This type of functionality of bookmark exist for FF?

Similar Questions

• I used the functionality of bookmark successfully for some time, however, just reciently I can't locate the function 'organize bookmarks '. It seems to be missing from the usual list of options.

  Have been using Firefox Bookmarks for awhile. Just noticed recently when I open the bookmarks that everything is there except the option to 'Organize Favorites '. I tried to rename a folder, but two names - organize bookmarks is missing from the top of the list.
  Is this good, unusual or the result of a virus or what?
  Should I reinstall Foxfire. I don't want to lose all the files.
  Appreciate any advice. THX

  In the Firefox Orange button > bookmarks > show all bookmarks > organize etc.

• These two types of schema cache can co-exist for the same application?

  Can these two types of cache-regimes co-exist for the same application in coherence?
  1. close to support-maped by regime distributed cache
  2-reading-writing-support-card system

  From what you describe, that you're on track.

  I think that you have a number of servers that have a size limit near cache and stored disabled for distributed share. Then you have a number of servers that are responsible for the part of writeback (active storage) distributed.

  You can also take a look at the [best practices for consistency | http://coherence.oracle.com/display/COH35UG/Best+Practices]

• all the functioning.what to stop USB ports causes this type of problem & how do I fix him?

  Can someone help me please, all ports USB to my pc stops functioning and im having problems using flash & Internet communication. I want to know what causes this type of problem & how can I fix him?

  Hello

  · What happens when you use the USB ports?

  · You receive an error message or error code?

  · What is the number and the model of the computer?

  · Do you remember any recent changes on the computer?

  See: advanced troubleshooting tips for General USB for Windows XP problems: http://support.microsoft.com/kb/310575

• Another parent window already exists for this section

  Hi people, I'm some workflows (GSM and NDP) increment in my case, unfortunately after that I created these workflow I am confronted with many questions. The most common problem happens when I go to a new stage, I get the message: "another parent window already exists for this section.
  In other cases I get messages like this:
  
  Server error in ' / NDP ' Application.
  --------------------------------------------------------------------------------
  
  Exception of type 'Xeno.Web.UI.BusinessObjectUIService.BusinessObjectUIManagerNotFoundException' was thrown.
  Description: An unhandled exception occurred during the execution of the current web request. Please review the stack trace for more information about the error and its origin in the code.
  
  Exception details: Xeno.Web.UI.BusinessObjectUIService.BusinessObjectUIManagerNotFoundException: Exception of type 'Xeno.Web.UI.BusinessObjectUIService.BusinessObjectUIManagerNotFoundException' was thrown.
  
  Source error:
  
  An unhandled exception is generated during the execution of the current web request. Information regarding the origin and location of the exception can be identified using the exception below stack trace.
  
  Stack trace:
  
  [BusinessObjectUIManagerNotFoundException: Exception of type 'Xeno.Web.UI.BusinessObjectUIService.BusinessObjectUIManagerNotFoundException' was thrown.]
  Xeno.Web.UI.BusinessObjectUIService.BusinessObjectUIService.get_Item (String businessObjectUIMgrId) + 190
  Xeno.Prodika.NPD.WebUI.Activity.ActivityLinearWorkflowDataSource.setParams (StringSplitter ss) + 101
  Xeno.Prodika.Common.ClassProtocolHandler.intializeObject (Object obj, StringSplitter splitter, ObjectArgs args) + 68
  Xeno.Prodika.Common.ClassProtocolHandler.Internal_CreateObject (String name, ObjectArgs args) + 310
  Xeno.Prodika.Common.ClassProtocolHandler.CreateObject (String name) + 11
  Xeno.Prodika.Common.ObjectLoader.createObject (String name) + 64
  Xeno.Web.UI.Common.Popups.LinearWorkflowActionPopup.OnInit (EventArgs e) + 64
  System.Web.UI.Control.InitRecursive (Control namingContainer) + 333
  System.Web.UI.Page.ProcessRequestMain (Boolean includeStagesBeforeAsyncPoint, Boolean includeStagesAfterAsyncPoint) + 378
  --------------------------------------------------------------------------------
  Version information: Microsoft .NET Framework Version: 2.0.50727.3053; ASP.NET Version: 2.0.50727.3053
  
  Carlos

  It is also in the installation/upgrade guide, so that you can more details here. However, the string connection Oracle differs from MSSQL and must not contain a server variable.

