This RAM Kingston works on my Dell E520?

Similar Questions

• Buggy BIOS reporting wrong OS RAM - whatever works for the normal case... Should I buy a DELL next time?

  I know that this thread needs by Dell support, or maybe I'll get the standard answer E310 motherboard supports only 2 GB (official number).   But I hope that there are other materials here lovers like me, who have found a solution to this problem...

  Are there any success stories of the E310 Bios reports 4 GB (all) OS kernel?  I'm under A03 version BIOS because according to Dell documentation, A04 upgrade will make me only ability to run more high speed CPU, no RAM upgrades.  What a bummer... When you upgrade CPU, one would expect that users will try RAM upgrade first, and where the team BIOS should have addressed this issue first before giving the possibility of upgrade processors! Here is my account of many hours spent on the research on the internet in detail:

  Resurrect an old Dell Dimension 3100 erasure of the Windows XP with Ubuntu (Xubuntu specifically, but it could have been Windows 64-bit as well - is not serious). Version of 64-bit installed Ubuntu LTS 14.04.3. This machine has a Hyper threading, 64-bit capable Pentium 4 chipset from Intel 915GV (who may be able to max 8 GB of RAM, according to Intel). Updated from existing to 1 GB of RAM Kingston with purchase of 2 sticks of 2 GB Samsung (same model). I tried all possible combinations of 3 all the sticks of memory, as well as tests them alone on this machine. 4 GB or 3 GB, depending on the combination of the sticks, in that I put the BIOS reports. All the sticks of memory are good, and they run the machine individually.

  The problem is that I see conflicting reports of some commands to command line and of applications such as "sysinfo" or "hardinfo". Newspapers of observed point syslog to 3.2 GB kernel is seen by kernel - not the whole 4 GB which is seen by the BIOS, or other command line tools. I'm suspecting that this BIOS is buggy and not all address space gives to the kernel. Here are links showing the conflicting reports:

  1. This is what kernel sees in syslog: http://paste.ubuntu.com/12404466/
  2. Command line indicating the presence of 4 GB: http://paste.ubuntu.com/12405884/
  3. Out of "hardinfo" application: http://paste.ubuntu.com/12405897/

  I am aware that this machine was initially sold to me with 2 GB RAM max as official data. But, after seeing internet reports of others who have made 4GB and research in data of intel 915GV chipset, I think of this maybe a buggy BIOS that does not give the final of 1 GB to the kernel.

  Hi Rdunnill,

  I was informed that the cause of the loss of RAM in BIOS is due to problem 'PCI-hole', which are present in older systems.  Essentially, a lot of memory RAM is simply lost and not used by the hardware, because of this problem and the OS will get to use only about 3. DBM for the moment, it is not yet clear to me if the space occupied by the device drivers is included in the / 3GB or excluded.  So far, I know at least the part of (if not all) video memory is NOT included in the figures presented by operating system.  Other dependants of pilot data maybe OS and I am not deeply knowledgeable about the Ubuntu/Debian OS which I am now running.  So the answer to your question above is that you will see on 1 GB loss once again, if you are upgrading to 8 GB - usable RAM would be about 7 GB.  Can be an overdose, considering the price of a new machine vs RAM these days.

  I read your response (during my research) in the en.community.dell.com/support-forums/desktop/f/3514/t/19306285 thread, which would lead others to believe that all 4 GB of usable RAM.  You can change this answer here.

  You run BIOS A04, but I have not upgraded to A03 because I see that the upgrade will do anything to the question of memory (but only gives superior CPU option, which I didn't need).   Upgrading from 2.8 to 3.4 GHz CPU BIOS would gain a little speed, but I do not run CPU intensive tasks on this machine.

