need help to set up Time Capsule with hub of sky

Similar Questions

• Need help to set up Time Capsule with surfboard SBG6580... wifi or extender?

  I just got my Time Capsule and trying to figure out if I should use as my wifi router, or keep my SBG6580 active and e TC allows to extend my warranty.

  Any recommendations?

  In addition, how? Online instructions do not seem to be very clear.

  Thank you!

  I will always recommend to use your Time Capsule as a router, it will be much easier to access and manipulate, unless really, you need to report more coverage.

• Need help to set up Time Capsule to extend the current U - pay Wi - Fi.

  I am trying to extend my current Wi - Fi signal from AT + T U-Verse. I have a time capsule 1 TB and a Macbook Pro w/Retina Display. When I go in the most convenient airport Configuration it allows me to select "Extend a current network" but who is she won't let me go. The only option that it allows me to move forward with is to create a new network. I do not have the ability to plug directly into the router as I rent and do not have access to the actual router, just the Signal Wi - Fi. Please help with suggestions. I tried a factory with the time Capsule hard reset and still nothing. Thank you.

  Sorry, but the time Capsule and other Apple routers will expand only wireless network that is provided by another router from Apple.

  Another way of saying the same thing, it's that if you want to extend wireless network using an Apple product, you will need two of them... a close Uverse router/modem connected using Ethernet and set up to "create a wireless network"... and another airport located remotely to "extend a wireless network.

  Since you say that you can not access the Uverse router, that will make things very difficult.

  The only thing that peut work would be to add an AirPort Express and configure it to 'join' the Uverse wireless network. When she did this, it can then provide an Ethernet signal to the time Capsule, which in turn can be configured to provide your own private network.  In other words, the AirPort Express would act as a wire-to - Ethernet without 'bridge' to ensure the Ethernet connection that requires time Capsule.

  If you decide to try this, it would be a good idea to understand the return policy of the store on the AirPort Express before you buy. With unusual game like this, the only way you will know if it will work in your home is to try in your home.

• need help to set up time capsule as a backup only

  I used Time Capsule as a router wifi and backup for several years.  The wifi didn't give me the whole House coverage so I bought the mesh network eero newly released product. I still want to use my Time Capsule for backup and, as he already has about two years of backup on this subject, I don't want to lose these backups. I created a new network for eero routers but gave the network of the same name and password as the old TC network so that all my devices would automatically connect to the new network.  That has worked well.  Is it possible to connect the time Capsule to the my wireless network so that my MacBook and MBP my wife will continue to save on the network they were?  The eero router has two Ethernet ports on the back and the two are to be used (one for the modem, the other for Sonos) so I do not have an available port to use.  Can I buy a switch if I have to, but if there is a wireless solution I would rather.

  I also have a desktop Mac that has saved on the TC and it's my main computer.

  Thanks a lot for your help.

  Is it possible to connect the time Capsule to the my wireless network so that my MacBook and MBP my wife will continue to save on the network they were?

  No, you cannot join the TC now network a wireless router not apple. Apple has removed this feature because he was too... too slow, unreliable and missing too many apples.

  The eero router has two Ethernet ports on the back and the two are to be used (one for the modem, the other for Sonos) so I do not have an available port to use.  Can I buy a switch if I have to, but if there is a wireless solution I would rather.

  You can run the TC between eero router and the sonos.

  Connect the wan port on TC eero and Sonos to the TC lan port. Configure the TC in Bridge mode. Disable the wireless sound. (Or you can leave the wireless on but use a different name for your eero wireless now).

  The TC will work like a switch... this side of it will work fine.

  How well the works of TC depends on the OS everything works... You can find it is actually necessary to paginate on the TC to make backups of the laptops wireless. Apple has made changes to the DNS system that broke network so that it can be impossible for computers discover the TC after a few hours after a reboot.

  Give it a try... If this does not work then you need to be more creative.

  The TC can connect through ethernet in the desktop computer. But for this, it must be configured with a different range of IP addresses for the rest of the network. Again, you can use wireless on... but the laptop will have to make backups by a different method. It gets complicated very quickly.

