This GROUP must be assigned to USER to CONNECT using vSphere Client

Similar Questions

• How to let the user AD login to vSphere Client

  I have a small infrastructure Configuration. I'm no expert. Just trying to get this to work for one of my class projects where I need to let the members of my group access to a virtual machine. I have a domain created in AD user, and I like having this domain user to be able to connect on the vSphere Client to manage one of the virtual machines. How can I do this?

  Now, if I try to login with one user other than the domain administrator, I get this error message:

  the vsphere client failed to connect to 'servername '.
  

  you are not allowed to log on the server: "servername."

  You will need to login with the administrator account and assign a role to this user AD - this combination of user and role provides access to environment-

• How to assign the user role by using a script?

  Hello

  I want to assign a role permission set to a local ESX 4 install any user account with a CLI command, so I can do during the ks.

  Did anyone done this before?

  Tips and tricks are welcome.

  THX

  Take a look at the vCLI esxcfg-user command that can be done outside the Console of the ESX Service or you can take a look by using vimsh on the Service Console:

  [root@himalaya ~]# vmware-vim-cmd vimsvc/auth
  Commands available under vimsvc/auth/:
  admin_account_disable     entity_permission_remove  role_add
  admin_account_enable      entity_permissions        role_permissions
  admin_account_is_enabled  permissions               role_remove
  entity_permission_add     privileges                roles
  

  =========================================================================

  William Lam

  VMware vExpert 2009

  Scripts for VMware ESX/ESXi and resources at: http://engineering.ucsb.edu/~duonglt/vmware/

  Twitter: @lamw

  repository scripts vGhetto

  Introduction to the vMA (tips/tricks)

  Getting started with vSphere SDK for Perl

  VMware Code Central - Scripts/code samples for developers and administrators

  150 VMware developer

  If you find this information useful, please give points to "correct" or "useful".

• Jabber user cannot connect using the AD account

  Hello

  I have a question about jabber/movi registering on local control of the VCS. They can't log in using their Jabber account on the control of VCS that have been configured on TMSPE. The connection error message is ' user/password incorrect or field name '...

  Jabber users who were configured manually on the TMS can sign in successfully.

  Connection between TMS and AD is ok and import AD users successfully.

  What should be the correct configuration on the authentication policy control VCS?

  > Sub-area by default?

  > Deafault area?

  > The traversal area?

  I also need to plug the VCS control on the announcement?

  Thank you

  Acevirgil

  "Verify the identification information" on the three - and Yes, the VCS - C needs to be added to our era.

  /Jens

  Please note the answers and score the questions "Answered" as appropriate.

• Why do we establish oinstall under the main group of oracle and grid users?

  IM and RDBMS version: 11.2.0.4

  Platform: RHEL/OL 6.5

  Why do we set oinstall under the main group for OS proprietary oracle software and grid?

  I would say "The Central stock" is the watchword here.

  orainstall is actually called the "oraInventory group." Member of (oracle and grid) users who belong to this group must read, write and execute privileges on the directory Central inventory which will serve as a catalogue of all oracle related software installed on the server. Whenever users put oracle or grid to level, the patches from the software they own, they should be able to update the respective news in this catalogue.

• Unable to group message when an android user is involved

  Also recently there is 6-9 months, I could text of the group with a particular set of contacts, and then all of a sudden my attempts to send texts of this same set of contacts group failed with "unable to deliver.  I stopped receiving their texts of the group.  I tried texting each contact individually and managed.  I tested other contacts and texts of the group, and those who have succeeded as well.  Finally, I have narrowed the problem down to a particular contact that uses an Android device - when this contact is involved in a group text so I can't send or receive messages from this group text.  Other iPhone users are able to text with this contact group - the problem seems to be related to my iPhone.

  Contact Android has never owned an iPhone, so it is not bound in the middle of old iPhone sound that is left behind on Apple iTunes config.

