Think that the point that is real protection uss microsoft logo? I can't open the system restore

Similar Questions

• My iPod touch will not connect to WiFi and I followed the steps posted. Also, when he dies he thinks that it is December 31, 1969. What can I do to fix this?

  My iPod touch will not connect to WiFi and I followed the steps posted. Also, when he dies he thinks that it is December 31, 1969. What can I do to fix this?

  Not knowing what the 'followed the steps posted' have been

  The iOS device connects to other networks? If Yes, which tends to indicate a problem with your network.

  The iOS device sees the network?

  Error messages?

  Other devices connect now?

  The iOS device has connected before?

  Try the following to rule out a software problem:

  -Reset the device iOS. Nothing will be lost

  Device iOS Reset: Hold down the On / Off button and the Home button at the same time for to

  ten seconds, until the Apple logo appears.

  -Power off, then back on your router

  . - Reset network settings: settings > general > reset > reset network settings

  - iOS: troubleshooting connections and Wi - Fi networks

  If your iPhone, iPad or iPod touch connects to a Wi - Fi network

  - iOS: recommended for WiFi routers and access points

  -Restore from backup. See:

  iOS: how to save

  -Restore factory settings/new iOS device.

  If still problem and it does not connect to any networks make an appointment at an Apple store Genius Bar because it appears that you have a hardware problem.

  Shop Apple Store - Genius Bar

• I need to restore my windows xp system, but when I run the system restore program, I get the message that no changes were made and to choose another restore point, but all have the same results. Why?

  the system restore program is activated.

  A restore point is selected. program is activated.

  It runs and after system restart, it is said that no changes have been made, run another restore point.

  Same results every time!

  Help!

  Hi larryburrage,

  1. did you of recent changes on the computer?

  2 when was the last time it was working fine?

  3 do you have Norton installed on the computer security software?

  If you use Norton Security software on the computer then refer to the article below and check if it helps.

  http://Service1.Symantec.com/support/sharedtech.nsf/pfdocs/2005113009323013

  If you don't use security software Norton then temporary deactivation of security software installed on the computer and check if it helps.

  Important: Antivirus software can help protect your computer against viruses and other security threats. In most cases, you should not disable your antivirus software. If you do not disable temporarily to install other software, you must reactivate as soon as you are finished. If you are connected to the Internet or a network during the time that your antivirus software is disabled, your computer is vulnerable to attacks.

• I want to do a "System Restore" at an earlier date than when I did a "System Restore Point"; How can I realize this "System Restore" to a date that is earlier than the "System Restore Point"?

  I am running a version of Microsoft "Vista." I want to do a "System Restore" to a date earlier than the 'Restore Point System' which is steeped in external memory of my terminal (and apparently in memory of boarding school of the terminal).  The terminal shows only the "System Restore Point" that I had introduced manually; How replace this erroneous 'system Resote Date Point' so that I can get rid of things that I wish were not included in the drive of my terminal?  Specifically, the "Ready Boost" option has ruined my terminal memory drive; That's why I want to get rid of with a "restoration of memory", but there is no other precedents "System Restore" options.

  Hello

  You will be able to perform a system restore to a restore point created or present on the system. If you have no restore point created before the questions, then you will not be able to restore it.

  For more information, see the following articles:

  System restore

  System Restore: frequently asked questions

  If you try to uninstall an application, you can read the following article to uninstall the program.

  You can see the following link to uninstall the screensaver.

  Uninstall a program

  You can also try disabling readyboost and check if it helps.

  Turn ReadyBoost on or off for a storage device

• You want to connect to Xbox Live 360 using labtop. Cannot use WMI. Windows says THAT WMI is damaged, use the system restore. System Restore will not restore to any point I use.

  I tried to connect to Xbox Live on my Xbox 360 to internet using Wi - Fi to my labtop. I want to enable sharing on this topic in the Advanced tab, but I get the message that says WMI is damaged and I need to use the system restore. However, the system restore will not restore the system at any time I choose. What is the solution?

  OK you have an ETHERNET cable? (cable for PC to the Modem)
  What OS do you have?

  Heres to help, you need to an ethernet cable, or adapter wireless XBOX 360.

  With the ethernet cable, connect one end on the XBOX and one end to your laptop.
  You go to control panel > network and Internet > network and sharing Center > change the adapter settings. Then you select your wireless network and your local network. Then you right click and press 'CONNECTION of BRIDGE' (requires administrator privileges). After that your DONE! Just check if it works on your XBOX 360!

• I gave a friend my password and I think that he abuses my downloads are slow, how can I stop this

  disconect ps3 of blank media

  I gave a friend my password and I think that he abuses my downloads are slow, how can I stop this

  Hello

  ·        What operating system is installed on the computer?

