Time elapsed between 2 points

Similar Questions

• Time elapsed between each iteration

  Hello

  I'm trying to implement a control system using two while loops, for each iteration that I want to write the elapsed time for an iteration. Furthermore, I would like to write each time in a table. I tried to use the elapsed time. VI, but I could get so far is out of time for the whole performance. I know it must be simple, but I need help.

  Thank you

  Serkut.

  (It does not sound like a good idea to record the elapsed time in a table forever. At some point, you run out of memory. )

  Yet, here is a quick project to a code which measures and records the time of the loop in a table. see if it makes sense. (LabVIEW 2010)

• How to measure the time elapsed between two steps?

  Hello

  In my script, I ask the subsequences. How can I measure the time it takes each subsequence?

  Something like:

  Statement: StationGlobals.TimeElapsed = 0

  -> SOMETHING HERE TO START A COUNTER<>

  call sous-suite

  Popup: Str (TimeElapsed)

  Thanks for help

  StationGlobals.Time = Seconds()

  ... / / stuff in time

  StationGlobals.Time = Seconds() - StationGlobals.Time

  You can also view the sample report of basic step in 2012 TestStand time (you can now download an eval).

• Hanging tool select disabled but time always snaps between sampling Points

  Hello

  In the Waveform Editor, when I Zoom in directly on the waveform, the points become visible. I have 3 Q: -.

  1. What are these points
  2. They can be changed
  3. How can I select (with the Selection tool) anywhere on the waveform?
     1. I deselected waspish and yet I am with zoom basically I can only place the time tool (TST) between the points visible, i.e. hearing snaps TST so I can not place exactly there where I want

  Thank you!

  The points show the individual samples in your digital recording.

  Jump to your last question, you cannot place the time between samples picker because samples are smaller individual representations of the original audio.  the lines between the samples are an artificial creation, making a waveform of samples.   There is an excellent video showing how digital audio works - I recommend highly a cup of coffee and a viewing: D/A and A/D | Digital Show and Tell (Monty Montgomery @ xiph.org) - YouTube

  Spacing of samples is determined by the sample selected speed which, in turn, is controlled by the clock system (Word clock).

  As for the editing... not really.  Older versions of hearing used to allow you to enter a sample and move it upwards or downwards, but the results could be unpredictable - under Nyquist theory there is only one waveform (i.e. one correct) which corresponds to the sequence of individual samples.   Changing a single sample (or even two or three) can force the system that analyzes samples and draws the analog waveform by doing a few calculations confusing, incorrect.   If you watch the video above and "read between the lines" you can see why that would be.

• How to set the time difference between each data when using keithley 2400 scanning

  Hello friends,

  I use scanning Keithley vi the extent of SCANNING and acquire vi. I want to measure the voltage for each step and a pause between each two data, so I need a delay between each I step.

  I'm a starter to use Labview, thank you very much for your answers.

  Perry

  As Dennis says, if you use the built-in scan function, you will need to consult the manual. See Section 10-16 (this is page 10 of article 16, only paragraphs not but 10, 16) for the manual Keithley 2400.

  The Keithley 24xx series has a speed of measurement in units called PLC (Power Line Cycles). The default speed is 1PLC, which means a measure is taken with each cycle of line 1 power supply or 1/60th of a second (16.67ms). 24XX can range from 0.01 PLC (all 0.16ms) 10 PLC (all 166.6ms). The faster you measure, the less accuracy you get.

  To programmatically set this value, the command is

  ENSe:CURRent:NPLCycles

  ENSe:VOLTage:NPLCycles

  Depending on what you are sensing and where is the number of controllers from 0.01 to 10.

  Another factor that will determine the time between data points is the cycle SDM. These are more complicated, look at your Keithley manual for more information. Look at article 6 and article 11 for more information.

  Note:

  PLC times are based on a cycle of 60 Hz US.

• Switch time delay between 3 and back!

  Hello

  I'm trying to figure out how can I switch between three cases in a case structure for a while between each switch.

  For example: I have three cases in a structure of case (case) {0,1,2} where zero is the default case.

  What I want to do is to start in the case of the value by default 0 wait 1 s switch for case 1, wait 1 second switch case 2, wait 1 second back switch for case 1, wait 1 second back to the 0.  Then repeat the order.

