Through the installation of voice in Win & RC 32-Bit - upgrade to Portuguese.

Hello. I tried to install via voice (Portuguese), as Win 7 doesn't support speech recognition in Portuguese for the moment.
I tried several times, but the installation hangs. (as administrator, earlier versions of Windows, etc)...
I uninstalled IE8 and the installation went further, but has not ended.
How can I install Via Voice? Please?

Hi PKBrasil,

Thanks for posting on community forum is ready for Windows 7.

Here is a link that provides more information about language packs for Windows 7.

My understanding of the position, you try to install something via the Portuguese speech recognition feature and installation, to what it is, is not install properly?

Try to start with as minimal a Setup on your system will allow.

Here are the steps to a clean boot process, however, before you are able to install you may need to identify the services which need to be present before installation will take place.

Hello Charmedbysarah,

Thanks for posting on the forum of answers.

I suggest to try a Cleanboot to see if the problem occurs. If it does not occur when you are in a cleanboot, then use the steps in the article to narrow down the cause of the problem,  (Note: this article is referenced for Windows Vista, however, the steps are the same for Windows 7)

Step 1: Perform a clean boot Note if the computer is connected to a network, network policy settings may prevent you from following these steps. We recommend strongly that you do not use System Configuration utility to change startup options on the computer, unless a support engineer Microsoft directs you to do so. This can make the computer unusable.

  1. Log the computer by using an account with administrator rights.
  2. Click Start

    , type msconfig.exe in the box start looking for and then press ENTER to start the System Configuration utility.

    If you are prompted for an administrator password or for confirmation, type your password or click on continue.

  3. On the general tab of the , click on selective startup of , and then click to clear the load startup items check box. (The box use the file Boot isn't available.)
  4. Under the Services tab, select the hide all Microsoft services checkbox and then click disable all.

    Note Following this step lets services Microsoft continue to run. These services include networking, Plug-and-Play, record of events, error reporting, and other services. If you disable these services, you can permanently delete all restore points. Do not do this if you want to use to restore the system with the existing restore points.

  5. Click on and then click OK on restart.

Microsoft Answers Support Engineer
Visit our Microsoft answers feedback Forum and let us know what you think.

Tags: Windows

Similar Questions

  • I have a Samsung NP900X4C laptop (with a 256GB SSD installed) and screwed up through the installation of Win7Prof instead of the upgrade.

    Original title: clean install Win 7 64 bit

    Like others, I have a problem with a clean install of Win 7 64 bit Proffesional. I have a Samsung NP900X4C laptop (with a 256GB SSD installed) and screwed up through the installation of Win7Prof instead of the upgrade. A lot of the buiult in functions do work not (Wireless; Hiring of video, USB Ports etc.) and to top it all off I get now blue screen errors...

    If installing from an external DVD drive, crosses, it shows that the HARD drive has already 4 partitions.

    Partition 1 (e :)) Disk0

    Disk0 Partition 2

    Disk0 3 (C :) Partition System

    Disk0 Partition 4 hidden OEM Partition.

    So far I have just selected Heve installation on Partition 3 C: System.

    Y at - it a utility that I can use to retrieve the data from the OEM Partition I want to return to the initial state by default if possible.

    If not what is the best utility to use repartition (how many and what size?) and format the HDD.

    Cordially chrisxsmith

    The best you can do is to contact Samsung and request recovery media to restore your system to its factory default state.

    Call Samsung to get a recovery disc - to find a phone number for your location:

    Thank you Andre, very appreciated, unfortunately Samsung and their Tech Support here in the UNITED Arab Emirates was not as useful.

    I managed to keep the button restore during the 5 sec boot process that initiated the request 5 restore Samsung which was then able to take the original installation of the hidden Partition image.

    Fortunately the issue is resolved.

  • My OS VISTA stops at halfway through the installation?

    My hard drive I think crashed.  My husband engineering deleted everything on the drive and tried to reinstall my Vista operating system.  But stops at halfway through the installation process, and the screen goes black.  What would be the problem?  Now, it does detect any type of wireless device?  Would it be the device & driver reinstall the CD?  I'm wonering too it would be better to take it just to someone who really knows what they are doing?  My husband reading just forums like this or Youtube videos and I think my computer migh be at a total loss now?  Everything about him lost completely wipeing the own harddirve?   Please help I need my laptop in return. confused

    If you have problems using the process of recovery of your computer, contact the manufacturer of the computer.

    This isn't their recovery process, Microsoft.

