Time capsule with modem/router

Similar Questions

• The Time Capsule and Comcast router compatibility

  I plan on buying Time Capsule.

  My ISP is Comcast and borrow the gateway (modem and router together)

  Comcast has not recommended the use of Time Capsule as wifi router

  I would like to know if there are problems (slow wifi, etc.) using Time Capsule with Comcast.

  It is very well - at least, it will work without problems.

  You will probably find yourself with two wireless networks - the Comcast box and time Capsule (from memory, you can not deactivate their wireless gateway), but since you get to choose which network to join you shouldn't have a problem.

• Need help to set up Time Capsule with surfboard SBG6580... wifi or extender?

  I just got my Time Capsule and trying to figure out if I should use as my wifi router, or keep my SBG6580 active and e TC allows to extend my warranty.

  Any recommendations?

  In addition, how? Online instructions do not seem to be very clear.

  Thank you!

  I will always recommend to use your Time Capsule as a router, it will be much easier to access and manipulate, unless really, you need to report more coverage.

• Can I use Time Capsule as a router to connect wirelessly with a pc

  I can all my products easily connect to the internet using Airport Time Capsule? I know I can save wireless my Apple products, but can I also backup my computers portable windows on the Time Capsule via a cable?

  Yes, but windows esp... 10 windows can be uncooperative.

  Also I do not know at all the recovery will be easy depending on what backup software you plan on using.

  Don't forget the world of Windows that the TC still looks like NT Server with FAT32 drives and all the inherent problem that there are.

• Time Capsule and modem stop working after two hours

  Hello

  -A received the solid green light on Time Capsule.

  -All of the lights work on my modem Netgear CM500.

  -Ethernet cable firmly in place.

  -Power up, the two units of work perfectly and operate normally.

  -After about 2 hours, the internet connection is lost.  All lights are still entirely green on both units.

  -Disconnect the two units, wait 5 minutes, and then turning on again.  The use of the Internet is restored.

  -After about 2 hours, the internet connection is lost again.

  Cox on said guy here, everything went well at their end.  I think that something is wrong with my configuration of the airport because I put up on an iMac obsolete.  If this is the case, I would like to start everything from scratch, unless I don't have to (?)  My new iMac is here.

  Thanks in advance,

  -Chris

  It is a problem with the TC model AC. We do not know the cause, but he just has problems with a number of different cable modems. (others are also affected, but cable seems the problem of principle).

  What is happening is the WAN constantly talk to the modem port.

  There is nothing you can do... neither is defective... they are simply not happy punks when together.

  The solution is to replace one or the other...

  Around here people seem to think to replace the modem a better idea... the zoom model seems to be working... but check with Cox is in their list of supported modems.

  Zoom modem.

  https://discussions.Apple.com/thread/7360161

  https://discussions.Apple.com/thread/7427491

  IMHO, it is best to replace the router function of the TC... Thus, a good router market as (v2) TP-Link WR1043ND<$50 on="" amazon)="" and="" flash="" to="" gargoyle="" firmware.="" this="" includes="" loads="" of="" great="" functionality.="" the="" tc="" then="" bridged="" to="" this="" unit="" for="" wireless="" and="">

  Or the other method will help you to a better place.

• Unable to connect to the internet via the Time Capsule 2 TB router

  Hello

  I can't connect wireless to the internet using my Time Capsule (see 7.7.3 running).

  I mainly use a macbook air (so no ethernet jack) running El Capitan 10.12.2 but the problem also occurs with our iPad and iPhone.

  The system has worked for a few hours after the initial Setup, but our ISP crashed and I was not able to make it work since their entry online. I've used a Linksys router.

  ISP is done via a wireless connection. The provider can see my antenna and an Apple device connected to it. I have a static IP address with DNS assigned.

  My airport utility shows green for the network connection and the internet but no Web page will open.

  I did reset hard and reconfigurations a few times which one where I left the modem to the router cable disconnected until I got the full configuration.

