Throws an Exception when there is no update.

Similar Questions

• Exception when starting Server EMGC_OMS1 (updated 12.1.0.2)

  Hello
  
  I just upgraded my EM 12 c R1 to R2 test environment.
  The environment runs on Windows: Server Admin and monitor targets.
  
  After the steps after installation in the migration guide, Weblogic console starts well (using % DOMAIN_HOME%\startWebLogic.cmd), but I'm having trouble to start Enterprise Manager Cloud Control console/web server.
  
  After trying to start the EMGC_OMS1 managed server in WebLogic console, I get the following:
  
  -EMGC_OMS1 State goes to FAILED_NOT_RESTARTABLE.
  -The Server Admin log show the following errors:
  

  14:33:05EMReposLoginModuleImpl 28-Sep-2012: throw LoginException: authentication failed: User. Password not supplied
  < 28 sep 2012 14:33:05 CEST > < WARNING > < DeploymentService > < BEA-290014 > < username or password. >
  14:33:07EMReposLoginModuleImpl 28-Sep-2012: throw LoginException: authentication failed: User. Password not supplied
  < 28 sep 2012 14:33:07 CEST > < error > < Configuration Management > < BEA-150035 > < an attempt was made to download the configuration for > EMGC_OMS1 server by the user with an invalid password. >
  < 28 sep 2012 14:33:13 CEST > < error > < NodeManager > < BEA-300048 > < could not start the server EMGC_OMS1: Exception when starting Server > "EMGC_OMS1" >

  I tried the following:
  
  -Write file boot.properties in %DOMAIN_HOME%\servers\EMGC_ADMINSERVER\security and %DOMAIN_HOME%\servers\EMGC_OMS1\security with the credentials for the user the Weblogic admin again.
  -Value username and password on "Parameters of EMGC_OMS1" > Configuration > Weblogic Console tab to start the server.
  
  None of them succeeded.
  
  I also compared the former (R1) installation folder with a new one for the R2, but I don't see any relevant difference.
  
  You have suggestions on what can be wrong?
  
  Thanks in advance,
  Angel

  Hi Angel,

  Please see the following doc for instructions on starting a CMS.

  http://docs.Oracle.com/CD/E24628_01/doc.121/e24473/emctl.htm#BABFEEAJ

  Kind regards
  -Loc

• PowerShell does not open, Powershell ISE throws the exception when starting

  I am running Windows 7 SP1.

  When I try to start Powershell (x 64) or Powershell window will appear for less than a second, and then disappear.

  When I try to start Powershell ISE (x 64) I get an error on the application of "the exception unknown software exception (0xe0434352) occurred in the application at location 0x7568c44d."

  When I try to start Powershell ISE I get an error on the application of "the exception unknown software exception (0xe0434352) occurred in the application at location 0xfd96adad."

  I tried to repair .net 4.5 and I tried to reinstall Windows6. 1 KB2506143-x 64.msu.

  When you try to install KB2506143-x 64.msu I get "the update is not applicable to your computer."

  When trying to make sure that the old powershell is uninstalled I can't find KB2506143 in the list of installed updates.

  This issue is beyond the scope of this site and must be placed on Technet or MSDN
  http://social.technet.Microsoft.com/forums/en-us/home
  http://social.msdn.Microsoft.com/forums/en-us/home

• PowerCLI 5.8 Release 1 throws an exception when starting

  So I decided to upgrade my PowerCLI 5.5 R2 Patch 1 to the latest 5.8, released the last week or two. (Yes, I know, I guess I decided to live dangerously, using new versions :-)))  And the upgrade installation went well. But when I run PowerCLI, I get:

  Add-PSSnapin: the initializer for type for 'VMware.VimAutomation.Storage.Interop.V1.Service.StorageServiceFactory' threw an exception.

