Time Capsule and modem stop working after two hours

Similar Questions

• USB modem stop working after long time and I have to unplug then plug it in again, I want to solve this problem without unplugging and plug?

  USB modem stop working after long time and I have to unplug then plug it in again, I want to solve this problem without unplugging and plug?

  Hi ahmedman_10,

  ·         You follow the steps in the article of my previous answer?

  Follow these steps in my previous answer and at the same time this article, follow these methods.

  Method 1: Follow the steps in the article.

  USB port may stop working after you remove or insert a USB device

  Method 2: Update the latest drivers for chipset.

  How to manage devices in Windows XP

  For reference:

  Why my computer does not detect my new USB device when I run Windows XP or Windows Server 2003?

• Satellite Pro A210 - keyboard and touchpad stop working after hibernation

  I installed Windows 7 (32 bit) on my Satellite Pro A210 and have a similar problem. When it starts OK but after hibernation the keyboard and touchpad stop working after 3 minutes. The only way to fix it is a re-boot of the force.

  Anyone have any ideas?

  Hello

  You have installed all the drivers for your laptop? I mean especially the chipset driver.
  Check this box!

  If you have yellow exclamation points in Device Manager, you must install all the missing drivers.

  Last but not least don't forget to install all Windows 7 updates available that you can get thorugh Windows Update.

  Sorry, but that's all I can say at the moment

• Predator G3120 stops working after one hour (exactly)

  Acer Predator G3120

  Windows 7 (64-bit)

  State of origin

  Stops working after one hour (very reproducible)

  Hello peoples,

  For more than two years now, I have an Acer Predator G3120 and I experienced a lot of pleasure from it. Three months or so, however, I can't keep the pc for more than an hour later. If I have all the programs running at the time where he spent an hour limit, my pc crashes and gives me a BSOD (mainly stopcode 0x000000f4). If I don't have any programs running, it will be impossible to open all my desktop shortcuts, and if I try to go to 'My Computer', explorer.exe stops working. ALT + ctrl + del will result in a black screen. I'm quite a greenie when it comes to things like these, but I am I supposed to do something with my SSD.

  Download the latest drivers did not work, however. Also, I'm sure that this doesn't have to do with malware, as I couldn't detect any with different scanners, and I put my pc back to factory settings (which makes it quite certain, that he doesn't have to do with any installed programs).

  At this point, I'm running out of options, and so any help would be most welcome.

  Thank you for reading,

  Skumawiki

  Once connected to your system, your position SSD is not serious.

  Try this:

  http://www.crucial.com/wcsstore/CrucialSAS/firmware/M4/070H/1-0-0-90-crucial-070h-07-00-SSD-firmware...

• USB mouse and keyboard stop working after I have install Windows Update KB2913431

  After installation automatic Windows Update KB2913431 (Win 7 Enterprise), the computer seems to work very well, but my mouse and keyboard stop working.  The option of automatic repair after that start with F8 does not work.  He said that the error is "unspecified".

  The fool is that it has created a constellation of intermittent problems when I try other options to get these devices to function after the update.  The questions I will of unpowered USB ports, grateful Windows and install the drivers for USB devices, but then do not recognize their (and are not), random BSOD, restore points invalid system, random boot failure, which causes discs to randomly stop working properly, closed randomly , à... I think you get the idea.

  I think it must be a driver problem.  I passed through the Device Manager and uninstall all hidden devices.  I have updated the drivers for everything that has an update available.  I tried to disable all, but Microsoft services at startup and in the list of "services".  I've always been unsuccessful; However, when I can get it to successfully restore to a point before the update (none of the automatic restore points work correctly) it seems ok.  It will sometimes seem to work after I applied the update, but then go haywire shortly after.  I am convinced that it is not a hardware problem, given that the prior update restores (when they actually cross without failure) work very well.

  I went through countless articles in the knowledge base and tried all the suggestions I've seen, other than registry cleaners because I had a bad experience with this earlier.  I tried so many things that I lost count and the memory of some of them.

  I reached point is never install the update (an option that I prefer not to use) or creating a clean Windows install on another drive (an option that I prefer not to use, but I'm a little more friendly to).  I already started to back up files to prepare a clean install, but I reach out one last time before I pull the trigger.

  Thanks in advance for your suggestions you have!

  Edit: I thought I could include other system information.