  The wireless network is using DHCP with DNS assigned to a beach.

  Router mode is DHCP and NAT.

  Any ideas would be appreciated.

  There are a number of situations where the TC will simply not work.

  I have a static IP address with DNS assigned.

  If you have configured the Internet of TC tab with static IP address?

  Would it not be possible to get the address IP via dhcp... have you tried?

  Wireless modem is connected by ethernet to your TC? Also, the modem is a router that is bridged?

  I really need to see the numbers... but it's not good to put the public IP address here... xxx on the first two bytes and just give me the rest... as long as the IP and gateway are the same.

  Or send it to my email address. (see my profile).

  Your linksys might work, but the CT will not... This happens because Apple does not provide sufficient flexibility to allow the wireless Internet service provider. (Or Satellite or fiber or some ADSL).

  But it can also be a problem with the network... we have problems with the WAN port with some modems.

  Does the ethernet connectivity light come on, when you connect the modem to the WAN port on the TC?

• Use Time Capsule with common carrier online

  Hello

  I have a new House that has pre wired Ethernet, but I don't know where the switch is. I have a lot of smart devices in my house, including the bulbs of Hue, Thermostats Ecobee, door to Garage Chamberlain, etc. as well as the different computers, tablets, etc.

  I had trouble getting good signal wireless in all the corners of the House. I use a current gen router Apple time capsule 3 to AC (ME182LL/A) and a modem docsis 3.0 NETGEAR (CM500-100NAS). I have a Mac boy, so I have an iMac, Mac mini and MacBook, but also have a Windows work laptop.

  To expand the network I use Apple Airport expresses (MC414LL/A). I have 4 of them. They are working very well that WAP at the bridge and extend the Time Capsule network. However, as to be expected with a comprehensive wireless network, they abandon signal intermittently and may be slow.

  What I would like to make a way to use airports as an extension of a wired network. I tried to use the netgear 500 (XAVB5421) power adapter to provide Ethernet over power line to the airports, but when I plug the time capsule in the supply of source line, it ends by disabling the internet entire feed of time capsule, I can't understand (maybe double NAT, blocking ports may idk). So my other option that I would use the pre wired Ethernet, but I'm not familiar with the use and installation.

  Could someone help with?

  Thank you

  I have a new House that has pre wired Ethernet, but I don't know where the switch is.

  Ethernet is the right way to do it... in a new home ring people who have done the wiring and ask where is the login Panel.

  It could be a simple patch on the wall or in the garage or under the stairs... There may not be a switch at all... After all it must be powered and I doubt that there would be no access.

  Do not use adapters EOP when ethernet is available... He is immensely higher... but the Express may not be the best units to extend with... You may have to them in hard mode...

  What I would like to make a way to use airports as an extension of a wired network. I tried to use the netgear 500 (XAVB5421) power adapter to provide Ethernet over power line to the airports, but when I plug the time capsule in the supply of source line, it ends by disabling the internet entire feed of time capsule, I can't understand (maybe double NAT, blocking ports may idk).

  Please post how you express installation from airport utility... Give us some screenshots and we can tell you.

  It is likely that you express to extend wireless installation... the minute you plug by ethernet (EOP is still just slower ethernet)... cause you a network loop that will crash your network... The express should be in Bridge mode and together to create a wireless network.

• Time Capsule as a router

  Instead of the cable company router, can I use my time capsule to be a router?

  The time Capsule can function as a router, but not a modem. If what you provided your cable provider is a simple modem, then the time Capsule will work. However, if they actually you provided a combination modem and the router, also known as a gateway device, then it wouldn t.

• Remote Access Time capsule with windows 10 pc

  I have my time Capsule connected to the router of the provider internet I easily access from inside my home network and with a Mac, I'm not able to access remotely with my Windows 10 PC and my iPad Time Capsule (I only am not able to Set up hold File Manager app). My internet provider to put in place a connection port on the router and I tried several TCP 20/21/80/8080/548 ports without success.

