Tinker has continued to record on my profile

Similar Questions

• 7 Windows 7 MCE has continued to record after changing hard drives

  Tuners work;  I can watch live TV with them.  Press Kit and messages error, says the save fails.  I need help with a problem.

  I used this setup for about two years.  Never a problem with registration.  Recently had to replace the hard drives.  After installation and Windows Home Server restore everything worked.  On a couple of days later I started having missing records. I am at a loss on how to proceed.
  When you save to?
   
  can you go into the settings and change the save location (even in a new folder
  on the same drive) for a few days and see if the problem is resolved?
   
   
  Barb
   
  MVP - Windows/entertainment and connected home
   
  http://digitalmediaphile.com/
   
  Please mark as answer if that answers your question
   
   
   
   

• Why my event viewer has continued to record events?

  I heard a strange noise come from my speakers to the computer occasionally, so I made an indication of the time when it finally happened. Not a of other things first, then open the event viewer. There are no entries since 19:30 yesterday. It is not normal that my setup. Event Viewer always displays something during the day, even just minor activities. Any tips?

  http://support.Microsoft.com/kb/555632

• Firefox has continued to insert my password since version 23.

  Firefox has continued to insert my password since version 23 (only on this computer). When I'm trying to connect, it inserts my login only, without a password. "Remember passwords for sites" is enabled. Also, I can see all my password in the "Saved passwords" window
  I have another computer with Firefox (Firefox Sync, same extensions and plugins, same settings) active, and it works fine there.

  Make sure that you run not Firefox in private browsing mode (permanent) (don't forget the story never).

  • https://support.Mozilla.org/KB/private+browsing
  • Tools > Options > privacy > Firefox will be: "use the custom settings for history".
  • Uncheck the box: [] "always use the navigation mode private.

  Start Firefox in Safe Mode to check if one of the extensions (Firefox/Firefox/tools > Modules > Extensions) or if hardware acceleration is the cause of the problem (switch to the DEFAULT theme: Firefox/Firefox/tools > Modules > appearance).

  • Do NOT click on the reset button on the startup window Mode without failure.
  • https://support.Mozilla.org/KB/safe+mode
  • https://support.Mozilla.org/KB/troubleshooting+extensions+and+themes

  If it works in Mode safe mode and normal mode with all extensions (Firefox/tools > Modules > Extensions) off and then try to find which extension is the cause by allowing an extension at a time until the problem reappears.

  Close and restart Firefox after each change via "Firefox > Exit ' (Windows: Firefox/file > quit;) Mac: Firefox > quit Firefox. Linux: Firefox/file > exit)

  • If you have many extensions then first turn on half of test extensions that half the problem.
  • Continue to divide the bad half that still has the question until you find that one is causing it.

• McAfee has continuously detects svchost.exe as a virus on XP

  Hello

  I have Win XP as my OS & Mcafee man. 8.5.0i my protection against the virus.

  McAfee has continuously detects svchost.exe virus (detected as Boaxxe.dr) in C:\Documents & settings\temp\ *.

  Can anyone help me in this matter.

  Concerning
  Mukesh

  It's probably a virus as svchost.exe should be in the Windows\System32 directory. McAfee is not very good then do a removal of malware further:

  Through these generals the malware removal not systematically - http://www.elephantboycomputers.com/page2.html#Removing_Malware

  Include analysis with David Lipman's Multi_AV of and follow the instructions to do all scans in Mode without failure. Read the Special Notes about the use of Multi_AV in Vista.

  http://www.elephantboycomputers.com/page2.html#Multi-AV - instructions
  http://tinyurl.com/yoeru3 - download link and further instructions

  When it failed, download Guided Help. Choose one of the specialty forums listed on the first link. Save and read his FAQ display. PLEASE DO NOT DISTRIBUTE NEWSPAPERS IN MS FORUMS

  If you can't do the work yourself (and there is no shame in admitting this isn't your cup of tea), take the machine to a professional computer repair shop (not your local equivalent of BigComputerStore/GeekSquad). Please be aware that not all shops are skilled at removing malware, and even if they are, your computer may be so infested that Windows will have to be properly installed. If possible, have all your data backed up before taking the machine into a shop. MS - MVP - Elephant Boy computers - don't panic!

• I created a new Admin account and when I went to her, I got the message: "The service user profile Service has no logon. The user profile Service failed to load.

  I created a new Admin account and when I went to her, I got the message:

  "The service user profile Service has no logon.  The user profile Service failed to load.