  Sample Oracle connectstring: "User Id = PLM; Password = password; Data Source = TNS_SOURCE1; »
  sample MSSQL connectstring: "server = localhost; UID = sa; pwd = password; database = prodikaDB ".

  hope that helps.

• My email backup is an old email that no longer exists. This prevent me to reset my password for iMessage. What should I do?

  Hello

  I tried to connect to iMessage and forgot my password.

  I forgot the answers to one of my two security questions.

  My email backup is an old email that no longer exists.

  This prevent me to reset my password for iMessage.

  What should I do?

  Best

  Peter

  So, your password for Messages is the password ID Apple that you are connected to Messages with, except if you use two-step verification, in which case, it would be a specific App password that you can build at any time.

  Do you mean that you forgot your password Apple ID? Or, you use two-step?

  See you soon,.

  GB

• In my laptop, when I open the itunes window there is an option 'Internet Radio' to listen to the different type of music. This "Internet radio" function can be used on my iphone5? And if so, how can I make it work?

  In my laptop, when I open the itunes window there is an option 'Internet Radio' to listen to the different type of music. This "Internet Radio" function can be used on my iphone 5? And if so, how can I make it work?

  No more. It merged with the Apple's music.

• Document is not approved for this type of device.

  I just ordered an eTextbook from McGraw-Hill, downloaded Adobe Digital Editions and used the link provided by the editor to download the eTextbook link file.  When I open the file I get this error message in the Adobe Digital Editions software: "The Document is not registered for this type of aircraft."

  I am running Windows 7 Professional.

  What should I do here?

  This error means that the book is limited to the display on a single device, and you are the computer that you are trying to view is not in it.   If the error is in the error, then you need to talk to McGraw-Hill, so you can re-download the book.

• Error message: "Apps are installed to open this type of link (original)" while trying to run Need for speed most wanted 2012

  Original title: Apps are installed to open this type of link (origin)

  I installed windows 8 and installed all the drivers! then I installed my own specifiquely games I installed need speed most wanted 2012 wen I open it a window "apps are installed to open this type of link (original)" what should I do I become able to run my games properly?

  Hi, I had the same problem, make sure that you only install the game correctly! Make sure you have the latest version of directX installed.

• SQLError: ' #3115 error: SQL Error.', details:' no table of this type: "contact", operation: 'running', detail "

  Hello
  Simply create database SQLite Database Browser 2.0 B1 after creating the database, when I tried to connect in flash cs4 - with air 1.1 his error show me
  
  SQLError: ' error #3115: SQL Error.', details:' no table of this type: "contact", operation: 'run', detailID: "2013" I tried to find anywhere but does not have the solution to this "
  
  my code is here
  
  import flash.filesystem.File;
  flash.data import. *;
  import flash.data.SQLConnection;
  import flash.data.SQLStatement;
  import flash.data.SQLConnection;
  
  var dbFile:File is File.applicationStorageDirectory.resol vePath ("mydb.db");.
  var sqlConn:SQLConnection = new SqlConnection ();
  var sqlState:SQLStatement = new SQLStatement();
  sqlConn.open (dbFile);
  sqlState.sqlConnection = sqlConn;
  trace (status sqlConn.connected + "current"); his show 'true' here
  sqlState.text = "SELECT name FROM contact."
  sqlState.execute ();
  var resultArray:Array = sqlState.getResult () .data;
  
  Thanks in advance

  Hello

  I create my Adobe Air App using Flash Professional CS5 and faced with exactly the same error.

  SQLError: ' #3115 error: SQL Error. ", details:' no table of this type:"categories", operation: 'run', detailID:"2013"

  My SQLite Db was created using Firefox SQLite Manager - extension. The db file is placed in the same folder as the .fla and .swf files. The db has three tables namely: duration and activity categories. I don't understand why I get this error. I even tried to copy paste any other source code of the AS 3.0 but same error reference guide each time.

  The code below is a modified version of the code example in the documentation for reference AS 3.0. Can you suggest how the error above can be fixed?

