ThinApped application refuses to load normally but works Ok with the Dependency Walker tool

Hi all

Hope someone can provide some advice because I'm Thinapp application to a customer and I'm running into a weird problem. The app is an application of type dictionary to translate from English to Polish n vice versa. The app works well after the normal installation. However after taking the instant message n build, the resulting package refuses to start. When I opened the package with the Dependency Walker tool I see that there is a missing DLL "" MFC42LOC. "." DLL', when I profile then the app it starts fine... I can't understand why this doesn't work under Thinapp, any help is appreciated...

Thank you

P.S. I have attached track of dependency walker...

Try to including MFC42.dll in the package (copy it to % % SystemSystem and rebuild the package).

Tags: VMware

Similar Questions

  • The speaker volume in the computer sound control mixer is up and works well with the speakers, but with headphones, I can hardly hear.

    Original title: the headphone volume

    How can I activate the volume for headphones? the speaker volume in the computer sound control mixer is up and works well with the speakers, but with the headdphones that I can barely hear

    Hello
     
    1. who is the operating system installed on the computer?
    2. What is the brand and model of headphones?
    3A this works much earlier?
    4. What is the brand and model of the sound card?
    5. have you ever tried to play the Audio using different media player applications and check?
    6. have you tried to connect the headset to another computer or phone and check if it works well?
     
    I suggest you follow these methods and check.
    Method 1: Run the audio troubleshooter.
     
    Method 2: Set the earpiece/microphone as default device and check.
     
    a. right click on the volume icon in the system tray at the right corner on the desktop.
    b. Select the playback device, go to torecording tab.
    c. make a right click and headphone/microphone as the default device.
    d. click on apply and ok.
     
    If above steps fails, proceed to method 3.
     
    Method 3: I suggest to disable the improvements and check.
     
    a. right-click on the icon "speaker" at the bottom right of the screen.
    b. Select "playback devices".
    c. right-click on the helmet.
    d. Select Properties
    e. click improvements
    f. check Disable all improvements
    g. click OK
     
    You can read this article for more information:
     
    Tips for solving common audio problems

    You can also contact the manufacturer of headphones and check.
     
    I hope this helps!

  • Install OSX 10.11.4 I do cleaning but R command will not work. With the help of USB keyboard so not wifi issues to to worry. Help?

    Install OSX 10.11.4 I do cleaning but R command will not work. With the help of USB keyboard so not wifi issues to to worry. Help?

    Would you like to share why you must do a clean install?

    You can try the recovery of the internet (which will work if your older model has been updated to enable of): hold command + Option + R until you see a progress bar (take a while). It will connect you to the Apple servers. When you see the utility window, choose disk utility to erase your disk and when you're done, choose to reinstall OS X.

    Computers that can be upgraded to use OS X Internet Recovery - Apple Support

    PS: Correction: I think not yours can be updated; in this case, you will need the original installation disks to wipe the drive and reinstall.

  • Current applications will work ok with the iPad Pro?

    I use a number of applications for the conduct of instruction - which are designed to move objects... will be they work well with the new iPad Pro... ?

    They should be. Other that a processor more the biggest difference between an older iPad and the pro is screen size.  and I imagine the apps dimensionnera upward for the pro.

  • I bought Halo 2 for Vista, but who like OS Windows XP Pro, just can't launch the startup.exe, I search the community, there is a rumor that it won't work even with the patch. Can someone help, please?

    I bought Halo 2 for Vista, but who like OS Windows XP Pro, just can't launch the startup.exe, I search the community, there is a rumor that it won't work even with the patch. Can someone help, please?

    Unfortunately, Halo 2 does support Windows Vista and more.  Windows XP is not supported.  There may be 3 party hacks that can make it work, but they are not taken in charge and potentially dangerous.

    Paul Smith - MVP for Windows desktop experience... I crawled off NNTP - for now. Detachment Aldershot, United Kingdom. On the internet at windowsresource.net and dasmirnov.net. Please post back to let us know what works and what does not. :-)

  • I just got a new modem (Arris SB6190) and now my Airport Extreme does not connect.  It worked fine with the previous modem (a rented one TWC).  Help!

    I just got a new modem (Arris SB6190) and now my Airport Extreme does not connect.  It worked fine with the previous modem (a rented one TWC).  Help!

    Always recommended to reset the airport back to settings by default and then set up again whenever you have a new modem or change your Internet Service provider.

    Turn off the new modem for at least 30 minutes. More is better.