  What's up with that?

  Hello

  References to Vista also apply to Windows 7.

  You can try to fix it with Safe Mode - repeatedly press F8 as you bootup. The ADMIN account in trunk
  Mode has no default password (unless someone has changed the password so it should be available).

  Some programs such as the updated Google (if you added the toolbar Google, Chrome or Google Earth)
  has been known to cause this problem.

  Error message when you log on a Windows Vista-based or Windows 7 using computer a
  Temporary profile: "the user profile Service has no logon. Unable to load the user profile.
  http://support.Microsoft.com/kb/947215

  Difficulty "the user profile Service has no logon. User profile cannot be loaded. "Error in Windows 7
  http://www.SevenForums.com/tutorials/186131-user-profile-service-failed-logon-user-profile-cannot-loaded.html

  How to fix error "your user profile was not loaded correctly! You have been connected with a
  temporary profile. "in Vista & Windows 7.
  http://www.Vistax64.com/tutorials/135858-user-profile-error-logged-temporary-profile.html

  BE VERY CAREFUL IF YOU USE THIS ONE:

  DO NOT USE THE ACCOUNT HIDDEN ON A DAILY BASIS! If it corrupts you are TOAST.

  How to enable or disable the built-in Windows 7 Administrator account
  http://www.SevenForums.com/tutorials/507-built-administrator-account-enable-disable.html

  Use the hidden administrator account to lower your user account APPLY / OK and then lift it to ADMIN.
  This allows clear of corruption. Do the same for other accounts if necessary after following the above message.

  You can use the hidden - administrator account to make another account as ADMINISTRATOR with password even
  (or two with the same password) use a test or fix the other.

  You can run the Admin account hidden from the prompt by if necessary.

  How Boot for Windows 7 System Recovery Options or use a Windows 7 boot disk.
  http://www.SevenForums.com/tutorials/668-system-recovery-options.html

  What are the system recovery options in Windows 7?
  http://Windows.Microsoft.com/en-us/Windows7/what-are-the-system-recovery-options-in-Windows-7

  How to create a Windows 7 system repair disc
  http://www.SevenForums.com/tutorials/2083-system-repair-disc-create.html

  If you cannot access your old account, you can still use an Admin to migrate to another (don't forget
  always leave to an Admin who is not used except for testing and difficulty account).

  Difficulty of a corrupted user profile
  http://windowshelp.Microsoft.com/Windows/en-AU/help/769495bf-035C-4764-A538-c9b05c22001e1033.mspx

  I hope this helps.

  Rob Brown - Microsoft MVP<- profile="" -="" windows="" expert="" -="" consumer="" :="" bicycle=""><- mark="" twain="" said="" it="">

• The user profile service has no connection could not load profile __User

  I use Windows 7 ultimate, I can't log on to the computer that shows me that "the user profile service has no connection. Unable to load the user profile.

  So how do I do?

  This error can usually be fixed by following the steps below. All this requires a certain level of computer skills. You know better and that take the machine to a competent local computer tech (not a type of BigComputerStore/GeekSquad place) is the best solution for you.

  1 log on to a different user account with administrative privileges. If you neglected to make an account additional administrative steps 2-3. Otherwise, continue to step 4. See also General information on setting up the accounts of users at the end of this post.

  2 in Mode safe boot. This, by repeatedly pressing the F8 key as the computer starts. That you will get to the menu on the right where you can use your arrow key to select Mode safe [Enter]. The built-in Administrator account is disabled by default in Windows 7. However, if no other administrative accounts exist on the system it can be activated. If this is the case, you will see an icon for the administrator on the homescreen mode without failure. Login to the administrator.

  3 If you don't see the icon for the administrator mode safe account, then the built-in Administrator account is always disabled so you will need to work more. If you have a Windows 7 DVD installation (not a recovery DVDs), you can start the system with it. Select the default language, then select "repair your computer". Then select "Command Prompt". At the command prompt, type:

  NET user administrator / Active: Yes [Enter]

  [Note: do not enter the brackets!]