  / You can also respond to me directly at [email protected]

  /regards

  import flash.data.SQLConnection;

  import flash.data.SQLResult;

  import flash.data.SQLStatement;

  import flash.display.Sprite;

  import flash.events.SQLErrorEvent;

  import flash.events.SQLEvent;

  import flash.filesystem.File;

  var conn: SQLConnection;

  var insertCategory:SQLStatement;

  var dbFile:File;

  //*************************************

  databaseConnect();

  //*************************************

  function databaseConnect (): void

  {

  define where the database file is located

  var appStorage:File = File.applicationStorageDirectory;

  dbFile = appStorage.resolvePath ("MyBudgetCalc.db");

  Open the database connection

  Conn = new SqlConnection ();

  conn.addEventListener (SQLErrorEvent.ERROR, errorHandler);

  conn.addEventListener (SQLEvent.OPEN, openHandler);

  trace ("dbFile.exists:" + dbFile.exists);

  conn.openAsync (dbFile);

  }

  Called when the database is connected

  function openHandler(event:SQLEvent):void

  {

  conn.removeEventListener (SQLEvent.OPEN, openHandler);

  starts a transaction

  Object (this).inputfield.text = "openHandler called..";

  conn.addEventListener (beginHandler, SQLEvent.BEGIN);

  Conn.Begin ();

  trace ("openHandler sweetness...");

  }

  Called when the transaction begins

  function beginHandler(event:SQLEvent):void

  {

  conn.removeEventListener (beginHandler, SQLEvent.BEGIN);

  trace ("beginHandler - SQLEvent message:" + SQLEvent.message);

  Object (this).inputfield.text = "called beginHandler..";

  insertCategory = new SQLStatement();

  insertCategory.sqlConnection = conn;

  insertCategory.text = "INSERT INTO categories (id, name) VALUES (', Auto')";

  insertCategory.execute ();

  insertCategory.addEventListener (SQLEvent.RESULT, insertCategoryHandler);

  insertCategory.addEventListener (SQLErrorEvent.ERROR, errorHandler);

  trace ("sweetness beginHandler..");

  }

  Called after the record of phone number is inserted

  function insertCategoryHandler(event:SQLEvent):void

  {

  insertCategory.removeEventListener (SQLEvent.RESULT, insertCategoryHandler);

  insertCategory.removeEventListener (SQLErrorEvent.ERROR, errorHandler);

  No errors so far, so commit the transaction

  conn.addEventListener (SQLEvent.COMMIT, commitHandler);

  Conn.Commit ();

  trace ("outgoing insertCategoryHandler after conn.commit ()...");

  }

  Called after the transaction validation

  function commitHandler(event:SQLEvent):void

  {

  conn.removeEventListener (SQLEvent.COMMIT, commitHandler);

  trace ("commitHandler() output: all Transaction...");

  }

  Called whenever an error occurs

  function errorHandler(event:SQLErrorEvent):void

  {

  trace ("seizure of errorHandler ()..");

  If a transaction goes, roll back

  If (conn.inTransaction)

  {

  conn.addEventListener (SQLEvent.ROLLBACK, rollbackHandler);

  Conn.Rollback ();

  }

  trace (Event.Error.message);

  trace (Event.Error.Details);

  trace ("sweetness errorHandler()..");

  }

  Called when the transaction is rolled back

  function rollbackHandler(event:SQLEvent):void

  {

  conn.removeEventListener (SQLEvent.ROLLBACK, rollbackHandler);

  }

• XD - bit (CPU function) disabled/not available for Satellite A100-PSAA9

  Last week, I bought the laptop Toshiba Satellite A100-847 (Satellite A100-SPAA9) which has an Intel Core 2 Duo, model T7200.

  Specifications Intel, this processor (as all Core and Core 2 processors) has the particularity of XD - bit, known in Windows like DEP. I had the unpleasant surprise to discover that this feature is
  reported by Windows as unavailable (in hardware). I got the electronic manual on the recovery CD (which is an edition that is older than the printed manual that comes in the package) that I can do this feature
  available (for some older models of Satellite) but I couldn't find any option in my BIOS to do this (my BIOS is made by Phoenix, version 2.0).