• 15 - f215dx: 16 GB of ram will work for laptop HP 15-f215dx

  work 16 GB of ram for computer HP laptop 15-f215dx here is the link of ram I want to buy this laptop Kingston HyperX Impact black 16GB (2x8GB) Kit 1600 MHz DDR3L CL9 SODIMM laptop memory (HX316LS9IBK2/16) 1.35v https://www.amazon.com/dp/B00KQCOV5C/ref=cm_sw_r_other_awd_8W02wb1WB1D17

  Refornm

  Hello;
  
  Let me welcome you on the HP forums!
  
  I read your post on adding RAM to your laptop and wanted to help.

  Unfortunately, the max RAM it can handle is 8 GB.
  
  Good luck
  
  I'm a volunteer and I do not work for, or represent, HP.
  ========================================================================
  If you feel that my suggestions helped you, please click on the thumbs-up symbol to say thank you!
  
  If they helped to solve your problem, please click 'Accept as Solution' to help others find similar information.

• Will be my Compaq 620 Support this RAM?

  Hi, I just bought a computer laptop HP Compaq 620 opportunity and I was wondering if it would support this ram.

  Ram Kingston card

  Thank you

  Greg

  * Hope this helps *.
  * Click on the laurels on the left if you think this helps *.
  Click on accept as solution if it solves your problem *.

  Hi, Greg:

  No, this memory will not work.

  It is desktop only.

  This is what you need:

  http://www.Newegg.com/product/product.aspx?item=N82E16820139481

  or this:

  http://www.Newegg.com/product/product.aspx?item=N82E16820231294

  Paul

• RAM Kingston IBM ThinkCenter M52 problem (8113)

  I just bought a new RAM to my computer and it does not work. It's a Kingston DIMM DDR2 1024Mo (1 GB 2Rx8-5300U-555-12). The computer does not seem to recognize this RAM but it fits perfectly into the slot.

  Did some research on this problem, I found that each motherboard takes support only a certain range of types of memory in certain combinations. However, he went to the shop with the original RAM and he showed to the saleswoman and that's what I get for replacement.

  Can indicate you where I can check what kind of RAM your motherboard accepts? Or in the case where this is taken in charge, how can I install?

  Hello people! I solved the problem. Main problem is that IBM ThinkCenter M52 (8113) Bios does not configure the frequency of the RAM, so it must be PC-4200, 533 MHz instead of PC-5300 (667 MHz).

• MacBook Pro (retina, early 2013) will work well with Dell P2715Q monitor?

  MacBook Pro (retina, early 2013) will work well with Dell P2715Q monitor?

  Doesn't look like 4K is a good option.

  /macbook-pro-retina-display-how-to-manually-switch-http://www.EveryMac.com/systems/Apple/Macbook_pro/MacBook-Pro-retina-display-FAQ

  Graphics.html #extdisplays

  Built-in display:

  15.4 "Widescreen

  Native resolution:

  2880 x 1800

  Details:

  This model has a screen 15,4 "color widescreen LED backlit with IPS technology with a 2880 in native resolution from 1800 to 220 DPI (178 degrees viewing angle). It also supports of the resolutions on the scale of 1920 by 1200, 1680 by 1050, 1280 by 800 and 1024 by 640. See also: how can you 'strength' or 'hack' the Retina Display MacBook Pro models running at the native resolution or otherwise more on screen that adapt default?

  2 screen support:

  Double/mirror *.

  2nd Max Resolution:

  2560 x 1600 (x 2 *)

  Details:

  * This model supports a simultaneous maximum resolution up to 2560 x 1600 on two external displays via Thunderbolt. Alternatively, it can support a single screen up to 2560 x 1600 per Thunderbolt and one display up to 1920 x 1200 through HDMI. Although it can theoretically supply all the three external displays, such as confirmed by a useful player, it runs too hot with three connected screens.

  http://www.EveryMac.com/systems/Apple/Macbook_pro/specs/MacBook-Pro-core-I7-2.7-15-early-2013-retina-display-specs.html

  Although I think I read some hacks to make 4 K @ 30 fps.