  Tell me what IP range using the eero router?

  I can make a few suggestions more as soon as we clear.

• need help to set up Linksys printserver with verizon wifi hotspot

  need help to set up Linksys printserver with verizon wifi hotspot

  pfsjmhall,

  Configure your wireless router to use these recommended wireless router settings, I use channel 11. I would use a new SSID to connect easier.

  Then configure the Linksys print server. Find your network to give your passkey (password)

  Then set up the printer, choose network and follow the instructions.

  Rick

• With the help of Apple's Time Capsule with Lightroom

  Hi, I just bought Time Capsule thinking that all my photos may be wireless sync or searchable using Lightroom. However, when I tried to open the catalog in Lightroom on Time Capsule, it is said that he can not use network drive! WHAT A BUMMER!  I always hope that there should be another way so that I could use my Time Capsule in Lightroom and do my usual regular fabrics, manage my photos and editing wireless (if it's going to be slow, is very WELL!)

  Please advice if someone has an idea to solve this problem...

  Thank you!!

  You can have all your photos on the Time Capsule disk, but the catalog must be on another internal drive or external.

• Setting up Time Capsule 3 to

  Advice please, I'm a little confused as to how set up my Airport Time Capsule to do what I want it to do.

  I currently have:

  -A "Superhub" recently installed offering fast home Internet access via a cable fibre optic supplier.

  -J' bought a Time Capsule from Apple before hand and want to put it up to do the following:

  -Connect two external hard disks accessible storage from my Mac Mini and MacBook (USB connection).

  -To connect a USB printer accessible to these two computers, (more than the iPad and an IPhone).

  (Meanings attached to the ATC via a USB hub)

  -Use 3 TB storage in ATC as a backup Time Machine of Mac Mini and MacBook.

  I understand that ATC must be connected on the beautiful via Ethernet to the WAN socket cable to a plug on the hub.

  I'd be grateful if someone could please explain/point me to an explanation that describes how to set up my Mac Mini ATC in order to achieve the above requirement clearly and in simple terms.

  Thank you very much

  Before you begin, you must understand that to connect a printer to the USB port on the Time Capsule, as the iPhone and iPad iOS devices will NOT be able to print to the printer?

  That being said, a third party application like Printopia pourrait be able afford this, but there are no guarantees, and our ability to help on such things is limited, at best.

  The reason is that iOS devices required an AirPrint -compatible printer that connects to a wireless network. In other words, Apple takes the 'Air' in AirPrint very seriously.  Please take a look at this support document Apple for more information on AirPrint compatible printers.

  On AirPrint - Apple Support

  Order of the day. Depending on the brand and model of your printer, your Mac may or may not be able to print on a printer connected to the USB port on the Time Capsule.  Unfortunately, Apple does not provide a list of compatible devices in this regard.

  So, while we provide some tips on 'how to' attempt to put in place, we cannot tell you if it will work or not. Not sure how well... or if it will work until you try it on your own network.

  We will try to help, but normally, you could get information on how to set up your printer by people of support for your printer, not to Apple.

  Regarding the connection of two hard disks and a printer to the USB port of Time Capsule, this will require the use of a powered USB hub which manages devices USB 4 or more.  The problem... some powered USB hubs will not accept a USB to operate simultaneously, so you wouldn't be able to print, for example, while you have been back up data on a hard drive connected to the powered hub.

  So, you will need to check with people of powered support for your hub to ensure he will allow the simultaneous for USB devices use.

  If you want to move forward, we can help get the set up time Capsule and work with your Superhub, but our ability to help printers and hard drives may be limited.

• I just reinstalled windows xp sevice pack 3 in my laptop. l need help to set up the wireless modem. My laptop is IBM ThinkPad.

  I just reinstalled windows xp sevice pack 3 in my laptop. l need help to set up the wireless modem. My laptop is IBM ThinkPad and the modem is a construction in one. would appriciate ay help

  Hi bardhiboris,

  You can follow the steps from the link below: set up a wireless network:http://www.microsoft.com/windowsxp/using/networking/setup/wireless.mspx

  Other links, please refer to: 10 tips to help improve your wireless network:http://www.microsoft.com/athome/setup/wirelesstips.aspx

  To set up automatic wireless network configuration:http://www.microsoft.com/resources/documentation/windows/xp/all/proddocs/en-us/wlan_client_configure.mspx?mfr=true

  With regard to:

  Samhrutha G S - Microsoft technical support.

