time analysis failed

Similar Questions

• If all the listeners ANALYSIS fails

  Hi Experts,
  
  Listeners AFIK SCAN redirects incoming client connections to local listeners.
  
  If a single ANALYSIS fails over to node SCAN o failure fail to other live nodes
  
  What happens if all SCAN listeners breaks down at the SAME TIME. (Imagine)
  
  Are incoming connections fails until the restored services or another way possible?
  
  
  --
  Thanks in advance
  Vijay

  887400 wrote:
  Hello

  By reading this document SCAN, I had this question.

  OK now.

  Let's say that. I 2node default RAC has 3 listeners SCAN

  Node 1 has 2 SCAN listeners and node 2.

  If node 1 fails, then ANALYSIS listeners on that node fail over to node 2.

  Node2 hosts now all three Auditors SCAN. When the 1 NŒUD returns 2 SCAN listeners will fail to node 1.

  Please correct me if I'm wrong.

  Your interpretation is correct...
  In the case of 2-node rac system, having two scna listener running in a single node is the behavior expected and supported under normal circumstances. (because oracle is recommended to use 3 SCAN ips even if its 2 node rac).
  And Yes when node 1 fails, then the resources of VIP SCAN and SCAN listener will failover to the rest of i.e node 2. And when node 2 is restored again, and then again VIP SCAN and SCAN listener will move to it.

  Please see following the lines of > http://www.oracle.com/technetwork/database/clustering/overview/scan-129069.pdf
  "In this case, a cluster nodes-2-is used (for which 3 IPs are always recommended for simplicity), a server in the.
  cluster will host two sets of resource ANALYSIS in respect of normal operations. If the node running a VIP SCAN fails,
  the VIP SCAN and its associated listener are failed over to another node in the cluster. If using such a failure of the
  number of servers in the cluster becomes less than three, only one server will host still two sets of SCAN
  resources. If a node is available again in the cluster, the formerly mentioned dispersion will be implemented and
  move a game accordingly. »

  Published by: 909592 on April 9, 2012 13:18

• Update error... I tried to update for the month and each time it fails

  I tried to perform updates for the month and each time it fails.  I get the same error message... Code 646 WIndows has encountered an unknown error.  I did troubleshooting and you are unable to find assistance.  I don't know much about the workings of the computer, but I know that I should be able to perform these updates.  I think I need it too.  I have 9 at this stage that it cannot load.  Help, please!

  I tried to perform updates for the month and each time it fails.  I get the same error message... Code 646 WIndows has encountered an unknown error.  I did troubleshooting and you are unable to find assistance.  I don't know much about the workings of the computer, but I know that I should be able to perform these updates.  I think I need it too.  I have 9 at this stage that it cannot load.  Help, please!

  This link leads to a response from Bobby Mi, moderator.
  Date: July 6, 2010
  http://social.answers.Microsoft.com/forums/en-us/vistawu/thread/18449f60-C149-4EAF-B8E6-a2880cd7232b

  Bobby Mi response will lead to this tutorial from Microsoft Support:
  http://support.Microsoft.com/kb/2258121

  Hope this can help solve your problem.
  For the benefits of others looking for answers, please mark as answer suggestion if it solves your problem.

• I could not install update KB978207 No. several times but every time it failed. Can anyone help?

  Remember - this is a public forum so never post private information such as numbers of mail or telephone!

  Ideas:

  • You have problems with programs
  • Error messages
  • Recent changes to your computer
  • What you have already tried to solve the problem.
  • Tried to install this update about 7 or 8 times, but each time it failed.  I could install withoy updates all the problems later.

  Windows Update Forum:

  It comes with Vista, upgrade install and activate Forum.

  You will get the best help for any problem of Update/Service Pack in the Windows Update Forum; the link below:

  http://social.answers.Microsoft.com/forums/en-us/vistawu/threads

  When you repost here, kindly include the Error Codes, and exactly what is happening when you try to update.

  In this way, you will receive the best help.

  See you soon.

