Timer question

Similar Questions

• Watch BONES 2.2.2 time question

  I am facing a problem with my watch since I installed upgrading OS shows. My clock is one hour before and it does not match my real time on my iPhone. Does anyone know a solution to this?

  Hello

  If you are located in Egypt, note that some other users have reported experiencing the same problem.

  It can help to update your iPhone to the latest version of the software, (although instead, you see the same question then applies also to your iPhone):

  Update the software on your iPhone, iPad or iPod touch - Apple Support iOS

  You may need to contact your mobile operator for assistance.

  You can also make Apple to know that you are experiencing the problem:

  • Contact - Support official Apple
  • https://Twitter.com/applesupport
  • https://www.Apple.com/feedback/watch.html

  More information:

  Get help with the date and time on your iPhone, iPad and iPod touch - Apple Support

• March 100th time question

  I'm trying to find a way to set the time in our unit of 100th of March. I want to set the time manually and find a way so he can look for a NTP server to stay accurate. I see nothing in the admin GUI interface or maint to set the time. Any help would be greatly appreciated.

  Hi Steven,

  This is not an intuitive process so don't worry.

  Try the following:

  To set time zone using a console connection and then enter the command 'set of time zone' to specify the time zone in which the device is running.

  I hope this helps answer your question.

  Best,

  Paul

• BlackBerry Smartphones first timer question (sorry!)

  Hey all,.

  I am a newbie to the BB but love until now.  I have a quick and probably stupid question on the calendar - when put in meetings/appointments seem to let me just plan on time. How can I change the start time of something other than time?

  Thank you very much

  Welcme to Frums!

  This isn't a stupid stupid question!  When you go to the calendar application, then click on the menu and NEW, (make sure you are on the desired date) skip to BEGINNING that will show your day and the date and time (which is in hours). You can scroll through the minutes and change the time.

  Enjoy this blackberry!

  _________________________________________________________________________________________________

  If I've helped in some way, please be sure to check the box BRAVO.

  Also, remember to adjust your thread by checking the green box that contains the answer for you.

• Data/time question

  We have a VCenter with ESXi host Version 5.1, our domain controller is sitting in one of the ESXi host and host NTP settings is pointing to the domain controller that is sitting on the same host.

  all other ESXi hosts are also facing this DC as NTP server. All hosts are in the same cluster and our mail servers are also in the same cluster, and they are windows and linux.

  Now face us a question about our electronic messages that are evidence of time and incorrect data! What could be the reasons for this problem? and what is the best practices of NTP in ESXi environment scenario?

  Thank you

  Welcome to the community,

  Our domain controller is sitting in one of the ESXi host and host NTP settings is pointing to the domain controller that is sitting on the same host.

  With the domain controller in a virtual machine, the recommended method to synchronize the time is the point at once - the DC as well as ESXi hosts - to an external time server. Synchronization of the guests with the virtual domain controller could cause problems and should be avoided.

  André

• Method of application for process by running several times question

  Hi all

  In my controller code, application of process method is run several times, and insertion of multiple data in the table, any body can help me how to solve this problem.

  I have the code in my application process below:

  OAApplicationModule m = pageContext.getApplicationModule (webBean) (OAApplicationModule);

  am.invokeMethod ("InsertRecord", null);

  OAMessageLovInputBean oalovinputbean = (OAMessageLovInputBean) webBean.findIndexedChildRecursive ("ccustatus");

  oalovinputbean.setValue (pageContext, "INPROGRESS");

  String userName = pageContext.getUserName ();

  System.out.println ("username is:" + username);

  OAMessageTextInputBean pUserId = (OAMessageTextInputBean) webBean.findChildRecursive ("item32");

  pUserId.setValue (pageContext, userName);

  OAMessageTextInputBean pchangedby = (OAMessageTextInputBean) webBean.findChildRecursive ("item34");

  pchangedby.setValue (pageContext, userName);