  I really want to know how to make this feature available/active as my processor socket and so is the operating system purchased with the laptop and more than that, this feature is something beneficial - specially designed for security reasons and supported by all modern processors and operating systems.
  What do I have to wait for an updated BIOS include this option (to activate the feature XD bit) or that it is automatically set as active/available (instead of disabled/not available)?

  I expect a well documented answer from someone who knows what I'm talking about.

  Thank you very much.

  Hello

  I know what you're talking about.
  Execute Disable Bit (xD-bit) Intel can help prevent certain malicious types of buffer overflow attacks when combined with a compatible operating system.
  Disabling malware code procedure is called the extension-> short adj. data protection

  Data Execution Prevention (DEP) helps prevent damage from viruses and other security threats that attack by running (executing) malicious code of the locations of memory that Windows and other programs should use. This type of threat causes damage by taking over one or more locations of memory used by a program. Then she spreads and harms other programs, files, and even your email contacts.

  Unlike an antivirus program or firewall, DEP does not prevent harmful programs from being installed on your computer. Instead, it monitors your programs to determine if they use the system safely memory. To do this, DEP software works alone or with compatible microprocessors to mark some memory locations as "non-executable".

  If a program tries to run malicious code or not a protected location, DEP closed the program and notifies you.
  DEP can take advantage of software and hardware support. To use DEP, your computer must be running Microsoft Windows XP Service Pack 2 (SP2) or later version, or Windows Server 2003 Service Pack 1 or later version. Software only DEP helps protect against certain types of malware attacks, but to take full advantage of the protection DEP can offer, your processor must support "execution protection".

  The Windows 32 bit (SP2) version supports bit off Execute (xD) so the computer function notebook processor is running in mode of extension (PEA) physical address.
  It is a technology based on hardware designed to mark the locations of memory as non-executable.
  If your processor doesn't support hardware DEP, you need to upgrade a processor that offers execution protection features.

  However, you can see the control panel-> system-> Advanced tab-> Performance settings-> Data Execution Prevention tab.

  By default, DEP is enabled only for essential Windows operating system programs and services. In order to protect more programs with DEP, select turn on DEP for all programs and services except those I select.

• When downloading, by chance, I clicked on "always open this type of file. Now every time I download a file, the computer opens the first file. It's annoying. How can I cancel it?

  I use WIndows Vista on my computer.  When you download a file, I clicked on "always open this type of file.  Now every time I download a file, the computer opens the file first.  How can I cancel it?

  If you mean that you click always ask before opening this type of file which turned off, please see this article if this could help restore function:

  Re-enable always ask before opening this Type of file check box in Windows
  http://helpdeskgeek.com/how-to/re-enable-always-ask-before-opening-this-type-of-file-check-box-in-Windows/

  Scroll down to Windows 7 and Vista

  Important:  The article contains steps that tell you how to modify the registry. However, serious problems can occur if you modify the registry incorrectly. Therefore, make sure that you proceed with caution. For added protection, back up the registry before you edit it. Then you can restore the registry if a problem occurs. For more information about how to back up and restore the registry, click on the number below to view the article in the Microsoft Knowledge Base:

  How to back up and restore the registry in Windows
  http://support.Microsoft.com/kb/322756/

• "The selected task... no longer exists" for almost all tasks (Win7)

  I opened the Task Scheduler in Windows 7 the other day and received dozens of separate messages, telling me that the tasks no longer existed. This included not only those that I created myself, but also for programs installed and crucial tasks of Windows System. The Scheduler is running and knows the names of tasks, such as confirmed by the command line.

  I looked at the entrance to register TaskCache and it seems that only 4 tasks remain in it - a random selection that includes one of McAfee, two Google Update and Windows Defender. No other tasks that have xml files in the task (C:\Windows\System32\Tasks) folder are listed.

  I read that these errors can be resolved by emptying the jobs directory of all files except those appearing in the registry and then re-import all the. I tried this for a single task that I created myself, and it succeeded. The fact for all tasks would take a very long time, but there is another problem: the Windows themselves tasks do not appear in the registry and I can't move or delete the Windows subdirectory under the task (C:\Windows\System32\Tasks\Microsoft\Windows) folder, even when I start a cmd as administrator session.

  Any suggestions or advice welcome. Thanks in advance.

