Time Capsule: "...". total object 'Data' is not found.

I can't use my TC more because of this error. The TC appears in the sidebar, I can open the top-level window, but as soon as I want to mount the volume 'Data', there is this error.

Thanks a lot for the tips!

A good troubleshooting step base to occur with any connection problem as this is a complete network power cycle. If you have not already tried so, it would be a recommended method to start the process.

Power off all the devices on your network... modem, routers, computers, iPhones/iPads, printers, etc... in any order you want

Wait a minute

Turn on the modem first and leave a few minutes, he managed by itself

Then, turn on the next device that connects to the modem and leaves turn a good minute

Keep turn on devices one by one at a time, one minute apart, until the entire network is back

Check the network

Tags: Wireless

Similar Questions

Root/CIMV2, MSFT_NetInvalidDriverDependency, 0 x 80041002 - object (WBEM_E_NOT_FOUND) is not found.

I tried to rebuild WMI, but always with 30 errors

30469 16:21:35 (0) * WMIDiag v2.1 began Monday, July 9, 2012 at 4:15.
30470 16:21:35 (0) *.
30471 16:21:35 (0) * copyright (c) Microsoft Corporation. All rights reserved - July 2007.
30472 16:21:35 (0) *.
30473 16:21:35 (0) * this script is not supported under a Microsoft standard support program or service.
30474 16:21:35 (0) * the script is provided AS IS, without warranty of any kind. Microsoft disclaims any
30475 16:21:35 (0) * implied warranties, including, without limitation, implied guarantees of marketability
30476 16:21:35 (0) * or adequacy has a particular use. The entire risk arising out of use or performance
30477 16:21:35 (0) * scripts and documentation remains with you. In any case, Microsoft, its authors,.
30478 16:21:35 (0) * or anyone involved in the creation, production or delivery of the script is responsible for
30479 16:21:35 (0) * damage whatsoever (including, without limitation, damages for loss of business profits,
30480 16:21:35 (0) * business interruption, loss of business information or any other pecuniary loss) arising out of
30481 16:21:35 (0) * the use or inability to use the script or documentation, even if Microsoft has been advised
30482 16:21:35 (0) * of the possibility of such damages.
30483 16:21:35 (0) *.
30484 16:21:35 (0) *.
30485 16:21:35 (0) ** ----------------------------------------------------------------------------------------------------------------------------------
30486 16:21:35 (0) ** ----------------------------------------------------- WMI REPORT: BEGIN ----------------------------------------------------------
30487 16:21:35 (0) ** ----------------------------------------------------------------------------------------------------------------------------------
30488 16:21:35 (0) *.
30489 16:21:35 (0) ** ----------------------------------------------------------------------------------------------------------------------------------
30490 16:21:35 (0) * Windows Server 2008 R2 - Service pack 1 - user 64-bit (7601) - "MGATE\ECIADMIN" on the computer "BES".
30491 16:21:35 (0) ** ----------------------------------------------------------------------------------------------------------------------------------
30492 16:21:35 (0) ** INFO: Environment: .................................................................................................. 1 ARTICLE (S)!
30493 16:21:35 (0) * INFO:-online 4 shutdown (s) incorrect possible detected on:
30494 16:21:35 (0) *-stop on January 19, 2012 23:30:23 (GMT-0).
30495 16:21:35 (0) *-stop on January 19, 2012 23:50:41 (GMT-0).
30496 16:21:35 (0) *-stop on February 9, 2012 15:37:35 (GMT-0).
30497 16:21:35 (0) *-stop on July 7, 2012 00:58:51 (GMT-0).
30498 16:21:35 (0) *.
30499 16:21:35 (0) ** System drive: ....................................................................................................... C: (Disk Partition #0 #1).
30500 16:21:35 (0) ** Drive type: ......................................................................................................... SCSI (virtual disk VMware SCSI Disk Device).
30501 16:21:35 (0) * there is no missing file of WMI system:... Ok.
30502 16:21:35 (0) * there is no missing WMI repository files:... Ok.
30503 16:21:35 (0) * WMI repository state:... MORE LOGIC.
30504 16:21:35 (0) * AFTER you run WMIDiag:
30505 16:21:35 (0) * repository WMI has a size of:... 19 MB.
30506 16:21:35 (0) *-free space on the "C:" drive:... 22250 MB.
30507 16:21:35 (0) *-INDEX. BTR, 4349952 bytes, 09/07/2012 16:16:50
30508 16:21:35 (0) *-MAPPING1. CARD, 51804 bytes, 07/09/2012-16:16:50
30509 16:21:35 (0) *-MAPPING2. CARD, 51804 bytes, 07/09/2012-14:23:20
30510 16:21:35 (0) *-OBJECTS. DATA, 15515648 bytes, 09/07/2012 16:16:50
30511 16:21:35 (0) ** ----------------------------------------------------------------------------------------------------------------------------------