  If ((("on").) Equals (PageContext.GetParameter ("rrchkbox")))

  {

  String whereclause1 = (String) pageContext.getTransactionValue ("whereclause");

  String workordnum = (String) pageContext.getTransactionValue ("workordnum");

  String rrnum = (String) pageContext.getTransactionValue ("rrnum");

  String ponum = (String) pageContext.getTransactionValue ("ponum");

  System.out.println ("whereclause test1" + whereclause1);

  String status = pageContext.getParameter ("ccustatus");

  System.out.println ("CLEMENT LINE STATUS:" + status);

  Serializable param [] = {workordnum, rrnum, whereclause1, ponum};

  am.invokeMethod ("getSearchData1", param);

  am.invokeMethod ("checkSelectedrow", param);

  Vcnt serializable = am.invokeMethod ("processPOData", param);

  }

  Below the code written in AM:

  Public Sub InsertRecord()

  {

  XXDPECONTAINERVOImpl vo = getXXDPECONTAINERVO1();

  vo.setMaxFetchSize (0);

  Line XXDPECONTAINERVORowImpl = (XXDPECONTAINERVORowImpl) vo.createRow ();

  oracle.jbo.domain.Number empNum = (oracle.jbo.domain.Number) getOADBTransaction () .getSequenceValue ("XXDPE_CONTAIN_SEQ");

  row.setContainerizationId (empNum);

  vo.insertRow (row);

  row.setNewRowState (rank. STATUS_INITIALIZED);

  }

  Please help me.

  Thank you Manu for your answer, my question set, in fact it was I have attached several region in the page controller, so whenever the page load is run 3 times and the call to the insert 3 times, so I corrceted it now is workign fine.

  Thnaks

  Deb

• Date/time question

  DB version: 11 GR 2
  Toad and office 2010
  
  Hello I am under the sub query in Toad and generators of output to Excel
  a toad, the date for the export format is "Mm/dd/yyyy hh: mm:
  
  question is why is it see the 00:00:00 in the part time unless I use to_char.is it related to the timestamp of midnight? any help is very appreciated
  
  

  select created_date,to_char(created_date, 'MM-DD-YYYY HH:MM:SS') , proc_date,to_char(proc_date, 'MM-DD-YYYY HH:MM:SS')  from orders where order_id = 10;
  
  output
  ##########
  
  
  CREATED_DATE ===      03/01/2013 00:00:00      
  TO_CHAR(CREATED_DATE,'MM-DD-YYYY HH:MM:SS') ===     03-01-2013 12:02:00
  PROC_DATE     ===  03/08/2013 00:00:00    
  TO_CHAR(PROC_DATE,'MM-DD-YYYY HH:MM:SS') === 03-08-2013 12:02:00
                                    

  Thank you

  There is something fishy in your message.

  MM is the mask of the month format. You have specified twice, once for the month and once per minute (MI is the format for the minute mask). It is a fairly common mistake. But then in your output, you're claiming that MM returns a 3 for the month and a 2 for the minute. It is not possible (except something really exceptionally buggy in progress). I strongly suspect that what you have posted here is not an exact copy of what you are currently running or to actually see.

  Justin

• Last post by: time question

  Hi all. I was wondering if anyone else has questions in threads not displayed in chronological order? Normally every day I notice a post or two irrelevant. However, today, all positions in the main section of VMTN appear of all the different moments and some of the different days.

  

  See you soon

  Kevin

  Once the problem has been resolved (all nodes to return to cluster), in my view, there was a considerable time, until the cache has been fixed, and that accounts for the errors.  Right now, I see a correct chronological classification of messages.  Please let me know if you still see this problem.

  Thank you, Robert

  Robert Dell'Immagine, Director of VMware communities

• Timer question, is it possible?

  Hello!

  It's timer.

  Can I add an event to the event handler, which is timer are dwindling click?

  Heck, I can't explain the thing I need!

  OK I'll try that!