  Mick Murphy - Microsoft partner

• vmmark2 - error - time synchronization failed start/finish

  vmmark2 - error - time synchronization failed start/finish returned RC = 10002, System Error 1326 unknown or wrong password username.

  I provided the correct credentials to connect to the VCserver.  Not sure why she's enclosure.

  Is the VC server credentials or the credentials of vcenter?  These two don't with the same error.

  Without a NTP server, you will need to manually synchronize things to the top and make sure that they don't automatically readjust their time.  Review the TimeChecks.txt file that is generated when executing.  This will tell you how far the individual systems are.  Each system must be within 60 seconds of the first customer.

• Transient analysis fails: Timestep too small

  I use Multisim 10.1 to assemble logic gates of transistors for an undergrad Electrical engineering class. Part of the specification is that doors should drive a 1 or 8 pF capacitor at the output in the 1nsec voltage. (I think that the circuit, which I've made available is the version 8pF).

  "Circuits work very well when I test for logical functionality with a frequency of input measured in seconds, but when I try to measure the time of release of a Ghz entry, the transient analysis invariably fails with a ' no time too small" error.

  I looked through the site or all kinds of possible fixes (adjustment of the values of the relative and absolute error, etc...), but no luck.

  for example, the project in question are: http://dl.dropbox.com/u/4286123/callforhelp.zip

  I would appreciate any advice, anyone can give me to help get the circuit able to run a transient analysis of higher frequency.

  Thank you!

  Brian Lojeck

  Student in EE, CSULB

  Hi Brian,.

  I took a glance at your circuit and it seemed that your cmos_andx8_timing_test_circuit.ms10 file generates errors of convergence. I did the following two changes in the settings of your transient simulation and circuit simulated very well:

  1. Scan options > SPICE Options > Use Defaults Multisim
  2. Crawl settings > settings > no time maximum (TMAX) = 1e-13 s

  As a general rule, you want to set the TMAX parameter to be substantially less than the smallest feature of your signal. In your case, the smaller is the rise in V1 (1ps) time. If possible, try to simulate with slower rise/fall times and slew rates. It is much easier for Multisim to converge semiconductor solutions if these settings were larger. I guess you do not have the luxury here, but if you were to just test the behavior of your circuit, it would be desirable.

  Hope that helped.

• Photosmart 2610 analysis fails

  Scanning has been a problem on Windows 10.  If I try press scan on the printer that says "You must install or run HP software for this feature."  But the HP Solution Center does not work.  Something flashes on my screen, bumps and disappears before I can read it.  I downloaded the latest version of the 2610 software and drivers, but I don't see a software that will run the scan.  In the past, it was HP Solution Center, but I have seen references online to the HP Printer Wizard, but which does not appear to be part of the download.

  I even downloaded HP Print and Scan doctor and he ran.  He has indicated that the scan function is working.  Soon after, the screen of the printer showed a message that the parsing failed.

  So what software do I need to perform a scan, how I get it, and how to do the scan work?

  Jim Petrarca

  First thing I tried was Windows Fax and Scan, and it worked.  Curiously however, some time after completing a successful analysis, printer showed the "Scanner failure" error and required me to restart to clear the error state.

  Then I saw this update KB3133431 was waiting, so I installed.  It took a while, but when it finished I retried HP Solution Center - and this time it worked to take a scan.  The oddity reappeared here too, even though - a successful analysis followed the mistake of the printer "scanner failure".

  I'm scratching my head about the weirdness, but at least now I can scan.

• Time Machine failed backup. What are alternative backup software?

  A MBP with 1 TB HD could not continue the Time Machine backup, after update OS X to El Capitan 10.11.6. Old backups TM are automatically removed because of the error checking. The MBP also failed to make a new backup TM.

  I guess I maybe need a reinstallation of the OS X. How is it safe to reinstall OS X 10.11.6 without a backup?  Any suggestion of a software disk cloning? (e.g. copy of carbon can make a clone of disc? How do I?)

