db soa #.
SOA.db.UserName = cutschig_soainfra
# soa db password
SOA.db.Password = soainfra
# soa db = connection string > host: port: sid
SOA.db.ConnectString = localhost:1521:XE
# MetaDataServices repository (used for SOA artifacts) shared settings #.
# use 'jdev' for jdeveloper local install, "db" for the database
# In case of 'db' change below (jdbc) parameters for the mds db
Foreign.MDS.type = DB
# Note: Before you deploy are of course you change these settings to your REMOTE
# db - what is strips soa-infra, set the mds.type above for 'db' and run
# the target of "importCommonServiceArtifactsIntoMds". This will import the common
# shared artifacts of $OH/bin/soa-seeds / in the mds (RT) distance.
# A shiphome install that this user is normally named sh_mds
MDS.db.UserID = cutschig_mds
MDS.db.Password = soainfra
database connection string #: driver@host:port:sid
MDS.db.JDBC-URL=jdbc:Oracle:Thin:@localhost:1521:XE
#mds.db.jdbc-url=jdbc:oracle:thin:@192.168.1.100:1521:xe
--------------
I put this password: nenad12345 everywhere while setting SOA according to previous tutorial Quick Start Guide for Oracle® SOA Suite 11 g 1 material (11.1.1.5.0) Version 1.3
Until that moment, I have not had any problems with him.
credentials for servers
Server.User = WebLogic
Server.Password = nena12345
This reclassification:
target server # wls (for the value server_soa, EIM use AdminServer shiphome)
Server.targets = soa_server1
Should I leave this soa_server1 way or should I name as
Server.targets = SOAOSBPS4DevDomain
in the previous tutorial, it's how I named domain/server?
I found what the problem was:
First of all, I used build.xml right click, Run Ant target, validateFodConfigSettings
On a few iterations on it, I found that were mistakes, and finally the output is as follows:
BuildFile: D:\DOWNLOADS\SOA 11gR1\FusionOrderDemo_R1PS4\CompositeServices\bin\build.xml
[echo] Ant: Apache Ant version 1.7.1 compiled Java on June 27, 2008: 1.6
[echo] Using mds-type: db
entry entry jump as server.password property has already been set.
init:
[echo] Version of SOA Suite 11g:
[java]
[java] *****************************************************************************
[java] Oracle SOA Server version 11.1.1.5.0
[java] Build: 0
[java] The generation time: my Apr 18 18:05:14 PDT 2011
[java] Build type: free
[java] Tag from the source: PCBPEL_11.1.1.5.0_GENERIC_110418.1550.0174
[java]
[echo] soa infrastructure mgmt home: D:\Middleware\JDev11gR1PS4\jdeveloper\
createMDSConnections:
[echo] Ant: Apache Ant version 1.7.1 compiled Java on June 27, 2008: 1.6
[echo] Using mds-type: db
entry entry jump as server.password property has already been set.
createMDSConnectionForDB:
[echo] Creation... /. ADF/META-INF/ADF-config.xml for the MDS supported database
entry entry jump as mds.db.password property has already been set.
[copy] Copying 1 file to D:\DOWNLOADS\SOA 11gR1\FusionOrderDemo_R1PS4\CompositeServices\.adf\META-INF
[echo] With the help of jdbc:oracle:thin:@localhost:1521:xe for storage based on db, with the user dev_mds
[echo] Ant: Apache Ant version 1.7.1 compiled Java on June 27, 2008: 1.6
[echo] Using mds-type: db
entry entry jump as server.password property has already been set.
createMDSConnectionForFileStore:
[echo] Ant: Apache Ant version 1.7.1 compiled Java on June 27, 2008: 1.6
[echo] Using mds-type: db
entry entry jump as server.password property has already been set.
createMDSConnectionForServerFileStore:
validateFodConfigSettings:
[echo] Validation of fod through wlst configuration settings
[copy] Copying 1 file to D:\DOWNLOADS\SOA 11gR1\FusionOrderDemo_R1PS4\CompositeServices\bin
[java]
[java] WebLogic Scripting Tool (WLST) initializing...
