Office 2010 Professional build fail

Similar Questions

• Office 2010 Professional

  Office 2010 Professional is compatible with XP Pro?

  Office 2010 Professional is compatible with XP Pro?

  http://Office.Microsoft.com/en-us/products/Microsoft-Office-2010-system-requirements-HA101810407.aspx

  Office Home and Business 2010

  Component	Requirement
  Computer and processor	500 MHz or faster processor
  Memory	256 MB OF RAM; 512 MB recommended for graphics features, research instant Outlook, and some advanced features. 1
  Hard drive	3.0 GB available disk space
  Display	monitor resolution 1024 x 576 or higher
  Operating system	Windows XP (must have SP3) (32-bit), Windows 7, Windows Vista with Service Pack (SP) 1, Windows Server 2003 R2 with MSXML 6.0 (Office 32-bit only), Windows Server 2008, or later 32 - or 64 - bit OS. Microsoft Office forums http://social.answers.Microsoft.com/forums/en-us/Group/Office

  Bruce Hagen
  MS - MVP October 1, 2004 ~ September 30, 2010
  Imperial Beach, CA

• The content of my email do not print since I installed Office 2010 Professional yesterday - it's me or what?

  As I installed Office 2010 yesterday, I can't print the contents of my mail.

  Very frustrating and counterproductive to say the least

  Please can someone help?

  What e-mail program?

• I uninstalled Office 2010, this has messed up my computer > failed to send the email and my old Office 2002 none no longer works

  I uninstalled Office 2010, this has messed up my computer > cannot send the email and my old Office 2002 none no longer works

  My Office 2010 Professional Plus activation failed because I exceeded the number of facilities on my computer.  The computer on which the activation failed now on has many damaged programs operational.  Outlook Express 6 does not emails, send him previously installed Office 2002 does not work, and the computer is extremely slow opening of web browsers and download content.  System Restore did not restore anything at all.

  After the activation failed I of course used Add/Remove programs to uninstall Office 2010.  This is when all programs no longer works correctly.

  Hi AJ 400,.

  ·         What happens when you try to send mails?

  ·         You get the error message?

  ·         Who are you referring when you say "when all programs stopped working properly?

  Follow these methods.

  Method 1: Follow the steps in the article.

  http://support.Microsoft.com/kb/813514

  Method 2: Perform a clean boot to see if there is a conflict of software like the clean boot helps eliminate software conflicts.

  Note: After the clean boot for troubleshooting, return the computer to a Normal startupmode.

  You can also post your query related to the Microsoft Office products in:

  http://answers.Microsoft.com/en-us/Office

• Microsoft Office Security updates has failed-0 x 80040154

  Original title: open the file diag.cab in the windows update search - how to?

  Windows update fails repeatedly, despite the withdrawal of 32 bit Vista Home premium and to do a clean reinstall.  Office 2010 Professional Plus was also deleted and performed a clean installation.  Shortly after the new installation, the update process has been very successful.  Now, he returns to the 0 x 80040154 which was the reason for doing all the work.

  Hoping that running Windows Update automated convenience store, that the problem could be better identified and respected.  Note that all updates failed, so far, since the work of reloading - are all the Office updates.  We try to avoid the loading of third-party solutions, because the risk is a concern.

  Gene

  Hi Scott,

  Keep the computer in a clean boot and check the status of the issue. Own avoids the other application conflicts.

  How to perform a clean boot for a problem in Windows Vista, Windows 7 or Windows 8.

  http://support.Microsoft.com/kb/929135

  Note: please go through the section: How to reset the computer to start as usual after a clean boot troubleshooting section of Kb to start the computer to a normal startup after you fix the problem.

  I hope this helps.

• Cannot convert Office 2010 documents with PDF Converter

  I recently installed Office 2010 Professional on my computer from the operating system on Windows XP SP3. Before you install Office 2010, I got the Adobe PDF 6.0 Reader and converter of documents already installed on my computer, with which I could easily convert PDF files to office documents. But after I installed Office Professional 2010 on my computer, I don't see the buttons on the Office Word or Execl or Power Point applications PDF and am not able to convert all PDF documents. Can someone help me please?

  In Word 2010, select file, save as and click the down arrow to the right to register under and select the pdf option in the drop down menuu.

• Can someone help me solve the problem APPCRASH on Windows 7? The problem occurs after installation of Office 2010

  Hi all

  the OS is Windows 7 SP1 32-bit Enterprise Edition.

  I use an important banking software package called ORF more than Misys, the application is critical for the company, the problem occurs after the installation of Microsoft Office 2010 Professional Plus with Service Pack 2; the ORF more crashes when you try to print to a PictBridge compatible printer.