  Motherboard: Gigabyte P67A-UMD
  -Drivers for integrated components:
  Related articles - USB:
  -Renesas Electronics 3.0 USB root hub
  -Renesas Electronics USB Host controller 3.0
  -Intel (R) 6 series/C200 Series chipsets USB Enhanced Host Controller - 1 26
  -Intel (R) 6 series/C200 Series chipsets USB Enhanced Host Controller - 1C2D
  USB root hub-
  -Generic USB Hub
  -Network:
  -Realtek PCIe GBE Family Controller
  Graphics card: NVidia GeForce 460 GTX (driver c. 332.21)
  Sound: NVidia High Definition Audio 4 x, Realtek High Definiton Audio x 1
  There may be a conflict here: the address of the Realtek driver is 00000201, which is the same address as * a Nvidia drivers.* *.
  Mouse: Logitech (MX518) G3 mouse optical - wired
  Keyboard: Keyboard wired simple Generic USB Dell
  All other USB devices are currently disconnected

  Thanks, but I tried to fix myself on a personal level - my IT Department is not hot.

  In any case, the problem was resolved after much googling - I took possession and renamed a bunch usb*.sys file in the Windows\System32\drivers folder, uninstalled items usb from Device Manager and did a scan for the hardware changes.
  This solves the problem.

• Time Capsule backup suddenly stopped working

  I used my Air Port Time Capsule since July last year, without a hitch. Then all of a sudden today, he says: 'no back ups for 155 days' (!) and I get this message:

  "The backup drive is not available. Make sure that the backup disk is connected, or select a different backup disk. »

  It is connected. I can see it in the AirPort Utility. I see it in the Finder. I access it via the finder. I am at a total loss!

  (1) what on Earth is my all backups since July 2015?

  (2) how to operate again?

  (3) a way to ensure this NEVER happens again?

  Help, please!

  It is connected. I can see it in the AirPort Utility. I see it in the Finder. I access it via the finder. I am at a total loss!

  It's a little unusual to see full access to the rest of the computer and the inability to access by Time Machine.

  (1) what on Earth is my all backups since July 2015?

  They never happened.

  During your updates... things are lost and error messages are never toward the front of the screen even if I suspect that the log is full of them.

  (2) how to operate again?

  Reset complete TC... and I recommend you wipe it and start the new backup. See the section below... my standard how to correct the answer to the problem.

  (3) a way to ensure this NEVER happens again?

  Only a stupid person would make a promise, that it will NEVER happen.

  Thinking more broadly... I say to the people in these columns now ad nauseum... Use an alternative solution. Carbon Copy clone or Chronosync are good examples.

  They can be used alongside TM... but tend to be more reliable.

  He is also much better working on a local disk instead of a network... Although with a MBPr having to plug a USB stick in the car all the time would be a brake.

  Try to CCC. It's free for a month... If you find that it works for you purchase the license.

  Start from a factory reset. No files are lost on the drive hard in doing so.

  Universal factory reset

  Turning off the TC... That is, remove the power supply cord or the power at the wall outlet, wait 10 seconds... Hold the reset button... be nice... Turn on always even now in reset... and keep holding in for another 10 seconds. You may need assistance because it is difficult to hold in reset and power on. It will show the success quickly flashing led front. Release reset... and wait a few minutes for the TC to reset and return with the factory settings. If the front LED flashes quickly you missed and simply try again. The reset is quite fragile in these... Press the key while it is just click away and not more... I've seen people bend lever or even break. I use a toothpick as a tool.

  NB. None of your files on the hard drive of the TC are removed... This simply clears the settings of the router of the TC.

  The installer the TC.

  And then redo the configuration of the computer with the Mavericks - Yosemite - ElCapo. (MYELCAP)

  1. the use of very short names... NO APPLE RECOMMENDED names. Without the space and pure alphanumeric characters.

  for example TCgen5 for the base station and the name of the TCwifi wireless.

  If the problem is using wireless TC24ghz and TC5ghz with fixed channels as it also seems to help stop the nonsense. But it can be tried in the second round. IE, plan on a first and second series of changes to fix this... If all goes well... I note other steps can you tour2.

  2. use all passwords also consistent with 1. but maybe a little longer. IE 8 and 20 characters of mixed cases and numbers... no alphanumeric non-caracteres.

  3. If the TC is router, you can ignore this point. It is only a problem when the TC is bridged.

  If ensure that the TC is always the same IP address... you will need to do this on the main router using a dhcp reservation... or a bit more complex setup by using the static IP address in the TC. But it's important for deriving from intellectual property in all directions when MYELCAP do not remember his name for 5 min after a reboot done for poor network management.

