Time button display

Similar Questions

• Win 7 - closing button displays updates to deal with but no updates ever treated on "stop".

  Latest windows 7

  Windows Update works fine in the sense that the traffic updates are treated and updated correctly.  But there are 3 or 4 weeks, I noticed the power off button displaying the exclamation symbol and when I got "high" on the button it displayed the following message - "installs the updates and then shuts your computer."

  I turned off, but no updates have been processed.  I turned on again and check the updates manually, but there is nothing exceptional.  I have a few days later a bunch of updates have been processed when I turned on (all properly updated), but I still got the message on the off button indicating updates to be processed when I turned off.  When I turned off no updates have been processed.  Other that an annoying message on the off button, there seems to be nothing wrong with my computer.

  To try to address the issue, I ran the Windows update program utility troubleshooting on the Microsoft site.  He said that this is a problem ("registration for the service is missing or corrupted") and said that it has been fixed.  However, the Power Off button continues to indicate that updates will be handled when I turned off, but stop down quickly without ever get processed implemented to date.

  This isn't a big problem for me, but everything just annoying.  Can anyone help

  Windows Update behaves properly and install updates when they become available.  The only problem is that ever time I'd go to power off the system tell me that updates would be installed when I turned off.  But there is never to deal with updates and the system would be turned off after a very slight delay.  So on advice from Microsoft, I changed the windows settings of update "manual" and checked from time to time for updates and the issue was "resolved."

• Click on the button "display remote content" content remote does not show. If I go back to e-mail even later "display remote content" is not on the page.

  The "issue" essentially lines the problem.
  No distance shows content when the user clicks on the button "view remote content. Once it has been clicked on a specific email, if I go back to the same email, the button "display remote content" is not on the e-mail page and no remote content shows again in the body of the email.
  I use an updated version (24.4.0) of Thunderbird.

  The problem is often caused by anti programs anti-virus and other security software blocking Thunderbird to get the remote images. The GET for images using a web port usually and some security software not see Thunderbird as a browser and block access.

• The firefox button and the button display the panorama are two disappeared in FF4 RC1

  I upgraded to FF4 RC1 two days earlier and noticed that he was missing the button display the panorama and the firefox button, which is supposed to replace the file, edit, view menus etc. had not yet done. So basically, I'm still stuck with the buttons of the menu style FF3.

  If you hide the menu bar, you should get the Firefox button. That right-click on a toolbar and deselect the option "menu bar".

  For the Panorama button, right-click on a toolbar and then choose Customize to open the Customize toolbar window. Drag the "Groups of tabs" icon to the toolbar, then click done.

  https://support.Mozilla.com/kb/how+to+customize+the+toolbar

• a pc with a stand-alone module, real-time can display of its own data

  Hi all

  It is sort of a basic question, and it's probably why I can't find the answer explicitly in textbooks or the forum posts.

  If I want to use a PC as a unit in real time, and I install the LabView time real OS on it and make an Application of real-time on another machine and compile it in the PC target in time real LabView, can I attach a monitor or a kind of screen directly to the PC unit in real time to display some data I need?  Or do I still need a Labview PC to act as a host for display data and interface with a user?

  Thanks for the info!  I have some experience of labview, making some other applications but I have never used the RealTime module yet so I don't know much. So if there is a good place for more information in time real LabView for use a PC as a device target, which may also be of interest and would be appreciated!

  Thanks again.

  Steve

  Hi Steve,.

  Our objectives in real time are designed to work in headlessly, which means that they are independent and have no user interfaces.  It comes to screens.  For a display of information, you must use a host VI, on a host computer. There are several ways to move data between a target RT and a host PC including, but without limitation, TCP, UDP, network flow, published static Variables of network and Web Services.  These are all covered in documents on best practices.

  Here is a page real-time best practices:

  http://zone.NI.com/reference/en-XX/help/370622J-01/lvrtbestpractices/rt_portal/

  Here's a page on the conversion of a desktop computer to a target RT:

  http://zone.NI.com/DevZone/CDA/tut/p/ID/2733

  Good luck with your project.

• Change the language of the browse time button

  Hello. How can I change the language of the browse time button. For example,.

  

  I want to change the caption of a button 'Set time to Now', 'time '? Is this possible?