  I get the following message from crash:

  Signature of the problem:
  Problem event name: APPCRASH
  Application name: orfplus.exe
  Application version: 5.0.1.0
  Application timestamp: 3f6f479b
  Fault Module name: StackHash_802d
  Fault Module Version: 6.1.7601.22436
  Timestamp of Module error: 521eaab0
  Exception code: c0000374
  Exception offset: 000c38b7
  OS version: 6.1.7601.2.1.0.256.4
  Locale ID: 2057
  Additional information 1: 802d
  More information 2: 802d0d721d077b7993d17470b8164201
  3 more information: d6a2
  Additional information 4: d6a2e9e6b15ae70428294b9407d7e88d

  Read our privacy statement online:
  http://go.Microsoft.com/fwlink/?LinkId=104288&clcid=0x0409

  If the online privacy statement is not available, please read our offline privacy statement:
  C:\Windows\system32\en-US\erofflps.txt

  ----

  I tried to exclude the orfplus.exe of the DEP, but that does not solve the problem, the application always crashes when I try to print a report.

  ----

  As a result, we are unable to upgrade our office staff of Office 2010 Professional Plus application.

  I appreciate if someone can help me solve this problem.

  Thanks in advance.

  Hello Matt,

  According to the issue description, it seems that you are connected to a network domain, so I suggest you to republish your query on the TechNet forum and I hope that you will receive a response it a better way that they are trained on the computers in the domain and their settings.

  http://social.technet.Microsoft.com/forums/en-us/home?category=w7itpro

  Thank you.

• Service Pack 2 for 32-bit edition of Microsoft Office 2010 (KB2687455) failed with Windows XP

  Service Pack 2 for 32-bit edition of Microsoft Office 2010 (KB2687455) failed with Windows XP.  I applied microsoft AutoCorrect (Mr. Fix) and 4 registry commands in the article of knowledge, but it is always a failure.  Help?

  Service Pack 2 for 32-bit edition of Microsoft Office 2010 (KB2687455) failed with Windows XP.  I applied microsoft AutoCorrect (Mr. Fix) and 4 registry commands in the article of knowledge, but it is always a failure.  Help?

  Any specific error message?

  Download and install SP2 manually: -.

  http://www.Microsoft.com/en-au/Download/details.aspx?ID=39667 (32 bit)

  http://www.Microsoft.com/en-AU/Download/details.aspx?ID=39647 (64-bit)

  If in doubt about whether or not you are running 32-bit or 64-bit, see this topic:

  http://social.msdn.Microsoft.com/forums/Office/en-us/043198a3-e2a0-45b5-85A4-2aa4abb5cc82/how-to-determine-if-user-has-Office-2010-32-bit-vs-64

  If you still have problems, try to update in a clean boot state:

  http://support.Microsoft.com/kb/929135/en-AU (don't forget to return to a normal startup when finished).

  Office updates may fail if the update files, look for the original installation files. Sometimes the complete file download remedies this problem or put the installation media in the installation drive can also help. If still no, you may need to do a repair installation.

• Updated 646 error Code to Microsoft Office 2010 Home and Office Edition using the Version Windows 7 Professional 32 - Bit

  I just bought Microsoft Office 2010 & individuals.  I was prompted to install the following updates 9: definition update for Microsoft Office 2010 (KB98726), Microsoft Office 2010 security update (KB2289078), Microsoft Office 2010 security update (KB2289161), update security for Microsoft Publisher 2010 (KB2409055), update security for Microsoft Word 2010 (KB2345000) updated for Microsoft Office 2010 (KB2202188), update for Microsoft Office 2010 Validation of the file (KB2413186) update for Microsoft OneNote 2010 (KB2433299), update for Outlook Social Connector (KB2289116).  I tried several times to install these updates by using Windows Update without success after the resolution of issues of update could not solve the problem.  Is it possible to install these updates on my computer & to receive future updates without more questions?  Extremely frustrating after spending more than $250 for the software.  Help, please!  Thank you.

  A KB was created for 646 error code that appears during the installation of the updates of Microsoft Office. The KB includes an automatedMicrosoft fix 50461 that corrects the problem. Look at the following KB:http://support.microsoft.com/kb/2258121>

• "Cannot display page" error message when you try to download 2010 professional

  Original title:

  Error message on Internet download from trusted sites?

  I am trying to download 2010 Professional on my computer.  Yes, I have a product key.  Whenever I try to download, I get an error message "cannot display the page.  This often happens to me.  Any suggestions?

  Hello

  Thank you for giving us the opportunity to help you with your concern for Windows!

  I see from the description of your post, that you are unable to download Microsoft Office Professional 2010.