30512 16:21:35 (2)! WARNING: Windows Firewall: .......................................................................................... PEOPLE WITH DISABILITIES.
30513 16:21:35 (0) ** ----------------------------------------------------------------------------------------------------------------------------------
30514 16:21:35 (0) ** DCOM Status: ........................................................................................................ Ok.
30515 16:21:35 (0) * Registry WMI configuration:... Ok.
30516 16:21:35 (0) * INFO: WMI service has dependents:... 1 SERVICE (S)!
30517 16:21:35 (0) *-(ICS) (SHAREDACCESS, StartMode = 'Disabled') Internet connection sharing
30518 16:21:35 (0) *-online if the WMI service is stopped, or the services listed should be stopped as well.
30519 16:21:35 (0) * note: If the service is marked with a (*), this means that the service application / use WMI, but
30520 16:21:35 (0) * there is no hard dependency on WMI. However, if the WMI service is stopped.
30521 16:21:35 (0) * this can prevent the application of service / to work as expected.
30522 16:21:35 (0) *.
30523 16:21:35 (0) ** RPCSS service: ...................................................................................................... OK (already begun).
30524 16:21:35 (0) ** WINMGMT service: .................................................................................................... OK (already begun).
30525 16:21:35 (0) ** ----------------------------------------------------------------------------------------------------------------------------------
30526 16:21:35 (0) * for the WMI service DCOM configuration:... Ok.
30527 16:21:35 (0) * components WMI DCOM registrations:... Ok.
30528 16:21:35 (0) * records WMI ProgID:... Ok.
30529 16:21:35 (2)! WARNING: WMI provider DCOM missing registrations for the following providers:... 3 WARNING (S)!
30530 16:21:35 (0) *-ROOT/SNMP/LOCALHOST, MS_SNMP_REFERENT_EVENT_PROVIDER ({9D5BED16-0765-11D1-AB2C-00C04FD9159E})
30531 16:21:35 (0) * the provider DLL: "
30532 16:21:35 (0) *-ROOT/SNMP/LOCALHOST, MS_SNMP_CLASS_PROVIDER ({70426720-F78F-11CF-9151-00AA00A4086C})
30533 16:21:35 (0) * the provider DLL: "
30534 16:21:35 (0) *-ROOT/SNMP/LOCALHOST, MS_SNMP_ENCAPSULATED_EVENT_PROVIDER ({19C813AC-FEE7-11D0-AB22-00C04FD9159E})
30535 16:21:35 (0) * the provider DLL: "
30536 16:21:35 (0) * => this is a problem because there are still some WMI classes referencing this list of suppliers
30537 16:21:35 (0) * while the DCOM registration is incorrect or missing. This may be due to:
30538 16:21:35 (0) *-an uninstall of the software.
30539 16:21:35 (0) *-a deletion of some data to registry keys.
30540 16:21:35 (0) *-a corruption of the registry.
30541 16:21:35 (0) * =>, you can correct the DCOM configuration by:
30542 16:21:35 (0) *-running "REGSVR32. EXE ' command.
30543 16:21:35 (0) * note: you can create a list of classes in relation to the WMI provider and the MOF with WMIDiag file.
30544 16:21:35 (0) * (this list can be built on a WMI Windows similar and functional installation)
30545 16:21:35 (0) * the following command line must be used:
30546 16:21:35 (0) * i.e. "WMIDiag CorrelateClassAndProvider.
30547 16:21:35 (2)! WARNING: The re-registration with REGSVR32. EXE DLL all the of 'C:\WINDOWS\SYSTEM32\WBEM\ '.
30548 16:21:35 (0) * can not solve the problem as the DLL supporting the WMI classes
30549 16:21:35 (0) * can be located in a different folder.
30550 16:21:35 (0) * you must consult the class name to determine the software providing the associated DLL.
30551 16:21:35 (0) *-online if the software has been uninstalled intentionally, so this information must be
30552 16:21:35 (0) * deleted of the WMI repository. You can use the "WMIC. EXE' command to remove
30553 16:21:35 (0) * registration of provider data.
30554 16:21:35 (0) * i.e. ' WMIC. EXE /NAMESPACE:\\ROOT\SNMP\LOCALHOST path __Win32Provider Where Name = 'MS_SNMP_ENCAPSULATED_EVENT_PROVIDER' DELETE'
30555 16:21:35 (0) *-online if namespace was ENTIRELY dedicated to the intentionally, uninstalled software
30556 16:21:35 (0) * the namespace and ALL of its content can be ENTIRELY deleted.
30557 16:21:35 (0) * i.e. ' WMIC. EXE /NAMESPACE:\\ROOT\SNMP path __NAMESPACE Where Name = 'LOCALHOST' DELETE'
30558 16:21:35 (0) * - re - install the software.
30559 16:21:35 (0) *.
30560 16:21:35 (0) * registrations CIM WMI provider:... Ok.
30561 16:21:35 (0) * provider WMI CLSID:... Ok.
30562 16:21:35 (0) * availability EXE/DLL WMI providers:... Ok.
30563 16:21:35 (0) ** ----------------------------------------------------------------------------------------------------------------------------------
30564 16:21:35 (0) * INFO: User Account Control (UAC):... PEOPLE WITH DISABILITIES.
30565 16:21:35 (0) * INFO: filtering Local account:... PERMIT.
30566 16:21:35 (0) *-online tasks WMI to access WMI information on this computer and that requires remote administration
30567 16:21:35 (0) * privileges SHOULD use part of the DOMAIN of the Local computer administrators group account
