ThinkPad Yoga S1 2nd Gen crashing in Tablet Mode

Similar Questions

• Keyboard yoga 900 arise does not in Tablet Mode

  I've had settings and devices and clicked on the box I was supposed to click on.

  In TABLET mode, when I touch the Google to enter text inside bar, the keyboard does not appear, so I have to manually launch the keyboard then when I finished I have to manually close the keyboard because there is no button 'DONE' or 'GO' or 'ENTER' on the keyboard in tablet mode.

  Thank you for your suggestions.

  I'm afraid that the resolution of this problem lies with Google. The Chrome browser does not trigger local keyboard in tablet mode. It is a desktop application that does not use the API of Windows 10 news for this feature. Personally, I doubt that Google will rush to remedy this.

  As you have discovered, Microsoft Edge brings up the local keyboard in tablet mode. IE11 goes.

• Update the series/model number in the BIOS (ThinkPad 2nd Gen Helix)

  Hello! I have a ThinkPad 2nd Gen Helix (model 20CG000QUS), I replaced the motherboard in (because I'm with a Lenovo authorized service depot), but I'm unable to update the series/model number in the BIOS. I tried the utilties USB and bootable diskette and nor will not work (I can't boot from either one sense). This is despite me turning off the Secure Boot option in the BIOS. When I enter my credentials for the key to maintenance/diskette, I find the download ok in, but on the page for the supported systems for this key maintenance/diskette, the Helix model I have is NOT LISTED. I tried to update using other utilities and I get the words of INVA LID, and I can only replace the "LID". So, basically, I'm stuck.

  Any suggestions? Thanks in advance.

  PM sent

• Cursor does not see the increase if the starting mode Tablet - Thinkpad Yoga

  I noticed that if I boot my TPY in tablet mode, the cursor simply does not appear even if I flip the laptop mode. I can only solve it by restarting and booting from laptop mode.

  If I boot from the portable mode however, and return to the Tablet mode, the cursor appears again when I flip it back in laptop mode.

  Anyone else suffering from this problem too?

  I solved this problem after you have reinstalled the time pilot 3rd. Not too well why the problem disappeared

  However, a new problem is surface (a less serious). the mouse driver seems to be loaded rather late in the boot sequence, so after seeing my office, the cursor appears only after 5-10 seconds. If I turn off the touchpad in Device Manager, the cursor appears immediately at startup (without appropriate drivers loaded). guess it's a bug.

• ThinkPad Yoga 14 (20FY) - can not auto-rotation, Missing in Action Center - WIndows 10

  I just did a clean install of Windows on my Thinkpad Yoga 14 10. I tried to install all the drivers that I could. The only thing missing for the laptop, it's that I can't auto-rotation in tablet mode. Auto-rotation setting is missing from the center of the action and enter the display settings is not an option to allow auto-rotation. I also tried enabling the sensor, the sensor monitoring service and Service of sensor data with no luck. What are the conditions to get this working?

  Thank you!

  I finally got it to work. After some intense searching, I found the driver that I had to install. It ends up being the Intel integrated sensor Solution. Installation of the package has work as well as the addition of a "sensors" section in device with drivers HID sensor Manager.

  http://support.Lenovo.com/us/en/downloads/ds112057

  It's weird that the driver does not show in the ThinkPad Yoga 14 drivers page.

• MDT 2013 Thinkpad Yoga 12 - WinPE boot problems

  We have two models of Thinkpad Yoga and use the same ethernet USB dongle to run MDT and their image with Win 8.1.

  Type 20 c 0 works very well. When we arrived the 20DK of a new type, we had some problems with our image of fat because of the different hardware profile and we weren't using a configuration of total control for drivers on our MDT.

  I created a new MDT installation on a virtual machine and I use the method of total control of the management of drivers by model. I have a profile of selection for winPE and imported the drivers of storage and network for both models (x 64 only, we don't have any x 86). I tried initially the USB3 Ethernet adapter driver I found under downloads for the 20 c model 0 but have tried since the upload of pack pilot SCCM and other I found specifically for the adapter realtek and SCCM, but nothing has changed. The current versions of pilot in my winpe folder are 8.15.0701.2014 and 8.8.0911.2013. Have updated the deployment share, copied the contents of the x 64 folder and copied the litetouchx64.wim in the sources on our USB startup folder and renamed to boot.wim.

  Currently on the 20DK I get the initial screen for MDT spash with blue background, but before any connection charges of screen I get the blue screen of crash with error (ndis.sys) System_thread_exception_not_handled. I guess I do know for sure that it is a problem of network driver but because it fails before the same connection to the deployment share it led me to believe that this was the case. I tried to turn off 3 USB mode in the bios to see if this will have an impact, and he didn't.

  The 20 c 0 still works fine and I was able successfully to the image (from my old wim of fat that I copied from my old server mdt)

  Completed up to add all the drivers for this model in the folder of WinPE drivers and who took care of her.

• ThinkPad Yoga gestures on touch screen

  Hello

  I have the problem that all the actions of Windows 8.1 works perfectly well with the Touchpad, but most does not work with the touch screen.

  Pinch to zoom in, click on a finger or selection or longer a finger click for menu right click drop-down menu work fine.

  Especially in tablet mode, it's annoying to have to enter the pen to use slide from the side of the screen to the right to open the bar of charms and not being able to use my finger.

