This Mooc generates a certificate or a statement at the end of the course?

Similar Questions

• Why generate a system health report state I have no anti virus installed

  Why generate a system health report state I have no anti virus installed

  Hi Mark,

  -What antivirus is installed on your computer?

  I suggest to update the antivirus installed on your computer and check.

  Go through the steps mentioned in the Web site and check if this may help.

  Use antivirus software that Windows doesn't find

  http://Windows.Microsoft.com/en-us/Windows-Vista/use-antivirus-software-that-Windows-doesn ' t - search

  Let us know the results.

• Try to get a single site usajobs.gov to another site by clicking on their links. HOWEVER to get 'there is a problem with this Web site security certificate.

  The security certificate presented by this website was not issued by a trusted certificate

  the certificate presented by this website was issued for different address websits.

  I am applying to the website https://chart.donhr.navymil/main.aspx

  I tried to use the registered information @support.microsoft.com/kb/931850 but I do not have Windows SBS or a client server.

  I contacted HP the manufacturer of my computer - no luck, and I contacted McAfee software to see if they had any suggestions.  No luck.

  I really need apply for this job, but can't seem to get around the problems of certificate.

  Help!

  I tried to connect but nogo - either site doesn't work - or unsafe or fraudulent site, etc.

• my copy of CS4 is not allowing me to open it, whenever I have it try state that the license is no longer works and gives an error code: 6. this problem occurs on my laptop works fine my office copy [from the same CD, etc.]

  my copy of CS4 is not allowing me to open it, whenever I have it try state that the license is no longer works and gives an error code: 6. this problem occurs on my laptop works fine my office copy [from the same CD, etc.]

  Exit code: 6, Exit Code: 7 Installation error - http://helpx.adobe.com/creative-suite/kb/errors-exit-code-6-exit.html

  The problems with the Setup logs. CS5, CS5.5, CS6 - http://helpx.adobe.com/creative-suite/kb/troubleshoot-install-logs-cs5-cs5.html for more information on how to review your Setup logs

• Retrieve the State of the current session... its been like this for days now and it really slows the responsiveness of the software.

  When I opened Adode Acrobat, a grey area on the right said retrieve the State of the current session... its been like this for days now and it really slows the responsiveness of the software. How can I solve this? I paid for the Export Department in January 2014.

  If this is still the case, I would recommend uninstalling and reinstalling the drive. You should not receive this message if you are logged out.

  Best,

  Sara

• I get message "this certificate has been revoked by the CA.

  I GOT THE DIGITAL CERTIFICATE AND ENTER IN OUTLOOK EXPRESS, ALL WORKED FOR A WHILE, THEN I GOT THE ABOVE MESSENGE BUT CERTIFICATION AUTHORITY SHOWS IT AS BEING ACTIVE AND GOOD.

  Hello

  Certificates are issued with a design lifetime and expiration date explicit. A certificate may be issued for one minute, thirty years or even more. Once issued, a certificate becomes valid once validity period is reached, and it is considered valid until its expiration date. However, various circumstances may cause a certificate to become invalid before the expiry of the validity period. These circumstances include the change of name, change of association between subject and CA (for example, when an employee leaves employment with an organization) and compromise or suspected of the corresponding private key. In such circumstances, the certification authority must revoke the certificate.

  http://TechNet.Microsoft.com/en-us/library/cc700843.aspx

• The STATE of the POWER of DRIVER FAILURE by closing

  PILOT FAILURE of STATE, its says that is why my stop takes too long, it just happened after my upgrade to win 8.0 to 8.1.

  Help, thank you

  How can I fix driver power state failure in Windows 8?

  Status of power driver failure error in Blue Screen of Death (BSOD). This error mainly because of incompatible driver or inappropriate for any device that can have a computer system.

  Often, a simple restart is all that is necessary to solve the problem. If the problem persists even after the restart, the computer must be restarted in safe mode, and the problematic device driver must be uninstalled. Because Windows 8 does not allow users to press F8 or SHIFT + F8 at startup of the system to access the advanced by default start menu, administrators must activate menu of advanced boot legacy manually before to enter safe mode. Once Windows 8 computer is started in safe mode, the problematic driver can be uninstalled to solve the problem.