[java]
[java] Welcome to WebLogic Server Administration scripts Shell
[java]
[java] Help() type help on the available commands
[java]
[java] Checking DOM settings... - admin server: localhost port: 7001
[java] T3 connection: / / localhost:7001 with username weblogic...
[java] Connected to the Server Admin "AdminServer" which belongs to the domain "SOAOSBPS4DevDomain".
[java]
[java] WARNING: A non-secure protocol was used to connect to the
Server [java]. To ensure the safety of on-the-wire, the SSL port or
[java] Admin port should be used instead.
[java]
[java] Connection to the managed server target: Server/AdminServer
[java] [MBeanServerInvocationHandler] com.bea:Name = AdminServer, Type = Server
[java] Check status of the managed server - must run
[java] Checking of the managed server listening port - build properties: 7001
[java] Sending ping to localhost:7001 - soa-infra app
[java] Answer: 302
[java] Now to the tree of domainRuntime. It is a tree read-only with DomainMBean as the root.
[java] For further assistance, use the help (domainRuntime)
[java]
[java] Domain name: SOAOSBPS4DevDomain
[java] All the tests - ready to install Fusion order demo for SOA Suite 11 g
[Remove] Delete: D:\DOWNLOADS\SOA 11gR1\FusionOrderDemo_R1PS4\CompositeServices\bin\checkFODSettings.py
[java] Mds configuration validation running
[java] Got mds-instance target: mstore-usage_1 D:\DOWNLOADS\SOA 11gR1\FusionOrderDemo_R1PS4\CompositeServices\bin\... \.adf\META-INF\adf-config. XML
[java] Tests of connection for foreign mds succeeded
BUILD SUCCESSFULLY
Total time: 4 seconds
----------------
There is new file build.properties
####################################################################
# Property overall build set for SOA fusion order demo #.
# > Author: clemens utschig (oracle Corp.) 2009 #.
####################################################################
# path of libraries and script imports
# oracle.home=C:\\JDeveloper\\11.1.1.3\\jdeveloper\\
Oracle.Home=D:/middleware/JDev11gR1PS4/JDeveloper
# PROPERTIES OF THE SEED INTERNALLY - START #.
# #
# !!!!! DO NOT CHANGE! #
# #
####################################################################
Internal version number #.
FOD.version = 2.3_ps3
common libs of # home
Oracle.Common.Home=${Oracle.Home}/... /oracle_common
# Sub directory of the deployment artifacts
deploy. Sub.dir = deploy
# Sub Directory deployment / build scripts
bin. Sub.dir = Bin
# jee homes application
creditauthorization. Home =... / CreditCardAuthorization
orderapproval. Home =... / OrderApprovalHumanTask
External.partnersupplier.Home =... / ExternalLegacyPartnerSupplierEjb
composite homes #.
orderbookingsdo.composite.Home=../OrderSDOComposite
partnersupplier.composite.Home=../PartnerSupplierComposite
orderbooking.composite.Home=../OrderBookingComposite
B2B.composite.home=../B2BX12OrderGateway
# adf service implementation context url
storefrontservice.contextUri.adf=StoreFrontServiceHooks/StoreFrontService
# sca composite according to context url
storefrontservice.contextUri.soa=soa-infra/services/${soa.partition.name}/OrderSDOComposite!1.0/StoreFrontService
# uri for the ExternalPartnerSupplierEJB ejb
partnersupplier. EJB. URI = WebLogicFusionOrderDemo-ExternalLegacyPartnerSupplierEjb-SessionEJB #com.otn.sample.fod.soa.externalps.IExternalPartnerSupplierService
# ejb application via Spring uri C & I ExternalPartnerSupplierEJB JSca
partnersupplier. JSCA. EJB. URI = WebLogicFusionOrderDemo-ExternalLegacyPartnerSupplierJScaEjb