  I tried to remove and re-add that particular contact, remove all my messages, hard, reboot, upgrade to the latest iOS, etc.. Nothing works.  Any suggestion would be appreciated.

  Hi trask77,

  Thank you for using communities Support from Apple!

  It seems that you are having problems with the group with an Android user messaging.  You can find the following articles useful: send a message from your iPhone, iPad or iPod touch - Apple Support Group

  If you cannot send or receive messages on your iPhone, iPad or iPod touch - Apple Support

  In addition, if you have the person using the remove device Android conversation and then start a new group message to see if it allows messages to go through.

  See you soon!

• Dynamic assignment of users

  Hello

  I'm trying to assign users within my process and need advice with her dynamic way. The next two steps describe briefly what I'm trying to reach

  1. a user starts the process to copy data in the PDF file and the completion of the task.

  2. based on the information filled by the first user, I need to determine who the user for the next job is going to be and then assign the task to the user accordingly.

  I don't have the option of using several operations task assign and then by setting the logic in the course rating, as there are too many users can be assigned to the second task (there are more than 50 potential users, where the second user should be selected)

  I am fairly new to Livecycle and among the options I've seen so far, here are a few questions that I need help with

  1. the only option within the operation assign tasks that allows you to assign the user dynamically is to use an XPath expression. If I had to use it, should I be integrating the logic within the form itself and then use the XPath expression to search for the user by the dynamic update of the form after the first user completes the task?

  2. is there another approach to achieve this other than having the selection logic of the user defined in the form itself? In my view, incorporating the logic in the form might not be a good idea because this may have implications on performance and also have information in the form user himself doesn't seem right.

  3. is there an operation I could use, which would contain the logic that I need to determine the next user, and then assign the task to the user depending on the result of the operation?

  I hope that someone would have surely run in this situation before so ideas/suggestions will be appreciated.

  Thank you
  Verdier

  "1. the only option within the operation assign tasks that allows you to assign the user dynamically is using an expression XPath."

  Yes

  "If I had to use it, should I be integrating the logic in the form itself and then use the XPath expression to find the user by updating dynamically shape after only the first user finishes the job?"

  I depends. If you can get to this side server, it woulb be better. If you need to make a change to something, you don't want to change the shape.

  "Is there another approach to achieve this other than to have the logic of selection of the user defined in the form itself?"

  I'm not sure where the logic for the next user, but you could make a database or web service gives the word of the process to get the next user instead.

  "I think integrating the logic in the form might not be a good idea because this may have implications on performance and also have information in the form user himself doesn't seem right."

  I agree.

  "Is there an operation I could use, that would contain the logic that I needed to determine the next user and then assign the task to the user depending on the result of the operation?"

  Yet once again, I need a little more information as to where is the (logical) info.

  Jasmine

• Users of VPN cannot connect using application using port 3404

  VPN users are connecting using vpn tunnel to destination of a pix 515e however, they are unable to use the connection on port 3404 application. He used to work, or so I was told, but it no longer works. What I am doing wrong? Please notify. Here is the config:

  IP 192.168.0.3 - dealer 192.168.0.5 pool room

  IP pool local DYNAusers 192.168.1.2 - 192.168.1.20

  IP pool local DYNAusers2 192.168.1.21 - 192.168.1.254

  vpngroup address pool DYNAusers PCPVPN01

  vpngroup 192.168.x.x wins server PCPVPN01

  vpngroup PCPVPN01 DYNAsplit of split tunnel

  vpngroup idle 1800 PCPVPN01-time

  vpngroup password PCPVPN01

  vpngroup address pool DYNAusers WELLVPN01

  vpngroup 192.168.x.x wins server WELLVPN01

  vpngroup WELLVPN01 DYNAsplit of split tunnel

  vpngroup idle 1800 WELLVPN01-time

  vpngroup password WELLVPN01

  vpngroup address pool DYNAusers2 SRVCVPN01

  vpngroup 192.168.x.x wins server SRVCVPN01

  vpngroup SRVCVPN01 DYNAsplit of split tunnel

  vpngroup idle 1800 SRVCVPN01-time

  vpngroup password SRVCVPN01

  permit 192.168.1.0 ip access list DYNAsplit 255.255.255.0 192.168.0.0 255.255.25

  5.0

  permit access ip 192.168.0.0 list DYNAsplit 255.255.255.0 192.168.1.0 255.255.25

  5.0

  DYNAsplit list of allowed access host ip 209.42.50.82 192.168.1.0 255.255.255.0

  DYNAsplit ip access list allow any 192.168.0.0 255.255.255.0

  access-list DYNAacl 60 allowed ip 192.168.1.0 255.255.255.0 192.168.0.0 255.255.255.0

  Permitted connection ipsec sysopt

  Answer sheet crypto ipsec transform-set esp-3des esp-md5-hmac Dynamics

  Crypto ipsec transform-set esp-3des esp-sha-hmac To_NHP

  Crypto-map dynamic DYNAmap 30 game of transformation-dynaset

  card crypto VPNtunnels 30-isakmp dynamic ipsec DYNAmap

  map VPNtunnels 40 ipsec-isakmp crypto

  crypto VPNtunnels 40 card matches the address 150

  card crypto VPNtunnels 40 set peer 70.151.5.114

  card crypto VPNtunnels 40 the transform-set To_NHP value

  card crypto vpntunnels 40 the duration value of security-association seconds 3600 KB

  s 4608000

  VPNtunnels interface card crypto outside

  partner-30 map ipsec-isakmp crypto

  ! Incomplete

  ISAKMP allows outside

  ISAKMP key address

  subnet mask 255.255.255.255

  ISAKMP nat-traversal 20

  part of pre authentication ISAKMP policy 30

  ISAKMP policy 30 3des encryption

  ISAKMP policy 30 md5 hash

  30 2 ISAKMP policy group

  ISAKMP duration strategy of life 30 86400

  part of pre authentication ISAKMP policy 40

  ISAKMP policy 40 3des encryption

  ISAKMP policy 40 sha hash

  40 2 ISAKMP policy group

  ISAKMP duration strategy of life 40 86400

  Hello

  It is good to hear that the problem has been resolved. Please note do you have for the job?

• Cancel the assignment of users to a group of IOM using the API/Java Code

  Hello OIMers,
  
  Can you please tell me how can I delete the assignment a belonging to a group through code?
  
  This is the case:
  
  When the user is deleted from Active Directory, I want to cancel the user from a group, assumes that the name of the group is "employed full-time."
  
  Currently how do is click the profile in the administration Console, then select group of drop down and then select Cancel this group assignment.
  
  Please tell me how to do the above tasks programmatically, it would solve my problem.
  
  
  Thanks to all in advance.
  
  Kind regards
  
  VSN

  Have you tried findGroups?

  You get a result set with only one entry and then just do a:

  long groupKey = groups.getLongValue("Groups.Key");

  Hope this helps
  -Martin

• How to assign a user to a variable?

  for example:
  
  username: * scott *.
  
  under this user, there is a table called employee.
  
  Select * from scott.employee; (Normal mode)
  
  I want to assign the user scott to the variable a and view the table as
  Select * from a.employee;
  
  Is it possible to assign a user to a variable?

  In SQL, a variable is allowed to be used only as a value that is passed to a clause where clause. You cannot use variables that contain the name of the object in the static SQL. You must build the SQL Dynimically.

  Here is an example.

  declare
    mySchema varchar2(100);
    lSal emp.sal%type;
    lEmpNo emp.empno%type;
  begin
    mySchema := 'SCOTT';
    lEmpNo := 100;
    execute immediate 'select sal from ' || mySchema  || '.emp where empno = :1' using lEmpNo into lSal;
  end;
  

• How can I change the group that is assigned to a contact?

  I synchronize contacts on my 2 iPhones, 2 iPads, MacBook Pro and iMac. I would like to change some of my current designations of the group for some of my contacts. How can I change the group that is assigned to a contact?