    See you soon. Mick Murphy - Microsoft partner

  • I bought an older version of Photoshop Elements (4.0) - in product unused in sealed original packaging. Try to install on my MacBook Air but the part was through the installation, I get this error message: "failed to install. The installer with

    I bought an older version of Photoshop Elements (4.0) - in product unused in sealed original packaging. Try to install on my MacBook Air but the part was through the installation, I get this error message: "failed to install. Setup has encountered an error that caused the installation to fail. Contact the manufacturer of the software. »

    then it is probably too old and incompatible.

  • pit stop halfway through the installation, my creative cloud just prosess mounting on my mac, how can I fix this?

    pit stop halfway through the installation, my creative cloud just prosess mounting on my mac, how can I fix this?

    Hi Jacco,

    Please see:

    Re: adobe creative cloud Office installation does not install.

    Creative cloud Installer hangs

    I hope this helps.


    Megha Rawat

  • ID_ERR_NOTINSTALLVALZ_MESSAGE during the installation of VAP on Win XP


    I wanted to install the Toshiba value added package that has been designed for my Vista laptop (that I downgraded to XP), to work on my new install of XP. So no surprise, the installer wouldn't let me continue with the installation.

    So just that to see if it was possible, I used Orca to modify the .msi file and delete the launch condition that wouldn't let me install. I found and deleted and saved the new .msi file and the installation worked... until the end when everything was recorded. It gave the error 'ID_ERR_NOTINSTALLVALZ_MESSAGE '.
    I tried to find where in the .msi file this error is called or maybe its a few symbolic link?

    Something like "_MESSAGE ID_ERR_ [errorXXX]. Someone at - it ideas?
    Check the attachments for the Visual elements. Really, I wanted to release Toshiba package for XP, or at least the flash card utilities, so I can use my FN keys!

    (1) 2). 3). 4).

    Thank you.



    Some people have posted this error message and the solution was an update of the BIOS.
    But I doubt that this will help you

    First of all this PPV package was designed for Win Vista and not for Win XP and, therefore, I don t think that it runs on the laptop with Win XP, even if you changed the installation program.

    Welcome them

  • can someone walk me through the installation of windows 98 and then upgrade (SE) then the upgrade xp off that?

    any help would be appreciated - we could even make it through the registration form if it would make it easier

    You don't need to install 98 98SE then XP!  Just start with XP and when he wants to for validation qualification just previous OS Exchange temporarily the XP for the 98 or 98SE CD-ROM and then swap back the XP disc to continue.  You can also do the same thing with the ISO Images as well.

  • OfficeJet Pro 7555 the analysis issue with a Win 8 64 bit OS

    I have a new Dell with Win 8 64 bit OS.  I downloaded the new full version of the software on the site of HP for HP Officejet Pro l 7555 printer support.  Software installed and when you scan a multi page doc, scan will stop dead usually on the second or third page.  Then, the process seems to weigh and I then use the Task Manager to close the application.  It will not start scan again until I unplug printer, reconnect and restart.  To try another scan the same error occurs.  I reinstalled the software twice.  I could use some help.  Thank you

    too_hot, we are looking for a show with a sweep to the right? Interestingly, it hangs at half way through. What this when you make a copy of several page of the machine directly?

    First round of this diagnosis:

    Then we go to reinstall the software using a specific methodology.

    First of all, if you use a USB cable, be sure to remove it. Do not plug it in again until the software instructs you. Through devices and printers, programs and features and issues Device Manager and make sure that all copies, files, and programs related to the printer are removed. As indicated, and then restart the computer.
  • installation of HP 1022 win 7-64 bit

    I am unable to get the installation package to exceed the plugin cable

    I replaced the printer cable, but the program does not recognize the printer for installation

    My operating system is win 7 64 bit on a computer laptop dell i5 at dock

    all ideas

    I was able to put the generic program on but there not always recognize it then I found a local print driver for a hp 1020 and installed itt against windows 7 and it works perfectly

    Since it is a basic laserjet b & w

    Thanks for your help with you that I couldn't be led to a difficulty

  • This is the 1935 error once again, the installation of Norton Ghost Windows 7 64 bit

    Hi, I say 'yet' because it's a frequently asked question, unfortunately with no viable solutions.

    I installed Norton Ghost 15 on this machine 3 years ago. No problems. Today, when you pull up the ghost, she suddenly want to run the MSI installer for some reason any and then complains about something. Unfortunately I got a copy of the error. I just uninstalled completely, using the Symantec removal tool.

    When you try to install Norton Ghost again, I get this:

    I unchecked .net framework 3.5 in Windows features, rebooted, checked again and rebooted. I installed Microsoft C++ 2005 and 2008 Redistributable. This I did because another post suggested to do this.