  I guess it's just a problem of parameters which is a little hard to find - or I'm blind looking for it - because with the exception of theses actions the touch screen works fine and precise as it should.

  Thanks for any help you guys can give me!

  PS. : The Machine is a Thinkpad Yoga

  EDIT: Ok, I've just discovered in playback Mode when the camera is on the right side, everything work perfect - the other 3 positions the problem is still

  I had a similar problem on mine. Recalibrate the touch screen fixed.

  Many people have problems with this on Windows 7 devices that came with touchscreens when at the edge of the touchscreen is not capable of being touched. I'm guessing that Windows 8 requires the button start to limit (or beyond the edge) of the screen for the gesture to be detected.

  When the screen is badly calibrated, when you touch the edge of the screen, it registers as just inside of the edge and is detected as a click instead. Given that the calibration does not change with the rotation of the device, I'd be your vertical calibration is ok (because it works in playback mode), but that your horizontal calibration is a little off.

  If you are looking for "Calibration" in the Control Panel, the "Tablet PC Settings' contains the menu to recalibrate the touch (and the pen if you have a) entries

• Question of digitizer ThinkPad Yoga

  I learned that the scanner with Helix cannot be used as an eraser, the digitizer ThinkPad Yoga has the same problem? Thank you

  the pen digitizer on Helix, TPT2 and Yoga all do not have the traditional gum of the traditional ThinkPad X series Tablet function. There is a button on the digitizer pen, you can use the eraser function.

  You can also get X Series digitizer pen that has a function of gum, they work with the ThinkPad Yoga (and are what I use now).

• My iPod Shuffle 2nd Gen the same song just rehearsals

  I have an Ipod 2nd generation shuffle, and he will never play the song I put on, he would usually play about 6 of the continuously, despite having lots of songs on this subject. I recently restored to factory settings and got 64 songs on it, but he will play only one of them, which she repeats,

  The shuffle uses flash storage.  Flash storage ends by wears.  Thus, the cause may be a hardware problem on your shuffle, especially since a 2nd gen shuffle is about 10 years at this point.

  One thing you can try is to reformat the shuffle outside iTunes store.  This must be done in a particular way.  Are you using a Mac or a Windows PC?

• Adobe flash plugin not supported in the e bike 2nd gen (xt1506)

  fix Adobe flash plugin not supported in the bike e 2nd gen (xt1506) please.

  Nothing for Mozilla to difficulty. The phone uses a quad-core processor, in which the discontinuous old Adobe Flash player 11.1.x does not support because he can't stand of the ARMv7 processor.

• How can I disable 5 GHz on 2nd GEN Airport Express?

  I read the previous explanations:

  1 / system preferences > airport > click Wireless on the left, click Advanced, search the list for the 2.4 GHz network and make sure that it is at the top. But I can't find such a list.

  2 / airport utility > modify > click on the wireless tab. What wireless tab? Not easy for me at the airport 6.3.1.

  There must be a way, but I'm just not see it. I'm told my wi - fi enabled printer is more likely to work if she is not confused by the existence of a 5 GHz channel.

  Help much appreciated.

  How can I disable 5 GHz on 2nd GEN AirPort Express?

  You can not.  The 2nd Gen AirPort Express is a double router broadband simultaneously ... so the 2.4 GHz and 5 GHz are always on... or... the two are always turned off if you turn off the wireless.

  What you can do, is have a different name for the 5 GHz network, so the 2.4 GHz network has a name and the 5 GHz network will have a different name.  The two networks will continue to use the same wireless network password.

  Not sure if that would help your real question... what it could be.  More details would be useful.

• Lenovo Thinkpad Yoga X 1 touch screen does not work

  Hi all

  I just bought a brand new Thinkpad Yoga X 1 and out of the box, the touch screen is not recognized by windows and no entry through fingers or via pen works.

  I would be very happy if someone could tell me if it's just a wrong settings or if the laptop is faulty.

  Thank you in advance,

  Torben

  Hello Peter,.

  Thanks for your quick response. Unfortunately, it was not a software problem, but the dealer that I bought traded without any hesitation and now I have a new unit that works like a charm.

  Best regards
  Torben

• Switch ThinkPad Yoga Clickpad with new TrackPad

  Hello world

  The new ThinkPad Yoga 12 seems to have the same dimensions as the original ThinkPad Yoga. Does anyone know if it is possible to install the new TrackPad with the buttons of the 12 tons per YEAR in the old model? Or are there hardware/driver problems?
  I'm sure that many have the same question for their machines, for example the T440, what about those?

  Thank you!

  
  

• Help of digitizer Lenovo Thinkpad Yoga S1

  OK, so I just got a thinkpad yoga S1. The that I had was the one without the digitizer pen automatically installed in the side of the computer. The pen came separately and it is the same as that exact one used with the version that comes with the pen. I do not know the product code or even what her name. Which driver should I install and how can I register the product? Also, because the version I have has as a black spot where the digitizer normally goes is there a way I can get out and be able to accommodate the supplied stylus separately?

  I think that there are two options, that it is either the stylus or it doesn't. Who does not have integrated pen does not support the feather because of the used Panel. That's what I remember when I was doing research in this unit.

• Motorcycle G 2nd Gen global and French freq.

  I plan to use a soon-to-be purchased Moto G 2nd gen Global and leave me puzzled the frequency and speed of the network are compatible (I watch but my sources seem to be mixed).

  My main goal is he reliable use 3G and may choose to wait for a 4G Unit...