  The thing is I need to click on objects and whenever I click on the time of the object between flashing objects are dwindling and objects apear on scene faster with every click on them.

  I hope this helps understand my problem.

  Yes, the timers have another property of late. You could do this:

  var t:Timer = new Timer (5000,0);

  t.addEventListener (TimerEvent.TIMER, dostuff);

  addEventListener (MouseEvent.CLICK, shortentimer);

  function dostuff(e:TimerEvent) {}

  do what the timer is supposed to do

  }

  function shortentimer(e:MouseEvent) {}

  t.Delay = t.delay *. 9;

  }

  Or something on those lines. Whenever the mouse is click that delay the timer would reduce 90 percent of its previous value.

• Linksys EA6100 time questions

  Hello everyone, I'm new here and I recently encountered a problem with my Linksys EA6100.

  So I bought a new router from Linksys EA6100 Best Buy around November 2014. It worked fine until 2 weeks about where every evening between 20:00-12: he just would become unusable in different intervals. It is not the signal that dies, but her intermet. It would really slow down (to the point where I can't load google) for 2 minutes, before quickly going again within 5 minutes, and then slow down again and so on. This does not happen during the day at night, every night.

  I got scared, that it is not the router but the modem, but I recently went for my old Linksys WRT54G Router and even if the signal isn't as strong and as fast, I did not have this problem.

  Anyone know what the problem is with the EA6100?

  Any help would be greatly appreciated, I don't want to buy a new router haha.

  Thank you

  Daniel

  Your Internet settings are good for IPv4. Unless your ISP requires IPv6 you must disable it under Internet settings.

  2.4 Ghz is long range but slower and 5 GHz short range but super fast.

  I recommend allowing the range of 5 GHz and having separate SSID for 2.4 Ghz and 5 GHz signals.

• Rest and time Question

  I'm trying to lead to hours and minutes. In this example, I have 102 minutes that I would turn into hours and minutes. If I take 102 divided by 60 I get 1.7, but then I need a way of prendre.7 multiplied by 60 to come with the minutes. I can't understand this.
  
  
  SELECT 102/60
  FROM DUAL;
  
  The end result should be 01:42 No 1.71.
  
  What Miss me? I tried the mod functions and uncompromising with no luck. Thanks for any help.

  This will do

  select floor( 102 / 60) hrs, 102 - (floor( 102 / 60) * 60) min from dual
  

  Or if you want the string

  select floor( 102 / 60) || ':' || (102 - (floor( 102 / 60) * 60)) hr_min from dual
  
  HR_MIN
  1:42
  

• Min - Max planning of simple questions

  Hello
  I try to use Min - Max planning. The user guide of the inventory indicating that Min - Max Plannig uses a request to assess the order quantity, but do not say if such request per month, year or whatever. Looking for the numbers seems to be the annual demand (but does not match my annual turnover). What kind of request is used?
  If demand is calculated on an annual basis, order quantity resulting should be to meet the sales of an entire year (I guess).
  Is it possible to change this? Does really matter?
  
  Please a few words of counsel
  Oscar

  OPR wrote:
  Hello
  I try to use Min - Max planning. The user guide of the inventory indicating that Min - Max Plannig uses a request to assess the order quantity, but do not say if such request per month, year or whatever. Looking for the numbers seems to be the annual demand (but does not match my annual turnover). What kind of request is used?

  Hi Oscar,.
  According to what level (organization or subinventory) you run mini-maxi planning and the options selected for the net demand will determine which will appear under the open request. Open total demand, or before the application deadline, a selection net demand for reserved and unreserved orders and ONGOING work. It is NOT a month, year or no matter what time.

  Min - Max at the organization level:
  If you choose Yes for net without reservation orders, booked net orders and request for net WIP then open application is the sum of full orders, inventory (including orders reserved) reservations, account question move commands and application component WIP scheduled for issue on or before the application deadline.