  Visit our Microsoft answers feedback Forum and let us know what you think.

• setting up time capsule and express wired after disconnection of the airport

  I have a 2 TB Time Capsule and three 3 wired express airport throughout my house.  I know that when I added first the cable express, that I had to call apple to change some settings.  Now I can't service because they are more than a year and after a recent quick breakdown (two or three) power is the airport expresses link is more and a bunch of my settings seem to have changed on the Time Capsule.  Any help would be greatly appreciated.  Thank you

  If you think there are setting changes, then it would be better to start over.

  • First of all, you want to make a 'factory' reset on all of your base stations. This will return them to their "out-of-the-box" configuration Once finished, leave them turned off.
  • Then, we put up the Time Capsule (TC). Since it has been reset, it will broadcast a Wi - Fi unsecured network with a network name of something like: Apple network NNNNNN.
  • Use AirPort Utility on your iPhone, Mac or PC to configure the TC as a stand-alone wireless router. In other words, configure it to provide a secure WiFi network.
  • Once the TC has been configured, verify that the clients on your network can access the Internet with it.
  • If he succeeds, proceed to the next step. If this is not the case, stop and post back with your results.
  • We will now configure all of your base stations for a roaming network.
  • Power-up one of the three stations based AirPort Express.
  • Once again, you will need to use AirPort Utility to continue. The utility must now find the Express, and if all goes well, it will offer to the Express allows to extend the TC using Ethernet. It's what you want and just go through the steps automated window 'Installation '. And then on actually.
  • Do the same for the other two express base stations.

• Time capsule with backup HD on a MBP with SSD?

  Hello world

  I recently bought a Time Capsule from Apple and saved my full 500 GB hard drive which is on my Macbook Pro 13 "(modèle fin 2011)." I was wondering what I need and what will happen if I buy a Macbook Pro the retina which will have an SSD (probably more small size), but also a different logic board?

  -Is the capsule will be recognized by the new Macbook Pro retina and I will be able to continue to save on it, to add?

  -I will be able to access the files that I backed up the MBP Late 2011 by accessing the retina MBP with time Capsule?

  There's something else I should be aware of the based on the experience of each?

  Thanks a lot for your help and your advice!

  On the first startup of the new machine, the installation wizard will ask you if you want to move your user name for the new Machine. Highly recommended for a transition seamles.

  From then after that after a reboot or two and the first time that you start the TM/TC upward it will ask you if you want to "inherit" the TM. Yes

  

• Replacement of an old time capsule with a new

  I saw a few posts on this subject but they don't help me, but then again I'm not an expert! What I wanted to do, is to set up my new 2 TB Time Capsule (the high) using all the old settings. I'm not talking to duplicate the time capsule data; I'm happy to go back on it. Many people advise new network from scratch, but we have hordes of families who visit most other devices on the network enabled (like nests) who have been extremely painful to put in place and I can't face that again! I searched the internet and came across a great video on YouTube that made simple: https://www.youtube.com/watch?v=-VO2tztvb58

  It called an option within the airport most convenient to transfer the parameters of one former airport to another. But no matter how many times I try, I get an error message

  Apple solution seems to be so simple. I do something wrong, maybe in the login sequence, at some point, the airport ask "which network is the existing time Capsule on?" but provides no pull-down or options to nominate for. Then I went to the network Wifi high to the right of my Mac and selected icon that interests you and that moved on the next screen.

  Can anyone offer advice or should I give up and start from scratch?

  Thanks in advance

  Connect your computer to the TC using ethernet... you change wireless wireless and guess what... you're sawing off the branch on which you sit.

  If your computer does not have ethernet or you have no computer in the House that still has the port most important in the world... so that you never get yourself backed into a corner wireless even once, then buy a bolt of lightning for the ethernet card.