  4. check that your share on the computer name does not change... Make sure that it is also in line with the above... short without space and pure alphanumeric... but this change will mess up your TM backup... so be prepared to make a new, full backup. Sorry... keep this one for the second round, if you want to avoid a new backup.

  5 attach the TC disc into the computer manually. (In your case, it seems not to be a problem... and I need to solve this problem, as El Capo behaves different).

  In Finder, go, connect to the server in the main menu,

  Type in SMB://192.168.0.254 (or whatever ip of TC is that you made static. It's a default router 10.0.1.1 and I encourage people to stick with it unless you know what you're doing).

  You can use the name... SMB://TCgen5.local where you replace TCgen5 with your name of TC... local is the default domain of the TC and does not change.

  However the names are not so easy as... the IP address nor reliable. They are not at least not in Yosemite. The field can also be a problem if you are not clogged or wireless directly to the Treasury Board.

  6. ensure that IPv6 is set to link-local only in the computer. For example wireless open network, wireless and Advanced preferences / TCP/IP... and the difficulty of IPv6. link-local only. Do the same for the ethernet if you use it.

  This one is important. The auto setting uses apple straightens always not good values.

  

  For computers updated once or twice since the major point of revisions... I think that a clean installation becomes almost a necessity.

  It is a lot more jiggery pokery, you can try, but the above is a good start... If you still find not reliable... don't be surprised.

  You may need to do more work on the computer itself. for example, to reset the NVRAM/PRAM/SMC... helped some people. In the end... A clean installation of the operating system is also useful if you update installed.

  https://discussions.Apple.com/message/29202159?ac_cid=ha123456#29202159

• Tecra A4 has stopped working after an hour

  I buy a Tecra a4 and it stopped after an hour labor.
  Using the keyboard or the mouse to restart did not work
  I have to use the power button to shut down and restart after stop down.

  Y does it have that someone could help me fix this problem?

  Maybe overheating problem?
  When you use the laptop? You have enough free space around the laptop for a good air circulation?

  Please also check the fans. If there is dust and debris inside modules cooling so you could try to clean with the vacuum cleaner.

  But generally, if the warranty is valid and the laptop is new so you must take the warranty and contact Toshiba service partner in your country to control the laptop.

  PS: A question: have you used the Toshiba Recovery CD? If this isn't the case, then do it!

• Audio input and output stop working after upgrade 10.2

  Phone 6 s 64Gb

  10.2 - updated iOS updated yesterday

  headphones - original Apple

  problem - when a call or receive a call cannot hear the other person, nor they can hear me.

  Bypass - Press speaker, microphone and speaker start to work, tap new pregnant and everything goes back to normal.

  happens all the time since updated!

  I had this problem too and a simple reboot fixed it for me.

• LCD of Satellite A2450 stops working after two years

  I don't see anything on the LCD screen. What is the solution? I go to the local service center and they ask me to pay $500 for test only.
  It's a shame!
  Can someone give me best suggestion for me?

  Hello

  What! They ask you only for the silver screen 500 test? Are you really sure? What service center is, would be interesting why want it so much money just to have a glimpse of your graphics hardware.

  On the other side, have you tried to connect an external monitor to see if you machine still works? You machine is maybe defective and not only your LCD screen?

  Please give some comments on my ad so that we do a kind of diagnosis ;)

  Welcome them

• Microsoft USB wireless keyboard and mouse stopped working after I bought another identical to another laptop that is 2 meters from the hotel

  I bought another keyboard Microsoft Wireless Comfort Keyboard and Mouse 5000 for my partner as he just got a new laptop.  I liked my as the original and has therefore whoever we decided to buy exactly the same package.  The only problem is, as I plugged my partners, my mouse and keyboard do not work.  I've tried new batteries and I tried to use the usb, but nothing works and there is no reset button on the mouse or the keyboard (that I can see anyway).

  I'm desperate to get it working.  Any suggestions please?

  Thank you

  Hello

  See the keyboard or mouse manual to locate the reset button to zero, to assistance that may help you resolve this problem.

  If you are unable to locate the reset button then, I would say to contact hardware support team.
  http://www.Microsoft.com/hardware/en-us/support

• TrackPoint and Touchpad stops working after recovery from sleep mode

  Every now and then when my thinkpad edge 11 out of the previous day. The pointer doesn't move. It makes no difference if I use the trackpoint or touchpad. In this case I have to restart the computer using the keyboard and then pointing devices up and running again. No one knows how to fix this? The problem does not occur every time during the recovery from sleep mode, but sometimes it does.

  Hey won1,.

  uninstall the current driver for touchpad/trackpoint for your device.

