RAM Kingston IBM ThinkCenter M52 problem (8113)

Similar Questions

• Need to RAM Kingston for Satellite A100-796

  Hello

  I'm looking for the right RAM Kingston for my laptop, Satellite A100-796. In the Support Center, I was unable to find anything for my model. It seems unexistent. If someone could help

  Thank you

  Have you ever heard of an invention called; Google? ;)

  http://www.orcalogic.co.UK/ASP/ProdType.asp?ProdType=34273&ft=m&St=3

  Something else?

• X 230 RAM Kingston problem

  Hi all

  I got a 230 X with 4 GB 1Rx8 PC3 - 12800 S-11-12-B4 installed memory. I tried to improve it with two sticks of memory Kingston KVR1066D3S7 / 4G 1, 5V.

  Unfortunatelly after installing new sticks of memory (combinations do not matter) my laptop does not light. After pressing the button there is just a flash and the BIOS will not start.

  Everything is back to normal after the restoration of the previous configuration of the RAM.

  Is there something wrong with my memory sticks or is it a kind of bior question or maybe something else?

  lead_org,

  your words about Kingston' and Corsair' its a little strange RAM. I have another opinion and skills with the help of RAM of these sellers, including Lenovo systems.

  I think that jarosz issiue is the frequency of the RAM, 1066 mhz is too small - officially IvyBridge supports the memory type DDR3/L-1333/1600.

• Driver DVD-RAM on Satellite A110-149 problem

  I recently received my copy of Express Upgrade to Windows Vista and I installed it as described in the user guide.

  The first time Windows Vista ran normally and I had no problem with my DVD-RAM. But then, after having upgraded from windows it asked me to reboot. When I rebooted my computer Windows Vista does not recognize the DVD-RAM driver.

  I searched the Web from Toshiba site, this driver but I couldn't find it. I just find drivers Windows XP, which could not be installed.

  Do you have anyone had the same problem, or knows where I can get this driver?

  My laptop is a Satellite A110 - 149 (PSAB6E) and the DVD-RAM is a CARPET * a DVD-RAM UJ - 841S

  Hello

  usually, a DVD-RAM needs no driver, it must be recognized automatically. Have you ever tried to remove the drive in system properties and restart the system?

  Windows should install correctly after that. If this isn't the case, please make a comment.

  Welcome them

• RAM Kingston for Y500

  http://www.Kingston.com/datasheets/KHX16LS9P1K2_16.PDF

  Is Y500 supports PnP?

  to simplify things, comparing the 2 sticks of memory living of similar size, but one is a ddr3 1333 mhz, and the other is a 1600 mhz ddr3. both can contain commands to the same size, but with faster clock able to process more quickly speed commands. Some people want to ram overclocking so that you can get a faster treatment, which is where a good stick of ram will make sense. Aries will need good material to manage higher clock speeds or even a tension higher and, subsequently, higher operating temperatures. That's the quality expensive Rams comes it.

  in the case of the y500 and bios owner to lock the system memory clock speeds, there is little interest to get the RAM of high quality since they should work correctly as specified. you do not overclock simply because you can't.

• IBM T30 Speedstep problems

  Heyo

  I have an IBM T30 2366-85U. I can't run at full speed during the use of current alternative. It comes down to 1 .2GHz any options choose in bios or power options in Control Panel. Under windows XP.

  Someone has ideas of how to do to solve this problem?

  Thank you

  Brad

  
  

• Upgrade of RAM Kingston DC7900 SFF Compatibiltiy

  I have a DC7900 Small Form Factor with the following specifications:

  CPU: Intel Core 2 Duo E8500

  RAM: 2 GB DDR2 - 6400 800 Mhz

  Graphics card: integrated Intel GMA 4500

  HARD drive: 320 GB + 2 TB SATA2 7200 RPM SATA2 internal

  ODD: DVD +-R/RW

  OS: Windows 7 Ultimate 32 bit

  The issue is that I am looking to buy a 4 x 2 GB DDR2 (8 GB total) 800 Mhz RAM to replace the existing 2GB Kingston who is currently in the system.

  The RAM has features of:

  Brand: Kingston

  Memory type: DDR2

  Capacity: 8GB (4x2GB)

  Pins: 240 - Pin

  Speed:800 MHz(PC2-6400)

  Case latency: CL6

  Voltage: 1, 8V

  ECC:no

  Dual Channel: Yes

  Buffer / registered: Unbuffered

  Please advise on the compatibility with the current system. Thank you.

  Hello

  Download and CPU - Z allows to check the technical specifications for your existing DIMM before buying anything. Now match the specifications with the DIMMs that you plan to buy.

  HP strive in the documentation to use the same hours of CASES between DIMM.  The DIMM ELPIDA bars are CL6.

  If you have only one dimm and then buy four to ensure the best compatibility and performance.

  Good luck.

  BTW - your PC is running only W7 32-bit if you need to upgrade to 64-bit to take advantage of more than 4 GB of memory.