# global connection to deploy settings, rmi and other
# admin server t3: / / url - deployment
WLS. URL = T3: / / ${admin. Server.Host}: ${admin. Server.port}
# mgd Server t3: / / url - EJB
WLS. MGD. Server.URL=T3://${Managed.Server.Host}:${Managed.Server.rmi.port}
# ctx jndi factory
Java.naming.Factory.initial = WebLogic.JNDI.WLInitialContextFactory
# THE INTERNAL - END SEED PROPERTIES #.
partition # where composites are needed to
SOA.partition.Name = soaFusionOrderDemo
# set to false if you want to use the adf supported services.
SOA. Only.Deployment = false
# deploy the b2b x 12 order composite transformation
Enable.B2B.composite = true
# use a normal ejb3 for the provider external partner (comment or set to false).
# or use the new SCA Weblogic for Java EJB binding (uncomment and set to true)
use. JSCA. EJB.impl = true
Directory of the # file adapter - change your operating system (use-for windows and / for unix)
orderbooking.file.adapter.dir=/tmp
Directory control adapter # file - change your operating system (use-for windows and unix)
orderbooking.file.adapter.Control.dir=/tmp/Control
# jndi name of the jms for composite orderbooking topic
orderbooking. JMS.topic.JNDI=JMS/DemoSupplierTopicUdd
# Connection information for the deployment server
# connection information in server admin - to start topics
Admin. Server.Host = localhost
Admin. Server.port = 7001
# the area where soa infrastructure is installed
# server.domain.name = soainfra
Server.domain.Name = SOAOSBPS4DevDomain
login # managed server, used for soa deployment, http
Managed.Server.Host = localhost
Managed.Server.port = 8001
test port # for rmi, ejb invocation and other
Managed.Server.rmi.port = 8001
credentials for servers
Server.User = WebLogic
Server.Password = Welcome1
target server # wls (for the value server_soa, EIM use AdminServer shiphome)
# server.targets = soa_server1
Server.targets = adminserver
# soa-server side oracle directory - necessary for the deployment plans
# and the deployment of sca weblogic (on the ExternalPartnerSupplier project library
SOA. Server.Oracle.Home=/Scratch/cutschig/fmwhome/AS11gR1SOA
# business test event - it's the business event queue
user name of the diagram main db soa #.
# soa.db.username = cutschig_soainfra
SOA.db.UserName = dev_soainfra
# soa db password
# soa.db.password = soainfra
SOA.db.Password = Welcome1
chain-online host: port: sid # soa db connection
SOA.db.ConnectString = localhost:1521:XE
# MetaDataServices repository (used for SOA artifacts) shared settings #.
# use 'jdev' for jdeveloper local install, "db" for the database
# In case of 'db' change below (jdbc) parameters for the mds db
Foreign.MDS.type = DB
# Note: Before you deploy are of course you change these settings to your REMOTE
# db - what is strips soa-infra, set the mds.type above for 'db' and run
# the target of "importCommonServiceArtifactsIntoMds". This will import the common
# shared artifacts of $OH/bin/soa-seeds / in the mds (RT) distance.
# A shiphome install that this user is normally named sh_mds
#mds.db.userid = cutschig_mds
MDS.db.UserID = dev_mds
#mds.db.password = soainfra
MDS.db.Password = Welcome1
database connection string #: driver@host:port:sid
MDS.db.JDBC-URL=jdbc:Oracle:Thin:@localhost:1521:XE
#mds.db.jdbc-url=jdbc:oracle:thin:@192.168.1.100:1521:xe
---------
If the problems are here:
# the area where soa infrastructure is installed
# server.domain.name = soainfra
Server.domain.Name = SOAOSBPS4DevDomain
next problem:
target server # wls (for the value server_soa, EIM use AdminServer shiphome)
# server.targets = soa_server1
Server.targets = adminserver
next problem:
user name of the diagram main db soa #.
