Thunderbird greys out and says does not

Thunderbird greys out and says does not, finally seems to work OK

McAfee

Tags: Thunderbird

Similar Questions

  • Lightroom CC Trying ├a import 'New' Photos and they are greyed out and say that they have already been imported, how to make their importation?

    Upgraded to Lightroom CC a few months ago and have had major problems with importation, never had any problems before. Since the upgrade I import a map is fine, next card says pictures have already been imported and that they are grayed out. I know for a fact that I matter not yet. So frustrating! Someone please help! I even turned off the 'don't do not import suspected duplicates' box and again, it will not let add me or COPY. I will attach a screenshot.Screen Shot 2015-12-05 at 9.34.04 PM.png

    Yes, I went straight from my card. I always did it that way. Not until the upgrade did I start having issues. I ended up having to download hard disk, rename and then import it. Quite unfortunate that they changed this in the upgrade, it was nice not having to move in all directions and could go straight to LR. Thank you very much for the help!

  • When I reboot after installation of service pack 2, the message comes out and says that updates are not configured correctly, returning from changes

    When I reboot after installation of service pack 2 on a computer laptop with Windows Vista Home Premium 32-bit Dell XPS M1530, the message comes out and says that updates are not configured correctly, returning from changes. Do not turn off your computer. I installed update readiness tool, but it does still every time. I tried to disable the antivirus software prior to installation.

    Hello
     
     
     
    1. how you try to install Service Pack 2?
    2. are you able to boot to the desktop?
     
     
    Method:
    Step 1: If you are able to start the computer in normal mode, then try a clean boot.

    To help resolve the error and other messages, you can start Windows Vista or Windows 7 by using a minimal set of drivers and startup programs. This type of boot is known as a "clean boot". A clean boot helps eliminate software conflicts.

    How to troubleshoot a problem by performing a clean boot in Windows Vista or in Windows 7

    http://support.Microsoft.com/kb/929135
    Please note: after troubleshooting, start the computer in normal mode.

     
    Step 2: Try to install Service Pack 2 manually.
     
    How to obtain the latest Windows Vista service pack

     
     
    If you are unable to start the computer, then you can follow this link to start the computer in safe mode.
    Start your computer in safe mode
    http://Windows.Microsoft.com/en-us/Windows-Vista/start-your-computer-in-safe-mode
     
     
     
     
    If you are unable to install Service pack 2, you can consult this article.
    Error: Failed to setup of the Windows updates. Restoration of the changes. Do not turn off your computer when you try to install Windows updates
    http://support.Microsoft.com/kb/949358
    Please note: method 2 refers about upgrade on site.  Perform a repair installation/place will not damage files and applications that are currently installed on your computer.   However, I suggest you to back up all important data on the computer before you perform the upgrade on the spot.
     
     
     
     
     
     
     

  • I bought CS3 and LR2 nine from an apple store. I just moved to a new computer and it does not allow me to copy to my new without a product key. I started a conversation and they told me that I was out of money. $700.00 CS3 and LR $199.00. It su

    I bought CS3 and LR2 nine from an apple store. I just moved to a new computer and it does not allow me to copy to my new without a product key. I started a conversation and they told me that I was out of money. $700.00 CS3 and LR $199.00. It seems of course after spending a lot of money with Adobe that it would be an easier way to take care of your customer than to spend another $900

    Help!

    Adobe programs should be installed, they can be copied from one place to the other.  If you do not have the serial numbers for these products, then you're probably out of luck to run again on any new installation.  If you have the discs, then the serial number is usually on the disc cover.

    If you purchase these items in an Apple store, they are not new... they are quite old.

    I doubt that they say anything about you being the money you spent, more likely, they say they provide is no longer support for older products and you conclude are you the money you've spent - this isn't something rare to hear - it is unfortunate, but are not uncommon.

  • Why my selection of folder and Search Options is greyed out and not selectable?

    folder and search options

    Why my selection of folder and Search Options is greyed out and not selectable?

    http://www.Vistax64.com/tutorials/84215-folder-options.html

    http://www.Vistax64.com/tutorials/75447-search-options.html

    Read the tutorials above and the 'related links' here...

    See you soon.

    Mick Murphy - Microsoft partner

  • I installed creative cloud and select filters and versions, does not come out earlier versions. I have to configure?