  If you do not have an installation DVD (only have a recovery disk), the computer mftr. may have given you the option to repair the system Windows 7 (not a system recovery!) in the menu diagnosis. This menu of diagnosis is the same one where you can choose Safe Mode.  Or you can make a bootable DVD of Windows 7 repair of the file on this link:

  http://NeoSmart.net/blog/2009/Windows-7-system-repair-discs/

  Note: All the Neosmart recovery disk downloads are torrent files. There is a good explanation of the torrent on the site Web of Neosmart files. You will need a torrent asmuTorrent client to get the files. Torrent client will download the .iso file with which to create the bootable DVD. If you create the bootable DVD in an older operating system, you need third-party burning like Nero, Roxio or free ImgBurn software to burn the .iso image image file, not in the form of data. Windows 7 can burn the .isos natively.

  Now, remove the rescue DVD you made, restart windows system and log into the built-in Administrator account, you enabled.

  4. try a system restore to when things worked. If you can log in to your user account, you are finished. Otherwise, continue to step 5.

  5. the critical files are under % systemdrive%\users\user-account\ntuser. The ntuser.dat file is actually a registry hive. Run Regedit high and select HKEY_USERS and "load hive" in the menu. Now, go to:

  HKEY_LOCAL_MACHINE\SOFTWARE\Microsoft\Windows NT\CurrentVersion\ProfileList

  There is a line for each profile. If a profile is bad, check:

  (a) that the name of the key does not stop in ".bak" (remove .bak If it)
  (b) that the RefCount value is 0 (change it if it is different)
  (c) that the State value is 0 (change if different)

  Make the necessary changes, close Regedit and try to connect as this user.

  6. If that doesn't solve your profile, it is corrupt. When you do that, you should make a new Standard user account and copy your data to it. Do not delete the old account until you have recovered data you need!

  Once everything works, go to the additional administrative account you will be made by the suggestions below and disable the administrator account integrated yet for security reasons:

  Start Orb > Search box > type: cmd
  When cmd appears in the above results, right-click and choose "Run as Administrator" [OK]. Now, you will get the command prompt. At the command prompt, type:

  NET user administrator / active: No. [Enter]

  Exit the command prompt.

  General recommendations for creating users in Windows 7

  You absolutely don't want to have only one user account. Like XP, Vista and all the other modern operating systems, Windows 7 is a multi-user system with integrated system of accounts as default Administrator and comments. These accounts should be left alone because they are part of the structure of the operating system.

  In particular, you do not want account only one user with administrator privileges in Windows 7 because the administrator account integrated (normally only used in emergencies) is disabled by default. If you use as an administrator for your daily work, and this account is corrupt, things will be difficult. It is not impossible to activate the built-in administrator to rescue things, but it can be more work you want to do. Better not to put you in a bad situation at first.

  The user account that is for your daily work must be a Standard user, with the extra administrative user (call it something like 'CompAdmin' or 'Tech' or similar) only it for elevation purposes. As a user Standard is recommended for security reasons and will help protect your computer against infections. After you have created "CompAdmin", connect to it and change your normal user account Standard. Then log on to your regular account.

  If you want to go directly to the desktop and ignore the Welcome screen with the icons of the user accounts, you can do this:

  Start Orb > Search box > type: netplwiz [Enter]
  Click continue (or provide an administrator password) when you are prompted by UAC

  Uncheck "users must enter a user name and password to use this computer". Select a user account to connect automatically by clicking on the account you want to highlight and press OK. Enter the password for this user account (when it exists) when you are prompted. Leave blank if there is no password (null).
  MS - MVP - Elephant Boy computers - don't panic!

• photos of the iphone has continued to migrate to iphoto

  Last week, Comcast switched my e-mail from a POP account on one account of IMAP. This has created a lot of problems with mac mail such permanent total loss of my Inbox. Between visits to the Genius Bar and calls to the technical support of Comcast in order to correctly record my mac mail folders and subfolders, I lost the ability to have pictures taken with my iphone migrate to iphoto. How do I trouble shoot it emits? Thanx

  There are 9 different versions of iPhoto and they run on 10 different versions of the operating system. Tips and tricks for dealing with issues vary depending on the version of iPhoto and the version of the operating system. In order to get help, you need to give as much information as possible. Include things like:

  -What version of iPhoto.

  -What version of the operating system.

  -Details. Full, a description of the problem as you can. For example, if you have a problem with export, then explain by describing how you try to export and so on.

  -History: Is it going hard? Everything has been installed or removed? -Are there any error messages?

  -Have what measures you already tried to solve the problem.

  -Something unusual on configure your? Or how you use iPhoto?

  Anything else you can think of that could help someone understand the problem you have.

• should software apps has continued to be updated if El Capitan is not instauled?

