Timewarp / time remapping works not well?

Similar Questions

• Time Warner wireless works not well with my laptop Dell Inspiron... Help!

  I use Time Warner Cable as my Internet service provider. However, my Dell Inspiron laptop does not seem to work well with it. It is said that I am connected to my computer with full bars no matter where in the House and I can browse the internet most of the time, but often, the connection is cut and I can't watch videos on the internet without him having to buffering every two seconds, even on the lowest of low quality. I cleaned my computer, released space, tried to get closer to the router, using different browsers, but nothing helped. I think it was something wrong with the internet except my two computers work well with her roommates and one has a Mac and the other has a Samsung laptop. However, my laptop connects both Internet everywhere elsewhere I'll and have a Wi - Fi access, so this makes no sense. How can I get my laptop to better synchronize with my internet at home? Competent advice would be greatly appreciated

  What site you run to?
  What browser do you use?

  Try using a wired connection and test if you are able to broadcast normally or not.

  If the problem persists when you use a wired connection, you can try a system restore back to a point before this problem started.
  http://Windows.Microsoft.com/en-us/Windows7/products/features/system-restore

• Acer e-111; keyboard not working not properly; must support at least 7 - 8 times; capital works very well

  need to press keys minimum 7 - 8 times. Windows 10; has resorted to the use of the screen keyboard. keyboard is the integrated laptop keyboard, noexternal or usb attached.

  This allows to solve the problem:

• Why the Date is always shown when I move my mouse over the clock in the taskbar? Most of the time, it works very well!

  Why does the Date not always appear when I hover my mouse by the clock in the taskbar on my Tablet? It displays immediately if I click somewhere near where on the clock.

  Often it doesn't appear when I go through the clock. Sometimes, it does. I don't know why he sometimes reacts different.

  And didn't someone jump in and start accusing malware etc. Just read my profile. That is not the issue and I don't want to be around anyone who wants just the head in this direction from the outset or even at all! Sorry on my intolerance but I think there are far too many people on the forums who dive on the issue of malware when someone asked a Question on how to change their settings to stop something that happens. I'm sick of this lazy malware junk.

  This is a bug. All XP do. Clicking the taskbar if it "development works most of the time.

• New Inspiron 7548 times Ctrl works not

  Hello

  So I recently got a new laptop Inspiron 7548, earning 8.1, i7 5500U, 16 GB of RAM... and the offset nor buttons Ctrl worked-, I have run the dell diagnostic after noticing my Ctrl-C, etc functions, were not working. They sent me a new keyboard that I installed it but it still does not work. I tried to reset the system, uninstall/reinstall drivers... nothing worked.

  Please help, I work a lot with Adobe products and not being able to use the shortcuts is really slow down my work.

  Jenna

  Hi petheana,

  Thanks for posting.

  Since this is a new computer, and still under warranty, you must call Technical Support in your country again and solve the problem, this may seem to be more than just the keyboard or the drivers.  Thank you.

  Kind regards
  Robert

• Graphics driver work not well on the Satellite 1410 304

  Hello
  I installed the latest graphics card driver on my TS S1410-304 (last self-actualization can find anyway...) and about 1, 5cm from the right part of the screen disappeared. I mean this computer think they aren't there, even if I set the screen resolution of 1024 x 768 (969 x 768 is by default), it behaves as I put on the wider resolution that the monitor has and scrolls to this invisible corner. GC is GeForce 4 420 go. Does anyone know how to fix this?

  Hello

  Where did you downloaded the graphics driver and what graphics driver did you use?
  You must use the graphics drivers from Toshiba. These drivers are specifically designed for the use of the laptop and other graphics drivers for example, from the manufacturing of the graphics card are designed for use on desktop computers.

  Therefore, follow the above proposed link and install the driver from the Toshiba page.

• My external hard drive (Time Machine) has not been saved for a month.