  You should check the drive you used for Time Machine backups with disk utility > first aid to make sure that the disc is not serious. If you mean Carbon Copy clone, yes it can create clones. Instructions to create a clone are provided with the program.

• Maching time keeps failing - bought new hard drive and still the same problem

  I'm on a mac 27 inches, El Captain 10.11.2 upgrade

  Not had a problem for years and then suddenly about a month or two before, he started to do all the time. Got a mybook 2 TB for mac for Christmas - same problem. Works perfectly for hours/days at a time, and then fails again. Don't know what to do!

  

  

  I know it sounds weird, but I would like to start by making sure that your Mac hard drive is correct. Demarrer start on the recovery environment, run disk utility and perform first aid on your hard drive. You can also perform a boot secured, which does essentially the same thing.

  I also saw problems with USB devices that appear only on a specific USB port. Try changing ports.

  The external drive is new does not mean that it is not defective. Perform first aid on the external hard drive and reformat. Better still, try another drive altogether to eliminate the drive as the source of the problem.

• Continuous data acquisition and real-time analysis

  

  Hi all

  It is a VI for the continuous acquisition of an ECG signal. As far as I understand that the analog read DAQmx VI must be placed inside a while loop so it can acquire the data permanently, I need perform filtering and analysis of the wave in real time. How I implemented the block schema means that data stays int the while loop, and AFAIK the data will be transferred on through the tunnels of data once the loop ends the execution, it clearly isn't real-time data processing.

  The only way I can think to fixing this problem is by placing another loop that covers the screw scene filtering and using some sort of registeing shift to transmit the data in the second while loop. My question is whether or not it would introduce some sort of delay, and weather or not it would be supposed to be the treatment in real time. Wouldn't be better to place all the screws (aquicition and filtering) inside a while loop? or it is a bad programming practice. Other features I need to do is back up the data I na file, but only when the user wants to do.

  Any advice would be appreciated.

  You have two options:

  • A. as you said, you can place the code inside your current while loop to perform the treatment.  If you're smart, you won't need to put one another while loop inside your existing (nested loops).  But it totally depends on the type of treatment that you do.
  • B. create a second parallel loop to perform the treatment.  This would be separate processes to ensure that the treatment is not obstacle to your purchase.  For more information, see here .

  Your choice really depends on the transformation that you plan to perform.  If it's much the processor, this could introduce delays as you said.

  I would recommend that you start at any place in the first loop and see if your DAQ buffer overruns (you can monitor the rear of the buffer during operation).  If so, you should decouple the process in separate loops.

  In what concerns or not ' it would be considered as real time processing ' is a trick question.  Most of the people on these forums say that your system is NEVER in real time because you're using a desktop PC to perform processing (note: I guess it's the code that runs on a laptop or desktop?).  It is not a deterministic systemand your data is already "old" by the time wherever he leaves your DAQ buffer.  But the answer to your question really depends on how you define "real time processing".  Many lay it will set as the treatment of 'live' data... but what is "actual data"?

• build a real-time application failed

  When I Isaiah to compile my application in real-time in order to deploy it in a device crio, it fails. I can run very well by opening it and clicking run. It can deploy and run all day in this way, but he needs the computer that much too. So I need to be able to build and deploy. When I do a preview of the generation, it complements very well with no error. I put the program I want to launch the start and my folder virtual subVIs always include. It is a typical procedure for deploying projects on the crio.

  When it crashes, I get an error:

  The build failed.

  Possible reasons

  An error occurred during the recording of the following file:

  C:\Program NIUninstaller Instruments\LabVIEW 2009\vi.lib\rvi\ClientSDK\Core\ModuleGeneration\CommunicationInterfaceUtility\niFpgaDmaChannelImplementation.ctl