  Min - Max in the Subinventory level:
  If you choose Yes for orders without reserve Net and Net booked (without WIP request option here), then open the request matches the sum of reserves inventory (including reserved orders), account number move orders and transfer subinventory move orders to demand because of this subinventory or before the power demand
  Date. Reservations subinventory level inventory referencing a different subinventory, or with no specified subinventory, are not included.

  for example if the application deadline is June 30, 2009 and net options have been included as Yes and then he's going to pick up the order until June 30, 2009 (Note: some applications reports have part time question while comparing dates, so in these cases, 30 June 2009 is taken as 30 June 2009 00:00:00 i.e June 29, 2009 midnight!).

  Also if you specify a past date for the cut in demand date, that it would consider open requires available, if necessary, until this last date (but you plan for the future, not past).

• Windows Update / SvcHost.exe 100% Cpu in the Task Manager

  This I know is not new to too many of us. Again - it's November 2013 and I would like to know how it happened AND what to do to fix it! Since 1997, I've built a lot of computers. I've never had this problem occur up to this relocation. Have reinstalled XP for XPSP3 several times. Don't waste time questioning my knowledge. Idem: components, motherboard, memory, nothing has CHANGED. The only thing that is different IS - when I finished installing Windows XP with Windows XPSP3 - tested the functionality - fast as * - magazine 'OBSERVER of EVENTS' - no problem, constantly check the CPU usage - low. My next step to activate Windows update to get updates to secure my system. Of course, the CPU spikes at 100% - due to a service request host CPU! I have to say - IF the meter would have a parameter to 200% - I have no doubt she would be higher than 100%. Even if I am sure of the rightness of my process to install the OS (once I've done several times over the years), I decided since I have not loaded any other thing - I format the drive (Nov 19) and start all over again. I'm sitting here today, with a computer case with components of audited operation, with a properly installed OS, motherboard drivers installed - do anything else and I can't do windows updates. Note: the first attempt install (17 Nov) - I tried the advice on Microsoft sites, the fix it systematic, installation recommended a version of net framework without result. There are also other tips to run a routine (don't ask--I do not dig up these data) in 'safe' mode which also failed to remedy. Frankly, I rarely use advice of experts even out there, but I decided that if it worked or not - I wanted a new facility, one last time to have a computer working properly that I built myself and gift. I'm getting old - at a time of my life when you start to reduce their material possessions. How is it possible that someone can do something of so many times with the certainty of having this problem and read both of are amazed with this? And spare me the absurdity of the verification of malware, viruses, bad drivers. This computer did not have any exposure to having these problems! We can safely assume is not a problem with hardware - even working properly - as much with this same question described the components that are very different. My deduction is: something is wrong in the Center Microsoft update or Windows update, I tried both! I believe (leaving aside the suggestions of some of the shenanigans) too trying to pass - after all the updates about 120 give or take a little number of. In any case - if there is no assistance 'out there' to answer a customer to Microsoft who bought Windows3.1; Windows 95; Windows 98; Millennia-old Windows; Windows Xp Windows Vista on my wife's computer. Windows 7 on my build recent just to enjoy the music - I would like to than the courtesy to get a solution to this problem. It seems very simple to me someone at Microsoft to round the most important security updates - onto a disk (compressed - many of us have a big hard drives and WinZip) and provide them with we ONLY CHARGE for POSTAGE - OK, OK adds a dollar or two. Leave aside the patches for patches. You know what it takes. The purchase of new hardware or OS systems is out of the question WHY? Because either we cannot it and above all - WE HERE ARE STANDING BY a product Microsoft WE believe! Try to make it in time for Christmas - he will do much for the image of Microsoft. Have a happy Thanksgiving to all!

