Threshold of change by easy group or vm?

Similar Questions

• Can I programmatically change the active group on a Hypertrend in DSC?

  I would like to know how to change the active group of a hypertrend program in Labview DSC.  I saw a link that says it can be done at Lookout.  But in the module DSC, the active group is read-only.

  I know a hard way to do it.  I could save the settings of hypertrend as xmlSettings in a temporary file.  The active group is one of the parameters.  I could then change the group active in this file text to point to the new group, and then reload the settings.  But this isn't a clean way of dong it.

  Anyone know if there is an easy way?

  I found a way to do it but not very clean.  I don't know why there is no function to change the current group.

  Here's how I did it.

  

• Change the layer group

  Hello
  I need to change several layers who are grouped.
  There is a way of Change them all together without merging or without turn to Dynamic objects?
  For example apply effects and mainly offset moves?
  Thank you!

  -----

  OLA,

  EU preciso editar vários layers that are agrupados.

  HA uma'm edita-los todos juntos mesclar sem or Shem transformar em Smart Objects?

  Por exemplo apply efeitos e principalmente deslocamentos lag?

  Obrigado!

  Hi Cello.25,

  Greetings!

  You can create a group of these layers and then make the change for the Group competition.

  Apply a clipping mask to show changes to this group in particular.

  concerning

  Jitendra

• external authentication table not updated of changes in user group

  Hello
  
  I have a question...
  
  In OBIEE, I use authentication external table. I have the user and user group tables where users and groups are shops... Whenever I have to create a new user and assign them to a group, these recordings get immediately inserted into these tables with the right user and group ID that matches up with the other... Then in my boot block, the query that retrieves the user name and the psswd I and the names of groups...
  
  All these work in the initial creation of the user. For example, when I create a user and assign it to the Group A, the DB table has all the records that are inserted correctly. When I connect OBIEE using the user a login name, I see that he is assigned to the B group.
  
  The problem comes when I change user A group b group c. When I did, although the DB table is updated correctly, OBIEE session always seems to be the earlier. So, when I connect the second time, I see that the user is always assigned to group B instead of Group C... This seems to be cached...
  
  I'll double check these user tables in OBIEE, none of them are active cache... The isolation level connection pool is set as default...
  
  When I reinstall OBIEE everywhere again and re - login the first time, this user is now assigned to group c...
  
  Seems to be that it's a caching issue.
  
  How can I solve this problem
  
  Appreciate in advance

  Section of target variable use change data target... button.

  I guess you're with lines of initialization.

• A change of Yahoo Groups has made AD/name of the original sender is no longer visible in the header.

  Before the change, the field would display the senders address or name (link) If no name was provided. After changing the group name / email (link) is displayed in the sender field.

  The sender is now displayed at the bottom of the page as "posted by: xxxx xxxx [email protected].

  Curiously the pop-up notification window appears the name of shippers. Whatever the change took place may 9, 2014. Webmail applications including Blackberry are not affected by this change.

  Any suggestions?

  Try the menu (ALt + T) tools > Options > advanced > reading and display and turn to the use of display names in the address book.

  Does the display list and the match of notification?

  If so, you can re - turn on the option and locate the e-mail address of groups in your address book and disable the display use for this entry name. Note that the next version of Thunderbird will be termination of the use of the address book as a whitelist for graphs, so you can be able to simply remove the address in the next release.

• Change the easy keys on P-series of satellites

  For some reason, I can't change the settings of the so-called easy keys (it is the keys on the computer itself above the keys F - which enables access to internet, multimedia, play, stop, and so on).

  I wonder if someone can tell me why there is a program where I can decide wether I want to the Internet and multimedia keys to access internet or something else. It only will allow me to access the drive media and internet. No matter how many times I change media keys such as Media Center or something else, it always goes to Media Player.

  Any ideas?

  Hello

  If you didn t already verified, if you can change the settings of the keys through the program of toshiba, then won´t you have a bit of luck to affect your own
  programs to the key, because it s statically.

  There may be a small program (not toshiba) which can handle these keys? The only way to find this point is google around and search for it.