  A month ago I left town for a week. After coming back, I noticed my icon time machine backup constantly Menu bar, but I paid no attention until three days when he tried to save in vain, I noticed. I tried to disconnect and reconnect my external hard drive, but it still does not work. Nothing has really changed any other times where I was out of town and time machines worked perfectly well. The only thought I have, which could prevent the machine from time to work, is that I've been reluctant to do the software update. I heard terrible things about the captain, especially when it comes to iPhoto, and iPhoto is my main thing on my computer... so I had voluntarily decided to not update. Do you think that this is what is causing the problem? Thank you very much.

  You him have not said if you did all troubleshooting. Tell us what troubleshooting have you tried, and then we can give you an idea.

  Furthermore, El Capitan is very stable. However, you should not pass until your system is stable.

• Real-time application does not work; source code works very well

  The short version is I'm programming a cRIO and apparently the RT code isn't running after you deploy, and I can't understand why. It is further complicated as I do all this remote and I don't have direct access to the unit since I am 500 miles away. I work through a couple of other guys who know some LabVIEW, but neither is working on the site so that they explicitly trip there whenever I have a bright idea.

  I was there a few weeks ago. During this time, I created a code simple cRIO, since I'm new to the cRIO, allowing the user to move a control and change a chart. It worked fine, but I must stress that it did not have a FPGA component. After that, I worked on the actual code, which reads some sensors, displays the results on a user interface and stores the results. Did FPGA. I used it in the LabVIEW environment and it worked fine, but I ran out of time before I could finish a release build and deploy the RT as a compiled application. I sent them the version later, my contact deployed but had the network stream errors during execution of the user interface.

  After hours to address network problems and sending over debug versions, I tried to create a log on RT level so I could see what was going on. The journal is not yet open, even if it is the first command in the code. I have pores through the forums and found http://forums.ni.com/t5/LabVIEW/cRIO-Troubleshooting-creation-and-deployment-of-startup/td-p/1956475... which took a new direction.

  I had my contact use the RT debug console and when it pulls up to the front of the RT, it shows an arrow broken at delivery. He clicked and nothing happens - no work, no list of bugs. If he shoots to the top of the list of bugs manually, it is empty. Again, the RT works very well if you run it through LabVIEW and not as an application compiled in real-time. He also noticed that the open FPGA VI was grey on the block diagram. Are no other icons.

  If the problem seems to be that the compiled application of RT becomes some kind of error, but do not tell me what it is, and it seems to be related to the opening of the FPGA. I recompiled the FPGA and RT. I recompile the RT himself, but not the FPGA, because this would take hours. It is download everything properly for the cRIO. The RT is set to run automatically. It is restarted the cRIO whenever he deploys the RT. They have LabVIEW on a computer, but it doesn't have the correct drivers to run the code of the environment of LV. I am to resist have them install the dirvers because downloading big files is complicated due to the restrictions of security as well as a lousy connection at a remote site. In addition, it does not solve the problem of RT executable doesn't work is not the same as the source code, which, according to the thread above, seems to be a thing.

  The last thing I'm getting is that I sent her instructions for how to build a source distribution of the project that I sent and try to deploy on the cRIO. Even if it works, I'm not sure that this is an acceptable solution, because I assume running VI, rather than the EXE is slower, and they need to speed on this project.

  Simply, I don't know where to go from here. I probably need to get direct access to the cRIO and I might be able to convince them to ship to me so I can understand this point, but I don't know where I got same departure other than the Voodoo debugging standard of "trying stuff randomly until something works". I am open to suggestions, if someone managed to solve this before.

  Code snippet of the first part of the project is fixed, although I don't know how much what good it will do. I am really confused, and the customer is frustrated with how much budget is going to solve this problem.

  
  

• lov works not very well when it is run the second time

  Hello
  
  I have a lov VO with the following query:
  
  Select distinct attribute1, org_id po_headers_all where org_id =: 1
  
  When I run the vo in LOV AM
  vo.setWhereClauseParams (null);
  vo.setWhereClauseParams(0,iOrgId);
  vo.executeQuery ();
  
  LOV region:
  
  Attribute1 is messageStyledText with the real licence to search
  Org_id is the value of the form
  
  Lov maps:
  LovMap1 for basepage lov: true research permit
  Selective wrong search criteria
  
  LovMap2 for the Org Id
  Make a single value of the form OrgIdFV
  fact OrgIdFV as part of criteria.
  