  C:\Program Files\VMware\Infrastructure\vSphere PowerCLI\Scripts\Initialize-PowerCLIEnvironment.ps1:48 tank: 10

  + Add-PSSnapin $snapin

  +          ~~~~~~~~~~~~~~~~~~~~

  + CategoryInfo: NotSpecified: (:)) [Add-PSSnapin], TypeInitializationException)

  + FullyQualifiedErrorId: System.TypeInitializationException, Microsoft.PowerShell.Commands.AddPSSnapinCommand

  Someone knows why? I didn't update the vSphere CLI, just PowerCLI. I was still able to connect to my vCenter (I connect to my vCenter in my profile). But I don't know what will not work. I did a quick 'Get-VMHost', "Get - VM" and a few others - they are all working well.

  Value name

  ----                           -----

  PSVersion 4.0

  WSManStackVersion 3.0

  SerializationVersion 1.1.0.1

  CLRVersion 4.0.30319.18444

  BuildVersion 6.3.9600.16406

  PSCompatibleVersions {1.0, 2.0, 3.0, 4.0}

  PSRemotingProtocolVersion 2.2

  PowerCLI Version

  ----------------

  VMware vSphere PowerCLI 5.8 Release 1 build 2057893

  ---------------

  Versions of the snap

  ---------------

  VMWare AutoDeploy PowerCLI component 5.5 build 1983942

  VMWare ImageBuilder PowerCLI component 5.5 build 1983942

  License of VMware PowerCLI component 5.5 build 1265954

  VMware Storage PowerCLI component 5.8 build 2057894

  VMware PowerCLI VDS component 5.8 build 2031581

  VMware vSphere PowerCLI component 5.8 build 2031581

  VSphere VMware Update Manager PowerCLI 5.1 build 782803

  Ideas, anyone? Should I roll back to 5.5? Anyone else having problems?

  An update. We have improved our environment to 5.5 (all ESXi hosts and vCenter). Therefore, I improved my heavy client installation. So I decided to try again after update my Powershell to 5.8.

  And then everything just worked. No error at startup of Powershell. All respond as it should.

  Can't imagine why the 2 would be connected, but no matter, I am now under 5.8 on my Windows 7 workstation.

• Console of the OSB is throw the exception when I click Project Explorer

  Hello
  
  OSB Console, if I click on Explorer iam get the exception below.
  
  Exception console:*.
  Message, the server encountered an unexpected condition which prevented him from meeting the demand. *
  
  The same exception arises again when I click on the messages button as well.
  
  Thank you
  Vijay

  In my case one user was missing, he added and he solved the problem, now we are able to navigate without any problems.

  Thank you
  Vijay

• Need to throw an exception after a test of text corresponding to the openscript

  Hello

  I want to check a text using text matching test and I want to throw an Exception if the text is not there. If the text is there she must either continue normally.

  I tried this test of text matching. According to this, it's getting abandoned after

  () Web.document

  "\"/web:window[@index='0 "or @title ='Oracle BI interactive dashboards - Advance Planning']/web:document[@index='0']\" ").

  .verifyText ("Check result", "export",

  Source.DisplayContent, TextPresence.PassIfPresent,

  MatchOption.Exact);

  After this way can anyone please explain me (code)

  Concerning

  Harsha

  If you give verifyText(), script not give up failure, IE. script displays a warning text not found in HTML content

  If you give assertText(), the script will stop in case of failure.

  To throw an exception when the text is not found, use try-catch as follows...

  try {}

  Web.Window ("/ web: window [@index = '0' or @title = 'Oracle BI interactive dashboards - Advance Planning']/web:document[@index='0']")

  .assertText ("Check result", "export",

  Source.DisplayContent,

  TextPresence.PassIfPresent,

  MatchOption.Exact);

  }

  catch (System.Exception e)

  {

  failure ("could not find the export text");

  }

  
  

  See you soon,.

  Dembélé M

  [email protected]

• says that there is an update of firmware available for my 3 t time capsule. I get "an error occurred when downloading". How to find the problem?

  I said that there is an update of the firmware available for my 3 t time capsule. I get the message "an error occurred when downloading". How to find the problem? I have elcapitan 10.11.6 and capsule version 7.7.3

  Try temporarily, connect your MacBook Pro to your Time Capsule using an Ethernet connection... If not already, then try downloading the firmware again.

• The last time I used identifier apple of my father to the appstore on my macbook pro. (Now, I have my own apple ID). Sometimes, when there are apps that I want to update, a window would jump out to ask me to sign identifying apple of my father, but I want