  Greetz

• Win 7 Pro 64: Poweroptions Panel changed by Easy Transfer

  Hello

  I used Easy Transfer to migrate files and settings from my laptop Lenovo to my new desktop.

  On the laptop Lenovo the left sidebar of the poweroptions Control Panel has been changed by Lenovo's Powermanager (2 links to Powermanager) and 1 link to a Lenovo Web site. Easy transfer migrated this change to the Windows on my new desktop computer where Lenovo Powermanager is NOT installed and I have now 3 dead links on the left sidebar of my control panel Poweroptions I can not delete.

  screenshot: https://www.dropbox.com/s/yexoawu4a9wiky5/Energieoptionen.bmp

  I searched the registry already without finding any entry which seems to be responsible. Maybe the powercfg.dll been changed? But change dll file transfer?

  Who can help?

  Thank you very much!

  I found the solution:

  The registry looking for Thinkpad/utilities/PWM showed 3 keys and their removal has solved the problem.

  Best regards

  Andreas

• Change the Port Group Namespace for autonomy through the API?

  Work with vShield / POSSIBLE 5.5.0a.

  Take a group of ports which, out of the box will have a default namespace. As a result, you see the following menu items and information:

  

  By clicking on the Stand-alone namespace change link is there for that. We now have a group of ports with the stand-alone namespace and the additional menu tabs, firewall App and SpoofGuard.

  

  I can of course change for autonomy through the user interface, but can not find the equivalent API calls in the vShield API Programming Guide to do it programmatically. Can someone please advise on how to do this via the API?

  Thought that I would realize, since I figured this out in the end - a case of RTFM! Namespaces to appear in the Guide of programming on page 186, but there is no explicit mention of the way to make a group of independent ports. However, after revisiting the guide the penny dropped that adding a space of names to the data center is the equivalent of the evolution of a group of ports to a stand-alone namespace. Once you enter that (may be more obvious to you, it was for me), the examples in the guide can be followed.

  So to change ports for the autonomy group namespace, you must do the following:

  Https:///api/2.0/namespace/datacenter/ POST

  dvPortGroup-xxxxx

  Make sure that the content type is set to application/xml, text/xml (which has worked for me in the document) and not in the contrary case, it fails with a complaint about content type.

• Change the VM group vCenter watch NIC port is connected to the old and the new portgroup

  OK, I have built/upgraded to vSphere 5.

  Everything is fine, and now we migrate the virtual machine to the new VDS switches.

  I'm migrating each VM frm the old VSS to their port group concerned on the VDS.

  EVERYTHING is going very well unless I have a few VM, is that when I change VSS port 'The Virtual Machine Network' group the new service VDS 'Network of the Virtual Machine' vCenter shows the VM as being connected to vSwitches/Exchange.

  If you look at the network/host the virtual computer configuration is shown as attached to the VSS and VDS.

  If you use the CLI PowerShell the VM shows that connected to only the VDS, great she is successful, but how can I remove the old switch if he thinks that it is connected to a virtual computer?

  The VM keep in network connectivity.

  I also tried to change the portgroup interface CLI PS and it returns the same result in vSphere.

  Any thoughts?

  Was it virtual machines running snapshot in assets when they have been migrated from VSS for VDS?

  If so, both can be listed in the properties of the VM... In case you need to return the nod on those virtual machines, they will be then be reconnected to the old vs...

  / Rubeck

• PES 10 can't change read-only groups layer (aka I want to just make a custom in the elements DVD menu)

  A little history: I wanted to make a custom menu, so I opened a copy of one of the menu canned. In PS Elements 10 PSD files.  It opened with all the layers and their showing sublayers.  So far so good.  I made a lot of editting and had my menu pretty much right, recorded and burned a DVD with it.  I saw a few corrections that I need to do so I opened the same. PSD file and it showed all main layers (with the folder icon) but not the attached layers.

  I double-clicked to open these layers and got:

  "You try to open a group, which is not supported in Photoshop Elements.  The layers in this group will be simplified in a single layer.  Simplify the layers? Yes No. »

  I just change these things yesterday.  Everything I've done since then is save my software online. I saw that it said in this forum that "Elements doesn't support layer group/sets' but she was referring to an earlier version, I guess.

