Throughout the world subscribe member list?

Similar Questions

• Check the spelling in the world

  Since last year, I've been shooting a lot, a lot of typos. I'm not sure why, but I often have to type 'In' when I want only to type 'I '. Often, I hit the SHIFT key.  More strange, it's "n ot" appears when I want to type "to". In any case, because of this problem, I really need spell check. My question is, is it possible to have something like spell-checking, where and when I type something in my computer? Apple Mail is no problem, no Apple Community Forum when I remember that there is a spell checker here. I am looking for a program that has many more, say, everything typed in Safari. Is there something like this?

  Another thing I would like is something like the top of this page and the section font on Apple Mail. Yes, I would like to be able to change the fonts and use the underscore, redact, etc.. IN THE WORLD. Now, maybe it's good obviously impossible for people who know these things here, but I'm not one of them, that is why I ask. Can it be done? If so, how?

  Well, it was at the top of the page when I was typing my message. What I wanted, it was this:

  "BOLD" (Ctrl + B) Italic (Ctrl + I) Underline (Ctrl + U) Bar Unordered list Classified in list Inserting Image Insert video Insert a link

  Yes, that's her sorta: advanced a toolbar.

  {#advanced.toolbar} "BOLD" (Ctrl + B) Italic (Ctrl + I) Underline (Ctrl + U) Bar Unordered list Ordered list Inserting Image Insert video Insert a link Emoticons Quote the previous Message Toggle correcting spelling Alternate HTML mode

• Combining unlimited minutes in the world with the United Kingdom 100 minutes

  I'm subscribing to unlimited minutes in the world, but I also call a lot of UK mobile phones which are not covered. Is it possible also to buy the United Kingtom 100 minutes and if so, with the combination recognize that fixed UK are not deducted from these 100 minutes be they planned in the unlimited world-wide. Or should I set up 2 different Skype accounts to be able to do this?

  Hello and welcome to the Skype community.

  You don't need 2 accounts. Your first option will work.

  TIME ZONE - US EAST. LOCATION - PHILADELPHIA, PA, USA.
  
  I recommend that you always run the latest version of Skype: Windows & Mac
  
  If my advice helped to solve your problem, please mark it as a solution to help others.
  Please note that I usually do not respond to unsolicited private Messages. Thank you.

• The music does not list CD imported under artists on my iPhone

  I lost so much time just trying to get my existing iTunes visible/playable music.  I have imported CDs into iTunes, sync my iPhone and iPad but they do not appear in the recently added and do not appear in the title of the artist. For example the Glynne Jess, I cry when I laugh album has any, but in the artist list under Glynne Jess I can only see and play one (Hold My Hand) previously downloaded from iTunes.  When the album of newly added disappearx, so I am unable to play because he is not visible anywhere else.  Also when I sync, iTunes says it copied album art, but it didn't.  I don't see the icon of music note double for each album rather than the correct images. The online guide to music gives detailed instructions on the use of music on devices to play existing tracks to iTunes. It focuses just on joining Apple music and how to use it, I don't want to do. I want to just keep using iTunes the way I always have.

  I tried to put this issue on the world of music, but when I clicked on the Post, I get the error:

  "You are not allowed to create or update this content."

  Why am I not allowed to post on this part of the community?

  12 iTunes for Windows: importing music and video already on your computer

  http://www.Apple.com/Asia/support/iTunes/Windows/tutorial/aciTunesPc_t2.html

  Move content from iTunes on your computer to your iPhone, iPad or iPod touch - Apple Support

• How do I know which programs to take off the windows Installer CleanUp list?

  Windows Installer Cleanup of

  * original title - how do I know which programs to take off the windows Installer CleanUp list? I don't want to uninstall or remove a program that I always use currently__ *.

  Description of the Windows Installer CleanUp utility
  http://support.Microsoft.com/kb/290301 (MS Office only - replaced by the 'Fix It' utility)
  (Note: the Windows CleanUp utility has been replaced by the "Fit It":http://support.microsoft.com/fixit/ )

  The Windows Installer Cleanup utility:
  It was created to correct software installations that failed during the installation process and leaving a bunch of files (including a file name that ends with an extension .msi (= MicroSoft Installer .msi). For example an installation failed MS Office (note I said "failed").
  See: http://office.microsoft.com/en-us/help/HA011185721033.aspx

  Also if when you installed MS Office you decided at the time you had no need of Power Point and chose not to install it. You find out later you need to make a Power Point presentation, insert the Office CD and try installing PowerPoint and it causes an error.