  Alternative method.

  This is not 100% kosher, but should work.

  On the old TC export the configuration.

  

  My screen is a bit old, but it should always be there.

  You must be within the facility of the TC to do... then click the old TC icon and then edit... then export...

  On the use of new TC import a Configuration file.

  It works for most. FOR THE MOST PART.

  As a BTW... your name is terrible.

  All new Mac OS since Mavericks use the default SMB protocol.

  SMB has much stricter rules that AFP ever made... This is not your fault... This is apple not to repair their airport for the automatic naming utility is not the long names with spaces and characters not compliant... the apostrophe is illegal... you will notice that if you install the disk in the finder, that apostrophe, and spaces are removed from the name... but over the long names will interrupt the.

• Remote Access Time capsule with windows 10 pc

  I have my time Capsule connected to the router of the provider internet I easily access from inside my home network and with a Mac, I'm not able to access remotely with my Windows 10 PC and my iPad Time Capsule (I only am not able to Set up hold File Manager app). My internet provider to put in place a connection port on the router and I tried several TCP 20/21/80/8080/548 ports without success.

  Any suggestion wich port to set?

  Thank you

  Aldo

  You will need a computer that uses AFP (Apple Filing Protocol) to access from a remote location Time Capsule.  Windows 10 does not have this feature, so you will not be able to use the time Capsule to access from a remote location using a PC.

  Although it is not officially supported by Apple, you can usually access the time from an iPad Capsule using the navigation application.  The navigation instructions are there, and they do not work for me when I try this:

  Connection to your TimeCapsule from the Internet

  http://www.Stratospherix.com/support/gsw_timecapsule.php

  If you would like more information using navigation, please contact support FileBrowser.

  Stratospherix - FileBrowser - Support

• Need help to set up voice VLAN in SG300

  Hello

  I spent too much time on it now and need help. I'm trying to set up a voice switch VLAN on a SG300 - 28 p. I need to charge a phone Cisco 7965 connected to a port on SG300 - 28 p to use VLAN 100, and a workstation connected to the phone to use Cisco 7965 on VLAN 101 by SG300 - 28 p. In the common Cisco IOS switches, this task is configured as follows:

  interface gi25

  switchport mode access

  switchport access vlan 101

  switchport voice vlan 100

  Trying to achieve this scenario with a Cisco SG300 switch turns into a nightmare. You will have to deal with a Dynamic of VLAN voice Auto Voice VLAN mode. Then, you must have a configured trigger and activated Automatic Smartport . I tried to do this in CLI nothing helps. Cisco 7965 receives an IP address of the access VLAN on Gi15 interface, which is 101 VLAN. I need to receive an address IP of the VLAN 100.

  The current configuration under Gi15 interface is as follows:

  interface gigabitethernet15

  activate the storm control

  broadcast storm control level kbit/s 10

  Storm-control include multicast

  port security throw trap 60

  maximum port security by 10 points

  port security mode max-addresses

  spanning tree portfast

  LLDP-med disable

  switchport mode access

  switchport access vlan 101

  ! next order is internal

  macro auto smartport dynamic_type unknown $native_vlan 101 $voice_vlan 100

  Now, I don't know how the macro auto smartport dynamic_type unknown $native_vlan 101 $voice_vlan 100 command in the config, and I do not know how to remove it.

  When I try to enter the command macro auto smartport type ip_phone_desktop under Gi15 interface, I get the following error message:

  The $voice_vlan macro setting is not configurable by the user

  It seems that the auto attendant smartport macro ip_phone_desktop can not apply the setting $voice_vlan with a value of 100. In fact, I explicitly does not use this parameter to everything in the order of macro auto smartport type ip_phone_desktop ; However, the SG300 switch knows that the voice VLAN VLAN 100, and he's trying to use this VLAN ID as the value of the $voice_vlan parameter, the macro fails.
  

