Thread for the diagnostic tool of problem-HP errorcode BIOHD-8 (hard drive)
For my HP-Pavilion - model P6367c
I also put the BIOHD-8 error Code.
Test: WDC WD10EADS-65M2B0 (wd-wmav51126570)
suggestion: save your data
suggestion to contact the HP Support
When I do the recovery PC Statup screen, it works only for hours, or even days... occaisonally restart itself. It has been 4 days. I don't know I'm done on this. As in some of the previous discussions, the restore points that I know have been created, displays none not being created. I made a backup, but through Norton. Not sure how the backup will help until I get my computer runnign again.
What should I do?
If she needs takign apart my changing computer hard drives... forget it... I've done enough of that in my life. Rather spend time with my children.
Help, please... It has all my photos and my finances on it.
Thanks, Greg
Greg, welcome to the forum.
The BIOHD-8 error Code tells you that your hard drive has failed. Therefore, you will need to replace it before you can restore your computer. I hope that you have a backup of your personal data.
Here's a guide that will help you understand the error code.
Please click on "BRAVO", if I helped you and click on "Accept as Solution" If your problem is resolved.
Tags: HP Desktops
Similar Questions
-
Diagnostic tool for HP errorcode BIOHD-8 (hard drive)
ERR1ERR3
Received this error code and the importance of knowing if I can recover. Smart test failed.
Drive WD-WCAT15767189 model
All the help of some new friends?
Kevin in Wi
You can order HP recovery discs. HP recovery disks.
You might consider taking the car and see if a local PC repair shop can extract the data and/or test before buying a new hard drive.
These articles can help.
-
What is the Diagnostic tool?
When I select "Tools of diagnosis", since the programs/Toshiba/Utilities all what is supposed to happen? I get a circle turning in circles, but never the full screen charge and/or appears.
Is this normal or should I see a screen that says something like, everything is good and there are no problems? Thank you...
Hello
Good explanation here what the diagnostic tool is > http://aps2.toshiba-tro.de/kb0/FAQ5C018S000ER01.htm
+ The key Assist from Toshiba offers easy access to the Diagnostic tool +.
Try it. -
Diagnostic PC Toshiba tool shows not all components in the Diagnostic tool
Hello
I recently had some problems with my Satellite A200 laptop computer screen freezes, do not restart correctly after hibernation and battery warnings displayed even if it is still plugged into the mains to low. When I get battery it will eventually die. I jumped the battery - put new - turned the laptop on - and the battery is at full capacity! Anyway, I've updated the BIOS and I tried to run the diagnostic tool to see if it no problem. Problem is there is that anything posted in the Diagnostics tab to test!
Any help would be much appreciated.
Toshiba PC Diagnostic tool is part of the package of added value, so you can try to reinstall VAP.
You can find on Toshiba support and download page.Remove pre-installed VAP, restart your computer and install the latest version of the Toshiba page.
-
We bought a license for adobe Photoshop cs5 and the machine, we have installed this app is having hardware problem then we moved this hard drive on another machine and now there are registration conflicts, and we couldn't save it please help us solve this problem.
Most likely, you will need to contact Adobe to reset your license.
-
Does anyone have a cheat sheet for shortcuts for the pen tool or any detailed instruction starting for PC on Photoshop users essential? I don't have a MAC thank you.
The main keyboard shortcuts are:
SHIFT + P to select the pen tool
Click to create a path with straight lines between points (hold down the SHIFT key to perfectly horizontal or vertical lines) or click and drag for curves by using levers extended to your desired shape.
Press the Alt key (cursor changes in > when you hover over a point) and you can re - position for example to move one end of a lever regardless of the other end.
Press Ctrl Key and cursor changes to the white pointer - click anywhere on the path to highlight all points while the Ctrl Key is pressed again to choose a single point. You can then refine this single point, for example by using the arrow keys on the keyboard.
This video tutorial provides more information:
http://Bitcast-r.v1.sjc1.BitGravity.com/InfiniteSkills/iSkills-media/photoshopcs6-demo/120 2.mp4
-
EP 9: "no options for the current tool.
When I try to replace the color in PSE 9, will not change the color. Instead, I get the message 'no options for the current tool. "
The instructions are simple: improve-> adjust color-> Replace color. However, when the eyedropper tool is selected, I get "no options for the current tool.» Any help will be greatly appreciated.
-GD
If you see that in the options toolbar, this is normal.
Here's a video showing how to use Enhance > adjust color > replace color
-
Set preferences for the text tool
Is there a way to change the preferences for the TypeTool? For example, when used to create a frame, can I put it so that the vertical justification is Center instead of top? At the present time, I have to use the B command to bring up a Panel to make this change. CS4 on Mac.
You don't talk about preferences for the text tool. It would be for the character or the formatting. You talk about preferences for a frame type.
You must create an object Style (window > Styles > object Styles) which creates a frame in the way that you want and apply like a style of object.
-
How can I change the size of the race for the Brush tool?
Hey guys,.