  This I know is not new to too many of us. Again - it's November 2013 and I would like to know how it happened AND what to do to fix it! Since 1997, I've built a lot of computers. I've never had this problem occur up to this relocation. Have reinstalled XP for XPSP3 several times. Don't waste time questioning my knowledge. Idem: components, motherboard, memory, nothing has CHANGED. The only thing that is different IS - when I finished installing Windows XP with Windows XPSP3 - tested the functionality - fast as * - magazine 'OBSERVER of EVENTS' - no problem, constantly check the CPU usage - low. My next step to activate Windows update to get updates to secure my system. Of course, the CPU spikes at 100% - due to a service request host CPU! I have to say - IF the meter would have a parameter to 200% - I have no doubt she would be higher than 100%. Even if I am sure of the rightness of my process to install the OS (once I've done several times over the years), I decided since I have not loaded any other thing - I format the drive (Nov 19) and start all over again. I'm sitting here today, with a computer case with components of audited operation, with a properly installed OS, motherboard drivers installed - do anything else and I can't do windows updates. Note: the first attempt install (17 Nov) - I tried the advice on Microsoft sites, the fix it systematic, installation recommended a version of net framework without result. There are also other tips to run a routine (don't ask--I do not dig up these data) in 'safe' mode which also failed to remedy. Frankly, I rarely use advice of experts even out there, but I decided that if it worked or not - I wanted a new facility, one last time to have a computer working properly that I built myself and gift. I'm getting old - at a time of my life when you start to reduce their material possessions. How is it possible that someone can do something of so many times with the certainty of having this problem and read both of are amazed with this? And spare me the absurdity of the verification of malware, viruses, bad drivers. This computer did not have any exposure to having these problems! We can safely assume is not a problem with hardware - even working properly - as much with this same question described the components that are very different. My deduction is: something is wrong in the Center Microsoft update or Windows update, I tried both! I believe (leaving aside the suggestions of some of the shenanigans) too trying to pass - after all the updates about 120 give or take a little number of. In any case - if there is no assistance 'out there' to answer a customer to Microsoft who bought Windows3.1; Windows 95; Windows 98; Millennia-old Windows; Windows Xp Windows Vista on my wife's computer. Windows 7 on my build recent just to enjoy the music - I would like to than the courtesy to get a solution to this problem. It seems very simple to me someone at Microsoft to round the most important security updates - onto a disk (compressed - many of us have a big hard drives and WinZip) and provide them with we ONLY CHARGE for POSTAGE - OK, OK adds a dollar or two. Leave aside the patches for patches. You know what it takes. The purchase of new hardware or OS systems is out of the question WHY? Because either we cannot it and above all - WE HERE ARE STANDING BY a product Microsoft WE believe! Try to make it in time for Christmas - he will do much for the image of Microsoft. Have a happy Thanksgiving to all!

  Hi Joseph,.

  Follow these steps.

  Go to Start | Settings | Control Panel and double click on automatic updates.

  Check mark the option at the bottom to turn off the automatic updates.

  Click apply/OK, and then restart.

  Svchost consumes always 100% cycles CPU?

  If this is the case, follow these steps.

  Click Start, run, copy and paste this command and click OK: services.msc

  In the list of Services, you can see Background Intelligent Transfer Service ?

  Here's a pix what he looks like.

  

  If it is not listed, follow these steps to register the BITS service.

  Open the Windows search tool, copy / paste the following text, and then click Search: qmgr.dll

  Research should show this file in the following locations:

  C:\Windows\System32
  C:\WINDOWS\ServicePackFiles\i386
  C:\WINDOWS\system32\bits

  It may be present in C:\WINDOWS\system32, but if you can see it, follow these steps to register the service.

  Click on start, run and copy/paste: regsvr32 qmgr.dll and click OK

  Do the same with this file: regsvr32 qmgrprxy.dll

  Reboot the system and then copy / paste this command into the field run:
  %windir%\System32\rundll32.exe setupapi, InstallHinfSection DefaultInstall 132 %windir%\inf\qmgr.inf

  If you are prompted to insert the Windows installation CD, ignore this and in the dialog below, replace the path C:\WINDOWS\ServicePackFiles\i386

  If you could only see qmgr.dll in C:\WINDOWS\system32 you can change the path to that instead.