  I used the timer elapsed value of the ramp function Tim from a selection function between true and false, but with the additional case I don't think that this approach works.

  Any ideas?

  Search for the term "State Machine". That's what you're trying to invent (nice work) so feel free to 'Cheat' and look for the wheel as it exists today.

  Ben

• Google maps 'directions' between two points stopped working in firefox

  When using google maps to find the route between two points "Get Directions", he will just stand here loading... never finish and showing the routes between locations.
  It used to work fine a month ago. I didn't expect the update to Firefox.

  I opened the Camino to test on this browser google maps and since I did open Camino in a month or so he asked upgraded but also verified 'Flash' and asked at this level because it was outdated. I have tried re google maps "get directions" between two points on Firefox after the Flash update and it worked!
  It is a pity that so much of the web is based on Flash. Yes its cool but its also a huge pain. I wanted to just quickly answer my own post in case others are having similar problems and simply update Flash.
  See you soon

• Distance between 2 points in geo coordinates

  Everyone knows hot to calculate the distance between 2 points on the surface of the Earth, given their contact details?

  (for example: 1=30.45N/43.23E and 2=35.11N/19.05W)

  A program for HP50G or 42, or 41 c would be fine, a formula or algorithm as well.

  Hello andy11

  Forms are to is supported on a perfect sphere (which is not true for the Earth, but it makes it easier):

  The way is to calculate the secant between two points and then calculate the length of the arc between the two points.

  LA1/2 = Latitude of the point 1/2

  LO1/2 = Longitude of the point 1/2

  Transform in x, y, z coordinates on the unit sphere:

  X 1/2 = cos(La1/2) * cos(Lo1/2)

  Y1/2 = cos(La1/2) * sin(Lo1/2)

  Z1/2 = sin(La1/2)

  Calculate secant length s:

  s = ((x2-x1) ^ 2 + (y2 - y1) ^ 2 + (z2 - z1) ^ 2) ^ 0.5

  Half of the s is a sin of angle between the points:

  distance on the sphere:

  d = RE * 2 * arcsin(s/2)

  That's it, easy to transfer this for RPL. The results are of course proven RE RADIUS, so results may differ a bit.

  Greetings

  calcpeace

• Times New Roman 11 point shrunken feel justified with HP UPD PCL 5 results in characters

  Since the duty switch to the driver for HP (PCL 5) universal print several months ago, when we made the jump to Windows 7 (it seem not to be any specific device Windows 7 x 64 drivers for most HP printers) that we had a very specific problem with printing documents (especially from Word 2010).

  When we print a document that has the Times New Roman 11 point police, and that the document is fully justified, the output will of characters that are "crushed" together in different places on the pages.  For example, the 'l' and the 'e' in 'legally' in part of a page could be printed too close, almost on top of the other, while the same Word may appear later in the page and end.

  This strange behavior output is consistent when the document is printed several times with different HP printers (all using the UPD PCL 5).  In other words, the shriveled characters will appear in the same place on the same pages of any printer send us the task to (we have printers ranging from an old 4050N and a whole new m602) or how many times it is printed.

  Since one of our departments has literally thousands of legal documents that use Times New Roman 11 point fully justified, it's a pretty big deal.  For the moment, we have been print these documents to a photocopier to avoid the HP UPD question, but this isn't a permanent solution.  I need to know how to solve this problem for HP printers so we can print documents we have where we need.

  I should mention that I've already updated printer drivers network (Windows 2008 R2) to the last UPD PCL 5 (July 2014).

  I have some ideas on this issue.

  First of all, for more general printing Office such as from Word and other applications of MS Office, you will get the best combination of performance and print quality using the PCL6 driver.   Unless you have a legacy application that requires PCL5, I would recommend moving to PCL6.

