This is - HP Recovery Manager - file NOT back up backup RAW photo files?

Similar Questions

• Recovery Manager is not open / create recovery discs

  I have a laptop of G61-410SA and have problems with the hard drive. So, I would first try to reset it to factory settings. Now, I would like to create the recovery disks, but the Recovery Manager does not open and when I go through F11, creating a disk is not available.
  The laptop has always worked with Windows 7 x 64, never been updated. Out of warranty however. Have had a lot of blue screens and now 303 in diagnosis. Always be able to start, but very slow.

  Is there another way to create these disks, I can see the recovery in D partition.

  Thank you.

  At this point you can consider purchasing at HP or HP partner. They are fairly cheap ($25,00 USD)

• The Acer recovery management will not run on switch 10

  By the switch of my Acer 10 owner's manual, there are steps proposed to "create a backup recovery" and a "driver and application backup. But the Acer Recovery Management will run. When I click on Acer recovery management application, I get the screen of the security clearance. I click on "OK" to continue. Nothing happens. I tried several times. I also tried to run as an administrator without success. I have a 32 GB flash drive ordered. Is the flash drive must be inserted into the switch 10 for the application to run? If not, what am I doing wrong

  You must insert the USB pen to perform recovery management, either by the way, if the Acer recovery management does not work, you can use windows built-in recovery.

  http://Windows.Microsoft.com/en-us/Windows-8/create-USB-recovery-drive

• Lightroom 5.7.1 does not accept Samsung NX3300 raw photos

  Hallo. I use Lightroom 5.7.1 and scan with a Samsung NX3300.

  My problem: Lightroom does not accept Samsung's RAW photos. Error message: "the file uses a color mode unsupported. What can I do? "I already have a reset camera without result. Thank you to have an idea problem. Many greetings Greg

  I think with this camera, you may need to install the Samsung's DNG Converter. Then import the DNG files in LR.

  

• Acer Recovery Management does not load! Anyone know how I can fix this please?

  Hi - I have an Aspire E5 - 511 laptop with Windows 8.1, 64 bit.

  Although Acer Recovery Management icon shows in the Applications and open the window to allow changes to my computer, after a few blue swirls that briefly Flash on the screen and disappear more nothing happens!  What is the solution please - I do not understand why it does not load?

  I guess when I did the initial USB recovery for this laptop about 7 months ago, it did not automatically a copy of the drivers?  It is that now when I need to wipe my hard drive that I have reflected on this process and find out from one of the videos that there is an option to create a backup of drivers. I need to know I have everything backed up and available for restore, and I can count on the Acer Recovery Management to be there program to do!

  I'm very much a novice user and find it all very confusing - please help!

  as JordanB said, the recovery USB key you created was all, so no need to create a backup of drivers.

  If you want to create another USB recovery media and Acer erecovery doesn't work, you can use the USB windows media authoring tool, it's the same Acer erecovery use.

  http://Windows.Microsoft.com/en-us/Windows-8/create-USB-recovery-drive

  by the way, if your HARD drive is always okay, with all the original scores, you can reset - reinstall windows without the need to support USB. just press ALT + F10 at startup and it will start the process erecovery.

• Recovery MAnager does not - stops at Midway

  Hello

  
  

  I'm trying to restore my HP Pavaillion to the factory setting. I insert the disc of recovery manager supplied with the computer. However, he never goes from 44 percent complete. On the contrary a read error '1005 error if the problem persists, contact HP support' is displayed. (See attatched photo). How can I fix it?

  Additional information:

  The reason why I'm trying to restore my PC to factory settings, it is that is no longer able to boot. For some time I could start through the Windows 7 disc, but now I can't do same.

  Additional information:

  If it is possible to fix my computer without restoring to factory settings, that would be great I have a certain number of files it contains. The computer stopped booting all around the period I, 1) update Norton 360 and 2) installed Tablet Intuos Wacom. Notron 360 caused earlier problems with my PC (Blue Screen of Death by updating Norton 360) but I don't know if it's the cause again now. This could be the Tablet, as I played around with the settings (specifically, I changed these services automatically start Manual [Service of stylus, Tablet PC Input Service, Wacom Touch Customer Service] and I also have desselected features Windows Tablet). I did this because the Tablet has been rarely connected to the computer, but the processes that have been continuously running despite the fact that the tablet was not connected, (when we look in the Manager tasks) used a lot of memory. If you think that one of the two above (Norton or Wacom) causes, let me know and I will send you more information.

  If not for now, I guess I would say goodbye to all my files and default factory settings - IF HE WOULD ACTUALLY restore instead of give 1005 error messages.

  Thanks for any help

  

  Uncanny101 wrote: Hello, I have been unable to find the functionality you're talking about. This is the screen that appears when I press F10, select Advanced. I'm looking in the right place?

