Throuput VPN on a 2651XM router

Where can I find this info?

Also, I got the used router (for nearly nothing $) but I know it's a value of some $$$. Where can I find out what model it is exactly? 'show version' doesn't show much.

Oh sorry, pasted the link partner. This link doesn't seem to be available on a non-partner unfortunately link, so here's a copy of the relevant pieces of her:

--------------------------------------

AIM-VPN/BPII, is only supported in the Cisco 2600XMs. It has support for DES/3DES and AES (optimized for the AES128 only) as well as layer 3 Compression (IPPCP). This module requires ZJ Cisco IOS version 12.2 (15) and later versions.

AIM-VPN/BPII - MORE is only supported in the Cisco 2600XMs. AIM-VPN/EPII-PLUS is supported in the 2691 and 3725 only. The BPII-PLUS and EPII-PLUS supports DES/3DES and are optimized for all key AES (AES128, AES192 and AES256) with Layer 3 Compression (IPPCP). These modules are supported in 12.3 (5 c), 12.3 (6) and later for the releases of the pipe major and 12.3 (7) T and later for releases of T.

Q. What is the function executes the VPN Module?

A. the Module VPN of Cisco 1700, 2600, 3600, and 3700 Series optimizes the platform for the IPSec VPN. Module accelerates not only the triple data standard (3DES) encryption and data (a) standard encryption, advanced encryption standard (AES) algorithms used in IPSec, but it handles many other tasks related to IPSec: hash, key exchange and storage of security associations. In doing so, the VPN module releases the Cisco 1700 series processor, 2600, 3600, and 3700 to run another router, voice and firewall features.

Q. What is the maximum performance DES/3DES/AES-128 IPSec with packages of 1 400 byte for the Cisco 1700 series, 2600, 3600, and 3700 using the VPN Module?

A. Cisco 2650/51XM with AIM-VPN/BPII or AIM-VPN/BPII-PLUS will give 10 Mbps throughput with traffic IMIX, 22 Mbpsthroughput with the packet size of 1400bytes and support 800 tunnels.

Q. What is the maximum performance of the IPSec AES-192/256 with IMIX packages for Cisco 1700 series, 2600, 3600, and 3700 using the VPN Module?

A. Cisco 2650/51XM with AIM-VPN/BPII will give 8.5 Mbit/s throughput with traffic IMIX for AES-192 and 256. BPII-MORE will give around 10 Mbps performance.

-----------------------------------------

In addition, you should know that this card was that EOL would be according to:

http://www.Cisco.com/en/us/products/HW/routers/ps274/prod_eol_notice0900aecd802d3d0b.html

It is still supported until 2010 and will work well for you, it is simply not fast enough with AES-192 and AES-256 as the version MORE than the same card, which was hardware-optimized especially for large key sizes. If you use 3DES or AES-128, then there is no difference in performance.

Tags: Cisco Security

Similar Questions

Multiple VPN connections using 871 router

Hello

I have the cisco router 871 at the site of the retail that connects to the corporate site. I also want to connect a device to the sharing network partner, but it needs to connect to their virtual private network. Is it possible to configure the 2 VPN connection to 2 different company sites in this scenario?

Thanks for your help.

Umesh.

Hello

You can configure multiple VPN tunnels on the router (whether on the same interface or different interfaces).

You can then perform the traffic from a tunnel in another tunnel, if you must do the same.

Federico.

Cisco IPsec VPn via a BT router

Hi all

A customer comes to buy a Cisco UC520 and is eager to VPN in the system with its IP communicator, do you know what are the settings that I have to configure it to allow the VPN through the BT router?

Is this just a port before I need or is there some other parameters.

Thank you

Nathan

Hi Nathan

Do not have much with BT routers but what follows the document object should help

http://btbusiness.custhelp.com/app/answers/detail/A_ID/9445/~/how-do-i-set-up-port-forwarding-on-the-BT-business-hub%3F

Ports for VPN traffic are udp 500, 4500 & 10000

It may be useful

Problems with VPN on a PAT router

Hello

I have problems to make my VPN to work. I read through various examples of configuration, but don't always have it work properly.