  After you have uninstalled the driver of the origin, its new compatible version must be installed.

  Note: The exact information of the problematic device driver can be found through the automatically generated minidump file by Windows 8 when the blue screen of death. In order to view the generated minidump file. Extension DMP, BlueScreenView application can be downloaded and run.

  How to activate the Advanced Boot Menu?

  To enable advanced legacy in Windows 8 boot menu, the instructions below must be met:

  1. Restart the computer Windows 8.
  2. Enter the BIOS setup and configure the system to boot from the CD/DVD drive.
  3. Save the settings updated the BIOS and restart the computer.
  4. Insert the bootable Microsoft Windows 8 installation DVD into the drive of optical media (CD/DVD Drive).
  5. When prompted to press any key to boot from CD or DVD, press any key to start the computer from the DVD media.
  6. In the Windows Setup box appears, click Next.
  7. On the next page, click on repair your computer.
  8. In choose an options screen, click on troubleshooting.
  9. On the troubleshooting screen, click Advanced options.
  10. On the screen advanced options, click command prompt.
  11. The open command line interface (CLI), type C:, and then press ENTER.
  12. On C: prompt, type BCDEDIT/SET {DEFAULT} BOOTMENUPOLICY LEGACY command and press ENTER to activate the advanced legacy boot menu.

      

  13. Once the command executed successfully, type the EXIT command to close the command line interface.
  14. Back in the page choose an options screen, click on continue to restart the computer Windows 8.
  15. Eject Windows 8 installation of the complete optical when media player DVD.
  • How to Fix driver Power State failure error?

    In order to correct the error of the State of drive failure in Windows 8, you must restart the computer in safe mode, and the pilot of the origin must be uninstalled. Step by step instructions below must be followed to get the job done:

  1. When the computer restarts, press the F8 key constantly to display the advanced boot Optionsscreen.
  2. On the Advanced Boot Options screen, select Safe Mode by pressing arrow and press Enterto start Windows 8 the computer safe mode.

     

  3. Once started in safe mode, log Windows 8 computer with the administrator account.
  4. Click Desktop tiles of the splash screen to go to the screen.
  5. Once on the screen, mouse to the bottom right of the window.
  6. Among the options, click settings.
  7. In the settings pane, click Control Panel.
  8. In the open everything in the Control Panel window, click Device Manager.
  9. On the Device Manager window, expand the category of the device that has some problems.
  10. Once developed, right click on the driver of the problematic device which should be uninstalled.
  11. On the shortcut menu that appears, click on uninstall to remove the selected driver.

      

  12. Box to confirm device uninstall, click OK to confirm uninstalling the problematic device driver.
  13. Wait until the selected driver is uninstalled, and then restart the computer Windows 8 normally.   Checkurtech

• Lenovo, statements about the Adware/Malware/MITM Superfish

  I was frankly appalled to learn Superfish, which I think is installed on my Yoga 3 Pro bought in November.  If including this kind of software without the explicit consent and informed of the users is not crime, it should be.

  I have read the statement of Lenovo and saw this:

  «Users are given a choice to use the product or not.»

  Can someone explain to me what this choice looked like when presented to users?  I can't imagine in my wildest dreams consent to any kind of adware, and I don't remember be presented with 'choice' of wheter to use this software.

  In addition, given that the Superfish pre-installed root certificate has been hacked and is easily usable by any pirate for a man-in-the-middle attack, what measures are taken to revoke the certificate and purge completely (as well as the Superfish software) of all infected machines?

  burndive,

  The Yoga 3 Pro is not on the list of affected systems.

  Official list of the systems affected here:

  http://support.Lenovo.com/us/en/product_security/SUPERFISH

  Instructions to uninstall:

  http://support.Lenovo.com/us/en/product_security/superfish_uninstall

  Z.

• State of the coast customer Pass to the modal dialog box

  Hi guys,.

  I would like to open a modal dialog box and change the value of a select list of the modal dialog box. I have to be able to switch the status of the customer value using apex.item("P1_DEPTNO").getValue (). The declarative method to use modal dialog boxes is to use a button and a link to the page, where everything is taken care for us, the value, the checksum for the protection of session state, etc..