  Any suggestion wich port to set?

  Thank you

  Aldo

  You will need a computer that uses AFP (Apple Filing Protocol) to access from a remote location Time Capsule.  Windows 10 does not have this feature, so you will not be able to use the time Capsule to access from a remote location using a PC.

  Although it is not officially supported by Apple, you can usually access the time from an iPad Capsule using the navigation application.  The navigation instructions are there, and they do not work for me when I try this:

  Connection to your TimeCapsule from the Internet

  http://www.Stratospherix.com/support/gsw_timecapsule.php

  If you would like more information using navigation, please contact support FileBrowser.

  Stratospherix - FileBrowser - Support

• New connection airport Time Capsule with others

  Quick question I have a new airport Time Capsule. I'm trying to connect my 2 extremes of 2 airport with the new unit. They are in 2 different places in the House, I see them in my utility, but they're more connected... Lost... Help?

  Are you using ethernet to connect or wireless extend?

  When you installed the TC you replace an existing router that used EI or did you do a clean install?

  If you want to extend wireless simply reset the two AE at the factory and start on with installation... they should auto select this option to expand the TC in wireless... but you must start with them the two reset otherwise it will mess up the network.

• need help to set up Time Capsule with hub of sky

  Hi, I bought time Capsule and followed the instructions re. Connection cable internet hub in wide band directly on port WAN on TC. And yet nothing is happening outside orange flashing and message of airport utility saying it could not connect to the internet. I bought an Ethernet cable, just in case and tried to connect it to LAN to LAN, and I was able to create a 'network' but always seeing flashed. Can anyone help? Thank you!!

  El Capo can be really rotten networking.

  The skyhub is a router... I think it's okay... If you connect a computer directly into it, you should have internet?

  The TC may work very well in this configuration.

  Ethernet connector of skyhub LAN WAN TC as you did originally... correctly.

  So I highly recommend ethernet to the computer... because it helps no end. And even to pass the airport utility to use ethernet instead of wireless.

  Here (if obvious really that you would have ethernet under other Wi - Fi... don't know why I found totally by chance?)

  

  The configuration... make the TC must go to bridge mode...

  It is Off (bridge mode) on the network tab.

  And you need to create a wireless network with a different name to the skyhub.

  You can probably do it manually now without too many problems.

  And even without ethernet connection... Although reliable then ethernet is streets ahead wireless.

  Click on the TC icon in airport utility.

  

  Click on change... at the bottom right on the summary.

  Now you can fix it up. Click on the network and make sure that it says Off (bridge mode) I posted my configuration, but you do not follow that... I just allows you to see where everything is.

  

  Click on wireless and fix that up.

  

  You can even click on the base station and correct the name and the master password... so that all the names are short, without spaces and alphanumeric pure.

  NOT RECOMMENDED APPLE NAMES that are FALSE.

  If you have an ipad/iphone the iOS version of the utility is often better to get this right than the Mac version... particularly in the later version of the Mac OS.

• Hanging Time Capsule with cable will use less data?

  I have an airport Time Capsule 2 TB I use as a wireless router with my internet go beyond satellite service. I blow through my allocation of wireless data and I was wondering if it hang on my Time capsule to my Mac using a dsl cable would use less data?

  First the cable would be ethernet.

  Second, I assume that you are concerned about your Time Machine backup... but they are local network and that you do not use your allowance of the internet... so plug the TC by ethernet will not change the use of the internet... It is only if you have something that is initially high downloads... This can happen sometimes... but apple built in no mechanism to track usage... Indeed, they have removed completely since the last TC SNMP functionality and AE... in the view of many here... an indication that Apple believes that everyone has speed unlimited and unlimited broadband internet bandwidth and did not much care if you don't.