  Invoke the node in AB_Source_VI.lvclass:Close_Reference.vi-> AB_Build.lvclass:Copy_Files.vi-> AB_Application.lvclass:Copy_Files.vi-> AB_RTEXE.lvclass:Copy_Files.vi-> AB_Build.lvclass:Build.vi-> AB_Application.lvclass:Build.vi-> AB_RTEXE.lvclass:Build.vi-> AB_Build.lvclass:Build_from_Wizard.vi-> AB_UI_Frmwk_Build.lvclass:Build.vi-> AB_UI_FRAMEWORK.vi-> AB_CreateNewWizard_Invoke_CORE.vi-> RTBUIP_CreateNewWizard_Invoke.vi-> RTBUIP_CreateNewWizard_Invoke.vi.ProxyCaller
  
  Method name: Save target: Instrument

  I put in a request for service (reference #7259553), but I'm just not getting help fast enough. I'm on a real deadline here and I expected just kind of request of manufacturer to work as she has always done. I have done this a million times with other applications and never had a problem like this.

  Thanks in advance for your help guys.

  With the great help of sales engineer Will Schoettler, we were able to solve the problem.

  1. first of all we tried to create a new project from scratch file, add all the files and the fpga of the compilation. Same mistake.

  2. then we made individual buildings deploy each Subvi individually to see if one of them was the cause of error. Each built without problem.

  3. I tried to create a new generation of program main crio and tweek the settings. Rather than manually adding the Subvi and variable to the section "always include" the compilation option library folder, I simply added the main VI to the list of startup programs and would make LabVIEW to understand what screws to add. For some reason, this gave me a more verbose error explanation and gave the following reason as the last sentence of the explanation of the error

  "Due to limitations of the operating system, LabVIEW cannot create the file because its pathname contains too many characters."

  I moved the project to the c: folder /, fixed broken in the project references, and he built the VI and deployed it is fine.

  The constructor creates a directory with a very long path name in your project file, so if you have your project folder deep in your directory tree, it will attempt to create files with paths for windows too big to manage.

  Mad Kudos to Will Schoettler engineering app for such a powerful and complete troubleshooting task list to try things which lead me straight to the solution. I'm glad it was something so simple and not a form of file corruption or something wrong with my code.

  Thanks for trying to help the guy.

• Windows XP Service Pack 3 (KB951376) trying to install every time but fails

  Original title: WINDOWS XP UPDATE or some TIME HAVE to ASK INSTALLSP3 (KB951376) WHENEVER ILS in FAILURE HOW can I STOP ASKING or HELP in INSTALLING SP3

  HOW TO COMPLETE AN INSTALLATION OF SP3 FAIL

  Hello!

  If the current version on your computer is SP2 and it fails when it tries to update, try to install SP3 manually get service pack 3 of this link:
  http://www.Microsoft.com/en-US/Download/details.aspx?ID=24
  You may need to rename the catroot2 folder and the software distribution folder, first if the installation of the sp3 above failed
  Follow this:
  How to rename the catroot2 folder:
  At the command prompt, type the following commands and press ENTER after each line:

  net stop cryptsvc

  Ren %systemroot%\System32\Catroot2 oldcatroot2

  net start cryptsvc

  output
  How to rename the software distribution folder:
  Net stop wuauserv

  CD %SystemRoot%\System32

  Ren C:\Windows\SoftwareDistribution SoftwareDistribution.old

  Net start wuauserv
  output
  Hoe this helps
  Please come back if you need assistance
  Thank you
  Makoi

• I have windows vista and are currently trying to install an update of microsoft KB2507938 give my code error 8024200d tried several times but fails to install I need some please

  I need help with one of the Windows Update will not be installed and gives me the error code - I tried to install several times but he says fails to install - thanks phil

  Hi firoz909,

  Install the system update tool and then install the update failed.

  Description of the preparation tool system update for Windows Vista for Windows Server 2008, for Windows 7 and for Windows Server 2008 R2

• seven times this failed: "upgrading to windows 10 pro version 1511 10586 failure important 17/05/2016

  Microsoft has been automatically installing windows may 10 17,2016 I got 7 times:

  Upgrade to windows 10

  version Pro 1511 10586 failure important 17/05/2016

  Review:

  • How to: 10 tips before installing Windows 10
  • How to: 10 things to do if the Windows 10 install fails.