Scenario: connection with the Cisco VPN Client to my router from outside.

Router works like NAT/PAT overload. Internet: Internal FA0/1 network: FA0/0

Problems: connection is working without problem, but I can't access anything in the network behind the router. Some hosts ping sometimes works, sometimes doesn't.

Does anyone have an idea of what could be the problem and what wrong with my setup?

Thanks in advance!

Here is my configuration:

Current configuration: 5817 bytes
!
! Last modification of the configuration at 14:41:13 CEST Saturday, July 3, 2010
!
version 12.3
horodateurs service debug uptime
Log service timestamps uptime
no password encryption service
!
router01 hostname
!
boot-start-marker
boot-end-marker
!
enable secret 5 - CENSORED-

activate the password - CENSORED-

!
clock timezone THIS 1
clock to summer time it IS recurring
AAA new-model
!
!
local USERLIST of AAA authentication login.
local GROUP AAA authorization network
AAA - the id of the joint session
IP subnet zero
IP cef
!
!
!
Max-events of po verification IP 100
IPv6 unicast routing
!
!
!
!
!
!
!
!
!
!
!
!
username password 0 - CENSORED - TEST

!
!
!
!
crypto ISAKMP policy 10
BA aes 256
preshared authentication
Group 2
the local address ADDRESSPOOL pool-crypto isakmp client configuration
ISAKMP xauth timeout 60 crypto

!
Configuration group customer isakmp crypto GROUP
-UNCENSORED - key

pool ADDRESSPOOL
ACL 150
!
!
Crypto ipsec transform-set esp - aes 256 esp-sha-hmac SET
!
crypto dynamic-map 10 DYNMAP
Set transform-set
market arriere-route
!
!
list of authentication of card crypto client DYNMAP USERLIST
list of crypto isakmp DYNMAP card authorization GROUP
crypto card for the DYNMAP client configuration address respond
card crypto DYNMAP 10-isakmp dynamic ipsec DYNMAP
!
!
!
!
!
!
interface FastEthernet0/0
IP 172.16.0.250 255.255.252.0
IP nat inside
automatic speed
full-duplex
!
interface FastEthernet0/0.93
encapsulation dot1Q 93
IP 172.20.2.5 255.255.255.252
!
interface Serial0/0
no ip address
Shutdown
no fair queue
!
interface FastEthernet0/1
DHCP IP address
NAT outside IP
automatic duplex
automatic speed
No cdp enable
card crypto DYNMAP
!
interface Serial0/1
no ip address
Shutdown
No cdp enable
!
!
local IP ADDRESSPOOL 172.17.0.100 pool 172.17.0.150
IP nat inside source list 1 interface FastEthernet0/1 overload
IP nat inside source static tcp 172.16.1.51 80 interface FastEthernet0/1 81
IP nat inside source static tcp 172.16.2.4 2909 interface FastEthernet0/1 2909
IP nat inside source static tcp 172.16.2.1 3389 3389 FastEthernet0/1 interface
IP nat inside source static tcp 172.16.1.51 50000 interface FastEthernet0/1 50000