    I installed creative cloud and select filters and versions, does not come out earlier versions. I have to configure?

    just after the point 1/2 towards the bottom of the page is a portal showing how to install previous versions, https://helpx.adobe.com/creative-cloud/help/download-install-app.html

  • Hello! I live in Brazil, I try to buy the creative cloud to the picture and it does not work because I changed the country! I don't know what's wrong, they say to call this 1800 426 570 phone number but no work at the Brazil! Does anyone know another fo p

    Hello! I live in Brazil, I try to buy the creative cloud to the picture and it does not work because I changed the country! I don't know what's wrong, they say to call this 1800 426 570 phone number but no work at the Brazil! Does anyone know another phone number to provide payment information?

    Hi Luciano,

    Please click on the following link: Contact Customer Care

    *Remember to stay signed with your Adobe ID ( email id used to purchase the subscription ) before accessing the link above*.

    Select the exact options indicated below in the capture to get support of screen options:

    Let us know if that helps.

    Kind regards

    Sandrine Bani

  • I'm on mac, I mind open it because he says that preferences has been deleted, I reinstalled it twice and it does not

    I'm on mac, I mind open it because he says that preferences has been deleted, I reinstalled it twice and it does not

    Press Command-Option-shift and launch Photoshop. When you see the dialog box to delete the settings file, release the keys, click Yes and I hope that the preferences will be recreated.

    Gene

  • got photoshop elements 12 of qvc and its does not work (says it's a pirated software)

    got photoshop elements 12 of qvc and its does not work (says it's a pirated software)

    If not installed, install Adobe Application Manager and then try to install again.

    http://download.adobe.com/pub/Adobe/creativesuite/CC/Win/ApplicationManager9.0_all.exe

    Always the same?

    Try to install using the download configuration file:

    https://helpx.Adobe.com/Photoshop-elements/KB/Photoshop-elements-downloads.html

    Reference:

    Warning: "Adobe software real failure of Validation...". » | Windows

  • I can't Logg in, I typed the right Mail (Gmail) and password. but it says: Adobe Id and password does not match. Try again.

    I can't Logg in, I typed the right Mail (Gmail) and password. but it says: Adobe Id and password does not match. Try again.

    Forget it, it's working now

  • I have CS5 and a d-600. I would like to use camera raw, but does not. I downloaded CR 7.3 and still does not. What I need to upgrade to CS6... or just throw everything out the window and get rid of my d-600?

    I have CS5 and a d-600. I would like to use camera raw, but does not. I downloaded CR 7.3 and still does not. What I need to upgrade to CS6... or just throw everything out the window and get rid of my d-600?

    It allows you to use your RC files, Adobe - Adobe Camera Raw and DNG Converter: for Windows

    Camera Raw: How to use Adobe DNG Converter - YouTube

  • Unable to choose 'clear history' - it is greyed out and unselectable

    I can't select 'clear history' - it is greyed out and unselectable on my laptop. Only, it happens on my laptop, but shows my story for many months in the past and includes the history both of my desktops, which is supposed to be cleared frequently. Sync is enabled on all devices, and history does not appear on desktop computers. I am able to clear the history on desktop browsers, but not the laptop. Computer laptop operating system: Windows 7 Home Premium I also have IE, Chrome, Safari installed.

    Make sure that you are not Firefox running in permanent private browsing mode (don't remember history).

    • Tools > Options > privacy > Firefox will be: "use the custom settings for history".
    • : Uncheck the [] "always use the private browsing mode.

    You can check for problems with the database places.sqlite file in the Firefox profile folder.

  • Why am I suddenly "USB not recognized, one of the devices USB has malfunctioned and Windows does not recognize"

    Hi all. If anyone out there in Cyber Land can solve this problem for me so I've personally you will issue an eight-pack of ice-cold beer (or a bottle of wine for the ladies lol)...

    I'll try not to waffle too guys, so here's...

    Right my PC running Windows XP. I also have itunes installed on my PC (I have an iphone 4). Upward until yesterday my iphone and itunes were working well, (once I plugged my iphone in the itunes USB port recognised that my iphone was plugged and synchronization was fine etc.).

    But now when I plug my iphone to PC to sync with itunes, I get a pop up box on the lower right part of the screen that reads... "USB not recognized one of the USB devices has malfunctioned, and Windows does not recognize."