  The tool using Windows Installer Cleanup will remove damaged installation files (located in C:\Windows\Installer). You then install Office and Power Point, once more, as they are not more present in the list of programs in the Add/Remove Control Panel. But at least this time Office and Power Point will install without errors as the Windows Installer Cleanup utility did what it was designed to do.

  The unfortunate side effect of the cleanup tool is when you select and delete software that works correctly you then will no longer be able to install this software because it is no longer in the Add/Remove Programs list.

  Now as to why there is so many files in the C:\Windows\Installer:
  You will find lots of them. MSI files belong to software such as Java, Microsoft .NET Framework software AV, Norton Ghost, file downloaded during a Windows Update session and so on. It would seem that some software will clean up after itself and deletions, this is the file that were in the folder C:\Windows\Installer. Windows Update failure will create and leave the folders and files behind every time that you try to install the update and so you could end up with a large number of files taking up disk space.

  It could also be a lot of files (is most needed) orphans.
  If you still have the original Windows Installer Cleanup utility, and then by using the msizap (msizap g!) command removes all cached Windows Installer data files that have been orphaned.

  JS
  http://www.PAGESTART.com

  Never be afraid to ask. This forum has some of the best people in the world to help.

• EXPAND WIRELESS SIGNALS THROUGHOUT THE BUILDING

  Hai everything;

  I have a broadband connectivity in a single room of a building (the Palace of a member of the royal family). The owner of the Palace asking to do wireless throughout the building, with using all the wires. It is ready to buy any type of product, but does not use network cables. The one you suggest a solution with precision. I think that mesh without thread is a solution, but I'm not familiar with that.

  You can go for WRVS4400N.

• Description and screenshots of my two apps are missing from the world of the BB app on Z10

  I have two applications: X Lite and Pro X-Phone phone. I can find in the world of BB on Z10, but the description and screenshots of both applications are missing in app details screen. I tried on other Z10 and it's the same. However, everything is ok in the web world of BB on my PC.

  Nobody knows the reason or the place where the problem?

  Thank you.

  This is a known issue, we all see that if we have a specific application installed.

  I forgot if they said it is already solved in the next version, but it is without a doubt on their list of priorities.

• My computer hangs for 15-20 seconds many times throughout the day, suggestions to fix this?

  It seems no matter what I do on the computer, it will freeze for 10-15 seconds at a time, then run again the OK for a bit, then gel to the top.  This happens continuously throughout the day.  Any suggestions on what could happen?  I ran checks on the computer, but all system controls came out OK.

  It could be a sub-process or application that runs in the background
  and taking all the CPU resources.

  To find and view what could be the problem, try Process Explorer:
  http://TechNet.Microsoft.com/en-us/Sysinternals/bb896653.aspx
  SysInternals Forums: http://forum.sysinternals.com/

  Worth reading: the process system CPU spikes
  http://blogs.technet.com/markrussinovich/archive/2008/04/07/3031251.aspx

  Once you have Process Explorer installed and running:
  In the task bar, select view and check:
  'Show the process tree' and the options 'display the lower pane '.
  Move the cursor of your mouse over any column in the right pane and
  Make a right click and check the following boxes:
  "Command line" and "Version".
  Then expand the process named "Explorer" (click the plus sign +)
  In the left named "CPU" column, look for any high CPU usage.
  Then click on the CPU column to sort processes by CPU usage %
  (Highest to lowest).

  You can also hover and check any spike point or up/down in the chart of the CPU.

  Move the cursor of the mouse on any process,
  You should see a pop-up window with some detailed info.
  Then the mouse on the process using most or all the CPU %.
  Then click on this process to select,
  Now that it is highlighted, right click and select the options listed:
  "Online search".
  This should bring that out there on the web about this process.
  You can also double-click any process to open a more detailed
  "Properties" window

  Note: some entries such as explore, System/Services and Svchost
  To be expand to view details (sup process),
  in this case, click on the + to the left of the entrance.

  Another method when you use Process Explorer
  is to double click on the graph just below the menu bar.
  This will open the "System information" window, which has a larger screen
  of all the three graphs. Move your mouse over any Picot in the
  Graphic of the use of the CPU to see what process/application or service is the cause
  earworm.

  Another available tool is: RAMMap
  http://TechNet.Microsoft.com/en-us/Sysinternals/ff700229.aspx

  J W Stuart: http://www.pagestart.com

• Purchase of blackBerry Smartphones are not in my area of the world

  2 games I bought are not in my area of the world on my phone and one of the 2 same never finished downloading

  When I try to purchase them again that States that I bought them already and reconnection to my part of the world and the redownload, but they are not listed to do this. Please help as I feel ripped off the coast.