  But sometimes we need to go on the side of current customer State the modal page, for example, while we are in the middle of creating a new row in a table... and the value is not yet stored in the database.

  So, how can we do this? By the way the page in progress and also variables to generate the control are appropriate for the items to be passed.

  Since there is no dynamic action to do this directly, I tried to attach a dynamic action to a button and run javascript to open the dialog box (https://docs.oracle.com/cd/E59726_01/doc.50/e39149/javascript_api.htm#AEAPI29504):

  var l_url="f?p="+$v("pFlowId")+":2:"+$v("pInstance")+"::::P2_DEPTNO:"+apex.item("P1_DEPTNO").getValue();
  alert (l_url);
  
  
  apex.navigation.dialog(l_url, {
      title:'About',
      height:'480',
      width:'800',
      maxWidth:'1200',
      modal:true,
      resizable:false },
      '',
      $('#EMP_REPORT'));
    
  
  
  

  Unfortunately, I get an error internal an error:

  2 request 157 dialog page cannot be returned successfully. If make sure that the template in use on page 2 is the type of model 'Page of dialogue', with the JavaScript dialog initialization appropriate, closing the dialog and dialog box cancel the code defined.

  I do not understand the error message since I use the theme 42 and the handling of the ordinary modal dialog box works.

  Would appreciate advice.

  See you soon,.

  ~ Dietmar.

  Hi Dietmar,

  you're always coming to these requirements of fancy...

  The following has worked for me in Chrome. But to test if it works in any browser.

  1. Describe your button as usual with a link to the page of the dialog box
  2. For example to set items , specify P7_CUSTOMER_ID as the name and ~ CUSTOMER_ID ~ as value. ~ CUSTOMER_ID ~ is our placeholder that will NOT get replaced by APEX. We use it in our JavaScript code.
  3. Set the static ID of your my_button button so that we are able to access in JavaScript
  4. In the run when the Page loads page level attribute, add something like

     var myButton$ = $( "#my_button" );
     myButton$.attr( "onclick", myButton$.attr( "onclick" ).replace( "~CUSTOMER_ID~", "' + $v( 'P2_CUSTOMER_ID' ) + '" ));
     

  The JS code above will replace your reserved space and turn the link into something like

  javascript:apex.navigation.dialog('f?p=73380:7:109940056598048::NO:RP:P7_CUSTOMER_ID:' + $v( 'P2_CUSTOMER_ID' ) + '\u0026p_dialog_cs=QxixrjW-ZGmCMXTNBPlITtOG_X3aShXqYmmaugetfJ8rYKRHHpJpeskKbIEO3qpqVIkX-dWYaqbZ0_AGq3ASTg',{title:'Sample Database Application - Customer Details',height:'480',width:'660',maxWidth:'1000',modal:true,dialog:null},'t-Dialog--wizard',$('#my_button'));
  

  Obviously, you will not be able to use the Protection of the Session State for the P7_CUSTOMER_ID dialog page item, so you set the page of dialogue level attribute Access Protection Page to the Unrestricted.

  The amount of control that see you in the URL is really just to protect the dialog box itself.

  Concerning

  Patrick

• Case statement in the SQL Query prompt dashboard

  Hi Experts,

  I use the following case statement to generate default values in the prompt dashboard based on a condition (the other guest-generated values). Below are two of the query I've tried and the syntax error. I tried all the possibilities (like giving apostrophes, double quotes, don't quote not etc.), but could not understand the question. Don't know what exactly I'm missing here.

  Query 1:

  SELECT

  CASE

  WHEN @{PRType} = monthly THEN 'Participant pay '. "" Amount of PayRate "="15000"

  WHEN @{PRType} = daily THEN 'Participant pay '. "" Amount of PayRate "="650"

  WHEN @{PRType} = hourly THEN 'Participant pay '. "" Amount of PayRate "="1"

  ELSE ' 0'

  END

  OF 'PA-Participant pay. '

  Query 2:

  SELECT

  CASE

  WHEN @{PRType} = monthly THEN "15000"

  WHEN @{PRType} = daily THEN "650"

  @{PRType} = schedule THEN '1'

  ELSE ' 0'

  END

  OF 'PA-Participant pay. '

  This is the query that is generated in the log with error message file.