  I tried statically configure the voice VLAN on the switch SG300 using the command id of the vlan 100 voice , but I couldn't get the ip_phone_desktop macro to configure interface Gi15 correctly. Then, I removed the command id of the vlan 100 voice and obtained SG300 to learn his voice VLAN ID of UC560 connected to the SG300 through a trunk port based on the port configuration (connected to SG300) for the trunk of the next UC560:

  switchport trunk vlan 101 native

  switchport mode trunk

  switchport voice vlan 100

  Cisco-switch macro description

  This is the command switchport voice vlan 100 who announces to SG300 via CDP VLAN 100 is a voice VLAN. When I run the command show vlan local VoIP on the SG300, I get the following result:

  VLAN ID - VPT DSCP Source MAC address Interface

  1                    5          46       default           ----                    ---

  * 100 CDP e0:5f:b9:xx:yy:zz gi28

  Thus, it is clear that the SG300 receives information from UC560 via CDP in port Gi28 VLAN 100 is the voice VLAN. However, I can not always apply the ip_phone_desktop macro to SG300 Gi15 interface.

  Also, I tried to set up vState ofoithis vlan auto-déclenché as well as the commands in global configuration State vlan automatic voice activated mode. Or setting changes anything view voice VLAN announced at Cisco 7965 where Cisco 7965 continues to use VLAN101 (access the VLAN assigned to the interface Gi15).

  Hello telecastle,

  The Macro just get in the way most of the time. A default state on the switch a user will set the id of the vlan voice with orders

  (config) #voice vlan id 100

  * This will create the vlan 100

  VLAN, VoIP? * You can use to change your defaults for dscp and cos a long with all the other settings.

  State of vlan (config) enabled automatic #voice

  (config) #interface rank fa1-24

  (config-if-range) #switchport trunk vlan 101 native

  trunk (config-if-range) #switchport allowed vlan add 100

  * This function will define the vlan native on the trunk to 101 for the data port and vlan tagged will be 101 for the voice.

  CDP is enabled automatically and should learn the features of the phone and get on the phone to the vlan 101 on this port.

  CDP of the UC should automatically fill in the switch of the SG. You may need to upgrade the switch to the latest firmware however. Also make sure that the DHCP server for the voice if the CPU must be configured accordingly.

  Let me know if this helps.

  Cisco Small Business Support Center

  Randy Manthey

  CCNA, CCNA - security

• Need help to set a DELETE statement.

  I have a table that contains the records of files. Files come in a bouquet each week. So, we need to delete records from a table to the corresponding fields and load the table with up-to-date data.
  
  In doing so, the DELETE statement takes a long time. Need help with this setting.
  
  Here are the details.
  
  (1) total number of records in the table: 23 million records.
  (2) approximate records deleted each time: 500 K to 1.5 million.
  (3) table is partitioned on a PERIOD key. That is, each partition will have the data for a given period.
  (4) table is not indexed
  (5) removal occurs on a combination of 2 fields (PERIOD + BATCH).
  
  Here is the query and the plan:
  
  ===========================================================
  
  SQL > EXPLAIN PLAN SET STATEMENT_ID = 'TSH' FOR
  2 REMOVE / * + PARALLEL(DETAIL_UNKNOWN,10) * / u DETAIL_UNKNOWN
  3 WHERE u.FLBATCHID = 'PCAFRINTERMAR1105' AND u.N_PER6 = 201214
  4;
  
  He explained.
  
  SQL > SET LINESIZE 130
  SQL > SELECT * FROM TABLE (DBMS_XPLAN. DISPLAY ('PLAN_TABLE', 'TSH', 'ALL'));
  
  PLAN_TABLE_OUTPUT
  ----------------------------------------------------------------------------------------------------
  Hash value of plan: 2400300449
  
  ----------------------------------------------------------------------------------------------------
  | ID | Operation | Name | Lines | Bytes | Cost (% CPU). Time | Pstart. Pstop |
  ----------------------------------------------------------------------------------------------------
  | 0 | DELETE STATEMENT. 596K | 12 M | 838 (9) | 00:00:12 |
  | 1. REMOVE | DETAIL_UNKNOWN |
  | 2. SIMPLE HASH PARTITION | 596K | 12 M | 838 (9) | 00:00:12 | 6. 6.
  |* 3 | TABLE ACCESS FULL | DETAIL_UNKNOWN | 596K | 12 M | 838 (9) | 00:00:12 |
  ----------------------------------------------------------------------------------------------------
  