  ·        What browser do you use to download?

  Method 1: If you use Internet Explorer, then you can try the steps from the link below and check if it helps:

  Internet Explorer is slow? 5 things to try

  http://Windows.Microsoft.com/en-us/Windows/help/Internet-Explorer/slow-five-tips-to-boost-performance

  Method 2: I would say as you reset the password and check to see if it helps:

  What is WPA security network key/password for my wireless router?

  http://help.virginmedia.com/system/selfservice.controller?configuration=1002&PARTITION_ID=1&TIMEZONE_OFFSET=&usertype=&VM_CUSTOMER_TYPE=cable&cmd=VIEW_ARTICLE&article_id=245759

  How to change the wireless network password

  http://help.virginmedia.com/system/selfservice.controller?configuration=1002&PARTITION_ID=1&TIMEZONE_OFFSET=&usertype=&VM_CUSTOMER_TYPE=national&cmd=VIEW_ARTICLE&article_id=2775

  You can also post your query on Virgin Media forum for additional help:

  http://community.virginmedia.com/

• I have the same problem as the guy from the system restore, however, I received a notice that a prgram wrote a file in the box use windows for virtual memory

  one of such custom of norton of the tip allow the system restore work. tried to uninstall norton online and it locksup after, uninstall the type selection screen. neither work. also it locksup in normal mode, please wait screen after logo & carillon.

  Hi Terror64,

  1. what you trying to accomplish?

  2. Why do you want to do a system restore on the computer?

  3. What is the exact error that you receive when you perform the system restore?

  If you want to uninstall Norton from the computer then use the removal tool using the link below.

  Download and run the Norton removal tool to uninstall your Norton product

  http://us.Norton.com/support/kb/web_view.jsp?wv_type=public_web&docURL=20080710133834EN&LN=en_US

  Important: Antivirus software can help protect your computer against viruses and other security threats. In most cases, you should not disable your antivirus software. If you do not disable temporarily to install other software, you must reactivate as soon as you are finished. If you are connected to the Internet or a network during the time that your antivirus software is disabled, your computer is vulnerable to attacks.

• Must system image file be in the same place, that it was created for Windows 7 to detect when you perform the system restore?

  When you restore system files and settings from a system image, the WindowsImageBackup folder must be in the location that it was created?

  -For example -.

  I create an image system on an external HARD drive, then later I want to do a restore of the system from this image, the WindowsImageBackup folder must be in the same place, it was created (in this example, the root of the external HARD disk) for Windows 7 to detect?

  Hi Keylonta,

  Yes, it should be in the same hard disk and if it is not listed in the system restore point it is not possible to locate or detect the folder "WindowsImageBackup.

  Hope the helps of information.

  Let us know if you need help with Windows related issues. We will be happy to help you.

• I think that my 5s has been hijacked. How can I check and fix it?

  I think that my 5s has been hijacked. How can I check and fix it?

  Unless your device has been jailbroken, it has not been "diverted." What makes you think that what has happened? What did you do to try to fix your problem?

• I install Windows Media Player 11 on Dell Dim/3000, I received the message to turn the system restore. How do I do that? Turn on SR, where is the button?

  I install Windows Media Player 11 on Dell Dim/3000, I received the message to turn the system restore. How do I do that?  Turn on SR, where is the button?  How can I enable the system restore?  I want to install Window Media Player 11 and this is the message I received. WMP 11 I need to re install and everything about the need to restore the system to have anyting to install?  I need HELP as soon as POSSIBLE. I'll wait for a response.  I can't play all the music that I recently downloaded.

  I received the message that the system restore is disabled.  How do I turn it on, turn so I can install WMP 11 new or I need to reinstall the latest version of WMP11 again?  Help ASAP, I'll wait for a response.

  Hi AnnieStewart,

  1. What happens when you try to listen to music downloaded in Windows media player 11?
  2. What is the complete error message you receive when installing Windows media player 11?

  See the articles to turn on system restore on the computer.

  How to turn on and off on system restore in Windows XP

  http://support.Microsoft.com/kb/310405

  Steps of troubleshooting for problems when you try to use the System Restore tool in Windows XP

  http://support.Microsoft.com/kb/302796

• I can't do the system restore and I have nothing on my "All programs" button, which means that I have not accessories, System Tools, etc. How can I get that back?

  I can't do the system restore and I have nothing on my "All programs" button, which means that I have not accessories, System Tools, etc. How can I get that back?

  Hello CalebCox,

  I suggest that you try the methods below to resolve this issue.

  Method 1:

  This problem can be caused due to infection by the Virus. I suggest that you run a virus scan on your computer using Microsoft Safety scanner and check if you have the same problem.

  http://www.Microsoft.com/security/scanner/en-us/default.aspx

  Check if you have the same problem in the new user account.