  1 log message:

  
  

  SELECT CASE WHEN Hourly = Monthly THEN "Participant Payroll"."Payrate Amount" = '15000' WHEN Hourly = Daily THEN "Participant Payroll"."Payrate Amount" = '650' WHEN Hourly = Hourly THEN "Participant Payroll"."Payrate Amount" = '1' ELSE '0' END FROM "PA-Participant Payroll"

  State: HY000. Code: 10058. [NQODBC] [SQL_STATE: HY000] [nQSError: 10058] A general error occurred. [nQSError: 43113] The message returned by OBIS. [nQSError: 27002] Near <>=: Syntax error [nQSError: 26012]. (HY000)

  
  

  
  

  Comment 2:
  

  ;CASE WHEN To_Char (Hourly) = 'Hourly' THEN 1 ELSE 0 END 

  State: HY000. Code: 10058. [NQODBC] [SQL_STATE: HY000] [nQSError: 10058] A general error occurred. [nQSError: 43113] The message returned by OBIS. [nQSError: 27002] Near <>(): syntax error [nQSError: 26012]. (HY000)

  Sorry, I wasn't clear... you must always put this CASE statement in a valid SQL SELECT statement.

  SELECT

  CASE

  When ' @{PRType}' = 'Monthly' THEN '15000'

  When ' @{PRType}' = 'Daily' THEN '650'

  ELSE '0' END

  OF 'PA-Participant pay. '

• ERROR: New-Snapshot (the operation is not valid due to the current state of the object)

  Hello guys!

  I've been googlin everywhere, but impossible to find a solution to my problem. I hope that one of you, qualified people can point me in the right direction :)

  I created a powerCLI script to take a snapshot of our most important servers before we do our weekly maintenance. The idea to run the script as regular powershell script and then have

  1. Add snap-ins powercli and connect to virtualcenter servers
  2. ask the VC servers to virtual machines in a perticular folder
  3. Loop foreach on these servers to create a snapshot with the name $snapshotname

  Currently, I just do it turn on a test folder that I created in vSphere that contains 3 test VMs:

  • Testmagne1 - normal operation
  • Testmagne2 - I renamed the folder for this virtual machine in the data store to generate an error.
  • testmagne3 - normal operation

  Since the servers (not the test servers, but good ones) is the most important servers in our environment, I want to be able to catch exceptions and errors when I run this script. I do this with the Try - Catch - Finally works.

  The strange thing is:

  The release of Powershell/PowerCLI is different from the output in VirtualCenter (!)

  In virtualcenter, the output is as follows

  • Testmagne1 - snapshot is created successfully - as expected
  • Testmagne2 - the snapshot creation fails because it cannot find the files .vmx - as expected
  • Testmagne3 - snapshot is created successfully - as expected

  However, the exit in powercli is slightly different:

  • Testmagne1 - snapshot is created successfully - as expected
  • Testmagne2 - creation of the snapshot fails because it cannot find the files .vmx - as expected
  • Testmagne3 - snapshot fails with the error message: operation is not valid due to the current state of the object - huh?

  
  

  Apparently once the first error is generated all succeeding VMs get error "the operation is not valid due to the current state of the object"

  
  

  I've been pulling trying to figure this problem on my hair, but I'm not getting anywhere

  
  

  Here is some additional information:

  1. the Script (abridged version of it. It generates the same error):

  -STARTUP SCRIPT-

  $ErrorActionPreference = "stop".

  Add-PSSnapin VMware.VimAutomation.Vds, VMware.VimAutomation.Core | Out-Null

  SE connect-VIServer VIRTUALCENTER1, VIRTUALCENTER2 | Out-Null # Sensored VirtualCenter names

  $servers = get-VM-location 'testfolder '.

  $snapshotname = 'Testsnapshot '.

  $verifycreatesnapshot = Read-Host "you are about to create snapshots for $servers. Do you want to continue? o/n.

  If ($verifycreatesnapshot - eq 'y') {}

  Write-Host "snapshots of creation...". »

  {ForEach ($i in $servers)

  Write-Host "instant Creation for $i."