# soa.db.username = cutschig_soainfra
SOA.db.UserName = dev_soainfra
# soa db password
# soa.db.password = soainfra
SOA.db.Password = Welcome1
next problem:
#mds.db.userid = cutschig_mds
MDS.db.UserID = dev_mds
#mds.db.password = soainfra
MDS.db.Password = Welcome1
In the Quick Start Guide for Oracle SOA Suite 11 g 1 material (11.1.1.5.0)® user Version 1.3, servers and domains names are defined differently in this FOD demo application deployment tutorial.
I hope that this response will help anyone that reached other problems of this type when installing this demo application.
This problem is related to this messages:
SOA 11 g demo FOD deploy question -
PhoneGap build fail (perhaps android SDK Java changes?)
I use phongap build cli 6.0.0
Since last 24/03/2016 the build for my app Android fail, recent changes made in support of android sdk libraries in phonegap build there?
I'm building an application without problems until the day before... (23/03/2016)
I get the following error:
Construction date: 2016-03-25 08:24:03 + 0000
Download https://repo1.Maven.org/Maven2/com/parse/bolts/bolts-applinks/1.3.0/bolts-applinks-1.3.0.p om
Download https://repo1.Maven.org/Maven2/com/parse/bolts/bolts-tasks/1.3.0/bolts-tasks-1.3.0.Pom
FAILED: Build failed with an exception.
* What went wrong:
There was a problem the root project configuration 'project '.
> Cannot resolve all the dependencies configuration ': _debugCompile'.
> Not found com.android.support:support - v4:23.2.0.
Search in the following locations:
https://repo1.maven.org/maven2/com/android/support/support-v4/23.2.0/support-v4-23.2.0.pom
https://repo1.maven.org/maven2/com/android/support/support-v4/23.2.0/support-v4-23.2.0.jar
file:/Android-SDK/Extras/Android/m2repository/com/Android/support/support-v4/23.2.0/Suppo rt - v4 - 23.2.0.pom
file:/Android-SDK/Extras/Android/m2repository/com/Android/support/support-v4/23.2.0/Suppo rt - v4 - 23.2.0.jar
file:/Android-SDK/Extras/Google/m2repository/com/Android/support/support-v4/23.2.0/suppor t - v4 - 23.2.0.pom
file:/Android-SDK/Extras/Google/m2repository/com/Android/support/support-v4/23.2.0/suppor t - v4 - 23.2.0.jar
Required by:
: project: indeterminate > com.android.support:support - v13:23.1.0
> Not found com.android.support:support - v4:23.2.0.
Search in the following locations:
https://repo1.maven.org/maven2/com/android/support/support-v4/23.2.0/support-v4-23.2.0.pom
https://repo1.maven.org/maven2/com/android/support/support-v4/23.2.0/support-v4-23.2.0.jar
file:/Android-SDK/Extras/Android/m2repository/com/Android/support/support-v4/23.2.0/Suppo rt - v4 - 23.2.0.pom
file:/Android-SDK/Extras/Android/m2repository/com/Android/support/support-v4/23.2.0/Suppo rt - v4 - 23.2.0.jar
file:/Android-SDK/Extras/Google/m2repository/com/Android/support/support-v4/23.2.0/suppor t - v4 - 23.2.0.pom
file:/Android-SDK/Extras/Google/m2repository/com/Android/support/support-v4/23.2.0/suppor t - v4 - 23.2.0.jar
Required by:
: project: indeterminate > com.facebook.android:facebook - android - sdk:4.10.1
> Not found com.android.support:cardview - v7:23.2.0.