30568 16:21:35 (0) * to ensure that the privileges are granted. If a Local user account is used for outdoor
30569 16:21:35 (0) * access, it will be reduced to a simple user (filtered token), even if it is part of the Local Administrators group.
30570 16:21:35 (0) *.
30571 16:21:35 (0) * global DCOM security status:... Ok.
30572 16:21:35 (0) * overall WMI decision:... Ok.
30573 16:21:35 (0) ** - Started at 'Root' --------------------------------------------------------------------------------------------------------------
30574 16:21:35 (0) * INFO: SUBSCRIPTION permanent WMI (S):... 1.
30575 16:21:35 (0) *-ROOT/SUBSCRIPTION, consumption of NTEventLogEventConsumer.Name event log = "SCM".
30576 16:21:35 (0) * ' select * from MSFT_SCMEventLogEvent'
30577 16:21:35 (0) *.
30578 16:21:35 (0) * WMI TIMER method:... NONE.
30579 16:21:35 (0) * INFO: WMI or requiring a CONFIDENTIALITY of the PACKAGE:... 2 NAMESPACE (S)!
30580 16:21:35 (0) *-ROOT/CIMV2/SECURITY/MICROSOFTTPM.
30581 16:21:35 (0) *-ROOT/CIMV2/TERMINALSERVICES.
30582 16:21:35 (0) * => when connecting remotely, the or listed have the WMI client
30583 16:21:35 (0) * use an encrypted connection by specifying the level of CONFIDENTIALITY of the PACKET authentication.
30584 16:21:35 (0) * (RPC_C_AUTHN_LEVEL_PKT_PRIVACY or PktPrivacy flags)
30585 16:21:35 (0) * i.e. ' WMIC. EXE/node: "NYBES' /AUTHLEVEL:Pktprivacy /NAMESPACE:\\ROOT\CIMV2\TERMINALSERVICES Class __SystemSecurity'
30586 16:21:35 (0) *.
30587 16:21:35 (0) * THE WMI MONIKER CONNECTIONS:... Ok.
30588 16:21:35 (0) ** WMI CONNECTIONS: .................................................................................................... Ok.
30589 16:21:35 (1). ERROR: WMI GET operation reported errors:... ERROR 32 (S)!
30590 16:21:35 (0) * - Root/CIMV2, MSFT_NetInvalidDriverDependency, 0 x 80041002 - object (WBEM_E_NOT_FOUND) is not found.
30591 16:21:35 (0) * MOF registration: "
30592 16:21:35 (0) * - Root/CIMV2, Win32_OsBaselineProvider, 0 x 80041002 - object (WBEM_E_NOT_FOUND) is not found.
30593 16:21:35 (0) * MOF registration: "
30594 16:21:35 (0) * - Root/CIMV2, Win32_OsBaseline, 0 x 80041002 - object (WBEM_E_NOT_FOUND) is not found.
30595 16:21:35 (0) * MOF registration: "
30596 16:21:35 (0) * - Root/CIMV2, Win32_DriverVXD, 0 x 80041002 - object (WBEM_E_NOT_FOUND) is not found.
30597 16:21:35 (0) * MOF registration: "
30598 16:21:35 (0) * - Root/CIMV2, Win32_PerfFormattedData_BITS_BITSNetUtilization, 0 x 80041002 - object (WBEM_E_NOT_FOUND) is not found.
30599 16:21:35 (0) * MOF registration: "
30600 16:21:35 (0) * - Root/CIMV2, Win32_PerfRawData_BITS_BITSNetUtilization, 0 x 80041002 - object (WBEM_E_NOT_FOUND) is not found.
30601 16:21:35 (0) * MOF registration: "
30602 16:21:35 (0) * - Root/CIMV2, Win32_PerfFormattedData_Counters_GenericIKEandAuthIP, 0 x 80041002 - object (WBEM_E_NOT_FOUND) is not found.
30603 16:21:35 (0) * MOF registration: "
30604 16:21:35 (0) * - Root/CIMV2, Win32_PerfRawData_Counters_GenericIKEandAuthIP, 0 x 80041002 - object (WBEM_E_NOT_FOUND) is not found.
30605 16:21:35 (0) * MOF registration: "
30606 16:21:35 (0) * - Root/CIMV2, Win32_PerfFormattedData_Counters_IPsecAuthIPv4, 0 x 80041002 - object (WBEM_E_NOT_FOUND) is not found.
30607 16:21:35 (0) * MOF registration: "
30608 16:21:35 (0) * - Root/CIMV2, Win32_PerfRawData_Counters_IPsecAuthIPv4, 0 x 80041002 - object (WBEM_E_NOT_FOUND) is not found.
30609 16:21:35 (0) * MOF registration: "
30610 16:21:35 (0) * - Root/CIMV2, Win32_PerfFormattedData_Counters_IPsecAuthIPv6, 0 x 80041002 - object (WBEM_E_NOT_FOUND) is not found.
30611 16:21:35 (0) * MOF registration: "
30612 16:21:35 (0) * - Root/CIMV2, Win32_PerfRawData_Counters_IPsecAuthIPv6, 0 x 80041002 - object (WBEM_E_NOT_FOUND) is not found.
30613 16:21:35 (0) * MOF registration: "
30614 16:21:35 (0) * - Root/CIMV2, Win32_PerfFormattedData_Counters_IPsecIKEv4, 0 x 80041002 - object (WBEM_E_NOT_FOUND) is not found.
30615 16:21:35 (0) * MOF registration: "
30616 16:21:35 (0) * - Root/CIMV2, Win32_PerfRawData_Counters_IPsecIKEv4, 0 x 80041002 - object (WBEM_E_NOT_FOUND) is not found.
30617 16:21:35 (0) * MOF registration: "
30618 16:21:35 (0) * - Root/CIMV2, Win32_PerfFormattedData_Counters_IPsecIKEv6, 0 x 80041002 - object (WBEM_E_NOT_FOUND) is not found.
30619 16:21:35 (0) * MOF registration: "
30620 16:21:35 (0) * - Root/CIMV2, Win32_PerfRawData_Counters_IPsecIKEv6, 0 x 80041002 - object (WBEM_E_NOT_FOUND) is not found.
30621 16:21:35 (0) * MOF registration: "
30622 16:21:35 (0) * - Root/CIMV2, Win32_PerfFormattedData_TermService_TerminalServices, 0 x 80041002 - object (WBEM_E_NOT_FOUND) is not found.
30623 16:21:35 (0) * MOF registration: "
30624 16:21:35 (0) * - Root/CIMV2, Win32_PerfRawData_TermService_TerminalServices, 0 x 80041002 - object (WBEM_E_NOT_FOUND) is not found.
30625 16:21:35 (0) * MOF registration: "
30626 16:21:35 (0) * - root/WMI, ReserveDisjoinThread, 0 x 80041002 - object (WBEM_E_NOT_FOUND) is not found.
30627 16:21:35 (0) * MOF registration: "