IP nat inside source static tcp 172.16.1.51 52000 interface FastEthernet0/1 52000
IP nat inside source static tcp 172.16.1.51 52001 interface FastEthernet0/1 52001
IP nat inside source static tcp 172.16.1.51 52002 interface FastEthernet0/1 52002
IP nat inside source static tcp 172.16.1.51 52003 interface FastEthernet0/1 52003
IP nat inside source static tcp 172.16.1.51 52004 interface FastEthernet0/1 52004
IP nat inside source static tcp 172.16.1.51 52005 interface FastEthernet0/1 52005
IP nat inside source static tcp 172.16.1.51 52006 interface FastEthernet0/1 52006
IP nat inside source static tcp 172.16.1.51 52007 interface FastEthernet0/1 52007
IP nat inside source static tcp 172.16.1.51 52008 interface FastEthernet0/1 52008
IP nat inside source static tcp 172.16.1.51 52009 interface FastEthernet0/1 52009
IP nat inside source static tcp 172.16.1.51 52010 interface FastEthernet0/1 52010
IP nat inside source static tcp 172.16.1.51 52011 interface FastEthernet0/1 52011
IP nat inside source static tcp 172.16.1.51 52012 interface FastEthernet0/1 52012
IP nat inside source static tcp 172.16.1.51 52013 interface FastEthernet0/1 52013
IP nat inside source static tcp 172.16.1.51 52014 interface FastEthernet0/1 52014
IP nat inside source static tcp 172.16.1.51 52015 interface FastEthernet0/1 52015
IP nat inside source static tcp 172.16.1.51 52016 interface FastEthernet0/1 52016
IP nat inside source static tcp 172.16.1.51 52017 interface FastEthernet0/1 52017
IP nat inside source static tcp 172.16.1.51 52018 interface FastEthernet0/1 52018
IP nat inside source static tcp 172.16.1.51 52019 interface FastEthernet0/1 52019
IP nat inside source static tcp 172.16.1.51 52020 interface FastEthernet0/1 52020
IP nat inside source static tcp 172.16.1.11 80 interface FastEthernet0/1 80
IP nat inside source static tcp 172.16.1.11 443 interface FastEthernet0/1 443
IP nat inside source static tcp 172.16.1.1 25 interface FastEthernet0/1 25
no ip address of the http server
no ip http secure server
IP classless
!
enable IP pim Bennett
!
access-list 1 permit 172.16.0.0 0.0.3.255
access-list 101 permit tcp any any eq 50000
access-list 101 permit tcp everything any 52000 52020 Beach
access-list 101 permit tcp any any eq www
access-list 101 permit tcp any any eq 443
access-list 101 permit tcp any any eq smtp
access-list 101 permit tcp any any eq 3389
access-list 101 permit tcp any any eq 2909
access-list 150 permit ip 172.16.0.0 0.0.3.255 172.17.0.0 0.0.0.255
access-list 151 allow ip 172.16.0.0 0.0.3.255 all
!
SHEEP allowed 10 route map
corresponds to the IP 151