  Thanx.

  The dialog box is a VI that is part of the LabVIEW package.

  You can make a copy of this VI and change the text of the button you want.

  Search for picktime.vi in your \resource\dialog\ of your LabVIEW installation subdirectory.

• Button display symptom

  I have 3 regions on a page and the 2nd region has 4 buttons and a SQL query report that shows data of EMP.

  There are two page element:

  HIDE_SHOW - which is show to show data and Hide to hide data.

  P1_SAL_LIMIT - which limits employees by salary: 0 (default), 1500 or 2000

  The buttons are:

  Show - which, in a hurry, the report (not whole region just lines of data in the report.)

  (The display button displays when: HIDE_SHOW = 'Hide'.) Note that the data is hidden when this button is displayed).

  Hide - who, when you press on, hides the report

  (The Hide button displays when: HIDE_SHOW = 'Show' and the data are displayed.)

  SAL > 1500 - that show only employees with sal > 1500

  SAL > 2000 - that show only employees with sal > 2000

  The query is

  Select ename, sal

  WCP

  where: HIDE_SHOW = 'Show' and SAL >: P1_SAL_LIMIT

  What works:

  Show, Hide, and Sal > 1500 work very well together.  Note: the Sal > 1500 button sets: HIDE_SHOW to 'Show', so we can see the data.

  But I need to make a calculation when a SAL is depressed, so here's what I tried.  The SAL > 2000 button is configured with dynamic Actions (PL/SQL block and page refresh).  Note: I need to do (the same) a branch page or a refresh and not a page submit due to activity that may be pending in other regions on the page.

  
  What I need / planned when you press Sal > 2000: Button hide THE appear as: HIDE_SHOW is set to 'Show' and the data is displayed.

  Problem when you press Sal > 2000:  Even if I put: HIDE_SHOW to "Show" in the calculation by pressing Sal > 2000 has no effect on the button display.

  It's a problem state of Session, right?  But I do not know how to solve it without a shipment.   I added a value set to the DAs, but that has not solved the problem.

  How can I get the button 'Show' to react to the change in the value of: HIDE_SHOW?

  You can see that he set up here:

  WS: APEX_EXAMPLES_01

  Demo / demo

  Request 16604 (Button control), p. 1

  Thank you

  Howard

  Yes, you're right, the show buttons were not quite functional, sorry, I was focused on the filters.  I've corrected the hide for the first in the region.  Region 2 is primarily and you can replicate the features for this one. However, the filter of Sal for region 2 buttons work and you can see how all this works regardless.  Please concentrate on the techniques.

  The basic steps for filters are:

  1 set filter limit

  2 set the Hide_Show variable

  3. hide the button display

  4 show the Hide button

  5. refresh the report.

  Note the calculations. They are needed to initialize the values.

  I also changed things so they trigger the change in value of an element.  This seems just obscure for me when the user cannot modify the element directly.  It seems preferable to trigger the button clicks. Is that the "button SHOW report 1" and "HIDE Report 1 button" DA are for.  If you look at them, I think they are really easy to follow (Show button, hide the other button, set the filter Hide_Show, update report)

  When break it down you into steps and give meaningful names to your items (objects, regions, da, etc...) I think that all this becomes much easier to manage.

  I've certainly seen unmaintainable requests since I started way back on HTMLDB 1.6 APEX.  That said, they are for the most part easy to maintain when things are well thought and steps are broken into easy understandable actions.

  Good luck!

  Thank you

  -Jorge

• Button displayed among the elements of this region delete fields

  I created a button displayed between fields of clears the items in this region which is in the middle of my form, to submit before the value...
  Then click on the button, he submits and field elements above the clear form button.
  
  I need to present, I just need to make three fields appear on the form, if necessary, where the use of the button.
  Thanks in advance!

  follow these steps:

  How to clear the field in the APEX...?

  As shown in the link above, give the name of the item in the process that you want to remove.

  Concerning
  tauceef

• pushed single screen several times on display battery but can not go back to the previous screen again by clicking on "back" to come to the first screen button

  Hi all

  There is a screen with meter as label, datefield and objectchoicefield in the menu drop down and add and go button, this screen is pushed repeatedly on display battery until the meter is new. But when I try to go back to the previous screen, there is problem normally by substituting the onClose() method you can pop current screen and can get the previous screen, using getActiveScreen() and then push it again if you do not override os onClose() automatically do it for you.