Search in the following locations:
https://repo1.maven.org/maven2/com/android/support/cardview-v7/23.2.0/cardview-v7-23.2.0.p om
ar https://repo1.maven.org/maven2/com/android/support/cardview-v7/23.2.0/cardview-v7-23.2.0.j
file:/Android-SDK/Extras/Android/m2repository/com/Android/support/CardView-v7/23.2.0/card view - v7 - 23.2.0.pom
file:/Android-SDK/Extras/Android/m2repository/com/Android/support/CardView-v7/23.2.0/card view - v7 - 23.2.0.jar
file:/Android-SDK/Extras/Google/m2repository/com/Android/support/CardView-v7/23.2.0/cardv iew - v7 - 23.2.0.pom
file:/Android-SDK/Extras/Google/m2repository/com/Android/support/CardView-v7/23.2.0/cardv iew - v7 - 23.2.0.jar
Required by:
: project: indeterminate > com.facebook.android:facebook - android - sdk:4.10.1
> Not found com.android.support:support - v4:23.2.0.
Search in the following locations:
https://repo1.maven.org/maven2/com/android/support/support-v4/23.2.0/support-v4-23.2.0.pom
https://repo1.maven.org/maven2/com/android/support/support-v4/23.2.0/support-v4-23.2.0.jar
file:/Android-SDK/Extras/Android/m2repository/com/Android/support/support-v4/23.2.0/Suppo rt - v4 - 23.2.0.pom
file:/Android-SDK/Extras/Android/m2repository/com/Android/support/support-v4/23.2.0/Suppo rt - v4 - 23.2.0.jar
file:/Android-SDK/Extras/Google/m2repository/com/Android/support/support-v4/23.2.0/suppor t - v4 - 23.2.0.pom
file:/Android-SDK/Extras/Google/m2repository/com/Android/support/support-v4/23.2.0/suppor t - v4 - 23.2.0.jar
Required by:
: project: indeterminate > com.google.android.gms:play - services-Analytics: 8.4.0 > com.google.android.gms:play - services-under-ground: 8.4.0
* Try:
Run with the option - stacktrace to get stack trace. Run with the option - info or - debug option to get out of the newspaper.
BUILD FAILED
Total time: dry 5,785
undefined
Support Android library updated 23.2.0 on the PhoneGap Build that fixes this problem.
If you now receive this error:
use - sdk:minSdkVersion 14 cannot be less than the declared 15 version in the project/build/intermediates/exploded-aar/com.facebook.android/facebook-android-sdk/4.10 library. 1/AndroidManifest.Xml
You can also set your project to 15 minSdkVersion or more:
The cause of this was the update to its android library dependecy facebook-android-sdk version supported.
-
Windows build fails when add 'cordova-plugin-camera' + 'cordova-plugin-contacts'
all the details here
Windows build fails when add 'cordova-plugin-camera' + 'cordova-plugin-contacts'
Resolved in the thread on the GS.
-
Build fails on ESXi - fault. RestrictedVersion.summary
Hi all
I have a problem running the build process on an ESXi 4.0 in my lab with VMware Studio 2.1.
I have several faults. RestrictedVersion.summary errors, the first is:
20/02/2011 11:34:07 [warn] error ReconfigVM:
SOAP fault:
-----------
Error string: error. RestrictedVersion.summary
Lack of details: RestrictedVersionFault
20/02/2011 11:34:07 [warn] Impossible to reconfigure boot delay for VM transition
20/02/2011-11:34:07 [error] met a unrecoverable build error!After that almost every line of the error is the error RestrictedVersion the end of it.
I've seen a few threads talking about a free version of ESXi with these errors, but they were for VMware Studio 2.0 in beta, so I don't know if they are relevant to my case.
Also, I didn't see any known problem or a problem of compatibility in the 2.1 release notes.
This is a full release of the file debug.log from the first line of the error:
20/02/2011 11:33:57 [dbug] VM completed transport.
20/02/2011-11:33:57 [info] checking if the XX. XX. XX. XX connection is still active...
20/02/2011 11:33:57 [dbug] reconfiguration VM on the host configuration.