  If you get the error message in Internet Explorer , then this might be the cause:

  For performance reasons, where Internet Explorer cannot establish a connection to a proxy server, the proxy server is added to a list of proxy servers bad so that it is not reused for a period of time. This period is 30 minutes by default. If a proxy auto-configuration script returns a PROXY list that specifies several proxy servers, a connection to the proxy in the list will be attempted. If the connection fails, the process is repeated until a connection is established, or the list is exhausted. If the list is exhausted and no connection is established, the user will receive a "Cannot display Page" error message in Internet Explorer.

  We would like to get more information about you to help solve your problem. You better, please answer the following questions.

  1. What is the full error message?

  2 are you able to download other files without any problem?

  3. what web browser do you use to download?

  4. what version of Windows are you using? What service pack is installed on the computer?

  5. based on what site are you trying to download?

  You can check the following link to learn more about the error message "cannot display the Page":

  "Internet Explorer cannot display the webpage" error in Internet Explorer

  http://support.Microsoft.com/kb/956196

  Warning: Antivirus software can help protect your computer against viruses and other security threats. In most cases, you should not disable your antivirus software. If you do not disable temporarily to install other software, you must reactivate as soon as you are finished. If you are connected to the Internet or a network during the time that your antivirus software is disabled, your computer is vulnerable to attacks.

  Warning: him reset Internet Explorer settings feature might reset security settings or privacy settings that you have added to the list of Trusted Sites. Reset the Internet Explorer settings can also reset parental control settings. We recommend that you note these sites before using thfeature reset the settings of Internet Explorer e.

  Note:

  If the question is limited to Microsoft Office Professional 2010 then please post your question here for assistance:

  http://answers.Microsoft.com/en-us/Office

  Hope the information is useful.

  If you need help on this issue or any problem related to Windows, please keep us informed. We will be happy to help you!

• Delay of Subscriber notification followed Winlogon 0x800705b4 after installing MS Office 2010

  My PC Windows 7 Professional x 64 now takes a long time to start. I see a screen "Configuring Updates" which remains at 0%, followed by "failed to configure.

  The logs show a second delay 300 as follows:

  -L' subscribed to winlogon notifications took 300 second (s) to handle the notification event (CreateSession).

  So my updates pending show as follows:

  -Installation failure: Windows failed to install the following update with error 0x800705b4: update to the list of compatibility view Internet Explorer 8 for Windows 7 for x 64-based systems (KB2447568).

  Even for updates KB2284742, KB2388210, andKB2249857

  This started happening when I installed Microsoft Office 2010 (download HUP).

  Suggestions?

  Error_Timeout 0x800705B4

  From: you can encounter errors related to the connection of temporary when you use Windows Update or Microsoft Update to install updates

  First see if there is a proxy server used by the security software installed by following the steps for Windows 7 Sub
  Method tip B: remove the entry from the WinHTTP proxy configuration proxy server.

  Netsh winhttp show proxy from a command prompt displays Direct access , type exit and then press enter at the command prompt to close.
  Otherwise type netsh winhttp reset proxy , and then press ENTER to remove the proxy, then type exit, press ENTER to close the command prompt.

  If a proxy server is not the question...

  We use a 3rd party firewall? If the answer is Yes, then suggest you set up boot system, restart the system and make sure that the native firewall of Windows 7 is now on by opening the Windows Firewall in Control Panel (click on the view by: link and set it to small icons to be able to access the Windows Firewall), then see if the updates install now.
  How to troubleshoot a problem by performing a clean boot in Windows Vista or in Windows 7

  If the updates install or not, Cancel now clean boot configuration and restart the system once more.

  If updates are always not to install please copy & paste the last lines of 50 or more WindowsUpdate.log in your response.
  How to read the Windowsupdate.log file

  Expert MowGreen Windows IT Pro - consumer safety

• ThinApp mailing - Activation Office 2010 issue

  Hi all

  I'm new to this community, so forgive me if I did not follow the normal protocol with this discussion.

  Basically I have Thinapped a piece of software called Civica App. The software itself works well until I try to use the mail merge with MS Word 2010. Our Office 2010 Pro, use KMS activation and is installed in the base image. The suite Office 2010 products see the activated when launch you them manually in the VDI environment, so I know KMS works well.

  When we run the mailing of the Civica App Thinapp he launches Word 2010, merges the data into the Word template, and then launches the Office 2010 Installer. The installation program will fail and then we get the infamous "Microsoft Office is unable to verify the license for this application. A repair attempt failed or was canceled by the user. Message will now close the Application.

  Isolation mode is only passed in full to the merged on the folder %appdata%\microsoft\windows\sendto folder/sup and allowed the software write in the itinerant/persona user profile when creating new merger model files and mail (because it is where the software Civica App writes this file). MS Word 2010 features installed for the mailing and they work fine.