30628 16:21:35 (0) * - root/WMI, ReserveLateCount, 0 x 80041002 - object (WBEM_E_NOT_FOUND) is not found.
30629 16:21:35 (0) * MOF registration: "
30630 16:21:35 (0) * - root/WMI, ReserveJoinThread, 0 x 80041002 - object (WBEM_E_NOT_FOUND) is not found.
30631 16:21:35 (0) * MOF registration: "
30632 16:21:35 (0) * - root/WMI, ReserveDelete, 0 x 80041002 - object (WBEM_E_NOT_FOUND) is not found.
30633 16:21:35 (0) * MOF registration: "
30634 16:21:35 (0) * - root/WMI, ReserveBandwidth, 0 x 80041002 - object (WBEM_E_NOT_FOUND) is not found.
30635 16:21:35 (0) * MOF registration: "
30636 16:21:35 (0) * - root/WMI, ReserveCreate, 0 x 80041002 - object (WBEM_E_NOT_FOUND) is not found.
30637 16:21:35 (0) * MOF registration: "
30638 16:21:35 (0) * - root/WMI, SystemConfig_PhyDisk, 0 x 80041002 - object (WBEM_E_NOT_FOUND) is not found.
30639 16:21:35 (0) * MOF registration: "
30640 16:21:35 (0) * - root/WMI, SystemConfig_Video, 0 x 80041002 - object (WBEM_E_NOT_FOUND) is not found.
30641 16:21:35 (0) * MOF registration: "
30642 16:21:35 (0) * - root/WMI, SystemConfig_IDEChannel, 0 x 80041002 - object (WBEM_E_NOT_FOUND) is not found.
30643 16:21:35 (0) * MOF registration: "
30644 16:21:35 (0) * - root/WMI, SystemConfig_NIC, 0 x 80041002 - object (WBEM_E_NOT_FOUND) is not found.
30645 16:21:35 (0) * MOF registration: "
30646 16:21:35 (0) * - root/WMI, SystemConfig_Network, 0 x 80041002 - object (WBEM_E_NOT_FOUND) is not found.
30647 16:21:35 (0) * MOF registration: "
30648 16:21:35 (0) * - root/WMI, SystemConfig_CPU, 0 x 80041002 - object (WBEM_E_NOT_FOUND) is not found.
30649 16:21:35 (0) * MOF registration: "
30650 16:21:35 (0) * - root/WMI, SystemConfig_LogDisk, 0 x 80041002 - object (WBEM_E_NOT_FOUND) is not found.
30651 16:21:35 (0) * MOF registration: "
30652 16:21:35 (0) * - root/WMI, SystemConfig_Power, 0 x 80041002 - object (WBEM_E_NOT_FOUND) is not found.
30653 16:21:35 (0) * MOF registration: "
30654 16:21:35 (0) *-online performance when WMI class is missing (for example "Win32_PerfRawData_TermService_TerminalServices"), it is usually due to
30655 16:21:35 (0) * a lack of refresh of the buffer of the WMI provider class exposing WMI performance counters.
30656 16:21:35 (0) * you can update the WMI provider class buffer with the following command:
30657 16:21:35 (0) *.
30658 16:21:35 (0) * i.e. "WINMGMT. EXE /SYNCPERF'
30659 16:21:35 (0) *.
30660 16:21:35 (0) * representations WMI MOF:... Ok.
30661 16:21:35 (0) * WMI QUALIFIER access operations:... Ok.
30662 16:21:35 (0) * WMI ENUMERATION operations:... Ok.
30663 16:21:35 (2)! WARNING: Operation WMI EXECQUERY reported errors:... 1 WARNING (S)!
30664 16:21:35 (0) *-Root/CIMV2, ' Select * from Win32_USBController' did not return any instance while the instance at LEAST 1.
30665 16:21:35 (0) *.
30666 16:21:35 (2)! WARNING: GET the VALUE WMI operation reported errors:... 5 WARNING (S)!
30667 16:21:35 (0) *-root, example: __EventConsumerProviderCacheControl = @, property: ClearAfter = "00000000000030.000000:000" (expected default = "00000000000500.000000:000").
30668 16:21:35 (0) *-root, example: __EventProviderCacheControl = @, property: ClearAfter = "00000000000030.000000:000" (expected default = "00000000000500.000000:000").
30669 16:21:35 (0) *-root, example: __EventSinkCacheControl = @, property: ClearAfter = "00000000000015.000000:000" (expected default = "00000000000230.000000:000").
30670 16:21:35 (0) *-root, example: __ObjectProviderCacheControl = @, property: ClearAfter = "00000000000030.000000:000" (expected default = "00000000000500.000000:000").
30671 16:21:35 (0) *-root, example: __PropertyProviderCacheControl = @, property: ClearAfter = "00000000000030.000000:000" (expected default = "00000000000500.000000:000").
30672 16:21:35 (0) *.
30673 16:21:35 (0) * WRITE WMI operations:... NOT TESTED.
30674, 16:21:35 (0) * WMI PUT operations:... NOT TESTED.
30675 16:21:35 (0) * WMI DELETE operations:... NOT TESTED.
30676 16:21:35 (0) * the static instances of WMI retrieved:... 1934.
30677 16:21:35 (0) * WMI dynamic instances retrieved:... 0.
30678 16:21:35 (0) * WMI instance request cancellations (to limit the performance impact):... 1.
30679 16:21:35 (0) ** ----------------------------------------------------------------------------------------------------------------------------------
30680 16:21:35 (0) * number of events in the event log BEFORE run WMIDiag since the last 20 day (s):
30681 16:21:35 (0) **   DCOM: ............................................................................................................. 0.
30682 16:21:35 (0) **   WINMGMT: .......................................................................................................... 0.
30683 16:21:35 (0) **   WMIADAPTER: ....................................................................................................... 0.
30684 16:21:35 (0) *.
30685 16:21:35 (0) * number of events AFTER you run WMIDiag additional event log:
30686 16:21:35 (0) **   DCOM: ............................................................................................................. 0.
30687 16:21:35 (0) **   WINMGMT: .......................................................................................................... 0.
30688 16:21:35 (0) **   WMIADAPTER: ....................................................................................................... 0.
30689 16:21:35 (0) *.
30690 16:21:35 (0) * 32 error (s) 0 x 80041002 - (WBEM_E_NOT_FOUND) object not found
30691 16:21:35 (0) *-online this error is usually a WMI error. This WMI error is due to:
30692 16:21:35 (0) *-a missing definition of WMI class or object.
30693 16:21:35 (0) * (see any failure of a GET operation, ENUMERATION, EXECQUERY and GET the VALUE).
30694 16:21:35 (0) * you can correct the missing class definitions by:
30695 16:21:35 (0) *-the MOF file (s) recompile manually with the command "MOFCOMP .
30696 16:21:35 (0) * note: you can create a list of classes in relation to the WMI provider and the MOF with WMIDiag file.
30697 16:21:35 (0) * (this list can be built on a WMI Windows similar and functional installation)
30698 16:21:35 (0) * the following command line must be used:
30699 16:21:35 (0) * i.e. "WMIDiag CorrelateClassAndProvider.
30700 16:21:35 (0) * note: when a WMI class performance class is missing, you can manually resynchronize the performance counters
30701 16:21:35 (0) * with WMI by starting the ADAP process.
30702 16:21:35 (0) *-a corruption of WMI repository.
30703 16:21:35 (0) * in such a case, you must re-run the WMIDiag with the parameter "WriteInRepository.
30704 16:21:35 (0) * to validate the WMI repository operations.
30705 16:21:35 (0) * note: make sure THAT you are an administrator with FULL access to ALL WMI of the computer before namespaces
30706 16:21:35 (0) * the WriteInRepository command. To write temporary data of the root namespace, use:
30707 16:21:35 (0) * i.e. 'WMIDiag WriteInRepository = Root'
30708 16:21:35 (0) *-if the WriteInRepository command fails, while an administrator with all access to all namespaces
30709 16:21:35 (0) * the WMI repository needs to be rebuilt.
30710 16:21:35 (0) * note: rebuilding the WMI repository is required to locate all MOF files that are needed to rebuild the repository.
30711 16:21:35 (0) * otherwise, some applications may fail after the reconstruction.
30712 16:21:35 (0) * this can be achieved with the following command:
30713 16:21:35 (0) * i.e. "WMIDiag ShowMOFErrors.
30714 16:21:35 (0) * note: the reconstruction of the repository should be a solution of LAST RESORT and ONLY after execution
30715 16:21:35 (0) * all patches previously mentioned.
30716 16:21:35 (2)! WARNING: Static information stored by external applications in the repository will be LOST! (e.g., the SMS inventory)
30717 16:21:35 (0) *.
30718 16:21:35 (0) ** ----------------------------------------------------------------------------------------------------------------------------------
30719 16:21:35 (0) * unexpected, registry keys values incorrect or absent:... 1 KEY (S)!
30720 16:21:35 (0) * INFO: unexpected registry key value:
30721 16:21:35 (0) *-current: HKLM\SOFTWARE\Microsoft\WBEM\CIMOM\Logging (REG_SZ)-> 0
30722 16:21:35 (0) *-expected: HKLM\SOFTWARE\Microsoft\WBEM\CIMOM\Logging (REG_SZ)-> 1
30723 16:21:35 (0) * from the command line, the configuration of the registry can be corrected with the following command:
30724 16:21:35 (0) * i.e. ' Reg. Add EXE /v "HKLM\SOFTWARE\Microsoft\WBEM\CIMOM", "Registration" t "REG_SZ" d '1' f'
30725 16:21:35 (0) *.
30726 16:21:35 (0) ** ----------------------------------------------------------------------------------------------------------------------------------
30727 16:21:35 (0) ** ----------------------------------------------------------------------------------------------------------------------------------
30728 16:21:35 (0) ** ----------------------------------------------------------------------------------------------------------------------------------
30729 16:21:35 (0) ** ----------------------------------------------------------------------------------------------------------------------------------
30730 16:21:35 (0) *.
30731 16:21:35 (0) ** ----------------------------------------------------------------------------------------------------------------------------------
30732 16:21:35 (0) ** ------------------------------------------------------ WMI REPORT: END -----------------------------------------------------------
30733 16:21:35 (0) ** ----------------------------------------------------------------------------------------------------------------------------------
30734 16:21:35 (0) *.
30735 16:21:35 (0) * ERROR: detected WMIDiag to problems that could prevent WMI works properly! Check ' C:\USERS\ECIADMIN\APPDATA\LOCAL\TEMP\WMIDIAG-V2.1_2K8R2. SRV. SP1.64_NYBES_2012.07.09_16.15.16.log' for more details.
30736 16:21:35 (0) *.
30737 16:21:35 (0) * WMIDiag v2.1 ended Monday, July 9, 2012 at 16:21 (s: 1 W:79 E:38).