  But in above case when I click on the button "back" or screen previous override onclose and push, I see my first screen I wanted my current screen with the counter that is if active screen is having against label like new if I press the "back" button, it should display screen with the meter only eight and so on.

  Can someone please help me solve this problem.

  Thanks Peter for you answer, actually used function for pushscreen on stach display that was written by someone else, when I looked carefully there condtion as below,

  if (activeScreen != null) {
   Class screenClass =activeScreen.getClass();
      if (screen.getClass().equals(screenClass)) {
                      UiApplication.getUiApplication().popScreen(activeScreen);
      }
  }
  

  It's actually the previous screen of poping before push the screen from the class were same, just commented and everything works, even if you do not override onClose and press return, it will automatically displays the previous screen.

• At the same time, my 'display driver no longer' & Firefox crashes. Any relationship between those 2 events?

  Every day or two, when I wake up my Windows laptop, 8 of the screen saver, the screen remains dark, sometimes for several minutes or more, and then he comes back and shows a message: "display driver stopped responding and has recovered. Display driver Intel graphics accelerator driver for windowos 8 (r) stopped responding and has successfully recovered. "After searching on Google, I see that I am far from alone to receive this message.

  But ALSO, when the screen finally wakes up, Firefox broke down (most of the time).

  So what is happening here? What's the causal problem? Or are they the two results of something else? It cannot be just a coincidence that they are together, it can?

  Hello

  Try disabling graphics hardware acceleration. As this feature has been added to Firefox, it has gradually improved, but there are still some problems.

  You will have to perhaps restart Firefox for it to take effect, so save any work first (e.g. you compose mail, documents online that you are editing, etc.).

  Then perform the following steps:

  • Click on the orange top left Firefox button, then select the 'Options' button, or, if there is no Firefox button at the top, go to tools > Options.
  • In the Firefox options window, click the Advanced tab, and then select 'General '.
  • You will find in the list of parameters, the checkbox use hardware acceleration when available . Clear this check box.
  • Now restart Firefox and see if the problems persist.

  In addition, please check the updates for your graphics driver by following the steps in the following knowledge base articles:

  • Troubleshoot extensions, themes, and issues of hardware acceleration to resolve common problems of Firefox
  • Update your graphics drivers to use hardware acceleration and WebGL

  This solve your problems? Please report to us!

  Thank you.

• My Windows Photo Gallery has incorrect time for good that my computer is correct. I know how to change the time, but wanted the exact time is displayed automatically when you scan photos etc as before.

  Time is incorrect in Windows Photo Gallery and I would like to do this automatically scanned early for photos instead of my change time.

  Hi Sardai,

  Unfortunately, this information is not always accurate. If you took some of your pictures in a different time zone, for example, the time recorded for these pictures could be incorrect by several hours. The camera can also be set to the wrong date and time. Or, if you're scanning photos, ta date will reflect the date that they have been digitized, not the date on which they were taken. All these anomalies can be adjusted manually.

  To change the date or time

  1. open Windows Photo Gallery by clicking on the Start button, all programs, and then clicking Windows Photo Gallery.

  2. If you do not see the details on the side of the window pane, click information on the toolbar to display it.

  3. click on the image you want to change.

  1. to select more than one picture, hold down the CTRL and click each picture you want to change.

  4. click on the date at the top of the details pane.

  5. click on the arrow next to the date and then click the correct date on the calendar.

  6. click on the time at the top of the details pane.

  7. Select the correct time.

   

  To adjust the time for pictures taken in a different time zone

  1. open Windows Photo Gallery by clicking on the Start button, all programs, and then clicking Windows Photo Gallery.

  2. right click on the image you want to change and then click on change time taken.

  To select more than one picture, hold down the CTRL and click each picture you want to change, and then click a picture when you are done.

  3. in the change to box, type the number of hours to change, or click the up or down arrow to select the number of hours. To make the new start time, type a minus sign (-) before the number.