  I applied 2 fixes in VMWare KB1022287. I realize account this article talks of when Office 2010 Thinapped himself, but the symptoms are the same. I placed this code in the file config.xml and re-installed Office 2010 in the base image, no luck there:

  "< setting Value ="kmsserver.domain.com"/ >"
  < value = "1" / >

  I also copied and pasted the "Office2010-Osppsvc - Keys.txt" registry entries at the top of the file HKEY_LOCAL_MACHINE.txt of the Civic App files project and re - build the application.

  There was a suggestion to put the software to the base image, but I have another application with the same problem. This software is by computer based on licensing, so that it can not all put in the base image.

  Note: If I run the App Thinapp Civica on a physical Windows 7/Office 2010 Pro Plus machine, it works fine.

  I am out of ideas now, just so you seek advice if anyone else has experienced this?

  Thanks - Steve.

  OK, if you use civic App ThinApp package with natively installed Office 2010, and on some machines, you get a license error. By default, civic App Launches native binaries of Office in the virtual environment. You can modify package.ini to run Winword in the native environment, and I hope that the license error can be avoided. For example:

  VirtualizeExternalOutOfProcessCOM = 0
  ChildProcessEnvironmentExceptions = Winword.exe
  ChildProcessEnvironmentDefault = virtual

  Here's an example of doing something similar:

  http://blogs.VMware.com/ThinApp/2011/12/enabling-send-as-email-attachment-in-ThinApp-packages-when-Outlook-is-installed-natively.html

• Laptop HP G62-451SA: cannot read the label for Office 2010 product key as it dissipated over time

  Obliged to restore settings after a total crash.

  Spent the whole day as recommended by HP, including using my recovery disk that has failed.

  Tried to open Microsoft Office 2010 as usual, but said to give the product key to activate it.  Mine is on a sticker on the bottom of my laptop.  Unfortunately it is place to be where it is that some of the numbers have disappeared over time.  Now I can read only the last 15 digits.

  Ages worn on Microsoft support pages and basically they said that the onus to solve this problem since I legally paid for it when buying their product to HP.

  I'll lose more than a year of work, if I can't get this sort.

  Thank you.

  The label on the bottom of your laptop is not for the office. It's your Windows license key. It should say Windows 7 Home Premium above the numbers.

  Most of the HP machines come with a trial of office unless order you it with more full Office and pay extra. The trial usually actually works after the period 60 day trial - unless you do a recovery. After a recovery it will require you to buy a license key to use.

• -Error code 646 - repeated the failures (now for the last two months) to install updates Windows 7 S/W, possibly after installation of Office 2010?

  For the last two months - easrly November, when stopped down, I saw 10 message updates are being installed. This follow-up installation of Office 2010 (download from Web site), who bought Office 2007 earlier this year, and by choosing to take the free update promised for 2010.

  On the control, I find that whenever all ten updates failed to install (error code 646)

  Concered updates are KB2202188; KB982726; KB2289161; KB2289078; KB2413186;  for Office 2010

  and KB2345000 - Word 20120.

  KB2409055 - 2010 Editor;

  KB2289116 - Social connector;

  KB2431831 - knitting 9;

  KB2433299 A Note;

  Any thoughts there?

  Steve L

  A KB was created for 646 error code that appears during the installation of the updates of Microsoft Office. The KB includes an automatedMicrosoft fix 50461 that corrects the problem. Look at the following KB:http://support.microsoft.com/kb/2258121http://snipurl.com/164ypp>

  Suggest you download and save the fix it.

  Then close all open programs and browsers before running MSFix it 50461.msi.

• Cannot verify the license for Office 2010

  My Dell desktop computer bought 08/15/2005 (order # 435890399) with Microsoft Windows XP Professional installed.  My software was purchased legally, and until today, all desktop software worked fine.  Today, when I tried to open Word 2010 and access a message appears on the screen "cannot check product license.

  It is said to correct this, in Control Panel, but I don't know how to do this.  Please notify.

  WEG

  Office 2010 was not available in 2005, you can have Office 2003.

  Microsoft Office Activation number:
  http://support.Microsoft.com/kb/950929

  Activate the 2007 Microsoft Office programs
  http://Office.Microsoft.com/en-us/SharePoint-Designer-help/activate-Microsoft-Office-programs-HA001233434.aspx
  (See telephone activation)

  Activate Microsoft Office 2010 products
  http://Office.Microsoft.com/en-us/SharePoint-workspace-help/activate-Microsoft-Office-programs-HA010354227.aspx

  Older version of Office: Activation and registration of a Microsoft product
  http://support.Microsoft.com/?kbid=326851

  J W Stuart: http://www.pagestart.com