Hi Jimmy Wang ,

I wish you post your question in the TechNet Forums because it caters to an audience of professionals .

To do this, you must refer to the below mentioned link.

http://social.technet.Microsoft.com/forums/en-us/categories/

Hope this helps!

could not clean the file history data element not found in windows 8

My drive hard ext fills, and when I try to clean the first versions or any version I get the same message "could not clean the file history data element not found in windows 8" I don't know if there is a corrupted file. The only thing I have not done is to delete the entire folder FileHistory ext drive and start again.

Hey Daley,

If there are errors in your player in the history of the files that need to be repaired, try to repair your disk
1. Open the Center of the Action drag from the edge right screen, quilting search (or if you use a mouse, pointing to the top right of the screen, move the pointer of the mouse down and then clicking search), entering in the center of Action in the search box, type or by clicking settings and then by typing or clicking on the center of Action.
2. Tap or click repair.
Warning of Chkdsk.

Important: When running chkdsk on the drive if bad sectors are found on the disk hard when chkdsk attempts to repair this area if all available on which data can be lost.

Reference:

What happens if something is wrong in the history of the files?

Please post back with more information and the status of the issue.

Metadata of data user not found! -read the problem of network with Netbeans
Hi all,

I have Oracle11gR2 and Fedora 13 operating system.
I have to do the analysis (in the calculation of the shortest path) on a network with IFN.
I'll use the APIs of LOD, but the network is not yet partitioned.
Before partitioning, I want to see if Netbeans can read my network. When I run the code to do this:
```
String url = "jdbc:oracle:thin:@IP_of_machine:1521:dbSID";

    try {

                Class.forName("oracle.jdbc.OracleDriver").newInstance();
                
                Connection conn = DriverManager.getConnection(url,"italia","italia");
                System.out.println("Connect to Database");
                conn.setAutoCommit(false);
   
                Network net = NetworkManager.readNetwork(conn, "ITALY_NET");
                System.out.println("Network has been read");
```
but the output is:

run:
Connect to the database

oracle.spatial.network.NetworkDataException: oracle.spatial.network.NetworkDataException: user not found data metadata!
at oracle.spatial.network.NetworkAdapterSDO.readNetwork(NetworkAdapterSDO.java:792)
at oracle.spatial.network.NetworkAdapterSDO.readNetwork(NetworkAdapterSDO.java:552)
at oracle.spatial.network.NetworkManager.readNetwork(NetworkManager.java:176)
to calcolopercorso. Main.main (hand. Java:62)
Caused by: oracle.spatial.network.NetworkDataException: user not found data metadata!
to oracle.spatial.network.UserDataMetadataImpl. < init > (UserDataMetadataImpl.java:108)
to oracle.spatial.network.NetworkMetadataImpl. < init > (NetworkMetadataImpl.java:585)
at oracle.spatial.network.NetworkAdapterSDO.readNetworkMetadata(NetworkAdapterSDO.java:4148)
at oracle.spatial.network.NetworkAdapterSDO.readNetwork(NetworkAdapterSDO.java:766)
... 3 more
BUILD successful (total time: 1 second)

It has successfully connected to the database, but I have error when it should read the network
What am I wrong?
Thank you much in advance.

Published by: crystal13 on Sep 16, 2010 03:05

Note that network has been properly validated:
```
SQL> SELECT SDO_NET.VALIDATE_NETWORK('ITALY_NET') FROM DUAL;
```
SDO_NET. VALIDATE_NETWORK ('ITALY_NET')
--------------------------------------------------------------------------------
TRUE
It seems that you have probably set user_defined_data 'Y', but do not fill your data defined by the user to the user_sdo_network_user_data.

Follow these steps:
```
select network,user_defined_data from user_sdo_network_metadata where network = 'ITALY_NET';
```
If user_defined_data is set to 'Y', you can set it to "n" then IFN will no definition of user data search in user_sdo_network_user_data.
If you intend to use your network user data, you must set user_defined_data 'Y' and
fill your user data information in user_sdo_network_user_data.
```
desc user_sdo_network_user_data;
```
You can get the user to more data information form the white paper in ndm_whitepaper_11gR2 under the Section of the data defined by the user.
https://spatial.SampleCode.Oracle.com/servlets/ProjectProcess?PageID=0Zl7oV

I guess you know you use the API in memory of 10g instead of the API of NDM LOD 11 g.

Jack

Extraction of files from a time capsule that contains data of 3 different MacBooks. If I added a new macbook but I wanted only to select files. How can I find these files?

If I have 3 different MacBooks stored on time capsule but I want only to add the files selected to a new macbook how I do it,

find and retrieve files from these devices? How to retrieve the complete set of files for an individual device?

If I wanted to get back anything, what is the process for this?

Thank you

Bill

The correct method is to migrate. Use the migration assistant in the Utilities folder.

However migrate doesn't have the fine selection you're after, if you do not want the entire folder like documents.

You could find to manual aperture and copy the sparsebundle to Time Machine works ok... Use just traverse other disks of the main options of TM TM it in the dock.

It might not allow you to recover files but I found that I could copy them into TM and then paste the files by jumping out to finder.

Or you can migrate to another place is to say USB drive plugged into the computer and then retrieve files in a simple copy and paste... Although permissions can be a pain, and you must correct them before you can copy stuff to your own computer files.

How to share a Time Capsule airport directory (/ Data / media /) with an OPPO BDP - 103 Blu - Ray player with Ethernet (no Wi - Fi) connections?

I have an OPPO BDP - 103 Blu - Ray player connected to my LAN via ethernet cable. I also have an airport Time Capsule (APTC) connected by ethernet to my local network cable.

In addition to the use of PACT as a backup Time Machine for my MacBook, I have a few movies and photos in the directory/data/media /. What should I do so that the law of the APTC as a media server to serve/data/Media/and the files in the hierarchy of files in this directory to the BDP-103? I don't have a wireless adapter for the BDP-103.

Note that I use OS X El Capitan on my MacBook Pro, but I don't want to get involved them in this. I want to just serve you directly the files on CLTS CLTS.

You can't do it unless the Blu - Ray player is a complete multimedia player.

Apple have no extension of media in a TC... No... nothing... zero... Nothingness... elodie... not a thing.

BTW, Apple do not support DLNA who need of most TV/media players... so they never get to add it in the future either.

To play media files on a TC you can use a WD TV live... because it's a media player... and he can read raw files... not only DLNA used media.

What Apple is nothing without iTunes.

Cannot access hard drive Time Capsule... Password not accepted

The device ' Time Capsule 802.11n (3rd generation).

Subject: Unable to connect to the HD TC

I've reconfigured our old Time Capsule (CT) for use by my daughter dependent of the College. What with the TC seems to work fine (IE. Internet access and WIFI configured etc...). I reformatted the HD to start from scratch. And last updated as indicated by the Airport utility application. The intention is to create a new WIFI area with backup (Time Machine).