  I have a MBP mid 2010 OS X 10.10.5 and you want to upgrade to El Capitan.  Should / can I continue to update applications like iTunes... ?

  Some applications will continue to get the updates after the Mac OS X version has been replaced, then Yes you continue to get updates iTunes for some time yet and will be able to run the latest version which includes support for the latest iPhone and iPad models.

  Other applications Keynote, Pages, Numbers, iMovie can stop making updates as soon as possible. I am aware that these are always updated to Yosemite.

  A good rule of thumb is that the current operating system (now El Capitan) is of course updates and operating system previous now Yosemite will also get updates for its applications and even that until now the Mavericks will always get updates but the one that precedes that which is Mountain Lion could not.

  According to Apple's site, the latest version of iTunes requires 10.8.5 or more late i.e. Cougar 10.8.5 or later version.

• Acquisitioni continuous data recording

  Hi all

  I have trouble with something really Basic. I am tracking the three channels voltage signals and want to save X current signals (ms) when I want to (if everything goes well without delay caused by Windows). I thought that by creating the structure of the case and inserting a flat sequence I can achieve. Apparently not, I put a value to wait at 5000ms but I don't even have 1 second of data.

  Would appreciate any help

  Oleks

  Oleks,

  Lol as soon as you make this connection with the Boolean value you have more parallel loops.  With this connection the loop of the consumer cannot start until the producer of the loop stops. And it is possible that the queue of liberation before executing the loop of consumer removes data.  If this happens, you will lose all data.

  You don't need to do anything to tell the consumer loop when you want to save. The queue takes care of this for you. Here's how it works: in the producer you only queue data when recording enable boolean is set to True. In the consumer (assuming that you have removed the Boolean wire) the Dequeue has an infinite timeout (default).  So he will wait for the data still appears in the queue.  When he removes the data, it saves the data to the file.  The wait has no useful effect. The way in which you have the program install now, the loop of the consumer will be dequeue exactly one reading, save the file and exit.

  Because you have set the record on 5000 ms time, I guess you usually want to record 5 seconds of data whenever the switch option is set to True.  With the sampling frequency = 10 kHz and samples to read = 1000 you will need to read 50 times to 5 seconds of data.

  There are several ways you can handle this.  One way is to keep track of how many samples you read with one another shift register in the producer. When to activate record changes from False to True, you start counting of samples and sends the data through the queue for the consumer. When you arrive on time or the number of limits of samples, stop the queue.  Only stop the loop of the consumer on the mistake to release the queue.

  This will allow several 'recording sessions' within a single keystroke.  I have no DAQmx so I did not test this.

  Lynn

• Windows Media Player 11 has ceased to record music from its library and won't monitor folders for music, photos or video

  I really like the Media Player 11, and it was very useful for me. However, on my desktop has stopped spontaneously Media Player 11 works properly. He refuses to say that there is in any music to the library, and it will not monitor all folders that I have to say. Whenever I said to monitor a folder, if I click "Ok" in the dialog box and return to the "Display files" dialog box, it displays all records, not even the ones I took. This problem is very frustrating and Media Player is useless until I get this resolved. Any help on this would be greatly appreciated.

  Your media library has probably been corrupted, you can reset it by following the instructions for WMP 11 on XP at http://zachd.com/pss/pss.html#medialibrary . Note the reset of the library will make you lose all the counts to play and possibly ratings too. Tim Baets
  http://www.BM-productions.TK

• Cannot open my other user accounts... Download the message, that the user profile service service has no logon. cvannot loaded user profile

  Having only one administrator user account. All my other user accounts will get the above message. Help, please.

  Hello

  1st thing to try is the system in safe mode restore to before the problem

  http://www.windowsvistauserguide.com/system_restore.htm

  Windows Vista

  Using the F8 method:

  1. Restart your computer.
  2. When the computer starts, you will see your computer hardware are listed. When you see this information begins to tap theF8 key repeatedly until you are presented with theBoot Options Advanced Windows Vista.
  3. Select the Safe Mode option with the arrow keys.
  4. Then press enter on your keyboard to start mode without failure of Vista.
  5. To start Windows, you'll be a typical logon screen. Connect to your computer and Vista goes into safe mode.
  6. Do whatever tasks you need and when you are done, reboot to return to normal mode.