  Windows should then install its own generic drivers. now with generic drivers install, place your unit in standby mode and then resume.

  see if the same error occurs. in the meantime, go to > http://support.lenovo.com and update your drivers in the bios unit.

• Carpet mouse and keyboard stop working after update of windows 8

  Separated from this thread.

  Hello, I'm having the same problem. However, those suggestions did not work for me.

  You can check the following registry key? :

  HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Control\Class\ {4d36e96b-e325-11ce-bfc1-08002be10318}

  To the registry for this key, in the right window, in the world is here, under 'Name', a LowerFilters and UpperFilters value?

  If so, for UpperFilters and LowerFilters, value which is listed under "data"?

  You can also check the following registry key? :

  HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Control\Class\ {4d36e96f-e325-11ce-bfc1-08002be10318}

  To the registry for this key, in the right window, in the world is here, under 'Name', a LowerFilters and UpperFilters value?

  If so, for UpperFilters and LowerFilters, value which is listed under "data"?

• Why 'SAVE', 'SAVE AS' and 'CANCEL' InDesign CS6 functions stop working after a short period of time?

  Why 'SAVE', 'SAVE AS' and 'CANCEL' InDesign CS6 functions stop working after a short period of time?

  Sounds like a conflict. What else is in course, including plugins ID third-party programs or utilities that run in the background on the Mac?

  Also, have you tested in a new user?

• setting up time capsule and express wired after disconnection of the airport

  I have a 2 TB Time Capsule and three 3 wired express airport throughout my house.  I know that when I added first the cable express, that I had to call apple to change some settings.  Now I can't service because they are more than a year and after a recent quick breakdown (two or three) power is the airport expresses link is more and a bunch of my settings seem to have changed on the Time Capsule.  Any help would be greatly appreciated.  Thank you

  If you think there are setting changes, then it would be better to start over.

  • First of all, you want to make a 'factory' reset on all of your base stations. This will return them to their "out-of-the-box" configuration Once finished, leave them turned off.
  • Then, we put up the Time Capsule (TC). Since it has been reset, it will broadcast a Wi - Fi unsecured network with a network name of something like: Apple network NNNNNN.
  • Use AirPort Utility on your iPhone, Mac or PC to configure the TC as a stand-alone wireless router. In other words, configure it to provide a secure WiFi network.
  • Once the TC has been configured, verify that the clients on your network can access the Internet with it.
  • If he succeeds, proceed to the next step. If this is not the case, stop and post back with your results.
  • We will now configure all of your base stations for a roaming network.
  • Power-up one of the three stations based AirPort Express.
  • Once again, you will need to use AirPort Utility to continue. The utility must now find the Express, and if all goes well, it will offer to the Express allows to extend the TC using Ethernet. It's what you want and just go through the steps automated window 'Installation '. And then on actually.
  • Do the same for the other two express base stations.

• Cannot access Time Capsule and MacBook Pro on Windows task force immediately after upgrade to Vista professional professional 7

  I had a Windows workgroup for years, linking the PC and Mac, but also a Linkstation network through a Time Capsule router/Hard Drive Combo.  Immediately after the upgrade from professional Vista to 7 Professional on my Sony Vaio VGN-Z750D, I can see the Time Capsule and MacBook but cannot access it.  I am able to access the Linkstation - system wonder a user name and password, and I have immediate access.  However, the system does not n = me a username and password when I try to access the two Apple products.

  Interestingly, I can access the Vaio MacBook, in providint the username and password for the Vaio.

  Please notify.  Thank you.

  IT FIXED!  Found the answer on the W7 Forum

  Access to Mac OS X Windows sharing Windows 7
  Windows 7 will not work with the Mac OS X Windows support for default share file. If you try to access a shared folder on Mac OS X, W7 will display a logon error repeatedly.
  The problem is that W7, by default, will only use NTLMv2 for authentication, which is not supported by the service of sharing of Windows of Mac OS x.
  The other problem is that safety minimum Session for NTVLM SSP based Clients.
  To work around this problem:
  1. in W7, open the control panel
  3. double-click on Administrative Tools
  4 double click on local security policy
  5 expand "Local policies" and select "Security Options".
  6. locate "network security: LAN Manager Authentication Level" in the list and double-click it.
  7. change the setting of "NTMLv2 only send responses" to"send LM and NTLM - use NTLMv2 session if negotiated"
  8. network Security: minimum session for the NTLM SSP (including secure RPC) Clients security
  9. change the setting of "128-bit" unchecked (No Minimum)
  10. click on OK