  Second, when you moved to the HP UPD did you create new print queues or to update an existing queue by using the new driver option on the Advanced tab of the driver?    When you use the pilot 'new' option, Windows did his best to keep the old queue settings and put them on the new pilot.   This may cause missing, additional incorrect registry entries, corrupt or simply on the queue.      I always recommend to create new print queues when changing drivers.   If you have a large number of print queues that must be deleted and recreated, I suggest you try the AutoUpgradeUPD.exe utility from administrator print Resource Kit (PARK) at www.hp.com/go/upd.     For more information about this utility, see http://youtu.be/mYCVx1RBp9w

  Finally, some Microsoft Office applications save some driver with the file information.   I see this more often with Excel, but I guess that Word may depend on as well.   The problem is that the application passes data from the former driver for the new driver and it can create unexpected results.    To see if this is the case, open the print dialog box, and then click on printer properties to open the user interface for the driver.   It is enough to click OK to close the window and the driver information will be updated in the Word document.    Now, click on print and see if the output is improved.   If Word prompts you to save your changes when you close the document (and you make changes) that's a clue that the driver information has been updated in the .doc file.

• Problems of time elapsed VI

  Hello friends OR,.

  I'm having a problem with my "time up" vi where he would not count toward the top.

  I'm using labview 8.0

  Here's what I'm trying to do in case I do wrong here...

  I'm trying to reset my table of default values after a certain period of time elapsed. I tried to use a node to invoke to do this, but for some reason, that didn't work. So I just put in a case structure and just put 0 constants for the indicators after my time target was reached, but now my time would not count upward...

  Help, please!

  It's really hard to figure out exactly what you want... but I tried to give it a shot. Once, again follow what RavensFan proposed (in addition they won the super bowl)... your architecture suggests that you do the tuturials online (admittedly, I tried not to alter your style/logic...but as suggested there are many improvements that can be made here.)

• distance between all points

  Hi all, I'll try to find out the distance between all points in a chart. I was able to get all possible combinations, but I do not get the expected output.

  For example, if I have four points, the total number combinations will be 6 and I want to find the distance in all combinations of six.

  Please help me where I have error. Please find the attached vi.

  Try something like that.

  Because I don't have the function IMAQ, I use complex data for each point, but it would be trivial to adapt it to your data instead structures.

  

  

• Timer elapsed time in seconds

  Hello

  I want to continually update the timer indicator up every second.  I don't understand why the program does not work?  Can offer you assistance to help me display timed time (in seconds).

  Thank you

  hiNi.

  PS, I know that there is a timer express VI passed, but I would like to know how to display the time elapsed without the express VI. Thank you!

  Why every second?  With each iteration of the loop?

  Since your loop runs every 100ms, you might make a counter using another register shift.  When the counter reaches 10, download your timed.

  Try these screws to see if they do what you want.

• I would like to copy the time elapsed since WMP 11 and paste it into a Word document.

  I would like to copy the time elapsed since WMP 11 and paste it into a Word document. I have this on several occasions, is there a way to shortcut this process through Autohotkey? Would appreciate any help at all!

  Hello

  1. What is the operating system installed on your computer?

  Unfortunately, there is no shortcut key to copy the time elapsed since Windows Media Player.

  You can use your favorite search engine to search for any third party software that accomplishes your request.

  NOTE: third software of third parties, including hardware drivers can cause serious problems that may prevent your computer from starting properly. Microsoft cannot guarantee that problems resulting from the use of third-party software can be solved. Software using third party is at your own risk.

• Measure the distance between 2 points of glare

  Hello

  Does anyone know how to measure the distance between 2 points (attached Image) glare. The image shows 10 sets of points of glare. I appreciate if you can guide me to process the image and produce the algorithm to detect the 10 sets of points of glare and measure the distance from each game.

  Thank you

  Farid

  Check if this will do

• "There is a time difference between the client and the server"

  Unit 4.0.3

  Everything worked very well, and all of a sudden, I'm not able to connect to the server unit using any domain account. When I enter the domain/name username/password, I get this error message:

  ************************************************

  The system is unable to log on due to the following error:

  There is a time difference between the client and the server.

  Try again or contact your system administrator.

  **************************************************

  I can use the same domain account (unityinstall) and the journal in other machines. I can connect the machine to the unit using a local account. There is no time difference between the DC server and unity.

  Need help,

  Thank you

  Partha

  Log on to your LOCAL computer using an account that has privileges

  At the command prompt, type the following:

  NET TIME ancien_mot_passe/set

  Found this on the MS site:

  Cannot open a session if the Date and time are not synchronized

  http://support.Microsoft.com/default.aspx?scid=kb;en-us;232386&product=Win2000