  Hello!

  To reinstall your applications, please follow this section of the AppWorld user guide:

  • http://NA.BlackBerry.com/eng/deliverables/7268/re-install_an_item_on_a_different_device_643962_11.js...

  For more information, registration keys, see this KB:

  • http://www.BlackBerry.com/BTSC/KB18646

  In addition... RIM released version 1.1.0.15 AppWorld... it is highly recommended to be on this version.

  If this does not work, then your application must be sent as follows. Go to this address:

  • https://www.BlackBerry.com/CSOHelp/index.do?ft=generic

  and complete the form. Use, in the "Please select a component:"on the ground, AppWorld billing/payment selection. "

  See you soon!

• Windows Media Player cannot play the DVD because the disc prohibits playback in your region of the mistake of the world.

  Original titile: burned disc will not play

  I burned a photo slide show and added music.  However, when I put the disc playing, a window pops up that says "Windows Media Player cannot play the DVD because the disc prohibits playback in your region of the world.  You must obtain a disc that is intended for your geographic region. "I bought the discs in my geographical area, so why didn't he play?  Any help would be appreciated.

  Hello Brian Dunbar,.

  I suggest to change the Device Manager DVD player region settings and check if this solves the problem.

  Follow these steps:

  a. click the Start button.

  b. management of devices of the type in the search box and press on enter.

  c. develop CD-ROM/DVD-ROM drives.

  d. right-click on the DVD-ROM and select Properties.

  tab select DVD Region e...

  f. Select your region the list form and click OK.

• BlackBerry new Smartphones come into the world of blackberry...

  ... so please be gentle with me

  I just joined the world of blackberry with a Curve 8520 and have some very simple questions that I see not listed in the FAQ

  First of all, as a veteran of the PC and Intel server world, I am always very reluctant to update things like PC BIOS and updates of operating system even without good reason, but I suspect on my BB, that the OS is a bit outdated, as it was delivered. When I am connected to Desktop Manager for the first time, he gave a huge long list of updates that were available.

  So the first simple question is - is it safe and the thing that is normally done to keep EVERYTHING up-to-date, or do you tend to follow the philosophy "only update if something is broken? And what are the risks of updating? They don't? Failures are recoverable? I don't want to end up with a handful of useless crushed raspberries...

  Another quick question is on Wi - Fi - if I am in an area where I have a mobile network connection AND a WiFi connection, which takes preference for things like browsing the web? I expected to be abe to set up some sort of priority, but through a Wi - Fi connection if the signal is there? What happens if there is no network connection mobile - things to work with JUST a Wi - Fi connection and which rely on a mobile network? I guess, for example, that BBM uses mobile network services and does not work over Wi - Fi?

  Thanks in anticipation...

  I have updated to 6 DM and have had no problem.

  The interface is different on the new version and you may need to look in different areas.

  But for the most part, it works for the most part the same.

  Best bet is to just play with it and see if you like it, otherwise, you can re-download the 5.0

• I have an a box opened with Adobe.  Why cat would be closed at midday on a Tuesday? How in the world I can thanks to their?

  I have an a box opened with Adobe.  Why cat would be closed at midday on a Tuesday? How in the world I can thanks to their?

  To the link below, click on the still need help? the option in the blue box below and choose the option to chat...

  Make sure that you are logged on the Adobe site, having cookies enabled, clearing your cookie cache.  If it fails to connect, try to use another browser.

  http://helpx.Adobe.com/x-productkb/global/service-b.html ( http://adobe.ly/1d3k3a5 )

  This forum is mainly for questions about the download and installation.  If your problem is to download and install then you should fill in the details of it so that the correct contact information may be offered.  Apart from what the cat can be a difficult animal to tame so follow the advice of cookies/browsers and keep at it.  If all else fails try to send a message private to any members of the staff are listed at the top of the page view of all Participants and they might be ready/capable of organizing the contact.

• How to create a CS5 ZXP throughout the CC2014 using ucf.jar

  Hello world

  I use a version of maven to generate a CS5 ZXP throughout the CS6 for InDesign. Now, I would like to add CC and CC this ZXP 2014, while I have a universal ZXP for all my versions supported.

  I use the ucf.jar to generate my current ZXP. I tried to add my mxi CC and CC2014 to install on these versions.

  The ZXP generate well and can be installed without any error in the installation of signage. But when I run the application InDesign CC 2014 for example, my native plugins behaving oddly.