!
public RO SNMP-server community
!
!
!
!
!
Line con 0
exec-timeout 0 0
line to 0
line vty 0 4
password - CENSORED-

!
NTP-period clock 17180405
source NTP FastEthernet0/1
NTP 162.23.41.34 Server
NTP 162.23.41.56 Server
NTP 162.23.41.55 Server
!
end

Jenny,

The NAT config is a little weird, you list 1.

List 1 is everything inside. (so all traffic inside subnet must be natted).

You must create an extended access list and create the entry

IP access-l ext 195

10 deny ip LOCAL_ADDRESS LOCAL_MASK VPN_POOL VPN_MASK

1000 ip LOCAL_ADDRESS LOCAL_MASK perm all

and apply that list to NAT overload.

This gives a try and let me know.

Edit: Ouch, 12.3 Mainline... Ollllllllllllld

LAN to lan vpn between ASA and router 7200

Hi friends,

I need to configure the lan to lan between ASA vpn (remote location) and router 7200 (on our network).

<7200 router="" (ip="" add:="" 10.10.5.2)="">-(Internet) -<(IP add:="" 192.168.12.2)="" asa(5510)="">---192.135.5.0/24 network

I will have the following configuration:

7200 router:

crypto ISAKMP policy 80

the enc

AUTH pre-shared

Group 1

life 3600

ISAKMP crypto key cisco123 address 192.168.12.2

Cryto ipsec transform-set esp - esp-md5-hmac VPNtrans

map VPNTunnel 80 ipsec-isakmp crypto

defined by peer 192.168.12.2

game of transformation-VPNtrans

match address 110

int fa0/0

IP add 10.10.5.2 255.255.255.192

IP virtual-reassembly

no ip route cache

Speed 100

full duplex

card crypto VPNTunnel

access-list 110 permit ip any 192.135.5.0 0.0.0.255

ASA:

int e0/0

nameif inside

security-level 100

192.135.5.254 Add IP 255.255.255.0

int e0/1

nameif outside

security-level 0

IP add 192.168.12.2 255.255.255.240

access-list ACL extended ip 192.135.5.0 allow 255.255.255.0 any

Route outside 0.0.0.0 0.0.0.0.0 192.168.12.3 1

"pre-shared key auth" ISAKMP policy 10

ISAKMP policy 10-enc

ISAKMP policy 10 md5 hash

10 1 ISAKMP policy group

ISAKMP duration strategy of life 10-3600

Crypto ipsec transform-set esp - esp-md5-hmac VPNtran

card crypto VPN 10 matches the ACL address

card crypto VPN 10 set peer 10.10.5.2

card crypto VPN 10 the transform-set VPNtran value

tunnel-group 10.10.5.2 type ipsec-l2l

IPSec-attributes of type tunnel-group 10.10.5.2

cisco123 pre-shared key

card crypto VPN outside interface

ISAKMP allows outside

dhcpd address 192.135.5.1 - 192.135.5.250 inside

dhcpd dns 172.15.4.5 172.15.4.6

dhcpd wins 172.15.76.5 172.15.74.5

dhcpd lease 14400

dhcpd ping_timeout 500

dhcpd allow inside

Please check the configuration, please correct me if I missed something. I'm in a critical situation at the moment...

Please advise...

Thank you very much...

Where it fails at the present time?

Can you share out of after trying to establish the VPN tunnel:

See the isa scream his

See the ipsec scream his

Please also run the following debug to see where it is a failure:

debugging cry isa

debugging ipsec cry

Configure remote VPN easy on 1800 router

Hello

I want to create an easy remote VPN on my cisco router 1800 at work to be able to access my home network

using Cisco VPN client. Does anyone have the configurations for this?

My router is: 192.168.0.253

My DNS server: 192.168.0.78

My external IP address: x.x.x.250

Appreciated all help

Concerning

Here you go:

http://www.Cisco.com/en/us/Tech/tk583/TK372/technologies_configuration_example09186a00800946b7.shtml

Federico.

AnyConnect VPN Client on IOS router

Hi guys, I configured AnyConnect SSL VPN on Cisco 2811 router. It works perfectly when I login via web and customer execution of secure mobility. However, when I connect directly from the mobility client connection fails. He does not even ask me user name and password.

----------------------------------------------------------------------------------------------------

Mar 7 21:36:47.613: % SSLVPN-5-SSL_TLS_CONNECT_OK: vw_ctx: UNKNOWN vw_gw: VPN_GATEWAY i_vrf: 0 f_vrf: 0 status: successful with SSL/TLS connection distance

21:36:47.617 7 March: WV: sslvpn rcvd context process queue event

21:36:47.621 7 March: WV: sslvpn rcvd context process queue event

21:36:47.745 7 March: WV: sslvpn rcvd context process queue event

21:36:47.749 7 March: WV: entering APPL with framework: 0 x 49233618,

Buffer (buffer: 0x4925DA18, data: 0x3F57ED98, len: 1,)

offset: 0, area: 0)

21:36:47.749 7 March: WV: fragmented data App - stamped

21:36:47.749 7 March: WV: entering APPL with framework: 0 x 49233618,

Buffer (buffer: 0x4925D818, data: 0x3F2033F8, len: 242,)

offset: 0, area: 0)

21:36:47.749 7 March: WV: Appl. Treatment failure: 2

21:36:47.749 7 March: WV: server-side not ready to send.

21:36:47.749 7 March: WV: server-side not ready to send.

21:36:47.749 7 March: WV: server-side not ready to send.

21:36:47.753 7 March: WV: sslvpn rcvd context process queue event

21:36:47.753 7 March: WV: server-side not ready to send.