20/02/2011 11:34:07 [warn] error ReconfigVM:
SOAP fault:
-----------
Error string: error. RestrictedVersion.summary
Lack of details: RestrictedVersionFault
20/02/2011 11:34:07 [warn] Impossible to reconfigure boot delay for VM transition
20/02/2011-11:34:07 [error] met a unrecoverable build error!
20/02/2011-11:34:07 [info]
20/02/2011-11:34:07 [info]
20/02/2011 11:34:07 [info] cleaning...
20/02/2011 11:34:07 [info] cleaning of provisioning host...
20/02/2011-11:34:07 [info] checking if the XX. XX. XX. XX connection is still active...
20/02/2011-11:34:07 [info] checking if the XX. XX. XX. XX connection is still active...
20/02/2011 11:34:07 [dbug] Unregistering < XX. XX. XX. XX_BUILD_NAME > of < XX. XX. XX. XX >.
20/02/2011 11:34:08 [warn] error UnregisterVM:
SOAP fault:
-----------
Error string: error. RestrictedVersion.summary
Lack of details: RestrictedVersionFault
20/02/2011 11:34:08 [info] transitional VM withdrawal of configuration host.
20/02/2011-11:34:08 [warn] cannot delete < XX [DATASTORE_NAME]. XX. XX. XX_BUILD_NAME > of < XX. XX. XX. XX >: fault. RestrictedVersion.summary
20/02/2011-11:34:08 [warn] impossible to removed the data store VM
20/02/2011-11:34:08 [dbug] wait 10 seconds before starting again...
20/02/2011-11:34:18 [info] checking if the XX. XX. XX. XX connection is still active...
20/02/2011 11:34:18 [info] transitional VM withdrawal of configuration host.
20/02/2011-11:34:18 [warn] cannot delete < XX [DATASTORE_NAME]. XX. XX. XX_BUILD_NAME > of < XX. XX. XX. XX >: fault. RestrictedVersion.summary
20/02/2011-11:34:18 [warn] impossible to removed the data store VM
20/02/2011 11:34:18 [dbug] < ESX > logout.
20/02/2011 11:34:18 [info] cleaning of provisioning host...
20/02/2011 11:34:18 [dbug] < ESX > logout.
20/02/2011 11:34:18 [dbug] deleting a link symbolic opt/vmware/www/build/.0.
20/02/2011 11:34:18 [info] deleting temporary files.
20/02/2011 11:34:18 [dbug] deletion of a file tree/opt/vmware/www/build/BUILD_NAME/will20/02/2011 11:34:18 [dbug] shell system Ran command "rm - rf/opt/vmware/www/build/BUILD_NAME/will 2 >/tmp/zebp2k5fnb".
20/02/2011 11:34:18 [dbug] returned system shell command: output 0, 0, 0 basic signals
20/02/2011 11:34:18 [dbug] deletion of a file tree/opt/vmware/www/build/BUILD_NAME/install20/02/2011 11:34:18 [dbug] shell system Ran command "rm - rf/opt/vmware/www/build/BUILD_NAME/install 2 >/tmp/4xtv2JYMJe".
20/02/2011 11:34:18 [dbug] returned system shell command: output 0, 0, 0 basic signals
20/02/2011 11:34:18 [dbug] deletion of a file tree/opt/vmware/www/build/BUILD_NAME/repo20/02/2011 11:34:18 [dbug] shell system Ran command "rm - rf/opt/vmware/www/build/BUILD_NAME/repo 2 >/tmp/gdoAWfKyCE".
20/02/2011 11:34:18 [dbug] returned system shell command: output 0, 0, 0 basic signals
20/02/2011 11:34:18 [dbug] deletion of a file tree/opt/vmware/www/build/BUILD_NAME/customize
20/02/2011 11:34:18 [dbug] shell system Ran command "rm - rf/opt/vmware/www/build/BUILD_NAME/customize 2 >/tmp/zKErK753Vz".