  Retry the upgrade manually:

  Option 1:

  Download the media creation tool

  Click with the right button on the MediaCreationTool.exe file and then click on run as administrator.

  

  Note: How to check if you are downloaded or installed the update Windows 10 November

  How to create an ISO or USB drive.

  Select upgrade this PC now and then click Next

  

  Option 2:

  Task of pre-required

  When you make significant changes to your computer for example updated operating system, you must always back up. See the links to resources on the backup by clicking the link for each version of Windows you are using: Windows XP, Windows Vista, Windows 7, Windows 8/8.1

  • How to back up and restore your files manually
  • How to free up disk space in Windows
  • How to: 10 tips before installing Windows 10

  then

  • How to download official Windows 10 ISO files
  • How to: upgrade previous versions of Windows using the file ISO for Windows 10

  then

  • Turn off (preferably uninstall) your Antivirus utility before you perform the upgrade.
  • Reboot several times, and then try again.
  • Disable the general USB peripherals (for example - smart card reader).
  • If you are using a SCSI drive, make sure you have the drivers available for your storage on a thumdrive device and it is connected. During the installation of Windows 10, click on the advanced custom Option and use the command load driver to load the driver for the SCSI drive. If this does not work and the installer still fails, consider switching to an IDE based hard drive.
  • Perform a clean boot, restart, and then try again.
  • If you upgrade to the. ISO file, disconnect from the Internet during the installation, if you are connected in LAN (Ethernet) or wireless, disable both, then try to install.
  • If you are updated through Windows Update, when download reaches 100% disconnect from the LAN (Ethernet) Internet or Wi - Fi, then proceed with the installation.
  • If this does not work, try using the. ISO file to upgrade if possible.
  • If you are connected to a domain, go to a local account.
  • If you have an external equipment, attached to the machine, unplug them (example, game controllers, USB sticks, external hard drive, printers, peripherals not essential).

• Analysis fails, HP imaging device not found

  Photosmart B209a-m. Windows 7

  I had this all together to the top and a power problem and sort of work broken installation. I have the printer as a wireless network device and it worked fine for months. After the power glitch, I uninstalled the printer and reinstalled and had no chance to get scanning to work. I downloaded the latest HP drivers (full version). I recycled power to the printer and the router and restarted the computer. The HP print and scan doctor said that the scanning driver can not talk to the printer. Printing works fine.

  I originally had the printer hooked as a USB printer and then converted to wireless. So, I repeated the process. I installed as printer USB, everything worked. I then rebooted everything and retested and everything was good. So I ran the conversion from USB in wireless on the Setup option. It worked well, and after unplugging the USB cable, scanning still worked. Be!

  But I then rebooted and now scanning fails again with the same error, cannot find the HP imaging device. Printing works fine. The network of diag test shows no problem. The HP Print and Scan doctor suggests I do the reboot and reinstall I just went through without result. I reinstalled the drivers 4 times without success, except when the first installation in USB and then converting to wireless but that was transient.

  I don't know what I can do? In addition he keeps popping up of the error messages that is REALLY annoying.

  I thought about it. He seems to have been a configuration of printer/router error affecting scanning.

  The first time that I have configured the wireless printer, I have used the Wi - Fi Protected Setup between the printer and my Cisco/Linksys router and everything worked fine.

  For that reconfigure, I let the printer installation software manage the negotiation and Setup. He passed all the tests and print worked fine but scanning does NOT.

  I went in the touch panel printer and Wi - Fi protected setup initiated and supported on the Cisco configuration button. The printer and router negotiated and digitization of works. I shut down my computer and restarted it and scanning always works. I think this is now resolved.

  It seems that drivers scanner use another method wireless printing.

  I'm surprised/disappointed the HP print and scan doctor could not understand this. In addition, NOWHERE there at - it a suggestion to try to renegotiate the Wi - Fi Protected Setup between the printer and the router. Check the cables, recycling power, reinstalling drivers are all suggested, but nowhere is a step obvious allusion. I spent hours doing useless things and the real difficulty was simple and has taken every 1 minute.