  You can refer to the link below, which will give you information on how to create and configure user accounts in Windows XP

  http://support.Microsoft.com/kb/279783

  If works, you can copy data to the new user account:

  http://support.Microsoft.com/kb/811151

• Have you had to face the problem, that there is no an error but just can't open Lightroom app on your computer? I have a photoshop, but not Lightroom work and plan creative cloud...

  Have you had to face the problem, that there is no an error but just can't open Lightroom app on your computer? I have a photoshop, but not Lightroom work and plan creative cloud... Almost all tried, nothing does not help and may not always know where the problem...

  Windows. I just did a cover on my pc and reinstalled cloud once again, now everything seems ifne, thank you

• The system restore points, how can be stored/kept?

  I had problems restore XP on the computer of a friend.  I can't after installing SP3, a question that will be asked in a separate post.

  In an effort to not having to do a full system recovery on the computer in question, with this latest attempt to recover the operating system and install all updates, I started the creation of restore points for the system after each step, I took to get things running and upward.

  And that is, after installing SP3, with installation fails and then going back until the restoration of the system to an earlier configuration, I found none of the points longer existed the system restore.   :-(

  Is there a maximum number of restore points in the system that can be stored in XP and later Windows operating systems?

  Hey, Jose,

  I'm sorry for the late reply to your post, but I removed the weekend baby a bad back that makes me mad.

  I'll try to put your comments in quotes, with my response immediately after, flea.

  The hard drive is 160 GB.  The car had 2 partitions, the recovery partition.  Before reinstalling everything from scratch, I've used Easeus Partition Manager Home Edition to create a 3rd partition to move the original data of C:\ drive to your new partition so my friend can sort files and keep it as he and his family want and discard the rest.  I just copy everything that I can, because I don't know who, what, and where they have stored files.  I actually found a file stored in the recovery partition, but I moved it.

  "Here are some reasons that XP will remove RPs.

  'http://support.microsoft.com/kb/301224 '.

  • Read the KB article.  To make sure that we are on the same page, I get "system drive" means C:\.
  • Lack of free space should not be a problem.  C:\ is 32 GB, 10.1 GB used.  D:\ is 111 GB, GB used 21.2.  E:\ is 5.98 GB, used 5.00.  E: is the recovery Partition.
  • No disk compression
  • Did not display the warnings system restore.
  • I do not turn off System Restore fo any player.
  • This isn't an upgrade of the system to an earlier version, I just turn on the computer the way it came, new out of the box.
  • The system was always restored from the recovery Partition.  I have a set of restore CD, but they have been written about the recorded side with a felt marker.  I have not tried cleaning off the coast, this will be my absolute last resort.   :-)
  • Disk cleanup does not give me tabs and options as mentioned in the article.  I guess that these show upward when you upgrade from a previous version of the operating system.
  • I don't think I'm under low disk space.    :-)
  • Does not not after the age of 90 days, nor have I have reduced the size of the data store.  I didn't know either of these possibilities before you read this KB.  See how the KB has been written, I suppose that these two parameters can be changed.  Can you point me in the right direction for how to do this?  I have a computer multiboot (XP Pro and Vista Ultimate Edition) and I would change the date of age never delete a restore point, because the computer is rarely used nowadays.

  "I don't know that when you install SP3 and it goes well, a single method to uninstall SP3 is to restore the system to the time before SP3 was installed:

  http://support.Microsoft.com/kb/950249

  This would mean that you would still RPs after that installation of SP3 (if things were favorably) and that was my observation. »

  • When I started to have problems, I simply started from scratch with a Destructive Restore process.  When I'm really frustrated after several failures, I started looking for a quicker way to get back to a point just before I installed SP3 and found this KB.  After that, it was the safe boot mode and using the Control Panel Add/Remove programs to remove the SP3.  And I got very, very familiar with the process!   Laughing out loud

  "Other things I can think can remove all restore Points are third party maintenance and system cleaning tools, poorly designed or introducing a third part malfunction anti malware tools, etc..".  Malicious software can disable the system restore (temporarily of course), but I never saw remove Restore Points.  The XP disk cleanup will also delete all but the most recent restore Point. »

  • Other Easeus Partition Manager, I never got far enough along to try any other third party software.  My "modus operandi" is updated completely OS and Internet Explorer before I install any other software and update it.  However, with the idea of the recovery Partition, do not not the software isn't an option.

  "If they are all absent, it always seems that a human element involved somewhere."