  If that does not solve it read more

  read the tutorial below

  http://www.Vistax64.com/tutorials/130095-user-profile-service-failed-logon-user-profile-cannot-loaded.html

  When you log on a Windows Vista-based or a Windows 7 computer by using a temporary profile, you receive the following error message:

  The user profile Service has not logon. User profile cannot be loaded.

  http://support.Microsoft.com/kb/947215#letmefixit

  Your user profile was not loaded correctly! You have been logged on with a temporary profile.

  http://support.Microsoft.com/kb/947242

  If you tried to log on to Windows and received an error message telling you that your user profile is damaged, you can try to fix it. You will need to create a new profile and then copy the files from the existing to the new profile. You must have at least three user accounts on the computer to perform these operations, including the new account that you created.

  http://Windows.Microsoft.com/en-us/Windows-Vista/fix-a-corrupted-user-profile

• The user profile service has no log on. User profile cannot be loaded

  Windows 7.  I get the message user profile service failed the log on.  User profile cannot be loaded.  I followed the instructions on the link, but it seems not to have worked.  This is the administrator account that gives me the penalty.  Only, I could get by using safe mode.  Help, please! This is a brand new with Windows 7 pre loaded, computer I did hardly anything on this computer to give me a problem like that.

  Thank you!

  Since this is a brand new computer, it would be proactive to test at least the hard disk and RAM to make sure they are good. Fleecy material can cause this problem. Just because the computer is new does not mean that the material cannot fail. Indeed, if the material is going to fail, it will usually do fairly quickly or go for years. If any material is bad, assert your warranty immediately. If the material is good, it would also be advisable to ensure that the computer is free of viruses/malware because the infection can also cause the problem.

  http://www.elephantboycomputers.com/page2.html#Hardware_Tshoot
  http://www.elephantboycomputers.com/page2.html#Removing_Malware

  Otherwise, this error can usually be fixed by following the steps below. All this requires a certain level of computer skills. You know better and that take the machine to a competent local computer tech (not a type of BigComputerStore/GeekSquad place) is the best solution for you.

  1 log on to a different user account with administrative privileges. If you neglected to make an account additional administrative steps 2-3. Otherwise, continue to step 4. See also General information on setting up the accounts of users at the end of this post.

  2 in Mode safe boot. This, by repeatedly pressing the F8 key as the computer starts. That you will get to the menu on the right where you can use your arrow key to select Mode safe [Enter]. The built-in Administrator account is disabled by default in Windows 7. However, if no other administrative accounts exist on the system it can be activated. If this is the case, you will see an icon for the administrator on the homescreen mode without failure. Login to the administrator.

  3 If you don't see the icon for the administrator mode safe account, then the built-in Administrator account is always disabled so you will need to work more. If you have a Windows 7 DVD installation (not a recovery DVDs), you can start the system with it. Select the default language, then select "repair your computer". Then select "Command Prompt". At the command prompt, type:

  NET user administrator / Active: Yes [Enter]

  [Note: do not enter the brackets!]

  If you do not have an installation DVD (only have a recovery disk), the computer mftr. may have given you the option to repair the system Windows 7 (not a system recovery!) in the menu diagnosis. This menu of diagnosis is the same one where you can choose Safe Mode.  Or you can make a bootable DVD of Windows 7 repair of the file on this link:

  http://NeoSmart.net/blog/2009/Windows-7-system-repair-discs/

  Note: All the Neosmart recovery disk downloads are torrent files. There is a good explanation of the torrent on the site Web of Neosmart files. You will need a torrent as muTorrent client to get the files. Torrent client will download the .iso file with which to create the bootable DVD. If you create the bootable DVD in an older operating system, you need third-party burning like Nero, Roxio or free ImgBurn software to burn the .iso image image file, not in the form of data. Windows 7 can burn the .isos natively.

  Now, remove the rescue DVD you made, restart windows system and log into the built-in Administrator account, you enabled.

  4. try a system restore to when things worked. If you can log in to your user account, you are finished. Otherwise, continue to step 5.

  5. the critical files are under % systemdrive%\users\user-account\ntuser. The ntuser.dat file is actually a registry hive. Run Regedit high and select HKEY_USERS and "load hive" in the menu. Now, go to:

  HKEY_LOCAL_MACHINE\SOFTWARE\Microsoft\Windows NT\CurrentVersion\ProfileList

  There is a line for each profile. If a profile is bad, check:

  (a) that the name of the key does not stop in ".bak" (remove .bak If it)
  (b) that the RefCount value is 0 (change it if it is different)
  (c) that the State value is 0 (change if different)

  Make the necessary changes, close Regedit and try to connect as this user.