  
  PLAN_TABLE_OUTPUT
  ----------------------------------------------------------------------------------------------------
  Name of the query block / Alias object (identified by the operation identity card):
  -------------------------------------------------------------
  
  1 LED$ 1
  3 LED$ 1 / U@DEL$1
  
  Information of predicates (identified by the operation identity card):
  ---------------------------------------------------
  
  3 - filter("U".") FLBATCHID '= 'PCAFRINTERMAR1105' AND 'U'." N_PER6 "= 201214)
  
  
  PLAN_TABLE_OUTPUT
  ----------------------------------------------------------------------------------------------------
  Projection of the column information (identified by the operation identity card):
  -----------------------------------------------------------
  
  2 - (cmp = 2, 3) "U". ROWID [ROWID, 10], "U". "N_PER6" [NO.22], 'U' "." " FLBATCHID ' [VARCHAR2, 20].
  3 - « U ». ROWID [ROWID, 10], "U". "N_PER6" [NO.22], 'U' "." " FLBATCHID ' [VARCHAR2, 20].
  
  27 selected lines.
  
  ===========================================================
  
  Need your suggestions on how the query / table can be tuned.

  Hi Anand,

  I wanted to check why your tkprof Watch report two executions of the statement:

  call     count       cpu    elapsed       disk      query    current        rows
  ------- ------  -------- ---------- ---------- ---------- ----------  ----------
  Execute      2   2315.71    2480.17          0       3351     624489      611765
  

  In fact, it there was only a single execution of the DELETE statement. The trace file begins with a call EXEC of any statement without call analysis

  *** TRACE DUMP CONTINUED FROM FILE XXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXX_ora_241708.trc ***
  
  EXEC #1:c=20000,e=13996,p=0,cr=0,cu=0,mis=0,r=0,dep=0,og=0,tim=32472879711702
  =====================
  PARSING IN CURSOR #2 len=68 dep=0 uid=72 oct=42 lid=72 tim=32472883567994 hv=740818757 ad='0'
  ...
  

  TKProf aggregates this EXEC call with call EXEC of the DELETE statement because they have the same location of cursor (#1), he thinks it was the same cursor.

  PARSING IN CURSOR #1 len=93 dep=0 uid=72 oct=7 lid=72 tim=32472889974030 hv=1242910589 ad='e5979d80'
  DELETE from detail_unknown where n_per6 = 201214 and FLBATCHID = 'PCAFRINTERMAR1105'
  END OF STMT
  PARSE #1:c=0,e=11462,p=0,cr=0,cu=0,mis=1,r=0,dep=0,og=1,tim=32472889974024
  ...
  EXEC #1:c=2315710000,e=2480213492,p=0,cr=3691,cu=624489,mis=0,r=611765,dep=0,og=1,tim=32475370187626
  

  So, the question about two executions is closed - there was only a single run.

  The performance - 2315,71 seconds of time processor is absolutely huge for such amount of work. It looks like a bug.

  First, I propose to check the time without compression. If your environment allows this kind of testing try to decompress the partition and re - run on unpacking data DELETION.
  10.2 find the name of the partition

  select partition_name
    from dba_tab_partitions
   where table_name = 'DETAIL_UNKNOWN'
     and partition_position = 6
  

  After that

  alter table DETAIL_UNKNOWN modify partition  nocompress;
  alter table DETAIL_UNKNOWN move partition ;
  

  and run again the button DELETE.

  What is the operating system on the server?

• Cannot set up time capsule

  ccannot get rid of blinking yellow when you try to time capsule of installation with net gear 7550 with ATT dsl. I need instructions step by step.

  Yellow flashing can be about 100 different reasons... (exaggerating)

  Open airport utility... Click on the TC and post a screenshot showing the error message... We cannot do anything without knowing what error.

  It could be updated firmware available... and so there is absolutely nothing wrong with the configuration whatsoever.