• How to use Time Capsule with Time Machine and no Wifi

  Situation.  Late 2009 iMac with OSX 10.7.5.  Used Airport Extreme since purchase in early 2010.  Use a modem cable from Arris SB 6141.  Decided to upgrade to 2 TB Time Capsule.  And the problems started.  I put TC in place... Finally, with the help of the people of this forum (thanks).  Transport CANADA does not have the internet connection to the Modem.  New to this forum I discovered that the TC does not like the SB6141.  So I put the Airport Extreme in the network and work like a charm wireless.

  Now, how can I connect the TC to the network or the Mac to use the part Time Machine?

  I tried to put the TC in Airport Extreme with an ethernet cable.  First, the iMac would not recognize the local network by removing printers and the other external USB drive; and my TV got confused on what wifi network with the same name in which to connect.

  Before I hit the reset button on the time Capsule I tried to ask what would be the right steps.

  Thanks to the folks on this forum. Thanks for your help.  Hope you all a good holiday this year.

  You should not have really big questions on Lion.

  Connect the WAN of TC port on the ethernet port LAN AE.

  Configure the TC in bridge. I disable the wireless to EI and let it run in the TC... that's much better work in this configuration.

  The Mac that will backup must really be connected to the TC in direct wireless or ethernet... This will help loads.

  The wireless work better on the TC... If it isn't, then you can swap EI... but I'd be surprised if that was the case.

• Load new Time Capsule with backup t. m.?

  I have an end 2013 27 "iMac running OS X El Capitan, version 10.11.6, with a new 3 TB Time Capsule. In the process of upgrading my original model A1470, 2 TB Time Machine awkwardly, I managed to detach the tablecloth of the end circuit rather than simply ripped hard drive making rubber on the 2 TB hard drive itself. This time Capsule is actually useless now. I installed the original drive work with my TM backups in a USB 3 enclosure with the intention of transferring its contents to my new Time Capsule. When the original Monte drive, it shows as 3 (?) partitions, labeled: APconfig; APswap; and the data. 'Data' has 84,46 GB of data in files "Backups.backupdb" and "ShareRoot. The other partitions are essentially empty-APconfig with a single file "AFP.reconect_keys" to 24 bytes and a total content of 15.6 MB and APswap without files containing 15.3 mb.

  How to use this original TC hard disk to load my backups Time Machine on my NEW 3 to Time Capsule? I only discovered how to load a T.C. from file to archive hard disk, but not the original files of TC.

  Any ideas will be appreciated.

  What you are, indeed, now doing is to copy/move an existing Time Machine backup 'network', a local disk to another drive (aka, your new Time Capsule) network.

  Basically, Time Machine uses a different backup format with readers local vs. network drives. You now have a backup of "network format" on a local disk. Time Machine will not be able to use this backup 'local', as it is, because it is not in a format that is "local." Sorry if that sounds confusing. It was confusing for me just to write it.

  A method that would work would be to clone the backup, but it only works when the two backups will be 'local format' ones.

  Worst case, I recommend that you come to start a new backup and use the one as archive.

• Question conectivity Time Capsule with Windows 7

  Hello

  I am owner of a time Capsule A1309 with 3 TB of memory and it stopped working with my Windows PC for a while. It used to connect normally not long ago, but now the drive doesn't appear and I can't access the time with AirPort Utility Capsule unless I type the IP address. I have a lot of archives stored in the drive and cannot access it from any PC running Windows in my house.

  My Control Panel is:

  • RAM - 8 GB
  • Intel Core i5 - 2430 M 2.40 GHz
  • 64 bit
  • Windows 7 Professional

  I know that the Time Capsule works normally, because I can access it from an old iMac I have here.

  Other details: My Time Capsule is on System 7.6.7 version and I also have the last airport utility installed on my PC.

  Thanks in advance,

  Rodrigo Trindade

  For starters, you have access to the Time Capsule (TC) using the AirPort for Windows PC? The question started the TC to 7.6.7 firmware version after update?