  • I learned long ago, the days of 8-bit, unless there is a real hardware failure, almost all computer problems can be tracked to a human being.
  • Not all system restore points were missing, just the first I created which is involved by creating a restore point after you change the system, such as the removal of my friend doesn't use software.  For example the software to connect to an ISP with a modem.  They got the DSL.   :-)
  • All deletions of software would help speed up the computer for his own use.  The rest of the family is like me today, Mac users.   :-)

  "To answer your question:

  The settings default for the accumulation of Restore Points is 12% of the size of the monitored hard drive or 90 days (both values are adjustable of course).  Microsoft seems to draw attention to the way in which the Restore Points "live."   "Then, the oldest Restore Points will start to get deleted to make room for new Restore Points (see also KB950249).

  • 12%, eh?  Is it possible, in fact, I have exceeded this number by 12% by creating too many restore points?  Knowing what I was doing, which seems to be a possiblity says, as restoring all points were never deleted, only the earlier.

  I'll certainly post the info you suggested in the post on the SP3 forum.

  "Do or do not. There is no test. »

  • "Luke, the force is with you." :-)

• How to change group policy for the system restore will create restore point

  I recently installed an SSD with windows 7, it's the default OS and hard drive on a system dual boot. I also have my old HHD with windows vista home premium. I had problems using the restore of the system with the SSD drive and read on a forum that the restoration of the system causes problems when it is used on an SSD. I have disable restoring the system to the SSD, but still he had checked to allow restoration on the vista disk and a 500 GB drive, I have use for storage.

  I managed to create a restore point when you are using windows 7 OS, but when I used my vista drive, and wanted to create additional restore points for two HHD disks, it does not allow the creation of restore points by group policy settings. I regularly create restore for the SSD disk and have created one for the HHD Vista since the system restore does not create additional restore points now.

  How can I change my group policy settings to enable restore points to create the disk under Vista. I don't remember changing anything that might have caused it, is there a chance that a horse of Trojan or virus caused this? I have Webroot antivirus and currently aired Kaspersky Anti-virus on Vista drive. I also ran the Microsoft safety scanner in safe mode and normal startup mode, none of the virus scanners have found problems, so I'm pretty sure I don't have a Trojan or a virus.

  To the point, how to make appropriate changes to allow the restoration of the system to work for my two HHD disks.  Better yet is there a way to restore completely all original windows default system settings without having to do a clean reinstall.

  You can provide any help would be greatly appreciated

  Thank you

  Skyraider 33

  Hello

  You receive an error message when creating a new system for Windows vista restore point?

  Using the Group Policy Editor

  If your edition of Windows Vista includes the Group Policy Editor (gpedit.msc) snap-in,

  Follow these steps:

  1. Click Start, type gpedit.msc and press ENTER
  2. go to the following branch: Computer Configuration | Administrative templates | System | System restore
  3. double click on disable the Configuration and set it to not configured.
  Note: If the above setting is already set to not configured, set it to "Enabled" and click on apply. Return back the setting to not configured, then click on apply, OK.
  4. exit the Group Policy Editor.

  If using the Group Policy Editor do not fix the problem, try the registry fix from the following.

  Note: Serious problems can occur if you modify the registry incorrectly. Therefore, make sure that you proceed with caution. For added protection, back up the registry before you edit it. Then you can restore the registry if a problem occurs. For more information about how to back up and restore the registry, click on the number below to view the article in the Microsoft Knowledge Base:

  How to back up and restore the registry in Windows

  http://support.Microsoft.com/kb/322756

  Using the registry editor

  1. Click Start, type regedit.exe and press ENTER
  2. navigate to the following key:
  HKEY_LOCAL_MACHINE-Software-policies-Microsoft-Windows NT------SystemRestore
  3. in the right pane, delete the value named DisableConfig
  4. exit the registry editor.

• "Unable to make the system restore point", when I ran registry cleaner Norton

  I just installed Norton 360 on the desktop with Windows Vista Home Premium OS. When I ran the registry cleaner, the error message appeared saying: "Unable to do the system restore point" . I contacted Norton, but they said it's nothing to do with Norton, I need to contact Microsoft. In addition, as suggested in one of your responces, I tried to create manually restore point, but I don't see the system protection tab on my system properties pop-up screen.

  I just installed Norton 360 on the desktop with Windows Vista Home Premium OS. When I ran the registry cleaner, the error message appeared saying: "Unable to do the system restore point" . I contacted Norton, but they said it's nothing to do with Norton, I need to contact Microsoft. In addition, as suggested in one of your responces, I tried to create manually restore point, but I don't see the system protection tab on my system properties pop-up screen.

  I don't know what prompted to run registry cleaner. I would sincerely say that you read the following article first before you take back this terrible task to play with the registry.
  Why you should not run registry cleaner:
  http://www.edbott.com/weblog/?p=643

  Here is the tutorial on how to create a system restore point:
  http://www.Vistax64.com/tutorials/76332-system-restore-point-create.html

  t-4-2