--------------------------------------------------------------------------------------------

====================

Here is the config:

=====================

Crypto pki trustpoint VPN_TRUSTPOINT

enrollment selfsigned

Serial number

name of the object CN = Academy-certificate

crl revocation checking

rsakeypair RSA_KEY

!

!

VPN_TRUSTPOINT crypto pki certificate chain

!

local IP VPN_POOL 192.168.7.100 pool 192.168.7.150

!

WebVPN gateway VPN_GATEWAY

IP address

trustpoint SSL VPN_TRUSTPOINT

Enable logging

development

!

WebVPN install svc flash:/webvpn/anyconnect-win-3.1.02040-k9.pkg sequence 1

!

WebVPN context VPN_CONTEXT

title "." SSL authentication check all ! connection message '<message>'. ! Group Policy VPNPOLICY functions required svc SVC-pool of addresses "VPN_POOL." SVC Dungeon-client-installed generate a new key SVC new-tunnel method SVC split include 192.168.1.0 255.255.255.0 Group Policy - by default-VPNPOLICY AAA authentication list default Gateway VPN_GATEWAY 10 Max-users development -------------------- I did not understand, why customer mobility works at the launch of the web and why it does not work directly. Any input or advice would be much appreciated Hi Giorgi, This could be related to <a href="https://www.cisco.com/cisco/psn/bssprt/bss?searchType=bstbugidsearch&page=bstBugDetail&BugID=CSCti89976" rel="external nofollow noreferrer">CSCti89976</a>. <table> <tbody> <tr> <td colspan="2"> AnyConnect 3.0 does not work with existing IOS. </td> </tr> <tr> <td> Symptoms: Customer independent AnyConnect 3.0 does not work with an existing headboard IOS. Conditions: AnyConnect 3.0 with an IOS router as the network head. Workaround solution: Use AnyConnect 2.5 or weblaunch. Update IOS </td> </tr> </tbody> </table> Could not upgrade the version of IOS? HTH. Portu.</message>

IPsec site to Site VPN on Wi - Fi router

Hello!

Can someone tell me if there is a router Netgear Wi - Fi that can form IPsec Site to Site VPN connection between 2 Wi - Fi routers via the WAN connection?

I know that this feature exists on the Netgear firewall, but can you have the same function on any Wi - Fi router?

See you soon!

Michael

I suspect that.

Thank you very much for the reply.

See you soon!

3030 router Cisco LAN to LAN VPN, can only mount router tunnel

I am unable to raise atunnel from inside my VPN concentrator 3030 (IOS 3.5.2) tunnel 3 uses Ethernet as the side private tunnel. Is there some kind of problem on the VPN 3030 internally that does not use the Ethernet IP source 3? Once triggered on the remote side, the tunnel passes and receives traffic and I can ping devices on the remote side of my private network, but I can't ping any remote device from inside the VPN 3030.

Do you mean that you can now view the tunnel of something related to the 10.255.0.0/24 network, but no ping comes from the VPN3030 itself?

When you ping the VPN3030 it will automatically use the private IP address I think. Debugging isn't warning us whatever it is the first that you attached is where the Diffie-Hellman group was incompatible. If you have passed Phase 1 but, you will see a debug on the router that is similar to the following message:

* 26 Nov 08:51:37.901: IPSEC (validate_proposal_request): part #1 of the proposal

(Eng. msg key.) Local INCOMING = 204.74.161.161, distance = 216.34.168.148,.

local_proxy = 10.1.215.0/255.255.255.0/0/0 (type = 4),

remote_proxy = 10.255.0.0/255.255.255.0/0/0 (type = 4),

Protocol = ESP, transform = esp-3des esp-md5-hmac,

lifedur = 0 and 0kb in

SPI = 0 x 0 (0), id_conn = 0, keysize = 0, flags = 0 x 4

Here you can see that the remote_proxy is 10.255.0.0, which shows that the 3030 uses this network as the source subnet. If you try and ping from the 3030 again run debugging, you will probably see the 172.16.0.0 (the private interface) as the remote_proxy.