20/02/2011 11:34:18 [dbug] returned system shell command: output 0, 0, 0 basic signals
20/02/2011 11:34:18 [dbug] deletion of a file tree/opt/vmware/www/build/BUILD_NAME/script20/02/2011 11:34:18 [dbug] shell system Ran command "rm - rf/opt/vmware/www/build/BUILD_NAME/script 2 >/tmp/ASdXoBrSNM".
20/02/2011 11:34:18 [dbug] returned system shell command: output 0, 0, 0 basic signals
20/02/2011-11:34:18 [info] Build/Validation successfully interrupted the process.I have edited a few customer information like IP address and names to build.
I'd appreciate your thoughts on them.
Thank you
Yair
Welcome to the community,
the reason for the error is indeed the free version of ESXi.
of http://www.vmware.com/support/developer/studio/studio21/studio_developer.pdf
The build fails with the following error string:
fault. RestrictedVersion.summary
Put into service through ESXi with free ESXi license generates this error because ESX capabilities required for commissioning are not available. The evaluation of ESXi license (which ends in a given period of time) or a paid license will solve this problem.
André
-
Build failed while credentials of the application migration, to standaloneWLS.
I use jdeveloper 11g update 2 and Weblogic10.3
I am migrating the credentials and policies for Standalone WebLogic.
I'm following the link:
http://www.Oracle.com/technology/products/jdev/tips/Muench/credmig111100/index.html
3.2 step migration request credentials to Standalone WebLogic:
When I'm trying to run the command:
$ ant-Dapp-credstore=APPWORKSPACEDIR/src/META-INF/cwallet.sso
I am confronted with error:
BUILD FAILED
F:\WLSoracle2\user_projects\domains\base_domain\migration\build.XML:48: Lee
pay error has occurred during execution of this line:
F:\WLSoracle2\user_projects\domains\base_domain\migration\build.XML:53: * file
App-cedstore = APPWORKSPACEDIR/SRC/META-INF/cwallet. SSO does not exist!
Here I don't know that the APPWORKSPACEDIR is referring to that.
Here, I use the file build.xml and jps - config.xml as shown in the link above.
Please if any one face the same error during deployment, please tell me the solution.how can I remove this error.
SanchezSanchez,
APPWORKSPACEDIR is the directory of your *.jws file is located in, so it the main folder of the application.
Timo
-
I'm a newbie using studio JDeveloper, need to use it to complete my final year proj. So please help.
I do the tutorial of the ADF and I encountered this error:
BUILD FAILED
C:\Infrastructure\Ant\build.XML:52: The following error occurred during the execution of this line:
C:\Infrastructure\DBSchema\build.XML:91: The following error occurred during the execution of this line:
C:\Infrastructure\DBSchema\build.XML:56: The following error occurred during the execution of this line:
C:\Infrastructure\DBSchema\build.XML:28: C:\Infrastructure\Ant\wlserver_10.3\server\lib not found.
I tried to use the backslash for my coding, but still had this error.
Will you please tell me how to resolve this error, so I can continue with the tutorial.Hello
It seems that your port is 1521 and 1522 as you said
so if your sid is ORCL try to modify your listener.ora:SID_LIST_LISTENER= (SID_LIST= (SID_DESC= (SID_NAME=PLSExtProc) (ORACLE_HOME=C:\app\L308C11\product\11.1.0\db_1) (PROGRAM=extproc) ) (SID_DESC= (SID_NAME=ORCL) (ORACLE_HOME=C:\app\L308C11\product\11.1.0\db_1) ) ) LISTENER = (DESCRIPTION_LIST = (DESCRIPTION = (ADDRESS = (PROTOCOL = TCP)(HOST = L30911.sitfypj.nyp.edu.sg.sitfypj.nyp.edu.sg)(PORT = 1521)) (ADDRESS = (PROTOCOL = IPC)(KEY = EXTPROC1521)) ) )
then restart the listener (as windows service), if this help not do also HOST = localhost
-
BUILD FAILED java.lang.ExceptionInInitializerError in Jdeveloper
When I try to deploy a process BPEL of JDeveloper 10.1.3.2.0 by right-clicking on ProjectName and selecting deploy, I get the following error.