When you set up Time Machine I stressed the internal HD of TC, and then it says "connecting to etc...". After a few seconds, a new mold box presents itself to ' enter your password for the server (name of TC) for Time Machine can access. I enter the HD password I had setup in Airport utility with nothing doesn't. I checked all passwords with Airport utility "Show passwords". Tried all the passwords, and of course which none worked. And Yes, I even try the previous passwords even if I had changed their

I noticed that using the Airport 6.3.5 utility running on my OS X 10.10.5 machine I can see and change the TC. But when I use another computer running 10.11.6 is the Airport 6.3.6 utility does not see the TC?

Thoughts and comments please?

Next step may be reset to the factory settings, but feel something going on here...

Thank you

Kind regards

Roger

(1) try to reset the password for the utility disk AirPort

(2) open TextEdit on the Mac and type the password in plain text in an editor window. This will allow you to ensure that all the keys on the keyboard are recognized. I've seen cases where passwords fail again and again because of a problem with a wrong key on the keyboard or a habit of typing that makes you believe that you enter the password one way, but the result is something else. Be able to actually see that typed password allows to check that.

Constant problem: first time, a link is clicked: server not found. Refresh page and the server is immediately.

Foxfire regularly gives me the error message: server not found - BUT if I hit refresh, the server 'not found' opens immediately 99.9% of the time. It's really annoying. Happens several times per session, but not every time I click on a link.

Maybe you have a problem with IPv6.

See http://kb.mozillazine.org/Error_loading_websites

I'm a simple boy from desktop with an error Access 2002 method or data member not found

Hi, recently had 2 of the 3 stations imagined DAO2535 error, get compilation error now (fixed reference to DAO3.6).

all stations have the same version of front end using xp 2002, access 2002. The Station who works has sp2 installed, others have recently installed sp3 ahd. I am a boy of simple office with little experience on this type of program coding. I did not write it of course.

Here is the code where the failure occurs... any help would be appreciated.

Option Compare Database
Option Explicit

Public void GlobalFormOpen (MyParentName As String, MyFormName As String) As Boolean
' MyParentName is no longer necessary with subforms, otherwise use GlobalFormOpen ' ","formname ".
' Static variables to ensure that the dlookups are made only once (the first time this function is called).
' The dlookups are also performed when this function is called as GlobalFormOpen ' ', ' ' (of the merger).

Dim ctl As Control, frm As Form
Static MyDetailColor As Long, MyHeaderColor As Long, MyFooterColor As Long, MyTextBoxColor As Long, MySpecEffect As Integer, MyBordStyle As Integer, MyBackStyle
' Stop

If MyDetailColor = 0 or MyFormName = "" then
Dim db As Database, rs As Recordset
Set db = CurrentDb
Set rs = db. OpenRecordset ("qUser")
If Not rs. When the EOF
MyDetailColor = rs. DetailColor
MyHeaderColor = rs. HeaderColor
MyFooterColor = rs. FooterColor
MyTextBoxColor = rs. TextBoxColor
MySpecEffect = rs. SpecEffect
MyBordStyle = rs. BordStyle
MyBackStyle = rs. BackStyle
On the other
MyDetailColor =-2147483633
MyHeaderColor =-2147483633
MyFooterColor =-2147483633
MyTextBoxColor = vbWhite
MySpecEffect = 0
MyBordStyle = 1
MyBackStyle = 1
End If
Set rs = Nothing
Set db = Nothing
End If
If MyFormName <> "" then
If MyParentName = "" then
Set frm = Forms (MyFormName)
On the other
Set frm = Forms (MyParentName) (MyFormName). Form
End If
On Error Resume Next
If Nz (InStr (frm. Section (0). (Tag, 'NoFormat')) = 0 then frm. Section (0). BackColor = MyDetailColor
If Nz (InStr (frm. Section (0). (Tag, 'NoFormat')) = 0 then frm. Section (1). BackColor = MyHeaderColor
If Nz (InStr (frm. Section (0). (Tag, 'NoFormat')) = 0 then frm. 2 BackColor = MyFooterColor
On Error GoTo 0
For each ctl in frm. Controls
If ctl. ControlType = acTextBox or ctl. ControlType = acComboBox or ctl. ControlType = acCheckBox or ctl. ControlType = acOptionButton or ctl. ControlType = acOptionGroup Then
If Nz (InStr (ctl. (Tag, 'NoFormat')) = 0 Then
CTL. SpecialEffect = MySpecEffect
CTL. BorderStyle = MyBordStyle
If ctl. ControlType = acTextBox or ctl. ControlType = acComboBox Then
CTL. BackColor = MyTextBoxColor
CTL. BackStyle = MyBackStyle
End If
End If
End If
Next CTL
If right (frm. Legend 1) <> ') "then
FRM. Caption = frm. Legend & "(" & CurrentUser & "')" "
End If
Set frm = Nothing
End If
' MsgBox MyParentName & "." & MyFormName

End Function

Hello

Your Windows XP question is more complex than what is generally answered in the Microsoft Answers forums. It is better suited for the IT Pro TechNet public. Please ask your question in the Forums Pro Windows XP IT.

By connecting to Vista, get error mdata.dat file not found

When you connect to windows vista I get the file error 'MONTANA. DAT"not wetting. I can not tell whence error or how to fix it.

Hi Jameswithey,

1 did you recent hardware or changes to the software of the system?

This error message usually refers to the mouse. If you have recently installed a new mouse on your computer, you may need to remove the software that came with your mouse and see if the problem persists.

Step 1:

Uninstall the mouse in programs and features

a. click on start

b. type appwiz.cpl in the start search

c. search for all mouse software packages, right click and uninstall.

Once it is removed, reconnect your mouse, restart your computer, and update the drivers.

You can also consult the website of the manufacturer of mouse and try to update the latest version of the drivers.