  When I run the page, it works very well with a % and tab once. Second time if I delete the value a lov in entry and write a % and a tab once again, this Type of column not valid error
  
  Help, please.
  
  Thank you
  POOJA

  POOJA,

  This will not work unless you write the VOImpl executeQuery method. that is to replace the standard executeQuery method.

• Motion/opacity (yet) does not when you use the time remapping effect

  OK: Here's my meat. This bug has been around for CS3 and CS4. I was hoping this would be fixed with the arrival of CS5, but apparently it still has not been resolved.

  If you use the time remapping effect in the body, you can not use the other features of keyframing, such as movement or opacity. If you do, the video simply disappears. Rendering will not help either. The only way to get the opacity of the function is to overlay a video black bar on the top of the element (or any other cache of color if you like fantasy) and have the opacity on this clip in reverse work. How to get movement in these clips remapped time to work is still somewhat a mystery to me...

  Has anyone found this tedious, boring/irritating?

  So, when can dear Adobe, we expect a fix for this? If all goes well before CS6.

  Thank you very much.

  Richard

  Yes, it's a real annoying bug.
  Simple around - after work you time-remapping your clips, nest (control-click on the clip and select 'nest'), then you can change the opacity normally.

• Quick Time Player does not work in El Capitan

  Now Quick Time Player does not work properly.  When I click to use it, the only thing it allows me to do is 'click to drag', while he was recording a screen, buttons disappear and the only way I can stop the recording is to go to the menu screen and exit the Quick Time Player.  So annoying!

  It also is not allowing me to change.  When I try to edit my videos and then save it, it says that it cannot save the file.

  None of this makes no sense at all.

  < published by host >

  You have a bad installation, I believe. QT works fine on my systems.

  El Capitan works very well. Sometimes, it is not for lack of the tennis racket. Review download and reinstall OS X El Capitan 10.11.4 Combo Update.

• I'm using Time Machine (1 TB), works very well, but because full starting to delete previous backups. Can I add another (LaCie 1 TB) HARD disk for backups? If so, how to proceed. Thank you!

  I'm using Time Machine (1 TB), works very well, but because full starting to delete previous backups. Can I add another (LaCie 1 TB) HARD disk for backups? If so, how to proceed. Thank you!

  You can add another drive to accept backups Time Machine... assuming it is correctly formatted for Mac to Mac OS extended (journaled), but things are not exactly "continue."

  You have not indicated if you intend to add the player to the USB port on the Time Capsule, or connect directly to your computer using USB or FireWire connections. Or the other method works, with the option to connect directly to the computer being the faster connection.

  Once the disc is added, you would go in Time Machine preferences (click the "clock" at the top of the screen on your Mac) to add the disk for Time Machine backups and delete the old Time Capsule disk, since backups will go is no longer this destination.

  Since you have a new drive, Time Machine will do a new full backup of your Mac and then go forward with incremental backups.

• Portege M600 - ConfigFree does not work very well

  Pls help friends...

  I've used it before very well with ConfigFee.
  Once I changed the profile, the LAN and wireless IP change correctly.
  I m on WinXP SP2. I just reinstalled Windows and ConfigFree does not work very well.

  I have LAN IP and wireless in this profile.
  I have the problem when I change the profile, I received the error message for the wireless IP does not change (the question did not pass.) TCP/IP configuration

  The following may be responsible for the failure. Wireless LAN Utility is active (Please close the utility). Network Properties window is open (Please close the window). The Internet options window is open (Please close the options window). I use PROSet to control the wireless.

  I tried the solution proposed and even reboot my laptop, but there s no chance...
  Can help you pls?

  First of all, you can use a single tool to configure WLan.
  You cannot use Windows WLan configuration option, the Intel ProSet utility and ConfigFree at the same time.

  Second, I put t understand why you use ConfigFree to Wlan configuration.
  In case you, I advise to use the Intel ProSet tool or clean Windows WLan settings.

  In addition, I put t understand why you change the LAN and Wlan profiles?
  In all profiles of your Wlan IP address must be set to automatic as the WLan router automatically assigns the IP address.