  Try {new-Snapshot - VM $i - name $snapshotname |} Out-Null}

  Catch {$_.exception | select *;} Write-Host "Unable to create the snapshot for $i" ;}

  }

  Write-Host "command finished.

  }

  else {Write-Host "Operation canceled by user"}

  Read-Host "end of the script. Press ENTER to close. "

  ------------------ END SCRIPT -------------------

  2. the PowerCli error messages:

  Error for Testmagne 2 (as expected):

  File: [DATASTORE114] testmagne2/testmagne2.vmx

  DynamicType:

  DynamicPropertyInternal:

  FaultCause:

  FaultMessage:

  ErrorId: Client20_TaskServiceImpl_CheckServerSideTaskUpdates_O

  perationFailed

  ErrorCategory: NotSpecified

  TargetObject:

  RecommendedAction:

  SessionId:

  ConnectionId: /VIServer = SENSORED: 443 /

  Severity: error

  Message: 31/10/2013-10:52:16 New-Snapshot the operat

  ion for the entity 'testmagne2' failed with the follo

  the wing's message: "file [DATASTORE114] testmagne2/testmagn".

  E2.vmx was not found.

  Data: {ParameterValues}

  InnerException: VMware.Vim.VimException: exploitation of the entity

  'testmagne2' failed with the following message: 'thread '.

  testmagne2/testmagne2.vmx e [DATASTORE114] was not crazy

  ND ".

  TargetSite:

  StackTrace:

  HelpLink:

  Source:

  Failed to create the snapshot for testmagne2

  Error for testmagne3:

  Creation of snapshot for testmagne3

  ErrorId: Core_BaseCmdlet_UnknownError

  ErrorCategory: NotSpecified

  TargetObject:

  RecommendedAction: An error occurred when executing command: new-Snapshot. I have check

  f exception for more details.

  SessionId:

  Login ID:

  Severity: error

  Message: 31/10/2013-10:52:17 instant New-capture operation is not

  valid due to the current state of the object.

  Data: {ParameterValues}

  InnerException : System.InvalidOperationException: operation is not valid from

  e to the current state of the object.

  at VMware.VimAutomation.ViCore.Impl.V1.Task.ViCoreTaskCo

  reServiceProviderImpl.BeginTaskCompletionPoll (list 1 taskLi

  St)

  at VMware.VimAutomation.Sdk.Impl.V1.Task.CoreTaskService

  Impl.WaitForTask (IEnumerable 1 taskList, ProgressCallback p

  rogressCallback)

  at VMware.VimAutomation.Sdk.Util10Ps.BaseCmdlet.BaseCmdl

  and. EndProcessingErrorHandled()

  at VMware.VimAutomation.ViCore.Util10Ps.BaseCmdlet.BaseC

  mdlet. EndProcessingErrorHandled()

  TargetSite: Sub ThrowTerminatingError (System.Management.Automation.Err

  orRecord)

  StackTrace: At System.Management.Automation.MshCommandRuntime.ThrowT

  erminatingError (ErrorRecord errorRecord)

  HelpLink:

  Source: System.Management.Automation

  Failed to create the snapshot for testmagne3

  3 PowerCLI version

  PowerCLI Version

  ----------------

  VMware vSphere PowerCLI 5.5 Release 1 build 1295336

  ---------------

  Versions of the snap

  ---------------

  VMWare AutoDeploy PowerCLI component 5.5 build 1262826

  VMWare ImageBuilder PowerCLI component 5.5 build 1262826

  License of VMware PowerCLI component 5.5 build 1265954

  VDS's VMware PowerCLI component 5.5 build 1295334

  VMware vSphere PowerCLI component 5.5 build 1295334

  
  

  4 VirtualCenter version

  VMware vCenter Server Version 5.0.0 Build 913577

  vSphere Client Version 5.0.0 Build 913577

  Hosts: VMware ESXi 5.0.0 Build 914586

  If you need additional information, let me know

  Any help is greatly appreciated

  Thank you!

  -Loincloth

  
  

  
  

  Definition - ErrorAction Stop locally on the cmdlet will not solve the problem. We have found and solved the problem and the fix will be available in the next version. Until then, you can use the $error variable to detect whether the cmdlet was successful or not. You can clear the $error variable before calling the cmdlet and check if it's still empty after the call.