I wanted to know how to set the size of the race for the Brush tool? It seems I can only fix the pencil too race size. All suggestions are useful!
Thank you
When you select the Brush tool there are two points that appear at the end of the tools. One is for the size of the brush, the other is for the shape of the brush.
Something else to vary the size of the brush over is a zoom before or zoom out of the scene. Size of the brush does not fit so if you do very small step the brush becomes very large comapratively.
-
most of the information is in my question. My profile on my home computer is limited. I would like to set up Firefox so it puts the profile and any other information on my external hard drive. I tried all of the optional parameters, but have not been able to solve the problem
You can use the Profile Manager to create a new profile, then click on the button choose to set the location of this profile on the other disk. You must specify a new (empty) location for this profile because Firefox uses the specified location and does not create a new folder. This allows you to specify an already existing profile on this player and Firefox it will use.
See the location of the custom profile > Firefox Thunderbird and SeaMonkey 2
-
How long should I wait for Windows XP Home Edition install on a 80 GB HARD drive
I waited over an hour for the Windows XP Home Edition install on a 80 GB HDD & NO reboot or setup menu appears on the screen. What seems to be the problem?
Change your HARD drive on the IDE slot primary. Then restart.
-
No problem if I defragment my hard drive every week?
I do a lot of downloading and remove daily records, causing many fragments of hard drive.
Someone has suggestions about any problem if I defragment my hard drive every week?
Thanks in advance for your suggestions
No problem for the traditional electromechanical drives.
For SSDS, you do not want to limit this frequency to something much smaller.
-
I installed java and it wiped out my computer, no program, no picures, no parameters on the left? He even wiped my restore points.
I tried to restore to the point of installation of java, but alas nothing has happened, now I get all these boxes warning "windows-delayed write filed" hard drive failure ' x 5 and also warning mean my HDD is in peril of the personal data. This single icon left on my desk is the internet explore and internet runs very slowly, I am reluctant to sign something incase, there a virus or something.
Please help me!
Hi Carolinelightfoot,
This error message occurs when the system could not read and write data to the registry file. The error indicates a problem with the registry.
Method 1:
You can run a Checkdisk to see if there are drive errors that can cause this problem.
Check your hard drive for errors
Note: When you run the disk check, there is a chance of losing the data that you can take a backup of important data before you run checkdisk.
Method 2:
You can also try to boot from a full version of Windows Vista installation disc and try to perform a restore of the system to WinRE (Windows Recovery Environment)
What are the system recovery options in Windows Vista?
Hope this information is useful.
-
I said that I need the permission of the administrator (I am the administrator) to copy a file to one external hard drive to another. I used the same computer and peripheral for the past two years with no problems until today when I opened upward after being away on vacation. I use Windows 7. I'd appreciate any help out there.
BHA
Original title: the administrator permission
How to open a file if I get an access denied message?
http://Windows.Microsoft.com/en-us/Windows7/how-do-i-open-a-file-if-i-get-an-access-denied-message
Troubleshoot "access denied" when opening files or folders [good for Win7, too]
Windows 7: access denied - WHY?
http://www.SevenForums.com/general-discussion/19745-access-denied-why.html
-
I have ownd Adobe Acrobat 8 Standard (serial number < removed >). I bought new about 3 years ago and have my original CD, box and the serial number. I had to reformat my hard drive and reinstall windows 7 original. Everything is OK. Now I'm trying to reinstall my Acrobat 8 legally bought and paid for, but he says that it cannot connect to Adobe to confirm my serial number and gave me only 30 days use because it is not registered.
Help, please
Post edited by: Bil Colthurst
Serial number and activation support (non - CC) https://forums.adobe.com/thread/2041990 to adjust the number of activations
If the cat person sends you back to this open forum, you are out of luck... only Adobe can help, nobody here can access the activation server
Maybe you are looking for
-
Firefox has a home page, like IE or should I use a different browsers home page?
I want out of the MSN homepage in IE and I was wondering if a homepage is available in Firefox? I can't seem to find anything that could answer this question, but I'm not well versed in the use of the computer.Probably a thing of the age.
-
the upgrade button would light up to go to the site because it says that there is an error... How can I get the appropriate upgrade 11 media to block the protection of licenses on those files that have built in accept them
-
Age of Empires II does not work with Vista or Windows 7
I could not get Age of Empires II working on my laptop - first with Vista and now Windows 7. It installs OK and when you go to launch the small graphics launch box comes up, then the screen becomes phsychedelic before returning to normal and nothing
-
I have a Business Inkjet 2800 printer and scanner HP Scanjet 5470c on my XP PCs that HP doesn't provide drivers for Windows 7. Can I attach these devices for my new PC running Windows 7 Professional in XP mode? I have searched for hours on the site
-
Graphic Windows Mail in signature does not
Windows Mail... The graph of the signature will not be displayed even after the backup in a Windows message htm file by following the instructions. It worked before, but now it does not work. Any suggestions? The square appears with the name of th