  I noticed in the technical notes on the FCU, which mentioned versions are until CS6:

  Adobe Exchange

  I've seen other technical notes speak ZXPSignCmd to package a ZXP, but with do not mention anything on a supported version:

  http://wwwimages.Adobe.com/content/dam/Adobe/en/DevNet/creativesuite/PDFs/SigningTechNote _ CC.pdf

  I tried my extension with the UCF package, but InDesign CC 2014 seems to not work properly with installed extension once installed. I noticed the symbolic links in plugins installed here where it is replaced by the sharp the link file.

  I tried my extension with ZXPSignCmd of packaging, but Extension Manager CS6 tells me that the ZXP does not contain a valid signature.

  Not there at - it no way to create a universal ZXP works on all these versions?

  Hello world

  I had the chance to talk to Fraser Gregor, developer at Adobe involved in the development of tools of ZXPSignCmd. He told me that it was impossible to generate such ZXP this way.

  UCF.jar is a tool for InDesign CS6 and earlier versions. ZXPSignCmd was designed for the CC and latter versions. The solution, he offered me was to have a ZXP for any version under CS6 and a ZXP for any version of the latter as CC. Then he told me to have a ZXP wrapper to hold both of them. As a result of this way, I can have a universal ZXP.

  It's a little more work, but it should work. To create the universal ZXP, we can use ZXPSignCmd.

• Dynamic entity member lists using UD1 and UD2

  Hello fellow gurus HFM:
  
  
  I created dynamic member lists to get all the members of the dimension entity with membership UD1 UD2, such as specified in the script.
  
  Lists of members, as all appear in HFM, but when I try to select, I get a runtime error. I'm trying to choose in the selection of the members of a data form (in the same dropdown menu with lists of different system for entiites, like the hierarchy members, descendants, etc.).
  
  In my view, that it comes to the standard syntax. Please let me know if something is wrong with it.
  
  ElseIf HS. Dimension = "Entity" Then
  
  If HS. MemberListID = 1 Then
  ELi = Hs.Entity.List (",")
  For i = Lbound (ELi) to Ubound (ELi)
  If HS. Entity.IsBase ("", ELi (i)) = TRUE Then
  If (StrComp (Hs.Entity.UD1 (ELi (i)), "DD", vbTextCompare) = 0) then
  Hs.AddEntityToList ' ', ELi (i)
  End If
  End If
  Next
  End if
  
  Error in HFM:
  Invalid selection of members. Runtime error VBScript Microsoft VBScript runtime error, number of line 475:Wrong of arguments or invalid property assignment: ' HS. Entity.List'. 0 error reference number VBScript runtime error: {9A7697E2-75AE-4A06-9A34-B45D58022984}; Username: mark.d.smith@Native DirectoryNum: 0x80042fc2; Type: 1; DTime: 10/09/2012-17:51:16; SVR: VMHODDLPHP4; File: CHsvScriptEngine.cpp; Online: 392; Worm: 11.1.2.1.103.3505; NUM: 0x80042fc2; Type: 0. DTime: 10/09/2012-17:51:16; SVR: VMHODDLPHP4; File: CHsvDSMemberLists.cpp; Online: 2722; Worm: 11.1.2.1.103.3505; NUM: 0x80042fc2; Type: 0. DTime: 10/09/2012-17:51:16; SVR: VMHODDLPHP4; File: CommonMetadataInternal.cpp; Line: 461; Worm: 11.1.2.1.103.3505; NUM: 0x80042fc2; Type: 0. DTime: 10/09/2012-17:51:16; SVR: VMHODDLPHP4; File: CHsvEntities.cpp; Line: 338; Worm: 11.1.2.1.103.3505; NUM: 0x80042fc2; Type: 1; DTime: 10/09/2012-17:51:16; SVR: VMHODDLPHP4; File: CCommonDimension.cpp; Line: 1015; Worm: 11.1.2.1.103.3505;

  Hi Mark,

  Please check the quotation marks after Entity.List. It should be ' ","

  Kind regards
  S

• How to share an associative array throughout the entire instance?

  Hi all
  
  I have an associative array containing a lot of data and it would barely change, I want to keep in memory and share all throughout the entirety of an instance and make sure that all the sessions for all users, get the same table associative, is - it possible?
  
  Thanks in advance.

  >

  I just want to keep it in memory and share them throughout the entire instance and make sure that all sessions of all users get the same associative array, is it possible?

  Why do you want to keep in mind?
  Will using a table for it, who has access frequently, almost will always be in the buffer cache, performance of the cause of the problems for you?

  The only other way to keep the data in memory in the world FLEURIDAS to all database sessions is to use the global application context functionality. With which you can store [name, value] pairs in memory and easily (read) access using integrated SYS_CONTEXT.

  Toon