  Hello

  Thanks for posting your query in Microsoft Community.

  Important: problems can occur if you modify the registry incorrectly. Therefore, make sure that you proceed with caution. For added protection, back up the registry before you edit it. Then you can restore the registry if a problem occurs. For more information about how to back up and restore the registry, click on the number below to view the article in the Microsoft Knowledge Base: How do I back up and restore the registry in Windows

  In addition, it seems that you use several security software. Windows Defender is automatically disabled when using any 3rd party security software. Thus, the problem you are having, could be due to a conflict between the 3rd party software.

  Step 1: Therefore, I first suggest you put the computer in a clean boot state and check if the same behaviour arises.

  To help resolve the error and other messages, you can start Windows by using a minimal set of drivers and startup programs. This type of boot is known as a "clean boot". A clean boot helps eliminate software conflicts.

  Place your system in the clean boot state helps determine if third-party applications or startup items are causing the problem. You must follow the steps in the article mentioned below to perform a clean boot.

  How to perform a clean boot in Windows

  Note: see 'How do I reset the computer to start normally after a boot minimum troubleshooting' to reset the computer starts normally after troubleshooting.

  Step 2: Please refer to the suggestions in the help of TechNet support to solve problems in Task Scheduler.

  Troubleshooting Task Scheduler

  Step 3: Run the System File Checker tool

  System File Checker is a Windows utility that allows users to find corruptions in Windows system files and restore the damaged files.

  Press the Windows key + X , and then click prompt (Admin)

  Type the following command and press enter

  sfc/scannow

  Note: Do not close the command prompt window until the audit is completed 100%. The results of the analysis will be posted when this process is complete.

  Hope this information is useful. Please feel free to answer in the case where you are facing in the future other problems with Windows.

• C00D11B1 error - cannot read this Type of file... even if she had been. Media Player W.

  Hello.

  As above, I now get the "C00D11B1" error code when you try to play MPG files out of my camera through Media Player.  It cannot read this type of file.  Unfortunately, for the past six years, he played identical videos taken out of this camera.

  Help on the Web sends me to a page that doesn't seem to be not applicable, with my sound card is the issue (it is perfectly functional, plays MP3s, etc.).  Media Player plays all the other files it usually plays (AVI, MP4).

  I checked with Windows Update, just as a thought.  Nothing has changed - not surprising.

  How can I fix?  I don't want to take just a blind shot to a system restore point.  I'm under the latest Windows 7, 32-bit, and nothing (including the MSE) Watch malware either.  Already tried MS Fix - It. He finds a couple of possible errors and I let correct... but nothing that has solved the problem.

  Thank you very much.

  Well, after trying dozens of solutions across Internet, try to use my Windows recovery disk and each system restore, I had?

  My solution was to reinstall Windows 7 completely.

  It worked.  If you can call the requirement of swatting a fly with a bazooka 'working '.

  Here's my solution.

• Error: The lines of data with unmapped dimensions exist for period "1 April 2014".

  Expert Hi

  The below error when I click on the button Execute in order to load data in the area of data loading in 11.1.2.3 workspace. Actually, I already put in the tabs global mapping (add records of 12 months), mapping of Application (add records of 12 months) and map sources (add a month "1 April 2014' as the name of period with Type = Explicit mapping") in the service of the period mapping. What else should I check to fix this? Thank you.