• New RAM not working not not on iMac 2010

  Hello

  I have a 21.5 ' mid year 2010 i3 iMac, and, after all this time, it was time to upgrade the RAM.

  I bought 2 x 4 GB Patriot SODIMM PC3 - 10600 1333 MHz 204-pin, by following the instructions in the Web page of Apple memory upgrade (install memory in an iMac - Apple Support).: 4 GB RAM SO-DIMM memory DDR3 SDRAM 1333 MHz. I installed it according to job with factory 2x2gb RAM Samsung sticks. After a reboot, everything worked beautifully for about 6 minutes. The identified computer sticks again and showed me a full 12 GB available. Which was great, since Yosemite + a few browser windows and Spotify only lasts up to 3GB. I have enough to spare. However, it restarted and again and again and again.

  I decided to test only the new RAM and started with the combination of Patriot 8 GB. It froze on reboot and fully started once, but it restarted less than 2 minutes later.

  Result: now I'm back to the original combination of 2x2gb. Always deal with the lack of memory and without understanding what's wrong with the new RAM I bought at Fry's. What about compatibility? Is there an another specification? Of course, I know, there may be a malfunction of hardware, but I would like to address this issue before making another run to the store and risking another model or brand.

  For reference: I've tried it before, but because of the lack of information from the seller, I was conquered by a stick of RAM 1x8GB, which is not supported by my model. So I replaced it with the 2 in question.

  Thanks for any help.

  It is generally recommended to stick with quality RAM to buy from a seller that tests and ensures their RAM to work with Macs - the two most recommended are OWC (macsales.com) and Crucial. They both offer helps you determine which RAM you need and offer the lifetime warranty.

  http://eShop.MacSales.com/shop/memory/iMac/2010/DDR3_21.5_27

  That should be your - sure.

  I'll be back on the RAM for a refund.

• My MacBook Pro suddenly becomes very slow, accepting orders very slow how to check if the ram is working properly

  My MacBook Pro suddenly becomes very slow, accepting orders very slow how to check if the ram is working properly

  You can try this download.   Etrecheck.   https://etrecheck.com/#about

  Then publish the report as a reply in this thread.

  It will allow us to review your system without disclosing a private matter.

• Is - this RAM is compatible with the IdeaPad Z575?

  Yesterday afternoon, I purchased a Lenovo IdeaPad Z575 for $499.00 from this link: [url]http://www.newegg.com/Product/Product.aspx?Item=N82E16834246328 [url]

  Obviously, it didn't come in the mail again. I'm looking to upgrade the RAM in the laptop. It comes with 6 GB of RAM, a 4 GB stick, and a 2 GB key. The problem is, I don't really know what kind of RAM is in the computer. I'm looking to replace the 2 GB key with a second stick of 4 GB.

  Uses the type of the laptop RAM is ddr3 1333 mhz pc3-10600, without parity, capable channel, 2 dimm 204 sockets so pin RAM.

  My question is whether or not this RAM is compatible with the laptop: [url]http://www.amazon.com/Samsung-Electronics-Extreme-MV-3T4G3-US/dp/B00591ZYX8 [url]

  In addition, if there is a better option for the RAM for this laptop, I would like to know.

  Yes this ram works. also, if you ever want to check compatibility you should visit crucial.com is an excellent reference on several memory upgrades.

• Installed SP3 on a Dell E520, now problems...