• ram Windows 7 64 bit problems

  I have windows 7 64 bit with a PNY Nvidia GT630, Intel Pentuim D 3.2 Ghz I recently upgraded from 32 bits that I had the same problem on. I have 2 x 4 GB ram sticks and 1x2gb 1x1gb. I've been running the 1x1gb and 1x2gb ram sticks very well for the last year or two. I bought the 2 x 4 GB ram sticks online and they have the same specifications as the ones I installed. When I installed the RAM sticks 4 gb bobbin fans up faster that normal and the motherboard beeps for a second to two seconds. No matter what I always did beep with the 4 GB installed ram sticks. Record: Operating System Windows 7 Home Premium 64 - bit SP1, processor Intel Pentium D 940 Presler 65nm technology, RAM 3.00 GB Single - Channel DDR2 at 266 MHz (4-4-4-12), motherboard ASUSTek Computer Inc. EMERY2 (Socket 775), graphics HF207 (1600x900@60Hz) 2047 MB NVIDIA GeForce GT 630 (PNY), 232 GB Seagate ST3250824AS (SATA) 232 GB Seagate ST3250824A storage

  Motherboard
  Reference of the manufacturer ASUSTek Computer Inc.
  Model EMERY2 (Socket 775)
  Version 0ny1114RE101EMER200
  Intel chipset provider
  Model of i945P chipset
  Chipset revision A1
  Southbridge Intel supplier
  Southbridge 82801GB (ICH7/R) model
  Southbridge revision A1
  System of temperature 40 ° C
  BIOS
  Mark Phoenix Technologies, LTD
  Version 3.19
  Day 08/12/2006

  Obviously, the 4 Gig sticks are somewhat different.  RAM is VERY picky.  Even if they have the same latency but another manufacturer they can cause problems as you see

• DVD-RAM UJ-820 s: speed problems

  Just wondering if someone has managed to solve the problem with UJ-820 s, i.e. the speed not how it should be for the writing/extraction. I had to use using a USB to get anything above 2 x when the specs say that it should go to 4 x - false advertising?

  I guess the drive need a firmware update, but it doesn't seem to be an easy way to contact Toshiba to get one!

  See you soon

  Dave

  [Edited by: admin]

  Hello

  What you mean exactly with speed not how it should be for writing/ripping? You can burn DVD - R with a X 4 speed?

• For my IBM thinkcenter M/T 8171 cto Ethernet driver

  I can t find drivers that works on my thinkcenter so please can you help me!

  Hi nivo007, welcome to the forum.

  you have a S51 and should find everything you need from the following link.

  http://support.Lenovo.com/en_US/research/hints-or-tips/detail.page?docid=PD022623

• (all the) programs stop responding for 30 to 60 seconds. He just put in 1 GB of additional ram, does not solve the problem

  STOP AND GIVES PROGRAMS (PROGRAM STOP RESPONDING BACK TO TOP.) WILL BEGIN TO WORK SOMETIMES, SOMETIMES IT FREEZES THE SYSTEM. WERE ALSO TWO WPD FILES VOLUMN DRIVER LOADED, I UNINSTALL THE 2ND ON (THE WHO CANNOT LOAD AND LET THE FIRST (DRIVER WORKING) INTACT.?)

  Well, I'm glad that your problem has been resolved. If you wish you can mark your post as the answer so that other users know your problem has been resolved. Have a nice day Walter!

• This RAM Kingston works on my Dell E520?

  This RAM works 100% on my Dell E520?

  I have a Dell DM061 Mainboard.

  
  

• RAM upgrade for the e520 problem

  Hi all. My Dim520 should take 4 gigabytes of RAM, in 2 installments of 2 x 1 GB. It says in the manual. I don't really have as much RAM, but as it went VERY cheap, I bought two 1 GB 533 Mhz DDR2 cards just because they were there. I installed the 2 cards, but my computer only recognizes 3 GB. Am I missing something completely obvious? Thanks in advance for your suggestions.

  
  

• Office model IBM Thinkcenter D7G, type computer 8183 (old series)

  Hello

  It seems that I can not find such a product to investigate errors on this forum, if I'm not mistaken...

  All of a sudden, the machine DOES not start and it seems he is stuck after 2-3 seconds of power in... I checked all connectios inside, they seem fine... no cable has been disconnected... I guess that the BIOS should be checked with a professional tool... No display at all on the port VGA at all... so boring and irritating

  Check your motherboard battery. I have seen machines with used batteries work perfectly as long as they were connected, only the failure of the first time they are disconnected, then restarted.

• Kingston KTT533D2/512 for Toshiba Qosmio G20-127 RAM memory

  I'll install additional 512 x 2 sticks of RAM in my computer Toshiba Qosmio G20-127. Someone has already installed RAM Kingston memory? BTW, how many RAM slots in Qosmio is? There are 4?

  Hello

  Just 2 slots are available. The device can handle with 2 GB max. unfortunately I can't tell you anything on the module of RAM Kingston, but the Configurator Kingston said that these modules are compatible should avoid any problems.

  Good bye