a pc with a stand-alone module, real-time can display of its own data

Similar Questions

• H - HARVEST with 1142N - stand-alone or models LWAPP

  Have a remote site with several stand-alone 1142N APs. Have to replace some old AP and wishes to standardize on the 1142N. Consider using the WPS 4400 control with REAP H rather than have them hang out there alone, but want the backup in case they lose the connection to the office. Wondering if I am better or to buy the LWAPP models continue with the stand alone?

  Wait, they can be CONVERTED to work with the controller. You just 'upgrade' the IOS to an image lwapp and boom, he joined a controller. But what I've said, is that you can have the IOS AP as is, work with a controller. You need to make lwapp first, which is just another IOS image that runs on it. (if you check in the download section of cisco.com, you will see '"IOS Software' and"IOS lwapp upgrade image").

  So to answer your question in leolahoo, simply upgrade you the IOS in the 'ios to lwapp upgrade image".

  command is "archive download-sw/f/o tftp: / /"like when you put a new IOS on it. "

  Nicolas

• CSP Web registration with default stand-alone CA

  I have a stand-alone certification authority. I understand from my research I can't use templates with it, so I wonder if there is a way to force the default CSP coming to a user tries to use the web interface to request a certificate. On the advanced certificate request page, some client machines choose Microsoft Enhanced RSA and AES Cryptographic Provider by default, some choose Microsoft RSA SChannel Cryptographic Provider. They have the same (Win 7 x 64) operating system and the browser (IE9).  So far, I've been unable to determine why they choose one or the other. Can anyone help?

  Hello consult Hyperion,

  I think that TechNet for Windows Server forums would be best for your questions.
  http://social.technet.Microsoft.com/forums/en-us/category/WindowsServer

  For questions about certificates, safety category would be the place to post.
  http://social.technet.Microsoft.com/forums/en-us/winserversecurity/threads

  Thank you!

• Blue screen after with VM stand-alone converter P2V conversion

  Hello

  I started to implement VMware in my company.

  I installed standard Vspahere 5 withouth any problem and made all configurations.

  For the moment I want to convert the physical server, the virtual machine and for this I have download VMware-converter stand alone.

  I fist he installed on a Windows 2008 server that I want to convert.

  The conversion was adopted without any error message but in the end the virtual machine cannot start normally.

  I have a blue screen with thos messages:

  "Launch Startup Repair tool" or "start windows normally".

  I converted to the other servers, but I don't know how to proceed with this error message.

  Please could someone help?

  Thank you

  Above all this happen, after the virtual machine is converted the selected SCSI adapter would be logical bus, because of which the VM throw a blue error screen.

  change the logic of the bus at LSI logic (windows 2 k 3, 2 k 8, vista)

  How to change see below KB:

  http://KB.VMware.com/kb/1002149

  Please allow points for correct/good answers by clicking on the tabs

• Update IOS without WIFI and not with an Itunes client connected (aka want to upgrade with a stand-alone itunes client) is it possible

  I work for an agency after the output of devices in our production environment, the IPad can be connected to wifi or an instance connected to iTunes. I want to update these devices, but as you can see in my first sentence the traditional way is not allowed from a security point of view. Any help would be greatly appreciated.

  Care - Apple IPad Air (1st generation)

  -in the course of running IOS 6.1.6

  -put to update to the current version

  Windows based ITunes (ready to use the version that is never recommended)

  There is a conflict here:

  -or an instance connected to iTunes

  -Windows based ITunes (ready to use the version that is never recommended)

  The second sentence implies that you intend to update via iTunes which is in conflict with the first part.

  What is the problem? You want to update the devices.  You can update without wifi.  There are two ways without wifi: cable ethernet or usb to a computer.

  {It is not a coincidence.  You can connect via ethernet cable.

  connect the ipad to ethernet }

  You must be careful with updates.  You can't go back after the update.  The importance is the iPad to your operation?  You can just buy a new ipad and Exchange once you think you have this work.

  R

• How can I register with several stand-alone

  Hello, I just bought the version creative cloud (PS and Lightroom) photographer and trying to connect with my PC and laptop.

  On the laptop is perfect, but when I downloaded the programs on my mac, it is only activated the trial version and not the full.

  Hello

  Please see the below help documents:

  Applications creative Cloud back in test mode after an update until 2015 for CC

  Solutions to connection errors, activation and connection with creative Cloud applications and Creative Suite

  Kind regards

  Sheena

• vCenter Ops Manager 5.6 with several stand-alone vCenters?