    I also activated the journal feature detailed in the Windows installation program and get a huge file full of data, which tell me what I can use. Yes, something went wrong shot, but in this (these) file (s) there is no special section that stands out in a way that tells me that what in fact was wrong.

    Now, is say, not possible to obtain information in plain language? Saying that the Assembly is absent, this file is missing and so on. Because obviously something is not here that should be there, who were 3 years ago, when Norton Ghost installation went flawless.

    Or is it something else? "An error occurred during the installation of assembly component", which component? And what is normally the cause of this problem, which will normally not when an assembly component cannot be installed?

    My question basically goes like this:

    How can I know what is the real error? Assembly that is missing, have what is missing? The blind approach isn't trying for me, there must be a scientific way of this approach!

    Any help appreciated!


    OK, I found the solution:

    Error 1935 resolved

    Big - just install Ghost until the error message. Do NOT click OK, instead, use task or much better, Manager procedure such as SysInternals Monitor to kill all processes of msi windows installer and everything that has nothing to do with Norton.

    Ghost 15 is now installed and you can register and use it.

    Problem is, there is a current cancellation, who will run the next time you want to install (all) application.

    Delete these registry keys:




    Now, everything should be good, at least it looks so here!

    Detective Conan.


  • 4540 proBook s product C9K7O ID: Device Drivers not installed during the installation of Windows 7 Home Premium 64-bit

    I had to reinstall Windows 7 Home Premium 64 bit operating system and some of the equipment not recognized and therefore, the drivers were not installed. Can you tell me the correct drivers? That's what I see in Device Manager:

    Here's the driver page.

    There is a full menu of Windows 7 just pull down the menu for Windows 7 Home Premium 64 bit drivers.

    The Base system is the JMicron card reader.

    Ethernet is Realtek gigabit

    USB is Intel USB 3.0

    1 unknown is 3D Driveguard

    2 stranger's validity

  • iTunes - stay on Win 7 64 bit upgrade, win 10 64-bit

    I am running Win 7 64 bit on an older PC (disputed material 4 GB memory limitation). I have an iPhone TO an ipad mini and an old ipad.

    Specifically regarding iTunes - should I stay with what works fine now (Win 7 64-bit) or take advantage of the free upgrade (?) to win 10 64 bit.

    Yes, I know... a little late to ask this question. I keep procrastinating.  I search for related positions, did not find anything that general.

    If you decide to improve see your iTunes backup for Windows with SyncToy library for a backup plan proposed. iTunes seems does not fare terribly well during an upgrade on Windows 10 site so it might be an idea to uninstall all Apple software before upgrading, and then reinstall later. For more tips, see troubleshooting problems with iTunes for updates of Windows .


  • Since the installation of FF36beta to win 10, saving images has problem


    Installation FF36beta, recording images having the problem, so when I select the folder and click on save, it will goes to savings but not saved and all time show 'unknown time remaining' and not made progress. but when I close Firefox, the next performance after a few moments, the image will be saved.
    I have tried to find the answer for fixing, clear history of downloads, disabling the addons Manager download, but are not fixed.

    I use windows 10 and since I installed windows 10, my browser FF 36 beta + updates.

    the problem has been fixed in the beta of FF 36 10

  • During the installation of adobe in Win 7 products I get this error: "certificate authentication failed.

    Windows 7 Edition using Home Premium.  Had Adobe Reader and Flash work and then had problems to update.  Uninstalled all Adobe products and now cannot re - install.  I get the error "certificate authentication failed.  Other proposed help sites enter gpedit.msc but it is not installed on my machine (not available with Win 7 Home Premium, I understand, $220 upgrade to Ultimate... :-(


    Step 1: Run the fixit to solve the problems of the uninstalling and reinstalling:

    Solve problems with programs that cannot be installed or uninstalled

    Step 2: I suggest to try a clean boot and install.

    How to troubleshoot a problem by performing a clean boot in Windows Vista or in Windows 7

    Note: After installing windows update, follow step 7 in the link provided to return the computer to a Normal startup mode

    To further support contact Adobe support to improve assistance to this topic:

    The video problems with Internet Explorer

    It will be useful.

  • I just bought a new PC and Adobe Acrobat Pro DC.  Has gone through the installation process, but my computer shows that Acrobat Reader DC and not Pro DC.  What should I do?

    Adobe Acrobat Pro DC at Best Buy bought and installed on the new Dell PC.  However, my PC says "Acrobat Reader DC" not Acrobat Pro DC.  What should I do to get the version of what I bought on my PC?


    Please get on your system in the program Acrobat Pro DC categories, if this isn't there, then installation using this link Download Adobe Acrobat products. Standard, Pro | DC, XI, X.

    Kind regards

Maybe you are looking for