  

  Hello Uncanny101, the recovery restore partition may have been deleted. If it did, you wouldn't be able to use the F-10 or F - 11 key to access.

  You should be able to perform a new install with a Windows 7 disk, if there is no hardware failure.

  Just insert the Windows 7 in the optical drive and start the system. When you get to the place where you are asked where to install the operating system, look at the bottom of the page and you should see the partition. You should see two partitions, one of 100MBs more. Let the small partition of 100 such MB, because it contains the Windows 7 installation files. Select this option to remove the larger partition, and then create a new partition, quick format the new partition to continue.

  This should allow you to install a fresh Windows 7. You lost all the data you have added since you have the system, but because the installation failed, these data are probably already lost.

• Recovery Manager does not restore image on HP Pavilion p6227uk [Windows 7]

  Hello

  Currently, I'm trying to reformat my HP Pavilion P6227uk, running Windows 7 Home Premium 64-bit.

  I reformatted this machine once before (a couple of years) using recovery disks created by the system. I saved these same recovery discs to reformat, I try now to complete.

  So far I performed the steps in the order as I did before - place the CD1 in the drive, boot from the CD, run a disk factory reset. First time I tried, she returned with the error message almost immediately, he does not reformat (or something to that effect) with this error code: 0xe0ef0002 and instructions for "contact HP support. AT 01:00. You must be kidding.

  I tried again and got exactly the same result. Decide to leave for another day, when the support would be around, I tried to boot normally (with the disc from the drive). This time, I got a black screen with white, printed on the top left text:

  BOOTMGR is missing

  CTRL-Alt-Del to restart

  Oh good God. I rebooted and tried to get to the system recovery. Nada, BOOTMGR is still missing. I put the recovery in drive and started to Recovery Manager disk and proceeds to try every single diagnostic at my disposal. Nothing's wrong, apparently, except for not being able to start Windows. Get a bit peeved (I have a disorder that leaves me open to huge bursts of anger, this did not help), I decided to try the Factory Reset. Oddly enough, it doesn't give me an error message, but seemed to be progress in the "Factory image restore. 4% and then 8% - and it's been stuck at 8% for the last 12 hours at least. I don't particularly want to turn it off for the risk of breaking something - even if Recovery Manager seems pretty broken as it is. There is a blue arrow pointing to 'Reformat the partition of your hard disk Windows' and that's all. No button is available (except the red X), nothing seems to happen anywhere. Extremely disappointed.

  Any help would be appreciated. I'll be phoning HP support tomorrow to get answers, although I don't have a particularly good story to keep my mood level when you speak with assistants and on pending emails is not my thing either - I saved important files on an internal HARD drive before you start (disconnected the motherboard HARD drive) and the hours of waiting and hours for email support is not an option.

  Thank you in advance, from the bottom of my heart. It couldn't have come at a worse time.

  -JR

  Hi, JR:

  While I can't help you with the problem of specific recovery disk (and is probably impossible anyway), I have a solution to your dilemma...

  If you can read the Microsoft windows 7 25-character product key, you can download simple Windows 7 ISO files to burn on a DVD for the version of windows that is installed on your PC, and which is listed on the Microsoft COA sticker on your PC case.

  Burn the ISO with the option to burn the ISO on your DVD burning program and burn it at the slowest possible speed that will allow your program. This will create a bootable DVD.

  Use 25 characters on the PC product key to activate the installation.

  The key will activate a 32 or 64 bit installation.

  Then go to the support of the PC and driver page to install the drivers you need.

  Link to downloads ISO of W7 is below.

  http://www.mydigitallife.info/official-Windows-7-SP1-ISO-from-Digital-River/

  Paul

• HP 15-ac000: Recovery manager does not exist after upgrading to win 10

  Hello

  I recently bought this laptop and had a free upgrade to win 10.

  Now I found the HP Recovery Manager is missing, and I guess that all of the other HP app no longer exists.

  How can I get these dos applications?

  Thank you.

  Peter

  The link in my previous post gives instructions on how to unlock Recovery Manager.

  What you need to do is:

  1. open 'C:\Program Files (x 86) \Hewlett-Packard\Recovery Manager' in the file Explorer.

  2. right click on Rebecca.exe (recovery program) and click "copy."

  3. paste it on your desktop.

  4 unzip this download http://www.fluxbytes.com/software-releases/fileunsigner-v1-0/

  5. drag your copied version of Rebecca.exe on FileUnsigner.exe

  6. right click on Rebecca.exe on the desktop and click "copy."

  7. paste in 'C:\Program Files (x 86) \Hewlett-Packard\Recovery Manager' and say yes to replace the existing file.

  8. search "HP Recovery Manager", click on it and a prompt will come, click 'Yes' and it should open.