  We select various tools for monitoring my team and I have been instructed to resist an instance of vCOPs fast 5.6.  I deployed the vapp and applied the enterprise license key we have for assessment. I can add all vCenters within the environment and the UI shows they are connected and registered, but when I connect on the VI client and view of the plugin... I only see one of the vCenters (where the VAPP has been deployed) in the navigation tree.  VCOPs 5.6 only supports adding multiple vCenters in bound mode?  I can't find anything about the self-governments.

  It's vCOPs Manager 5.6 under vCenter 5.0.  Thank you for the insight.

  You'll want to connect the vSphere vcOps UI, not the VI client to see vCenters all connected. Try http://vcopsUIhost/vcops-vsphere

• 2 active-Stanby ASA 5585 with first CX Manager module each, they can reproduce without an external PRSM?

  Hello

  As I have said on the matter, the two CX are Single-device mode, and I do not see the menu device to add to another or something like that.

  The two meets all the conditions, one I installed latest version of premium (9.3.2.1 - 9) to be sure that it is up-to-date.

  Most documentation talking about how to add devices to a first 'external', but I do not have another license for that.

  The question is, can I put these modules CX in HA?

  Additional info:

  -they are hw modules.

  -the two enabled.

  -the two are the same material and has the same version.

  Thank you!

  Unfortunately, no.

  Synchronization between the configurations of modules CX in a pair of ASA HA (or any other deployment of several modules CX) requires first Security Manager (PRSM) on an external virtual computer (also known as the "out of area" multi-device mode or PRSM).

  Otherwise, you must manually configure each identically via their separate GUI PRSM ("local", the only device mode).

• I bought a stand-alone photoshop CS6, how can I be sure that it is legitimate

  I bought it on ebay and when I installed it I was not asked for a serial No.. ( 1380-*-*-*-*) after installation there is no option for registry, updates, disable.  The Red sticker of cello Adobe isn't a hologram her when I got this and I spoke to a representative of chat he said the ser # was invalid and I told the seller wanted to call Adobe Corp. Monday, he said

  
  

  "Is not a problem with the exception of a small hitch. I worked for Adobe for 8 years. (2004-2012) and how it works. They say no customer is as follows. They say SN is not valid, do you know why? They only really follow retail purchases and sales from their own Web site. So, let me know your thoughts. »

  I took when I received this email, as soon as I had paid for the drive.

  «PurchaseHello - thanks a lot for your Photoshop.» The tracking number has been loaded, the item is shipped and you should receive it sometimes very soon.
  Reminder, by registration, the software comes with a number of unused/original series that is embedded in the back of the DVD inlay but is automatically applied with the license during the initial installation. Your installation can be done quickly and easily while the 32 and 64 bit versions will load automatically and put a shortcut on your desktop for all of the two so you can choose which is best for you.
  Please let me know if you have questions and thank you again so very much.
  " Enjoy your new Photoshop '

  Is this true?  Doesn't have, I bought a pirate copy?

  
  

  
  

  [deleted] info series key... by moderator

  
  

  Answer is simple you have just made a slightly richer software thief. There is very little authentic Adobe resellers on ebay and even if you find a transfer of the property procedure is horrible. Take a look at this document published by ebay themselves

  How to buy or sell used Adobe software on eBay. eBay

  It would be inappropriate to ask how much you paid?

  Terri

• Acrobat CC request license check on each use for my teaching license.  It started when I updated my Lightroom 6 stand-alone installation.  How can I stop this?

  That's what I was able to identify online even if I don't think I'm a volume license customer.  My license is CC educational.

  "Some volume licensing customers see a license agreement on the launch of Adobe Acrobat electronic, and he invited them to download a license for the product to work.  Customers who experience this behavior generally were sent to the incorrect media. Although the solution below will fix the immediate problem, you work with customer relations team to ensure that you have the appropriate media. »

  Hi Gregg,

  Creative cloud users can download Acrobat DC using this link free Acrobat Pro DC | Download the free trial version Adobe Acrobat Pro DC.

  If asked to license key, please logout of one Cloud app create like Lightroom & sign in again once, this will activate the package of any creative cloud with Acrobat DC.

  Let me know if you still experience any problems while activating the DC of Acrobat.