  2014-04-29 06:10:35, 624 [AIF] INFO: beginning of the process FDMEE, process ID: 56
  2014-04-29 06:10:35, 625 [AIF] INFO: recording of the FDMEE level: 4
  2014-04-29 06:10:35, 625 [AIF] INFO: FDMEE log file: null\outbox\logs\AAES_56.log
  2014-04-29 06:10:35, 625 [AIF] INFO: user: admin
  2014-04-29 06:10:35, 625 [AIF] INFO: place: AAESLocation (Partitionkey:2)
  2014-04-29 06:10:35, 626 [AIF] INFO: period name: Apr 1, 2014 (period key: 4/1/14-12:00 AM)
  2014-04-29 06:10:35, 627 [AIF] INFO: category name: AAESGCM (category key: 2)
  2014-04-29 06:10:35, 627 [AIF] INFO: name rule: AAESDLR (rule ID:7)
  2014-04-29 06:10:37, 504 [AIF] INFO: Jython Version: 2.5.1 (Release_2_5_1:6813, September 26 2009, 13:47:54)
  [JRockit (R) Oracle (Oracle Corporation)]
  2014-04-29 06:10:37, 504 [AIF] INFO: Java platform: java1.6.0_37
  2014-04-29 06:10:39, 364 INFO [AIF]: - START IMPORT STEP -
  2014-04-29 06:10:45, 727 INFO [AIF]:
  Import of Source data for the period "1 April 2014".
  2014-04-29 06:10:45, 742 INFO [AIF]:
  Import data from Source for the book "ABC_LEDGER".
  2014-04-29 06:10:45, 765 INFO [AIF]: monetary data lines imported from Source: 12
  2014-04-29 06:10:45, 783 [AIF] INFO: Total of lines of data from the Source: 12
  2014-04-29 06:10:46, 270 INFO [AIF]:
  Map data for period "1 April 2014".
  2014-04-29 06:10:46, 277 [AIF] INFO:
  Treatment of the column mappings 'ACCOUNT '.
  2014-04-29 06:10:46, 280 INFO [AIF]: data rows updated EXPLICIT mapping rule: 12
  2014-04-29 06:10:46, 280 INFO [AIF]:
  Treatment of the "ENTITY" column mappings
  2014-04-29 06:10:46, 281 [AIF] INFO: rows of data updates to EXPLICIT mapping rule: 12
  2014-04-29 06:10:46, 281 [AIF] INFO:
  Treatment of the column mappings "UD1.
  2014-04-29 06:10:46, 282 [AIF] INFO: rows of data updates to EXPLICIT mapping rule: 12
  2014-04-29 06:10:46, 282 [AIF] INFO:
  Treatment of the column mappings "node2".
  2014-04-29 06:10:46, 283 [AIF] INFO: rows of data updates to EXPLICIT mapping rule: 12
  2014-04-29 06:10:46, 312 [AIF] INFO:
  Scene for period data "1 April 2014".
  2014-04-29 06:10:46, 315 [AIF] INFO: number of deleted lines of TDATAMAPSEG: 171
  2014-04-29 06:10:46, 321 [AIF] INFO: number of lines inserted in TDATAMAPSEG: 171
  2014-04-29 06:10:46, INFO 324 [AIF]: number of deleted lines of TDATAMAP_T: 171
  2014-04-29 06:10:46, 325 [AIF] INFO: number of deleted lines of TDATASEG: 12
  2014-04-29 06:10:46, 331 [AIF] INFO: number of lines inserted in TDATASEG: 12
  2014-04-29 06:10:46, 332 [AIF] INFO: number of deleted lines of TDATASEG_T: 12
  2014-04-29 06:10:46, 366 [AIF] INFO: - END IMPORT STEP -
  2014-04-29 06:10:46, 408 [AIF] INFO: - START NEXT STEP -
  2014-04-29 06:10:46, 462 [AIF] INFO:
  Validate the data maps for the period "1 April 2014".
  2014-04-29 06:10:46, 473 INFO [AIF]: data rows marked as invalid: 12
  2014-04-29 06:10:46, ERROR 473 [AIF]: error: the lines of data with unmapped dimensions exist for period "1 April 2014".
  2014-04-29 06:10:46, 476 [AIF] INFO: Total lines of data available for export to the target: 0
  2014-04-29 06:10:46, 478 FATAL [AIF]: error in CommMap.validateData
  Traceback (most recent call changed):
  Folder "< string >", line 2348 in validateData
  RuntimeError: [u "error: the lines of data with unmapped dimensions exist for period" 1 April 2014' ""]

  2014-04-29 06:10:46, 551 FATAL [AIF]: COMM error validating data
  2014-04-29 06:10:46, 556 INFO [AIF]: end process FDMEE, process ID: 56

  Thanks to all you guys

  This problem is solved after I maped all dimensions in order of loading the data. I traced only Entity, account, Custom1 and Custom2 at first because there is no source map Custom3, Custom4 and PIC. After doing the mapping for Custom3, Custom4 and PKI, the problem is resolved. This is why all dimensions should be mapped here.