   

  You can repeat this for other programs that are blocked. Basically, it removes the obsolete certificate which prevents opening in Windows 10.

• Recovery Manager starts not clean for reinstall Windows 7

  I have a HP Pavilion Elite HPE-110f who is 4 years old.  Everything was going well until a few weeks he started receiving messages RAID on start-up and other things little qwerky.  Then last week Dreaded BSOD has shown.  I shut down the computer and tried to restart, but got an error message that the computer failed to start.  Then, I tried everything I could think of-startup repair, tried to start without failure, partitioned disk recovery, System Restore - nothing has worked.  I have the HP but recovery media which had as my final choice.  I tried to do a clean reinstall today records, but now the Recovery Manager will yet come.  Can someone please help me get my OS back?

  This is a result of SMART tests done on your hard drive.  It seems that your hard drive is dying and you should think about replacing, that's what means the BIOHD-8.  Retrieve all the data you can.

• eMachines Recovery Management does not burn correctly

  I burn the eMachine Recovery Management backup files and it fails on the last disc (Disc #10... I am using CD).  VERY frustrating to take three hours to burn all discs and have the last of them fail.  Me still flashes an error code: 203.  I tried to use different drives in case I had a bad.  Is not serious.  I gave up and started to repeat the entire process and the same thing... 10 disk fails.  Loss of time, energy, and disks.  Any suggestions?  Thank you.

  http://www.eMachines.com/support/

  You try to use eMachines Recovery Management process.

  There is no part of the software of Microsoft Vista.

  EMachines contact support at the above link for their collection management process...

  See you soon. Mick Murphy - Microsoft partner

• Reinstalling driver HP Recovery Manager does not

  We have recurring problems with his since 8.1 windows installation.  A way to turn that seems to be running the HP Recovery Manager tool and drivers running Applications and reinstall option.  However, we notice that it does not appear to do anything.  Whenever we run what he finds the same number of drivers and applications to reinstall with the same levels of numbers/release of version.  When we run it and install and restart everything seems fine, but the next tim we run the same drivers etc. are suggested to reinstall.

  Can anyone suggest what could be bad?

  Thanks in advance.

  Hey tasng4,

  Good to hear.

  Sometimes to communicate on a forum can be a real pain.

  Glad to see that we have understood each other and that things work as expected.

  If something happens to make me know.

• recovery management does not work

  Hi all

  I bought an "aspire e5 - 571 597 g-d".
  I can't launch the application "recovery management" to create recovery discs.

  I formatted S.O. but the problem remains.
  How to do?
  Greetings

  as JordanB said, follow this guide:

  http://Windows.Microsoft.com/en-us/Windows-8/create-USB-recovery-drive

  It will start windows recovery which is the same used by Acer but without starting the process of Acer erecovery, so you get your question.

• the Acer recovery management does not not in windows 8.1

  I just got an acer aspire e15're-551-t1mk, which seems to work ok but the only problem I have is that I can't make the recovery disks, as soon as I open acer Windows Recovery Management, I get a pop up that says allow or not, I click Yes for allow and mouse will tour a few times and then nothing the one idea I sent to acer and there answered "because I brought the laptop from pc world then take with them", thanks acer

  If I restart the laptop and press SHIFT or alt f10 cell phone asking if I want to restore the sofeware etc so that restoring little seams to work and also nothing has been installed but as I thought I would be makes records first

  help help help ran out of ideas

  OK, good to hear.

• Recovery Manager does not work

  Hello: I have PC Pavilion a6255.it desktop with windows vista family 32-bit premium; I would like to know why does not the Recovery Manager to reinstall hp photosmart essential. Thank you

  You can download HP Photo creation which replaced Photosmart Essential:

  http://www.HP.com/global/us/en/consumer/digital_photography/free/software/photo-creations.html

• Recovery Manager does not recognize a flash drive

  Well, this is my second attempt to create recovery media, initially I thought the drive was defective and returned. I would go to 8.1 but would create recovery first. Recovery creator does not recognize the cross (SanDick Cruzer 16 GB) flash drive the forums and google around and have not really found a solution. Help please? Must I resort to buying discs for this purpose? I don't see any mention of this player being Win 8 compatible.  PC is the new HP Envy 1430. THX...

  natrldsastr wrote:

  I said in my initial inquiry, I can't find any compatible 'Win 8' claim for this device. The packaging claims to be compatible by the bias of Win 7, but no mention of 8. I knew it was a problem and had checked. Regardless, this disc is useless for the recovery of the system. Thanks for your time.

  Hello! Looks like you have a couple of choices for me. Use a PNY flash. Create an image of your operating system with a third-party App or get some DVD high quality. I agree that the drive is useless for the recovery of the system. I've seen your problem before on other forums and other products. I do not have the answer.

  Dokie!

  PS Perhaps SanDisk has a?