    Perform a hard reset on the AirPort Extreme, then it turned off.

    Make sure that the Ethernet cable connects the modem to the "O" on the AirPort Extreme WAN port

    After the power of the modem 30 minutes down, turn on the modem and let it run for at least 5 minutes by itself.

    Then, turn on the airport and let it run a few minutes

    Set up AirPort Extreme again

    Important note... There are many reports of problems with the modem Arris SB and airports. Both are great products, but they do seem to work perfectly together for some users.

  • What apps work best with the pencil

    What apps work best with the pencil. Particularly interested in commenting, highlighting and rating photos and graphics.

    I like 'Fame' for handwritten notes. "Annotable" is good for the annotation of pictures and graphics. Recently, I started using "Ultimate NoteLedge" and learn what it does yet. But so far, I like it, too. And then, everything that made Adobe.

  • Until the latest update when the AutoComplete bar has been selected, he "went" no other by clicking. I must now click the refresh arrow. It won't work even with the return. How can I operate the old way easier?

    Until the latest update when the url I wanted in the address bar of AutoComplete has been selected, it "accompanies" no more further by clicking on. I must now click the refresh arrow. It won't work even with the return. How can I operate the old way easier?

    You can disable this extension in tools > Modules > Extensions and close and restart Firefox normally.

  • KB955759 does not appear when I check the updates manually, but it appears with the yellow shield after you have enabled the automatic updates.

    original title: Windows Update acts confused - kb955759 does not appear when I check the updates manually, but it appears with the yellow shield after you have enabled the automatic updates.

    I just reset my CMOS settings, writing zeros for my hard drive, repartitioned, reformatted and used the recovery cd Gateway system to get my computer to Windows 98se - factory settings, except at the beginning of the recovery of the system, when it says "press any key for advanced options," I pressed a key and then I unchecked all the default (3rd party) applications including Norton and left only 2 checked: "Updated USB Hub" and "Windows Shutdown Supplement," while nothing has been installed, leaving only win98.
     
    Then I used my disc XP Home (SP2) update.  I, immediately after the upgrade to Windows XP, installed "Office XP with Frontpage, Developer Edition", then Norton 2012 before never connect to the internet.
    Then, I connected to the internet and continuously update of Norton, before ever hitting the Windows Update page. The first thing I did then was to activate Windows, and then activate the office.
    Then I hit the update of Windows "button" that says "get all your updates in one place... upgraded"Microsoft Update".  I, then, just kept hitting the page update and restart, until I find the SP3.  Then, I took a break, until the next day.
     
    I have an ADSL broadband, with a Linksys EtherFast PCI card.
     
    Then I got SP3, which installed without any problems.
    So I just kept "microsoft continuous update" manually (and reboot), until there is no more updates - EXCEPT, I always uncheck Windows Malicious Software Removal Tool - which was the only screening at the final stop for the night.  I think that I ticked the box "don't ask me about this update".
     
    Then, in the morning, after you have enabled automatic updates, I noticed the yellow shield - Windows security icon (or whatever it's called), so I clicked on it and checked it was tellimg me was available [when I checked "Custom Install (advanced users)"].  What showed was 1 update - 955759 KB.
     
    After the problem, already at the reformat (months and months), see the yellow shield telling me there are updates available, which were already installed (before rebooting), I checked manually on the internet with IE 8, pressing alt, "T", "U".  There is no updated list.  Then I checked through my history of update (twice), and KB955759 had not been installed.
     
    My update setting is to let windows download ('important') updates, but let me choose when to install them.
     
     
     
    What is the right - Windows Update (NO update important reporting) Site, or the yellow shield (reports [a] kb955759 [update])?
     
    I can not yet confirm he is supposed to be an update for XP home kb955759, because I was unable to locate any detailed documentation on this 'thing' that protect the yellow safety seems to think is a significant update.

    Comment 1: To my rquest, a moderator merged your thread in the Sub-forum Win7 updates with your wire in the Sub-forum of updates of Windows XP 20 Feb-12, c. 07:50 UTC.

    Comment 2: If you will not contact the MS Support on this issue?

    ~~~~~~~~~~~~~~~~~~~~~~~~~~

    Just for the heck of it, I have disabled the automatic updates, cleared my browser cache, checked manually, updates from microsoft (windows) and found none (with the exception of software malware removal tool windows [which I have not installed]).  Then, I turned the automatic updates on, and without even being connected to the internet, the yellow shield popped up with the kb955759 "update"...