  The last time I used my id to a friend for the appstore apple on my macbook pro. (Now, I have my own apple ID). Sometimes, when there are apps that I want to update, a window would jump out to ask me to connect to my apple to a friend id, but I want to update the application using my own apple ID. Is that what I have to use my apple ID to update the applications? Please help me!

  The last time I used my id to a friend for the appstore apple on my macbook pro. (Now, I have my own apple ID). Sometimes, when there are apps that I want to update, a window would jump out to ask me to connect to my apple to a friend id, but I want to update the application using my own apple ID. Is that what I have to use my apple ID to update the applications? Please help me!

• 6.2.16: when you try to update Itunes, I get the following error message: "there is a problem with this package of can I install."  A program required for this install to complete could not be run.  Contact your support team / packages vendo

  6.2.16: when you try to update ITunes on my Windows laptop, I get the following error message: "there is a problem with this Windows Installer package.  A program required for this teaching to complete could not be run.  Contact your supplier of staff or the package of support ".  There is no associated error code.  I've never had a previous issue with ITunes updates.  Thank you, Debbie

  Repair Apple Software Update since the programs & features Panel configuration and then try again.

  For general advice, see troubleshooting problems with iTunes for Windows updates.

  The steps described in the second case are a guide to remove everything related to iTunes and then rebuild what is often a good starting point, unless the symptoms indicate a more specific approach.

  Review the other boxes and other support documents list to the bottom of the page, in case one of them applies.

  The more information box has direct links with the current and recent if you have problems to download, must revert to an older version or want to try the version of iTunes for Windows (64-bit - for older video cards) as a workaround for problems with installation or operation, or compatibility with third-party software.

  Backups of your library and device should be affected by these measures but there are links to backup and recovery advice there.

  TT2

• Why update when there are known bugs

  I wonder constantly up-to-date when there are bugs in it, it's not logical to me at all, this 9.0 will crash after a while because it has bugs you admitted that

  Another reason for updating, it is that each new version contains security updates that are not in the other. If you can help protect your computer with Firefox (and other software like Windows) in day.

• 0x80072EFF when you perform the update from Microsoft for windows XP PRO. Microsoft Windows would load--not Internet (there!)

  I kept getting error 0X80072EFF whenever I run Microsoft Update for my Dell latitude XP pro. Windows Update would not, saying no connection, although it is. I tried some of the solutions proposed, including the installation and execution of Malwaebytes (836941), Trend Micro PRO sets a trojan virus. I also tried running ' services.msc in "-I did as suggested, but there is NO update of windows, or microsoft update services listed; the automatic update, the background intelligent transfer service and the support services are all enabled. I also download and run Microsoft FIX IT, running "DIFFICULTY IT for me. NOTHING WORKED! PLEASE HELP - I'M DESPERATE NOW. In ADDITION, whenever I search for "microsoft download" and click on it, Internet Explorer displays this web site AND other window on the home page! For Mozilla, it says. UNLISTED URL. WHAT NOW? PLS HELP!

  I finally solved the problem with the help of the people behind the software "ExterminateIt", suggested by one of the people in this forum. That software has not fixed the problem, but the engineer of the manufacturer told Envoy tool removing a software application TDSS rootkit (TDSS version 2.4.4.0) kaspersky Lab ZAO. The problem go away, and I was able to download the Microsoft Update. "Windows update also works now, and Mozilla Firefox does not display the"URL not FOUND"or: INVALID URL ', and he stopped this regular cliqueti sound from my laptop. Internet Explorer stopped showing double the home page windows, when the download window comes out. I was really impressed! Trend Micro Pro, malwarebytes and ExterminateIt, and others of CNET has failed!

  Thanks for all your suggestions!

• Is there a way to disable the automatic creation of a restore point for Windows Defender, when he made an update of definition of the window? It is for the definitions of update itself, not the option 'restore point before the scan' can I disable with a