  For more information, see the link below:

  http://Windows.Microsoft.com/en-us/Windows-Vista/change-the-date-and-time-a-picture-was-taken

  Thank you, and in what concerns:

  Ajay K

  Microsoft Answers Support Engineer

  Visit our Microsoft answers feedback Forum and let us know what you think.

• Buttons displayed to the rest of the project

  I am trying to replace the PlayBar with my own buttons (some are text buttons and other buttons image), but for some reason, there is no option to view the rest of the project. The only 2 options are: 'specific time' and 'rest of slide '. Am I missing something?

  If you are using a version before 6 this is the sad truth: interactive objects can never be used on blades of masters, or displayed for the rest of the project.

  If you use Captivate 6, there is good news: my personal favorite novelty are used as buttons on Forms. They can be displayed for the rest of the project:

  http://lilybiri.posterous.com/why-i-like-shape-buttons-Captivate-6

  http://lilybiri.posterous.com/toggle-shape-buttons

  http://lilybiri.posterous.com/want-a-button-on-question-slide-in-Captivate

  Lilybiri

• Select the list when the button display problem in Oracle Apex

  Hello world
  
  I use a button that displays a selection list box (contains two values) click on...
  
  Whenever the button is touched for the first time, the selection list box does not appear properly... the list box is displayed in a smaller size if the values it is not visible...
  However it appears correctly when I hit the button for the second time... its strange...
  
  Help, please!
  
  Kind regards
  Sandeep Reddy

  There are two options. One is to create a Page process that fires before header or after and sets the value of the element. This method works when the value is independent of the other page elements. If the value is dependent on other page items, you can set all at once in the same process.

  Example:

  declare
    var_field1   VARCHAR2(40);
  begin
    var_field1  := :APP_USER;
    :PX_USERNAME  := var_field1;
    select COUNT(row_id) into :PX_USER_COUNT from users;
  end;
  

  This example illustrates two ways to define the elements of the page: one using another variable and the other as a result of a pass-through select query. You can also use the function calls, the application variables and more.

• rounding of Firefox buttons display problem

  Hello

  It seems that Firefox has issues with the rounded buttons (AFAIK).

  I'll post some screenshots to demonstrate:

  http://screencast.com/t/EJ2wIJMrna

  a refresh of the page itself, produces different artifacts of the same nature:

  http://screencast.com/t/NBqrrqTQVp8

  Sometimes, if you refresh a page enough times, you might not get these artifacts.

  The Web page on the screenshots is: https://developer.mozilla.org/en-US/docs/Web/CSS/border-radius but I saw this question on a lot of pages, sometimes even on the Google search page.

  I am running the most recent version, official, stable Firefox, but I noticed this problem for at least the last 2-3 versions of the browser.

  You can try disabling OMTC and leave hardware acceleration in active Firefox.

  • topic: config page: layers.offmainthreadcomposition.enabled = false

  You can open the topic: config page via the address bar.
  You can accept the warning and click on "I'll be careful" to continue.

  • http://KB.mozillazine.org/about:config

  You can try to disable hardware acceleration in Firefox.

  • Tools > Options > advanced > General > Browsing: "use hardware acceleration when available.

  You will need to close and restart Firefox after enabling/disabling this setting.

  • https://support.Mozilla.org/KB/troubleshooting+extensions+and+themes
  • https://support.Mozilla.org/KB/upgrade-graphics-drivers-use-hardware-acceleration

• Upgrade ver 31 button 'display remote content' is replaced by 'preferences' how to undo this change?

  After a recent upgrade to version 31 the show contents button distance was replaced by a Preferences button. Instead of a simple click, I must now click the Preferences button, and then select display remote content. Two clicks vs. sucks one click. I want my back button and I don't always want to display the content. Why this change? I guess that there was a reason, but I don't like and I would like to change back if possible. Is it?

  Thank you
  Danneauxs

  He changed a number of reasons. most obvious is that the address book is a bad place for a white list.

  Secondly, this change allows enable you areas for images as well as e-mail addresses. given the ban is for security in the first place in that the source of the image is really more relevant than the e-mail anyway.

  THUS, there is no I want my single click on the back button. It will not happen. When the new address book comes with the release of the year next (I hope) he will not support the option of white list at all so it won't even be an option of an add-on.