    After visiting about 5 different sites now "Ways to solve this problem", believe it or not, I still have the problem bloody! :(

    A site proposed shutdown PC and unplug it from the power supply, then plug it back start-up and back... this as did not work!
    The other they say that I should go to Device Manager, uninstall all the USBs then restart... it did not work either.
    Tried a system restore
    Tried to reinstall itunes

    When I check the names USB in Device Manager, there is one who reads unknown device. I am literally pulling what's left of my hair now. I tried to solve this problem for almost 2 days now and still no joy. That's why no matter what input you guys would be very appreciated. I'm no PC Wizard, so please, don't think you're patronizing me if you break down things step by step for me.

    Thank you comrades, cordially, Freddy frustrated. :)

    Another said I should go to Device Manager, uninstall all the USBs and restart.

    Usually, this works... but can be very dangerous, unless you have a PS/2 keyboard.

    I also assume that you have tried all other USB ports on the computer. tried a verified USB device (for example, a flash drive) in the USB usually when you plug in your iPhone. and I tried your iPhone in another computer (I know it's rare for an error message Windows really means what he says, but sometimes the material lacks).

    Is the charge of the iPhone when it is connected to the USB port (I don't think)?  This happened to me recently, but a reboot fixed it.  I guess that that happened to you.

    I guess that you don't see the error messages in Device Manager or you must declare them.

    You can uninstall all USB devices that do not exist as follows:

    • Open a command prompt window (start > run > cmd > OK)
    • Enter the following command and press enter

    Set devmgr_show_nonpresent_devices = 1

    • Start the Device Manager by typing the following in the same command prompt window

    devmgmt.msc

    • In Device Manager, click the view menu and select "Show hidden devices".
    • You should see a category just after "Non-Plug and Play drivers" named "other devices."  Chances are that there will be a big exclamation yellow mark beside it.  When you expand the "other devices" you should see several non identified "USB devices."  Uninstall all this.
    • Reboot (with the iPhone NOT connected).

  • Computer is very slow and IE does not work all the time.

    I bought a computer from my old employeer.  He is doing all sorts of things, or should I say not to do all sorts of things.  It is very slow and IE does not work all the time.  They have questions arise and ask if the administrator oks things and other things like that.  It came with any disks.  I would like to wipe, clean and load a new disc, but I don't know where to find the disc or if I can do it.   Can someone please?

    Hello

    Proceed as follows to contribute to these two questions. You can probably buy the disks of Vista machine to system or get
    the former employer to do it for you if necessary.

    Try these and it can also be a good idea to update your main drivers later. The General corruption can also play a
    role in this issue. And even the TCP/IP stack might need to be refreshed.

    What antivirus/antispyware/security products do you have on the machine? Be one you ALREADY had on this
    machine, including those you have uninstalled (they leave leftovers behind which can cause strange problems).

    If no joy there's something blocking perhaps.

    Start - All Programs - Accessories - System Tools - IE with no Addons - what works best?

    IE - Tools - Internet Options - Advanced - tab click on restore, and then click Reset - apply / OK

    IE - Tools - Internet Options - Security tab - click on reset all default areas - apply / OK

    Close and restart IE or IE with no addons

    not better?

    IE - tools - manage Addons (for sure disable SSV2 if it is there, it is no longer necessary but Java always install
    "(and it causes problems - you never update Java to go back in and turn it off again)." Search for other possible problems.

    Windows Defender - tools - software explore - look for problems with programs that do not look right. Permit
    are usually OK and "unauthorized" are not always bad. If in doubt about a program to ask about it here.

    Could be that a BHO - BHOremover - free - standalone program, needs no installation, download and run - not all
    are bad, but some can cause your question (toolbars are BHO).
    http://securityxploded.com/bhoremover.php

    Startup programs
    http://www.Vistax64.com/tutorials/79612-startup-programs-enable-disable.html

    Also get Malwarebytes - free - use as scanner only.

    http://www.Malwarebytes.org/

    --------------------------------

    Try these to erase corruption and missing/damaged file system repair or replacement.

    Run DiskCleanup - start - all programs - Accessories - System Tools - Disk Cleanup

    Start - type in the search box - find command top - RIGHT CLICK – RUN AS ADMIN

    sfc/scannow

    How to analyze the log file entries that the Microsoft Windows Resource Checker (SFC.exe) program
    generates in Windows Vista cbs.log
    http://support.Microsoft.com/kb/928228

    Then, run checkdisk - schedule it to run at next boot, then apply OK your way out, then restart.