BuildFile: D:\OracleJDeveloper\jdev\mywork\Application_DGA_Second\DGA_HelloAppendProcess\build.xml
validateTask:
[echo]
--------------------------------------------------------------
| Validation workflow
--------------------------------------------------------------
[validateTask] Validation of the workflow task definitions is completed without errors
deployProcess:
[echo]
--------------------------------------------------------------
| Deployment process bpel DGA_HelloAppendProcess on punib.mycompany.com, port 7777
--------------------------------------------------------------
[deployProcess] Deployment of process D:\OracleJDeveloper\jdev\mywork\Application_DGA_Second\DGA_HelloAppendProcess\output\bpel_DGA_HelloAppendProcess_1.0.jar
BUILD FAILED
java.lang.ExceptionInInitializerError
Total time: 6 seconds
When I followed the same procedure from another system, it works fine.
I'm stuck here, please help solve this problem.Hi Dhiraj,
Just delete the JDev folder you have on this machine, unzip cool and try again.
-
ThinApp Capture fails with file system tool virtual "Build Fail" has stopped working
Hi people,
Anyone know the cause of what I have this on many applications try to build the project.Win7 x 86 package clean. Thought it might be the file names long so I did Capture a local folder on the root of C: Notthing fancy here capture the basic machine...
Any help, I would be happy I'm getting thin work me on it for a dau or...
At soon Norm
... just remove *.debug files in the... Directory of Gimp\lib\gimp\2.0\python\ and the construction!
-
Office 2010 Professional build fail
I'm trying to build Office 2010 Pro and I'm having a few problems. Still, the build will fail to about 80%. I'm using VMware Thinapp Version 4.6.0 - 287958 on a clean Vista VM.
I have attached the log message.
Anyone have any ideas on how to solve this problem?
Here is a step by step of the instructions on the packaging of Office 2010:
In addition, please see this article:
-
ThinApp in SDLC build / release
Anyone know if it is possible to integrate thinapp with a TFS / build / release process.
i.e. it has interfaces command line that will be deprived from an external source.
I would like to automate the version of a virtual package in any set of tools so far of app - v / svs etc have failed, but I hear rumors thinapp can be controlled from a command line.
can someone point me in the direction of the api / command line sdk for thinapp.
Cheers,
John
We recently announced a new product called 'ThinApp Factory' that would probably be good your usecase.
Contact your local VMware systems engineer for more information about this.
Linjo
Maybe you are looking for
-
Problem of Apps - Pages, Numbers - free
Hello I have a problem with my new iPhone 16 GB iOS 9.3.4 5s. A few days ago, I bought him (new store form). Today, I found this topic on free applications - Pages, Numbers etc (download bezpłatnie aplikacje na Apple iPhone, iPad, or iPod touch - Wsp
-
error on execution of fpclose.vi when you use FP-1000 and two FP-TC-120 module
I have an error that occur in my LabVIEW program by closing connections Point field. I use LV8.5 and im to connect to a FP-1000 (native RS-232 port) controller that connects to two modules FP-TC-120, under XP. The error I get is "error 33589' caused
-
I use a WaveformChart to display multiple traces of data, the number of traces is variable, I use nodes property to set the number of traces that the digital display is visible or not, as there are more data increases the number of tracks and digital
-
Automatic detection of DAQmx devices
Is there an easy way to detect the present NI DAQ devices by programming in LabVIEW? I want my VI to reconfigure its DAQ installation based on what the material is present. Kind regards Ken
-
Hello. I use Windows XP service pack 3 When I reformatted the computer earlier (before I updated my service packs and all), I could go in my windows Explorer, I could see all my photos by file name, updated and the date of creation (both increasing