Updated a hardware driver that is not working properly

Step 2:

If the step above does not work, you can try to perform a clean boot and check.

A clean boot to check if startup item or services to third-party application is causing this issue.

You can read the following article to put the computer in a clean boot:

How to troubleshoot a problem by performing a clean boot in Windows Vista or in Windows 7

After the troubleshooting steps, please refer to clean the boot link to put the computer to normal startup mode.

Hope this information is useful.

View object impl - AM not found null pointer exception
Hello

I wanted to filter my view criteria for a particular line. I used the following code in the module of the application. But why I can't see the items?

private line getUserInfo (String emailId) {}
Line UserInfo = null;
If (emailId! = null & &! emailId.equals("")) {}
ViewObject userAuthentionEVO = this.getViewObj1 (); Returns null
userAuthentionEVO.setNamedWhereClauseParam ("The_EmailId", emailId);
userAuthentionEVO.executeQuery ();
userInfo = userAuthentionEVO.first ();
}
return userInfo;
}
Exception in thread "main" java.lang.NullPointerException
at oracle.insurance.viking.foundation.model.am.AuthenticationAMImpl.getUserInfo(AuthenticationAMImpl.java:165)
at oracle.insurance.viking.foundation.model.am.AuthenticationAMImpl.validateUserCredential(AuthenticationAMImpl.java:64)
at oracle.insurance.viking.foundation.model.am.AuthenticationAMImpl.main(AuthenticationAMImpl.java:35)
@KR? Where this comes in the picture?

@Rakesh
start the request module Tester (BC4J tester) in debug mode (of the sort that you can set breakpoints), when the dialog box opens double click the node root (the module of the application). This opens a pane lists all the available public methods (which are part of the client interface). Select your method of a choice method select and press "run". This runs your method. If you have set a breakpoint in the execution of the method should stop there.

Timo

Transition from Active Directory objects always results in objects 'not found '.

Hello
I have a use case where I need to pass objects generated by the AD Plugin. What I mean by the way is "pass" of an element to the element in a workflow. For example, I have an action that gets the user of an ad object and rewritten it in a workflow attribute. The next action in the workflow will be this attribute and process it further.
Another use case would be that I have a workflow and several assets directories configured within the AD Plugin and so I want the user to specify what AD to use. So the AD:ActiveDirectory is an input parameter which is treated in the workflow.
In both cases I am running into the same error: the AD:Object initially is not found, created and defined. I can check this using a few outputs System.log(""), printing AD-object data in the console. However, at the time when a next action will reference the AD:Object input parameter / attribute the workflow raises a null pointer exception, saying that the AD:Object is not found. When we look at worklfow series in display variables that I see the AD:Object reference is missing, not showing "found - missing element."
What I'm doing wrong here?

Have you tried the technical preview of the 1.0.5 version of the Active Directory plugin? Looks like there's a fix for this problem: version Technical preview of VMware vCenter Orchestrator plug-in for Microsoft Active Directory

My macpro is backup in the capsule of time even when I was at work, which means that the time capsule is consumed my data plan. Can anyone suggest a way I can have it the backup only when my mac pro and time capsule is in the same local wifi

my mac pro is backup in the capsule of time even when I was at work, which means that the time capsule is consumed my data plan. Can anyone suggest a way I can have it the backup only when my mac pro and time capsule is in the same local wifi

If the Time Capsule and MacBook Pros are not on the same network, the MacBook is not backup in the time Capsule. You probably see what snapshots leaving MacBook on the local disk, until the two are reconnected. If you don't want that to happen, disable Time Machine on a different network.

Good day.

Please help me: not found data center

I use c# samples fixed with the sdk, when I try to run vmcreate example it get the data center not found error, although I write the name of data right Center,
Please help me, thanks in advance
I use visual studio 2008 and I have followed the installation guide documentation
This the output
C:\Users\Asmaa > C:\SDK\samples\DotNet\cs\VMCreate\bin\Debug\VMCreate.exe--url ht
TPS://IPAddress/SDK--username username - password password - datacentername
The ESX - vmname firsttry servers
[15/06/2011 13:39:27] Start the journal.
Has begun
There are one or more problems with the server certificate:
* A chain processed correctly, but terminated by a certificate certification root
e that is not approved by the trust provider.
* The certificate CN name does not match the passed value.
Datacenter-ESX servers found.
Press ENTER to exit:

Hello

The cmd line arguments shared by you, it seems that the value of datacentername - is ESX servers.

I want to share that if you connect directly to an ESX host, the data center would be "ha-dataceneter." Please check the name of datacenter using the managed object browser, https://ipaddress/mob.

Angela.

DGMGRL object NOT FOUND-HELP

Hello Experts-

I have a scenario where I would turn off transport Journal of primary school on physical media by & turn it back as part of PLANNED maintenance.

I am facing the following error and I was wondering if you guys can help out me:

DGMGRL> connect /
Connected.
DGMGRL> show database verbose DBNAME
Object "DBNAME" was not found
DGMGRL> show configuration verbose;


Configuration - DBNAME


  Protection Mode: MaxPerformance
  Databases:
    DBNAME  - Primary database
    DBNAME1 - Physical standby database


  Properties:
    FastStartFailoverThreshold      = '30'
    OperationTimeout                = '30'
    FastStartFailoverLagLimit       = '30'
    CommunicationTimeout            = '180'
    FastStartFailoverAutoReinstate  = 'TRUE'
    FastStartFailoverPmyShutdown    = 'TRUE'
    BystandersFollowRoleChange      = 'ALL'


Fast-Start Failover: DISABLED


Configuration Status:
SUCCESS

I'm confused as why the object is not found when you use the database show but configuration command can display it as a present?

Hello;

Try like this:

SEE THE DATABASE 'DATABASE_NAME' VERBOSE;

Best regards

mseberg

Time Capsule: "...". total object 'Data' is not found.

Similar Questions

Maybe you are looking for