  Friends, I have a Dell E520 is my old computer. I've been putting it back for a person to use their laptop is under repair. I no longer had an effective anti-virus program and went to download MS Security Essentials. Was advised that I had to install SP3; It downloaded and installed very well and then told me to restart the computer. Stopped and re-started; ACHI BIOS says "invalid configuration information. I went into Setup and turned floppy on off (another view) and discount at zero hours, etc. POST Tester gives two beeps and 20 code. After I went through Setup, Windows support, shows welcome, then watch my wallpaper with no taskbar or icons and a notice ' settings custom-installation of the custom settings for: Internet Explorer 6. and that's where he stays. the keys are insensitive, although the mouse works. Anyone have any ideas on what I might face or able to do?  any help is greatly appreciated...

  by "keys do not respond" do you mean that nothing happens when you press ctrl + alt + del? Windows that sometimes when you set up a new account. Maybe he didn't do prior to service pack 3. If you leave it alone for a while, he should complete and never show again

• Reference Dell E520, XP, SD Teac & if SATA controller - blue screen card controller

  I have a Dell E520 running Win - XP (SP3), with Teac multicard controller (SD, etc.) and the disk sata PCI if controller and as soon as I copy data from SATA drive on map uSD I get blue screen message "NMI: check / memory parity error parity."

  The copy starts OK, can copy a few tens or hundreds of MB or some Go, but eventually the locks upwards with a blue screen.

  Memory test OK, update, firmware TEAC updated drivers. Tried several cards of different sizes from 8 uSD to 32 GB. Help, please, anyone?

  AHA! The disc is indeed the problem - gives blue screen simply check index, despite the fact that the disk was giving all appearances to work properly as a repository of lots of large files!

  Thanks a lot for your advice, Diana.

• RAM has worked in a T30 but not another

  I have 2 sticks of 1 GB of RAM: DDR 333, FDMHGO - 04032T

  This RAM worked well in a portable T30 2366-85U

  I put the same RAM in a laptop of 2366-KU1 T30 and it does not - in a memory slot. The BIOS is 1IET71WW (2.10) 16/06/2006, which I think is the latest BIOS for this laptop. 2366-85U cell phone no longer works, I dropped something on the keyboard and who killed the laptop, so I can't check for the version of the BIOS.

  Is there something I can do to get two sticks of 1 GB of RAM in the laptop 2366-KU1?

  You are not sure if the RAM may be damaged, but could it have been damaged when the other laptop is dead?

  The contacts on the RAM were dirty. I cleaned the with an eraser and the T30 see now the 2 GB of RAM.

• How to solve this error "the game met a fatal DirectX issue while trying to start. Try a different screen resolution or bit depth. If this does not work, try new video drivers. »

  Hi all

  I get the following error every time I try and start Asherons call on a new Dell Latitude E5510 laptop.

  The game has encountered a fatal DirectX problem trying to start.
  Try a different screen resolution or bit depth. If this does not work, try new video drivers.

  This error occurs just after clicking the world to enter.

  • I have a fresh install of Win7 64 bit (entirely the window update)
  • The latest Intel HD - v8.15.10.2622 01/10/2012 graphic card driver.
  • A sweet DX 9 and DXDiag and 11 installation reports no errors.

  I lowered res video and depth of color, but without result.

  Digitized internet and found others with the issue but no resolution, I could see.

  Anyone have any ideas/suggestions?

  I love a solution restored for the following driver and the problem resolved.

  V8.15.10.2599 21/10/2011

• Not me works el sonido del ordenador

  not me works el sonido del ordenador

  Hello

  This forum is only for the English language - use the forum for your language, please.

  (este foro're solo para el idioma Inglés - usar el foro used knew idioma, thanks.)

  Here is the link to your forum (Aqui esta el enlace para su foro):

  http://answers.Microsoft.com/es-ES/Windows/Forum

  LC

• Reference Dell E520

  I have a Dell E520 and I'll install a Q6600 processor

  It will work graphic card XFX NVIDIA GeForce 8600 GTS 256 MB GDDR3 inside PVT84GUDF3?

  I now have a chip put in G965

  I'm not going to play games, but I don't have a Flight Simulator

  Thanks for any help!

  If you have any suggestions, please let me know!

  I put the Q6600 processor inside.  I paid $12.00 for the processor on ebay.

  Windows side went from 4.6 to 7.1

  The E520 runs great

  Thanks for the help!