    Repost...

    1. If you open Internet Explore (only!) to http://windowsupdate.microsoft.com and run a CUSTOM scan, KB955759 appears in results?... If so, you manage to install it and/or security updates available?

    2 after no. 1 above [<>], is the 'yellow shield' icon appears in the Notification area (on the left of your clock)?  .. and if yes, by clicking on the 'yellow shield' icon tells you that KB955759 or any other updates is ready-to-be-installed?  .. .and if so, you manage to install it?

    3 after doing 1 # & #2 above [<>], is KB955759 or any other updates offered as a ready-to-install update when you go off your computer?  .. .and if so, you manage to install it?

    ... I guess that clearing the browser cache does not erase 'downloaded' updates.

    Nope. If you want to clear the queue of the update...

    OPTION A:

    1. stop the automatic updates service:

    Start > run > (type or copy/paste) services.msc > click OK
    Double-click automatic updates > click stop
    (Stopping the service will take a moment)

    2 remove the contents of the download folder:

    Start > run > (type or copy/paste) %windir%\SoftwareDistribution > click OK

    Open the download folder and delete its content
    Close the window.

    3. start the automatic updates service:

    Start > run > (type or copy/paste) services.msc > click OK
    Double-click automatic updates > click Start
    (Starting the service will take a moment)

    OPTION B:

    1. open Internet Explorer (only!) to http://support.microsoft.com/kb/910336 [don't know the titles, etc..]

    2. make disappear/close the Troubleshooter automatically pop up.

    3 repaired 50202 in DEFAULT modes and AGGRESSIVE. [1]

    4 reboot.

    Does anyone know how to determine if software mailicious removal tool is installed on XP? [source ]

    Check the located log file...

    C:\Windows\Debug\ MRT. NEWSPAPER <>

    Related...

    ... This leaves us with the malicious software removal tool don't appear not.

    I guess I'll have to leave "auto-update" (I often have less than 65 M of free memory left and do not have enough memory to msrt) and don't assume no other current error. [source; 17 Aug-11]

    It's no wonder that you ended up having to do a clean install of Win98SE & then upgrade to Windows XP again!

    ================================================================
    [1] full Disclosure: the difficulty operating in AGGRESSIVE mode will remove your update history but not updates installed in Add/Remove Programs list.

  • BlackBerry Z10 PrintToGo works only with the new version of OS 10

    Am unable to load files using PrintToGo from the new version (10.1.0.4181) installed.

    Worked fine with the previous version and works with the Playbook (2.1.0.1526)

    PrintToGo error log:

    PrintToGoDesktop.exe Information: 0: 09/02/2013 11:33:52 - TCPClient.BeginConnect (using ServerIP:192.168.2.102, ServerPort:80)
    PrintToGoDesktop.exe Information: 0: 09/02/2013 11:33:52 - TCPClient.EndConnect)
    PrintToGoDesktop.exe Information: 0: 09/02/2013 11:33:52 - connected successfully!
    PrintToGoDesktop.exe error: 0: 09/02/2013 11:33:52 - Z10 (2ABE5757) cell phone: EXCEPTION RAISING - System.NullReferenceException: object reference not set to an instance of an object.
    on the EDGE. PrintToGo.UserInterface.Device.UploadPDFFile (String fileTransferURL, String fileName, BackgroundWorker bw, DoWorkEventArgs e)
    PrintToGoDesktop.exe Information: 0: temporary removal PostScript file 'C:\Users\Paul\AppData\Local\Temp\PtB1360.tmp '.

    Resolved, had to repair the Z10 with the PC!  Would have thought that upgrading software would have saved the environment so that this step was not necessary (played with this for several weeks and market).

  • my hp presario says 'boot mrg is missing' and only load windows 7 can correct with the recovery disk

    my hp presario says 'boot mrg is missing' and only load windows 7 can correct with the recovery disk

    Hello

    Here is the vista forums

    Try the repost in Forum windows 7 the link below

    http://answers.Microsoft.com/en-us/Windows/default.aspx#tab=2

    Answers by topic

  • a hard time to load pictures on my computer with the usb hoked in to the computer and the camera, repeat me invalid file

    I wanted to download photos off my digital camera. I put in the usb cord and the adapter to the camera, the screen appears where it says import pictures. I click on it, then it says on the lower right of my screen as invalid data or no file found. I really don't want to lose my pictures.