  Mark,

  First of all, make sure that you deal with iCloud contacts.

  With the help of your MacBook Pro or iMac Contacts open and remove unwanted contacts outside the group. You will be asked "do you want to remove the card for 'XXX' or delete Group 'YYY'.» Choose "remove group.»

  Then go to "All Contacts" and drag the name of the new group.

  If you want to see what the contact belongs to groups, click on the contact and press 'option '. All groups with this name will be highlighted.

  

• I want to use an iPod touch to play my iTunes music in my car. To do this music must be stored on the iPod. It seems more has no way to do it. Is there a solution?

  I want to use an iPod touch to play my iTunes music in my car. To do this music must be stored on the iPod. It seems more has no way to do it. Is there a solution?

  Refer to the chapter of the manual music

  9.1 iOS iPod Touch User Guide

  See also:

  I get message says: CONNECT to THE WI FI TO PLAY music.

• My computer won't let me connect to one of my accounts. The screen remains blue or said: "this product must be activated with microsoft" why is this?

  My computer crashed on me and when I tried to reboot, the computer would not let me connect to my own account, nor my accounts of family members. I tried to use the System Restore tool, but the computer says that the menu command / I'm trying to use does not exist. I don't have the CD or the floppy to boot. When I try to log in to my administrator account on the computer says, "this product must be activated with Microsoft."  Can anyone help?

  Hello

  If you are unable to connect to any user account then, how did you try the System Restore tool?

  We will try these steps and check.
  Step 1: Use know last good Configuration option and check.

  Step 2: Check to see if the problem persists in safe mode. If the problem persists not in safe mode and then try to perform the clean boot.

• Splash Screen dump - "Beware, this system should be reserved for users... "click OK

  Bought a used computer, must have been a computer on a network.

  First screen that is displayed after the MESSAGE, it's a boring that reads

  "Attention, this system must be booked... authorized users use may be monitored, reported to the police... "and so on, I have to click on > OK pre-start continues to start in Vista Home Premium.

  It of a pain in the _, reminds me of big brother watching, and I hate it. I don't seem to be part of Vista or start-up, maybe that is part of Microsoft Network Monitor 3.1?

  Tried searching all files including hidden and system, tried to search in regedit, checked the sites Google and Microsoft, do not know where else to look at.

  Any suggestions on where to look or what to try or where to post this question would be greatly appreciated!

  So close to David! The search box found no, so instead, I went to > RUN, typing REGEDIT, navigated > computer > HKEY_LOCAL_MACHINE > software > Microsoft > Windows > CurrentVersion > policies > system is where I saw in the list in the other panes LegalNoticeCaption and LegalNoticeText, that would right click and choose Edit value, then a box pop up with the word "warning" and I would like to delete , even with the next line. I also discovered the button SEARCH in the drop-down menu EDIT where I could enter 'LegelNoticeText '. As well, a button preferred so I could find my way back.

  I guess this would be the place to go to add my own chip - has * page on machine of my boyfriend.  :)

  Then I noticed more high it was a line for annoying the other screen to DisplayLastLogon and changed the value from 1 to 0.

  I was amazed by the quick response and appreciate the help. I even learned that RegEdit is not so scary.

  Thanks David!

• Group Lock VPN 3000 binding users to their group

  I only use a 3015 VPN with VPN Client 3.5.1 using IPSEC. Cisco ACS 3.0 is the radius, all users of the authentication server. If I use a group on the client, I can log in using a different username to groups.

  It is interesting then you get the other privileges of groups for this user as you would expect.

  If I select group Lock on core group settings is not any effect.

  I want to restrict the access of clients to the users group in its own configured.

  I use an external authentication to the Radius ACS server for groups.

  Thanks for any help you can give.

  Mark

  Hi Mark,

  You can follow the example of configuration to:

  http://www.Cisco.com/warp/public/471/altigagroup.html

  Thank you

  Jean Marc