Why is it important that you cannot bring up the tunnel within the 3030 anyway? When would you like to do this?

Routing problem between the VPN Client and the router's Ethernet device

Hello

I have a Cisco 1721 in a test environment.

A net 172.16.0.0/19 simulates the Internet and a net 192.168.1.0/24 simulates the net, the VPN tunnel must go to (intranet).

The net 172.16.0.0 depends on the router 0 FastEthernet, Intranet (VPN) hangs on Ethernet 0.

The configuration was inspired form the sample Configuration

"Configuring the Client VPN Cisco 3.x for Windows to IOS using Local extended authentication"

and the output of the ConfigMaker configuration.

Authentication and logon works. Client receives an IP address from the pool. But there's a routing problem

side of routers. Ping client-side - do not work (the VPN client statistics that count encrypt them packets, but not to decrypt).

Ping the router works too, but decrypt and encrypt customer statistics in VPN packets count progressive

(customer has a correct route and return ICMP packets to the router).

The question now is:

How to route packets between the Tunnel and an Ethernet device (Ethernet 0)?

conf of the router is attached - hope that's not too...

Thanks & cordially

Thomas Schmidt

-.-.-.-.-.-.-.-.-.-.-.-.-.-.-.-.- snipp .-.-.-.-.-.-.-.-.-.-.-.-.-.-.-.-.-.-.

!

version 12.2

horodateurs service debug uptime

Log service timestamps uptime

encryption password service

!

!

host name * moderator edit *.

!

enable secret 5 * moderator edit *.

!

!

AAA new-model

AAA authentication login userauthen local

AAA authorization groupauthor LAN

!

! only for the test...

!

username cisco password 0 * moderator edit *.

!

IP subnet zero

!

audit of IP notify Journal

Max-events of po verification IP 100

!

crypto ISAKMP policy 3

3des encryption

preshared authentication

Group 2

!

ISAKMP crypto client configuration group 3000client

key cisco123

pool ippool

!

! We do not want to divide the tunnel

! ACL 108

!

Crypto ipsec transform-set esp-3des esp-sha-hmac RIGHT

!

Crypto-map dynamic dynmap 10

Set transform-set RIGHT

!

map clientmap client to authenticate crypto list userauthen

card crypto clientmap isakmp authorization list groupauthor

client configuration address map clientmap crypto answer

10 ipsec-isakmp crypto map clientmap Dynamics dynmap

!

interface Ethernet0

no downtime

Description connected to VPN

IP 192.168.1.1 255.255.255.0

full-duplex

IP access-group 101 in

IP access-group 101 out

KeepAlive 10

No cdp enable

!

interface Ethernet1

no downtime

address 192.168.3.1 IP 255.255.255.0

IP access-group 101 in

IP access-group 101 out

full-duplex

KeepAlive 10

No cdp enable

!

interface FastEthernet0

no downtime

Description connected to the Internet

IP 172.16.12.20 255.255.224.0

automatic speed

KeepAlive 10

No cdp enable

!

! This access group is also only for test cases!

!

no access list 101

access list 101 ip allow a whole

!

local pool IP 192.168.10.1 ippool 192.168.10.10

IP classless

IP route 0.0.0.0 0.0.0.0 172.16.12.20

enable IP pim Bennett

!

Line con 0

exec-timeout 0 0

password 7 * edit from moderator *.

line to 0

line vty 0 4

!

end

^-^-^-^-^-^-^-^-^-^-^-^-^- snapp ^-^-^-^-^-^-^-^-^-^-^-^-^-^-

Thomas,

Can't wait to show something that might be there, but I don't see here. You do not have the card encryption applied to one of the interfaces, perhaps it was not copied. Assuming your description you do it, or should it be, applied to the fa0 and you are connected. Try how you ping? Since the router or a device located on E0? If you ping the router, you will need to do an extended ping of E0 to the ip address of the client has been assigned. If your just ping the router without the extension, you will get sales and decrypts that you declare on the client. Have you tried to ping from the client to interface E0? Your default route on the router is pointing to fa0? You have a next hop to affect? You have several NIC on the client pc? Turn off your other network cards to check that you don't have a problem with routing on the client if you have more than one.