    Depending on the brand / model of camera, you may need to install the correct drivers for Windows 7.  You need to consult the websites of the camera tech support and find the info on connecting your camera to Windows 7.

    If the camera is not compatible with Windows 7, you could never get import it pictures to work properly, with the camera.   If this unit has a removable 'digital camera' media card, you could buy / install a multimedia card reader Windows 7 compatible digital 'camera '.  According to the camera (aka turning the camera off) remove the digital media card and then insert it into the slot in the media card reader for.

  • My students use the filling and the signature on a package of .pdf tool I'm going to fill them, but when they record and open the next day their text boxes, that they created with the bucket fill tool and sign all went and many are overlapping.

    My students use the filling and the signature on a package of .pdf tool I'm going to fill them, but when they record and open the next day their text boxes, that they created with the bucket fill tool and sign all went and many are overlapping.

    Hi chbradshaw,

    Instead of filling & signature, tool, use the text comment comment tool, KB doc option. using comments in the PDF, Adobe Acrobat DC files (keyword: Add a text comment).

    Kind regards

    Nicos

  • my up to date iMac can't read installing lightroom 5 dvd I received for Christmas, the dvd player works fine with the other dvd, is it possible to download the program with the serial number of the dvd?

    my up to date iMac can't read installing lightroom 5 dvd I received for Christmas, the dvd player works fine with the other dvd, is it possible to download the program with the serial number of the dvd?

    No need to worry about the disk version. He would just install an update anyway once it has been installed. Download from the link provided below and use the serial number, you need to activate.

    Updates

  • Application failed (MFC) in the release through the optimization of the compiler, but works well in the debug version

    I am facing problem with the Release version. Application works fine in the Debug version, but in the Release version a pointer initialized to contain the object of another class becomes allocation to different addresses, causing corruption to its values.

    My main application class is K32App
code in K32App.h file
CSheetPrintManager* m_pSheetPrintManager;
CSheetPrintManager* GetSheetPrintManager() { return m_pSheetPrintManager; }

In file K32App.cpp
K32App::K32App()
{
  m_pSheetPrintManager= NULL;
}
BOOL K32App::InitInstance()
{
  if(!m_pSheetPrintManager)
    m_pSheetPrintManager= new CSheetPrintManager();
}
K32App::~K32App()
{
  if(m_pSheetPrintManager)
    delete(m_pSheetPrintManager)
}

 In my file  CSheetPrintManager.cpp
 void CSheetPrintManager::CSheetPrintManager()
 {
   //Initialized all member variables to default values.
   Init();

 }
 void CSheetPrintManager::Init()
 {
   m_nSheetType = SheetIllegalNone;  //long
   m_sBankEntry.Empty();         //CString
   m_bHistorical = FALSE;        //BOOL
   m_bDebitDetailsSet = FALSE;  //BOOL
   m_mapRequested.RemoveAll(); // Type CMap
 }

    During the startup of the application, when it reaches

      if(!m_pSheetPrintManager)
    CSheetPrintManager= new CSheetPrintManager();

    and trying to create a m_pSheetPrintManager object, a 'this' inside the CSheetPrintManager.cpp pointer shows a valid address (0x03768ce0) at the stop just to brace {, once I more in CSheetPrintManager.Init (), not 'this' gets different location and starting point to a different address (0 x 0000000) and then passing more its starting pointing to an another rental (0x03786ce0)} ", then arriving to m_mapRequested.RemoveAll(); 'this' points to some other location. back to main application C32App.cpp file I get next to 'm_pSheetPrintManager' error CXX0030 ' expression cannot be evaluated" in the window of the car. and application continues to run. See what get when move mouse m_pSheetPrintManager (can't post the image because need 10 reputation for him :) so antisocial)Auto window studio screenshot 

    In debug mode, I get m_pSheetPrintManager pointing to the same location during all the processing of the application and members are always correctly initialized.

    But in Release mode, m_pSheetPrintManager continues to point to the different location (address in the window of Auto value). and all the class member variables CSheetPrintManager garbage (Uninitialized) values with each line of treatment within the CSheetPrintManager class.

    If I disable the optimization of the c++ in Release Mode then it works very well without any problems.

    Any help/advice/suggestion is the most popular. Thanks in advance.

    PS: This is my first question here so please excuse if you lack something to point or express properly.

    This issue is beyond the scope of this site (for consumers) and to be sure, you get the best (and fastest) reply, we have to ask either on Technet (for IT Pro) or MSDN (for developers)
    *

Maybe you are looking for