    How to run the check disk at startup in Vista
    http://www.Vistax64.com/tutorials/67612-check-disk-Chkdsk.html

    --------------------

    Departure - in the search box, type-> order

    at the top of the list to find COMMAND - CLICK RIGHT to it - RUN AS ADMIN

    Type the following commands (or copy and paste one at a time), each followed by pressing on enter.

    ipconfig/flushdns

    nbtstat-r

    nbtstat - RR

    netsh int Reinitialis

    netsh int ip reset

    netsh winsock reset

    RESET

    That resets your TCP/IP stack

    --------------------------------

    Maybe need of these:

    For drivers, visit manufacturer of emergency system and of the manufacturer of the device that are the most common.
    Control Panel - Device Manager - Display Adapter - note the brand and complete model of your
    video card - double - tab of the driver - write version information. Now click on UPdate Driver (this
    cannot do anything as MS is far behind the certification of drivers) - then do a right click - Uninstall - REBOOT
    This will refresh the driver stack.

    Repeat this for network - card (NIC), Wifi network, sound, mouse, and keyboard if 3rd party with their
    own the software and drivers and all other main drivers that you have.

    Now go to the site of the manufacturer of system (Dell, HP, Toshiba as examples) (restoration) and then of the manufacturer of the device
    (Realtek, Intel, Nvidia, ATI, for example) and get their latest versions. (Look for the BIOS, Chipset and software)
    updates on the site of the manufacturer of the system here.)

    Download - SAVE - go to where you put them - right click - RUN AD ADMIN - REBOOT after each installation.

    Repeat to the manufacturers - BTW on device at the DO NOT RUN THEIR SCANNER - manually check by model.

    Look at the sites of the manufacturer for drivers - and the manufacturer of the device manually.
    http://pcsupport.about.com/od/driverssupport/HT/driverdlmfgr.htm

    How to install a device driver in Vista Device Manager
    http://www.Vistax64.com/tutorials/193584-Device-Manager-install-driver.html

    If you update the drivers manually, then it's a good idea to disable the facilities of driver in the Windows updates,
    This leaves ONE of Windows updates, but it will not install the drivers who are generally older and cause
    questions. If updates offers a new driver and then hide it (right click on it) and then go look for new ones
    manually if you wish.

    How to disable automatic driver Installation in Windows Vista - drivers
    http://www.AddictiveTips.com/Windows-Tips/how-to-disable-automatic-driver-installation-in-Windows-Vista/
    http://TechNet.Microsoft.com/en-us/library/cc730606 (WS.10) .aspx

    Hope these helps.

    Rob - bicycle - Mark Twain said it is good.

  • "One of the USB devices attached to this computer has malfunctioned and Windows does not recognize it." Why it does not recognize my device?

    Some time ago I had a huge problem with my computer (I think that my mother-in-law accidentally downloaded a virus) and I took it to a repair shop where they wiped out completely and replaced the hard drive.  Since I got it back when I try to use my wireless mouse and plug the nano receiver he said 'one of the USB devices attached to this computer has malfunctioned and Windows does not recognize it.  Why he says this?  And what can I do about it if anything?  I already tried uninstalling the driver and reinstalling, but that did not work because as soon as I plugged it it again once he says the same thing.  So I don't know what is happening or how to fix it.  Please help me!

    Hi Carla,.

    Please go to the Microsoft Community Forums.
    After the description of the question, I understand that you can not use the mouse on the computer wireless.
    Let me go ahead and help you to question
     
    What is the brand and model of the mouse?
     

    Here are some ways you can follow to resolve the problem:

    Method 1:
    Try to connect to other USB port and verify.
     
    Method 2:
    I suggest for the link and follow the steps in the article:
    Troubleshoot a wireless mouse that does not correctly
     
    Method 3:
    Remove and reinstall all USB controllers
    Follow these steps:

    a. click Start, click run, type sysdm.cpl in the Open box and then click OK.

    b. click on the hardware tab.

    c. click the Device Manager button.

    d. expand Bus USB controllers.

    e. right click on each device under the Bus USB controllers node and then click Uninstall to remove them one at a time.

    f. restart the computer and reinstall the USB controllers.

    g. plug in the removable USB storage device and perform a test to ensure that the problem is solved.


    I hope this helps. If you have any other queries/issues related to Windows, write us and we will be happy to help you further.

Maybe you are looking for