Kurtis Durrett

VPN remote access with router 2610

Guys,

A router Cisco 2610 series with IOS Version 11.3 (2) software version XA4 (fc1) will support a VPN remote access VPN Clients using standard Windows (LT2P on IPSec or PPTP) via a connection of Remote LAN-based access to wide band.

I have bought this device and need an answer fast if possible.

Thank you 1 million.

Vito

The navigation feature is the ideal tool for this:

http://Tools.Cisco.com/ITDIT/CFN/JSP/index.jsp

Search by function and enter PPTP and you will see he came to 12.2 code.

Do the same for L2TP and you will see he came in 12.1 T code.

The short answer is no.

VPN on 3 routers routing RV320

I have 3 RV320 configured as a Hub & talk VPN configuration. VPN configuration everything from gateway to gateway

All 3 RVs have direct access to the internet because they are set to be the gateway instead of the router.

The problem I encounter is the 2 rays cannot see each other, but both can see the hub.

I need to configure on talking RV to create a route to reach the other spoke RV and vice versa.

Thank you.

Yes, most certainly.

You can create a VPN of mesh and all devices must be able to talk to each other. The best part is that this type of configuration is supported, so if you have problems we can certainly help you.

I hope this helps.

Cannot open an L2TP VPN tunnel behind a router 806.

This is the scenario:

My ISP provider provides pppoE.

When I connect a PC directly to the ADSL modem, I can open my L2TP VPN and VPN works fine and I am able to navigate.

When I connect the PC behind 806, I get a private pool in 806 IP and I am able to navigate, but PC, I open my VPN L2TP software utility (same as before) and cannot open the VPN.

Could you please tell me what config I shoul put in router to open the tunnel of 806 instead of op VPN software utility? The difference is that now 806 global IP gets rather od PC.

So I know now tunnel should be open from the router, but I Don t know what I have lines shlould Add.

Help, please!

I thinkl you want is VPN passthrough, the answer to that is the version of the IOS, I think IOS version 12.2 and allows VPN Passthru especially. There is no other configuration required just to 12.2 or above

Tunnel GRE / IP Sec VPN firewall between the router Cisco and Fortigate

Hello

Can I do GRE Tunnel / VPN IP Sec between Cisco router and Fortigate Firewall?

Thank you

Hi zine,.

As long as the Fortigate device support GRE over IPSEC, you will be able to create the tunnel between these 2 devices.

Here is the config for the Cisco Site:

https://supportforums.Cisco.com/document/16066/how-configure-GRE-over-IPSec-tunnel-routers

Happy holidays!

-Randy-

VPN between ASA and router

Hi all

First of all, I would like to say I'm trying to implement this on Packet trace. I would like to set up a VPN using an ASA 5505 and a Cisco router 1841 (both available on Packet trace).

The devices can ping external IP address on the other.

The problem is that the VPN is not established. If I run sh crypto control its isakmp on the SAA, he said: there are no SAs IKEv1

Configurations for both devices are attached.

No idea why it doesn't work? Sorry if it is not the right forum for this, is the first time I post. I've searched the forums and I checked some of the proposed solutions, but I have not found the answer to my problem :-(

Thanks in advance,

Patty
1. On the router, there is no crypto card. Need in a manner consistent with the SAA.
2. Your policy of phase 1 is not compatible. They settings must match on both sides (router: 3des, ASA: aes)
3. You can adjust your NAT on both devices that tunnel traffic does not get teeth. Remember that NAT is made prior to IPsec. If you do not exempt NAT traffic, then it will not match the ACL crypto more after NAT.
4. Yes, the forum is perfectly fine! ;-)

Throuput VPN on a 2651XM router

Similar Questions

Maybe you are looking for