  But like I said above; only one WLan configuration tool can be used!

• Sites Web open do not, but other applications internet like Skype, viber, messengers works very well

  Hi guys,.

  It comes to Nilesh, I really need help in this case.

  Since last week, its been observed on my Dell Inspiron 3521 to i5 with HDD 750, 4 GB of RAM (Service Tag # ), that in spite of the use of 10 Mbps ethernet speed cable, the site does not open unless I restart the computer each time but other applications such as Skype video calling, viber works very well, the torrent files are also downloaded great at high speed.

  What I've done so far-

  (1) the connection on the router - OK

  (2) RJ45 Ethernet connector was broken - fixed.

  (3) Firewall setting - ON (default)

  (4) I've restored the system as well.

  (5) Avast Anti-virus manually installed on my PC and its ON 24 / 7 and I also scanned my computer and not threats that will find there also.

  (6) my system is up to date, I have downloaded a few applications for the Dell software update on my 3521. So, it updates the new versions automatically and automatically restarts the computer.

  (7) I have tried to connect my laptop directly with the cable coming from the wall too, still the same problem.

  Despite all this, the only problem Im making ' is difficult, impossible to open the Web site. I can open the Web site but only when I restart my laptop and that too for only 10 or 15 or 20 or 30 minutes. After that, one more time of site question. I mean, the Web sites stop opening after 20-30 minutes.

  Some of my friends, colleagues suggest me to get the laptop formatted.

  So, my request here is, do I really format my C drive? If there no need other alternatives, please please please share. (but, before that, please read everything that I did on my 3521 far to avoid a repetition)

  If other than all of the above, and if I need to format my C drive, let me know the procedure of formatting PC which I think will be clean the PC and start from scratch. So far I got the backup of my C drive to the D drive.

  I would appreciate your help in this matter, as its so frustrating. I hope you understand my situation here.

  Thank you very much!

  Nilesh

  Hey you!

  You simply Rock buddy...

  What a most satisfying to your precise support of bar.

  I followed the steps you told me, and I was able to download successfully from chrome and mozilla firefox, as well as the software application anti malware free one that told you me... and did a quick scan by your suggestion. And, guess what, there were approximately 136 flaws that I deleted the system. (BDW, digital defects had a few registeies also, but not sure if I did it correct that I removed, could you explain me basically what it is, is it a virus or what and how is it that night my computer?) Just for my tech knowledge.)

  Now, my system works like a butter on a roll. You just need a raise!

  G $ thanks to you, Ricki.

  Nilesh

• Printer Panasonic kxp 2123 xp of windows 7 works not very well

  Printer Panasonic kxp 2123 not work windows 7 works very well xp

  Hi, Oliver,.

  Have you installed the printer software?

  http://www.Panasonic.com/business/documents-Imaging/downloads.asp

  It works with Windows 7 before?

  Are you receiving error messages?  Post back verbatim, if you please.

  Look in the event viewer for errors that coincide with the date and time that the printer did not work.

  If the software has been installed and the printer worked, try the following:

  Start > type services.msc

  Press enter

  Scroll down to print spooler

  Right-click on the spooler and select stop

  Wait for Windows to stop the spooler

  Go to control panel > printers folder

  Right-click on the printer icon, then select open

  Do you see the documents listed in the print queue?

  Click file > cancel all Documents

  Start > right click on computer

  Select manage

  Click on continue in the UAC window

  Select Device Manager

  Click on the + sign next to Ieeee... compatible printer

  Right-click on the driver and select uninstall

  Click on the + sign next to imaging devices

  Right-click on the driver and select uninstall

  Click on the + sign next to printers

  Right-click on the driver and select uninstall

  Click on the + sign next to Bus USB controllers

  Right-click on the printer driver and select uninstall

  While the printer is turned on, unplug the cable from the printer

  Unplug the cable from the wall outlet

  Leave 5 minutes

  Plug the cable into the wall jack, and then the printer

  Restart your computer and let Windows install the drivers

  Open Services.msc and start the print spooler (follow previous directions)

  Try printing again