  6. If that doesn't solve your profile, it is corrupt. When you do that, you should make a new Standard user account and copy your data to it. Do not delete the old account until you have recovered data you need!

  Once everything works, go to the additional administrative account you will be made by the suggestions below and disable the administrator account integrated yet for security reasons:

  Start Orb > Search box > type: cmd
  When cmd appears in the above results, right-click and choose "Run as Administrator" [OK]. Now, you will get the command prompt. At the command prompt, type:

  NET user administrator / active: No. [Enter]

  Exit the command prompt.

  General recommendations for creating users in Windows 7

  You absolutely don't want to have only one user account. Like XP, Vista and all the other modern operating systems, Windows 7 is a multi-user system with integrated system of accounts as default Administrator and comments. These accounts should be left alone because they are part of the structure of the operating system.

  In particular, you do not want account only one user with administrator privileges in Windows 7 because the administrator account integrated (normally only used in emergencies) is disabled by default. If you use as an administrator for your daily work, and this account is corrupt, things will be difficult. It is not impossible to activate the built-in administrator to rescue things, but it can be more work you want to do. Better not to put you in a bad situation at first.

  The user account that is for your daily work must be a Standard user, with the extra administrative user (call it something like 'CompAdmin' or 'Tech' or similar) only it for elevation purposes. As a user Standard is recommended for security reasons and will help protect your computer against infections. After you have created "CompAdmin", connect to it and change your normal user account Standard. Then log on to your regular account.

  If you want to go directly to the desktop and ignore the Welcome screen with the icons of the user accounts, you can do this:

  Start Orb > Search box > type: netplwiz [Enter]
  Click continue (or provide an administrator password) when you are prompted by UAC

  Uncheck "users must enter a user name and password to use this computer". Select a user account to connect automatically by clicking on the account you want to highlight and press OK. Enter the password for this user account (when it exists) when you are prompted. Leave blank if there is no password (null).
  MS - MVP - Elephant Boy computers - don't panic!

• Possible to use Conference presenter AFTER registration (which has not been recorded in presenter)?

  Hello, I have a few recorded lectures (currently in wmv format file, but can be converted), and I wonder if I can use the presenter to produce a finished product that has the video previously saved on one side of the display screen and corresponding powerpoint slides across the display screen?

  I guess it would be possible if I had initially recorded the video directly in the presenter, but this isn't the case.  The recording was made about 20 feet in front of the Grandstand and with the help of a high quality with tie connecting camcorder audio mic.  I am looking for a way to change which will allow me to feed directly into the corresponding powerpoint until the finished product shows the speaker on one side of the screen and powerpoint (separately) on the other side.   I'm not very familiar with the presenter, but I hope that there could be a way to do this, but indirect, it may be. ugges

  Any suggestions are appreciated!

  Thank you!

  Catherine

  Here's the workflow I used:

  I used creating a project and function TPP brought in my slides using the Captivate settings auto-detecte. After the creation of the project I used Edit > Rescale project. I used the value of % to increase the width of the blades project at 150% and then chose to not resize the objects already on the slide, and keept on the left center of the according slides. This gave me an empty area of the slide to the right hand of the slide where I could put the video. Depending on what size you want the video, you can increase the width of a best value for your needs. You can also then Captivate allows you to place objects on the empty part of the slide to dress up the areas where the video and PPT deck are not (I have a pet peeve with blank white areas on presentations). This can be a good opportunity for the image of brand or other information (video title, topic, speaker, etc.).

• Account has been hacked and they change profile information

  I'm having a problem with the security of my account, I had my hacked account.  The person going on my profile to change my date of birth of password and other information.  I have them deleted several times, but they keep hacking on my account.  I changed my password several times.  I downloaded the Microsoft security. When I tried to access my account this morning, they had hacked into and changed my password and the private information on my account.

  For the best response contact the support of society, your account team is with. If it's on a Hotmail account:

  Unfortunately, this forum is not for Hotmail - they have a forum dedicated to issues where you will receive the best assistance. When you start a new thread on their forum, you can copy and paste your question above.

  Hotmail support:

  http://windowslivehelp.com/product.aspx?ProductID=1

  Compromised account - unauthorized account access:

  http://windowslivehelp.com/solution.aspx?SolutionID=6ea0c7b3-1473-4176-b03f-145b951dcb41