  I want to keep only a single copy of a System Restore Point that I created mine so I know when I did and why I did it.

  With Windows Defender, I noticed that a new restore point is created whenever there is an update of Windows definitions, if I use the method of automatic or manual update.  I found that when I opened the system restore and found a new copy with description: "Installation: Windows Update.  In the history of Windows Defender, I noticed that the time corresponded to when the update the definitions file.

  I unchecked the box under Windows Defender does not create a restore point before a scan of the system.  I tried the Google search to find answers and can't seem to find someone mentioning this.  Also MS sites does not seem to explain on the restores automatic system during the update of the definitions.

  I'm also curious whether Windows Essentials will have the same problem that I am planning to use Essentials instead of Defender and thus get rid of Avast.

  Hi Dudeus,

  Yes, it is not possible to disable your system being created before windows updates restore.

  Bindu S - Microsoft Support

• Exception of null on the list pointer implementing values when there are n rows in the table

  Hi Experts,

  I use JDev 11.1.1.7.

  I have a VO that I defined a LOV with no search box. In my page, I've added it as af:inputListOfValues, but when there is no rows in the table that I will meet with NPES

  < AdfcExceptionHandler > < handleException > ADFc: when Manager application exception exception handling threw a new exception.

  java.lang.NullPointerException

  at oracle.jbo.uicli.binding.JUCtrlListBinding.findOrCreateLOVDialogIteratorBinding(JUCtrlListBinding.java:5188)

  at oracle.adfinternal.view.faces.model.binding.FacesCtrlLOVBinding.getSearchBinding(FacesCtrlLOVBinding.java:204)

  to oracle.adfinternal.view.faces.model.binding.FacesCtrlLOVBinding$ ListOfValuesModelImpl.getSearchRegion (FacesCtrlLOVBinding.java:2001)

  to oracle.adfinternal.view.faces.model.binding.FacesCtrlLOVBinding$ ListOfValuesModelImpl.getQueryModel (FacesCtrlLOVBinding.java:1612)

  to oracle.adfinternal.view.faces.renderkit.rich.SimpleInputListOfValuesRendererBase$ InternalLaunchPopupListener.processLaunch (SimpleInputListOfValuesRendererBase.java:1560)

  at oracle.adf.view.rich.event.LaunchPopupEvent.processListener(LaunchPopupEvent.java:108)

  Excerpt from JSFF:

  < af:inputListOfValues id = "xxx" popupTitle = "" search and select: XXX ""

  simple value = "#{pageFlowScope.SearchBean.xxx}" = 'true' "

  model = ' #{bindings. " XXXLOV.listOfValuesModel} "columns ="30"

  searchDesc = "Select XXX" >

  < / af:inputListOfValues >

  PageDef:

  < listOfValues StaticList = 'false' use = "LOV_XXX".

  IterBinding = "XXXIterator".

  ID = "XXXLOV" / >

  Is - this bug?

  Surprisingly, it works very well if there are lines in the table that the VO is querying.

  -Soham

  Soham,

  I think you just create this LOV page by simply moving the VO, right?

  You can select the box to tick 'Include no. Selection' in your VO, and see if that helps?

  

  See you soon

  AJ

• I have version 9 (I think) running on windows 10. Works fine EXCEPT when I try to apply automatic updates. It checks, downloads, copies the files and when it is almost by it says it has encountered an error and cancels everything. Frustrat

  I have version 9 (I think) running on windows 10. Works fine EXCEPT when I try to apply automatic updates. It checks, downloads, copies the files and when it is almost by it says it has encountered an error and cancels everything. Frustrating!

  Hi rct_nv ,

  Please provide the exact version of the acrobat application (given that no update available for acrobat 9 as its an older version)

  In addition, I wish to inform that Acrobat 9 is not compatible with Win 10 OS. Refer to this article:- Adobe Acrobat required configuration

  Kind regards

  Christian

• I have Lightroom 4.4 on my Mac laptop. It came with the purchase of a Leica camera. When I check the updates, the answer is that there is no update available. Download Version 5.7 of Adobe's Web site with no problems?

  I have Lightroom 4.4 on my Mac laptop. It came with the purchase of a Leica camera. When I check the updates, the answer is that there is no update available. Download Version 5.7 of Adobe's Web site with no problems?

  Your license for the 4.4 release will not work with version 5.7, you can download it without doubt, but if you do not have version 5.7 download then it won't do much good.  If you do not have a license for it so you won't be able to use it beyond use of the trial.