  Restart the PC and then go to the Services and you should be able to see BITS in the list.
  Double click on it and then on the general tab, click the Start button to start the service manually. This is just a test to make sure that it works correctly.

  If you get 2 error: cannot find the specified file, click on start, then run again and copy / paste the following command, and then click OK:
  Tracking Add HKLM\SYSTEM\CurrentControlSet\Services\BITS\Parameters /v ServiceDll /t REG_EXPAND_SZ /d %windir%\System32\qmgr.dll

  Reboot again and try once more to start the PIECES. It should work fine now, but in the unlikely case where it fails again, run the following command, and then press ENTER:
  Reg add HKLM\SYSTEM\CurrentControlSet\Control\BackupRestore\FilesNotToBackup

  Reboot once more and then do the following.

  Go to this link and install the IE8 December Update:
  http://www.Microsoft.com/en-GB/download/details.aspx?ID=41404

  If you use IE7, use this link instead:
  http://www.Microsoft.com/en-GB/download/details.aspx?ID=41442

  Finally, go to the Windows Update site and you should be able to download normally.

• 8500 all-in-in-one under Win 8.1 installation

  New Dell computer; try to install 8500 A909a I've had for 2 years on a HP Pavilion

  Dell is running 8.1 Win

  Downloaded OJ_AIO_P8500_fULL_wIN_140_408. The expansion has worked but then I get the error that file cannot be found - the title bar displays User/.../Temp/7zS4AC/Setup/hpzpnp01.exe

  However, this file exists in the specified folder.

  HP tech tried for 2 hours without success (very kind to attempt the same unit out of warranty).

  She was installing a simple driver so I can print and I can scan using Fax & Scan software to win 8

  But there is no HP Solution Center so I can't OCR

  Any ideas what to do next - buy a new printer?

  Hello

  If you want to deal with him in the future, I would suggest trying the following steps and still further me seems should solve the problem.

  Just out of curiosity, can have McAfee software on your PC from Windows 8.1?

  I personally just to be able to reproduce the same exact error for the first time (after installing many drivers of HP version 14.8 without any problem in the past), the question began to appear as soon as I installed Mcafee LiveSafe on my pc, as soon as I disabled the McAfee protection in real time questions immediately disappeared and the installation is complete.

• Computer freezes for a split second every 3 seconds, the cursor disappears for a split second and the clock freezes and restarts.

  Original title: OS time questions continuum (microfeezes)

  It seems that my computer freezes for a split second every 3 seconds approximately. My cursor disappears for a split second, and because the clock freezes and restarts, it displays a worst time of the day. Audio and video have the same gel splitsecond. The problem persists in safe mode. Dell Inspiron 1520, servicepack2 of vista running. I've never had any problems with this machine. Here's a video I took of the number: http://youtu.be/fbUeK8U7wHw

  I would like to know if there is other info/specifications that could be useful.

  Thank you.

  Good,

  1:
  Updated the chipset drivers even though it said I was with the best.

  2:
  Run a SFC scan, which revealed no violations of integrity or files not repaired.

  3:
  five hours and 8 infected files later, my computer is totally cleaned.

  I opened the event viewer, but I don't know what I'm supposed to be looking for. There are many changes to the machine because it began to act up, which were intended to correct the problem. I installed the Service Pack 1, then 2, scan MS Safety and new chipset.

  I also ran a memory diagnostic, but all was well.

  What should I look for in the event viewer? I know that the problem started in a 12 hour window. Should I save and post the logs at the time?

  There is a certain mystery. We need Sherlock Holmes.

  -UPDATE

  I have reset the system to its factory settings. Now, it's as if it were new.

  The problem persists. He still hiccupping. It freezes again for a few milliseconds about once per second. And I'm going crazy.

  UPDATE 2-

  The computer was closed for about 12 hours and when it restarted and Windows initialization complete, the problem disappeared. It works normally for a vintage computer 2007. I'll let you know if I learn more.