  Question 1: Is it always true PES 10?

  Whatanagement 2: if so, how me I edit the other day?

  Thanks in advance for any help you can offer.

  Joe

  #1: Yes.

  #2: I don't know.

  You need use a 3rd plugin to change layer groups.  See this discussion:

  http://forums.Adobe.com/message/3954579#3954579

  Ken

• Two questions - a clipping mask and color change in the Group

  Hello

  I have a file I rendered in Maya as a vector. I'm not that great with illustrator, so I was trying to speed things up...

  In any case, it appears all of the files have a clipping mask. If I unrelease, it shows a plain with a similar dimensions that is the original color of the object. See picture for before and after...

  In addition, article even says it's in a group. For this reason, I can't seem to change its color, and the separate button is gray... very confusing.

  Jared

  To group or ungroup, you must first select the art.

  You can do this with a tool of choice or use the layers panel by clicking to the right of the circle of the name of the groups.

  Then disassociate will be available but it is not necessary to separate so deit if you double-click on the group with the selection tool black arrow he'll bring you back in the isolation mode of the group which will allow you to change the group, as if they were individual objects that are separating.

  When you have finished double click anywhere outside the group to leave the isolation mode. You will find this feature will be preventing them from making bald, because you him tear not all outside whenb group edition in complex projects.

  Regarding the change of color as already mention Nedopil > change color > Recolorier Art more or less the same kind of protection mounting which can save you aggravation in the art complex.

• I am not able to change the political group in my Dell Machine 8.1 windows

  Hello

  My user is a local administrator. but I'm not able to edit group policy.  for example the message when I try to open gpedit.msc is like:

  'gpedit.msc' is not recognized as an internal or external command
  operable program or batch file.

  Please suggest me what I can do? Thank you

  The home edition of any version of windows (NON PRO) cannot participate in areas or group policy.

• Cannot change a user group in Pidgin

  When I move a person from one group to the other in Pidgin, return sign out and then sign back in they are to the original group.   Strangely, this seems to be the case with the people in the group "Manager and peers."  Does anyone know how to get the hang of stick?

  The question is managers and peer group is based on the LDAP structures and will be updated as you log in. The only way you can remove a participant Manager and the peer is if they are no longer a Manager or peer into the system

  Phil

• change the record group for a lov

  Dear Sirs,
  I have a list of value (LOV) and I have 2 record group, and I want to associate each of these group record depends on the conidition
  for example
  
  If condition 1
  associate the record group 1 LOV
  on the other
  associate the record group 2 LOV
  end if;
  
  Please help me
  Thanks in advance

  Check the built-in SET_LOV_PROPERTY, you can use this then assign a recordgroup to a lov.

• Change a resource group at run time?

  Hello
  
  I am looking for a way to change during execution, the value of a key that is defined in a ResourceBundle.
  
  Example:
  My .property file contains a key
  Agilent4155.InstrumentNameIdentifier = HEWLETT-PACKARD, 4156
  who I would like to change, say
  Agilent4155.InstrumentNameIdentifier = HEWLETT-PACKARD, 4155
  
  What I'm looking for is the opposite of ResourceBundle.getString (), so something like setString().
  Google did not say me a response, so I ask here.
  
  A possible implementation would be to open the .property drop one, Say, FileWriter and replace the text manually. But how is it possible to access a (text) file inside a .jar file (compressed)?
  
  Thank you
  Kurt

  _kurt wrote:
  A possible implementation would be to open the .property drop one, Say, FileWriter and replace the text manually.

  Even this would not work once the ResourceBundle had been read in memory of its first use.

  But how is it possible to access a (text) file inside a .jar file (compressed)?

  It is not. At least, it is not possible to write to it.

  Why don't you write your own ResourceBundle subclass that is supported by some data you want structure and add your setString() method to enable updates on the fly? Of course if you want to persist these updates of long term storage, instead of simply exist them during the lifetime of the JAVA virtual machine, you must devise a way to do too, but you identify that as a requirement.