• Creating a self signed certificate - how do you define the "storepass.

  Hi, I am trying to use ADT to create an AIR 2.7 file, but this is the first time I used the command line tool to build an and have problems to understand the process of signing.

  I can generate a keystore cert.p12 from the flash IDE, and it requires a password to the file (-storepass)

  I can also use ADT to create a certificate self-signed from the command line, you can specify here the - keystore (location cert) and - keypass (password for the key in the store)

  I can't find a way to generate a certificate self-signed, where you can specify the two passwords, one for the store (-storepass) and one for the key (-keypass).

  It is a problem because when I go to my file using ADT AIR package, it takes two passwords - storepass and - keypass seized may publish.

  Is anyone know how generate a .p12 self-signed certificate and have a control on the two keys...?

  I spent hours playing and research now so maybe the wrong end of the stick, could do with some help get beyond this issue.

  Thank you

  Sean

  There is that a single password is mandatory in package for ipa that until now I know

  Example of order:

  C:\AdobeAIRSDK\bin\adt.bat-Paquet - target the ipa-test - stores pkcs12 - keystore [KEYFILE] .p12 - storepassKEY PASSWORD] - set service-profile [FILE of AVAILABLE MOBILE] .mobileprovision [NAME of the IPA] .ipa [NAME of THE XML FILE] .xml [NAME of FILE SWF] .swf Icon_29.png Icon_48.png Icon_57.png Icon_72.png default Icon_512.png - Landscape.png default - default Portrait.png - PortraitUpsideDown.png default - default PortraitLandscapeLeft.png - PortraitLandscapeRight.png

• Current state of the iPhone folded 6 more question

  Hi all.  I'm definitely someone Android, but my two sons are big fans of Apple.  My youngest son who just turned 11 years old has an iPhone 6 Plus.  For a boy his age, he deals with amazing care.

  It has become recently folded, which often causes a white band at the top of the screen and there is a noticeable shift from the hole for the sim card.  How the elbow he got a mystery.

  I did my research, which seems to suggest that it is the result of a design flaw, but that's a guess on my part. Her phone is out of warranty, and as far as I can tell, his only real option Apple is a $329 out of warranty replacement.

  I realize that the people who devote their time and information here do not speak for Apple, but I thought that the perhaps some might have had a recent experience with Apple about it.  It would be useful if someone could give me an idea of their understanding of how Apple takes care of this for phones that are out of warranty.  I don't know if it makes sense to go to the Apple store and see what they will do or if it is a problem with a clear answer.

  I also found devices that supposedly will fix the problem and I have seen some videos of supposed solutions.  If anyone has some tips on the State of the art regarding this topic, I'd appreciate any help.

  Thanks in advance for any help.  On occasion, I sought help here in the past, and I've always been impressed that so many people volunteer their help to people like me who would be lost without it.

  Hello

  I suggest you contact Apple Support (mail service may be available) or make a Genius Bar reservation to establish your repair options available via Apple, including the time and cost.

  • Contact - Support official Apple
  • https://Twitter.com/applesupport
  • http://www.Apple.com/retail/Geniusbar/

• Hello. I want to change my country of the Jamaica, to the United States but the United States offers none as payment option. I just want to try the new Pokémon go app that is not available in Jamaica. Help, please

  Hello. I want to change my country of the Jamaica, to the United States but the United States offers none as payment option. I just want to try the new Pokémon go app that is not available in Jamaica. Help, please

  Unless you are in the USA, expect it to be available in Jamaica. People can not download content from iTunes Store from another country; This is why it is not an option for you.

  (143448)

• I have Firefox 8.0.1 and since the update to it, some sites, I need to go so that Firefox will not accept certificates which is accepted in the previous version. I can not get the permanent exception and must uncheck permanent and do every time.

  I have Firefox 8.0.1 and since the update to it, some sites, I need to go so that Firefox will not accept certificates which is accepted in the previous version. I can not get the permanent exception and must uncheck permanent

  You can use this button to go to the Firefox profile folder:

  • Help > troubleshooting information > profile directory: opens showing the file

  It is not usually necessary to create an exception for the certificates.
  
  Possible causes are that a server does not send the full (intermediate) certificate chain or self signed certificates.