  Kind regards

  Nicos

• How can I download a stand-alone copy so I can install on the web?

  I need to be able to do the installation on a Win 7 Desktop on a closed network.

  Unlike the response above, you should always download only of a link/site of Mozilla.

  You can download the full installer for the current version from the link below (select the language of the operating system and interface), save or copy on pin/thumb/USB, transport to the other installation system and run the installer.

  • https://www.Mozilla.org/en-us/Firefox/all.html

• Construction in real time of the table and the data tracing

  Hello

  I have a project in which I am waiting for a message from the chain coming to my serial port that contains two parameters of a voltage sensor compared to the position

  I will then draw two parameters for a XY chart as they arrived at my port to build a chart that is continuously updated with all the points came to the COM port (all from the position of the reading pressure readings).

  I know that to draw the two parameters against each other that I must use the XY-graph and for this, I have to insert my data in the tables first and then give them to the chart.

  The problem is that the message of the series is not at fixed intervals (for example a message now comes, the other may be after 1 minute, then another after one half minute.. .and so on). and the chart should be updated with the points once they arrive (in addition to displaying the previous points too of course).

  I don't know where to start! can someone put me on a track for it?

  Note: I have no problem with the interpretation of the data series, at the end I will have two numeric values which I'll then draw against each other

  Thank you

  One thing that I had not noticed before on your VI is that you use the wrong function when generating data in your table.  You should use table to build.  No insertion in the table which is more intended for stuff that goes in the middle of a table.  And the way you use it, you insert in fact data at the beginning and not at the end.

  I don't know what you have tried and why you think that the circular buffer is not what you want to do.

  Take a look for a function called data queue Pt by Pt that effectively does what you want.

  I will attach a Subvi I used.   I changed it to something that I found.  I think I found somewhere in LabVIEW itself, or an example, maybe the forums, but I can't find the original source.  And I don't see in the comments of the VI. (If anyone knows, please comment.)

• labview real-time clock display

  Hey dude, im doing a project on labview that I just want to make prettier for the speaker

  is it possible to add a clock to the façade that tell time, ideally in format:

  any help welcome

  Thank you

  Kevin

  Pretty cool Tim.  Here is an old floating around, I got that has a neat wooden face and the code is really simple.   It is in LV10.

• The ADF Stand ALone library

  I want, ADF of stand-alone library, so I can work on my own on a chassis development eclipse tomcat server.
  
  is it possible to find somewhere?
  
  Thank you
  
  Israel S Llorens

  What specific part of the ADF are you looking for?
  We do not have a packaging separated - but you can just pick up pots of either installing JDeveloper and ADF Faces of the download of the demo:

  http://www.Oracle.com/technology/products/ADF/adffaces/11/doc/demo/adf_faces_rc_demo.html

• Controller time real-time FieldPoint or Ethernet interface

  Good afternoon

  The first feature listed on the PS-2000 product page is:

• Stand-alone embedded real-time controller or on PC distributed i/o Ethernet interface.

Everyone was able incorporate a PS-2000 as an Ethernet on PC distributed i/o interface?  In other words, have the PS-2000 as a FP-1600 Act?

There are some discussions forum discussions that dance around the subject, but I found no really one who responds to her.

Thank you

Ed

Hi edlad,

After playing with a FP-2010 for a while, I think you need to install LabVIEW Real-time on the controller to make it work, even though you are technically not to use it because you are not running a VI/executable on the controller. Regarding your problem with the installation of LabVIEW 8.5.1 on a PS-2000, it is disturbing because it should not be a problem that at all. In fact, I have personally been able to install LabVIEW 8.5.1 on many FP of the 2000s. For that matter, I suggest reformatting of the PS-2000 of MAX and try again.

ThinkG: Regarding your question on the use of a PSC-2220 to connect with belvedere, I don't know because the support of Lookout is managed by our subsidiary in Shanghai by e-mail only. However, I don't know that you can use this second ethernet port to connect with another network (cFP-180 x) FieldPoint module using the FieldPoint drivers. Here are some good articles about this configuration knowledge base. I hope they are useful.

http://digital.NI.com/public.nsf/allkb/F602F6F1B243282686257495007695BB?OpenDocument

http://digital.NI.com/public.nsf/allkb/67F94BB93BCE32CF86257367006B3659?OpenDocument

Thanks for choosing National instruments.

Aaron Peña

National Instruments

Technical sales engineer

http://www.NI.com/support