Tips for registration then...
I'm shooting a few shows with a grand piano and a pianist. (conditions of studio controlled specifically for the purpose of this record and shoot)
A fiscal year without a budget... then I thought that I throw myself into the universe dark and deep audio and making the record myself.
Audio is very complicated and discouraging for us the cameramen!
I am considering an installation of two micro and I did some research on the placement of microphone. This is not my major concern. I have time in the rehearsal period to get this working as well as possible via my "ear-ometer '.
I own a few reasonable but basic microphones that will do the job by hand.
Two different microphones will be used, and my intention is to get the warm atmosphere of the lower end of the piano with the condenser mic (before CK - 7) and some details own withdraws the high-end with my Sennheisser S e835. (a nice crisp vocal microphone).
The two microphones will be input to the camera through a mixer line and I think I'll take a right channel one and a left on the other channel.
It gives me 2 discrete mono tracks that I need to "mix". I do have stereo.
Please propose and advise a simple technique for mixing the two lanes Audition CS5 or CS3. (I have both)
I don't want the titles to be cancel each other frequencies by what I've done wrong... .or any delay or any resonance issues between tracks.
I am not allowed to "on the process of" audio. Here's the pianist auditions.
My goal is clear, clean and complete audio tone.
I do not have access to the piano until the day of the shooting, and I have to return the project the next day. Then... .no time for tests or experiences. That's why I'm asking here and now.
I appreciate all of the advice given. I hope that its simple.
In a good investment micro stereo, panoramic isn't in it. The signals generated by the pickups will create the sound field correct all on their own.
Maybe I read wrong what Shooternz wants to do, but with a good mixers a lot is the only way to get two separate runs to power the left panoramic camera hard a microphone and the extreme right, feed in to the two inputs on the camera. It is not to be confused with panning in post to mock a stereo field, it's just a form of signal routing.
Bob
Tags: Audition
Similar Questions
-
Photoshop elements on Windows 10 12.0 ask constantly for registration and then nothing happens
PES 12, I installed on a windows 10, the software has been activated on an old computer (only once, so another installation should be possible). When I try to start the program, I get a dialog box asking for registration within 7 days, or that the software will stop working. I follow instructions, use my Adobe ID, accept the terms, and then - nothing happens. I didn't even get an error message. PSE does not start. If I click on it again, the same thing happens. Does anyone have an idea how I can fix this? Please?
Nikolas
Since this is an open forum, not Adobe support... you must contact Adobe personnel to help
Chat/phone: Mon - Fri 05:00-19:00 (US Pacific time) <===> NOTE DAYS AND TIME
Don't forget to stay signed with your Adobe ID before accessing the link below
Serial number and activation support (non - CC)
-
Trying to update from Mozilla, I get the error message following, "the file would be not saved because you do not have the appropriate permissions. Choose another directory for registration.
How to choose another "directory" of record?
Press Alt + E and then N to bring up your preferences. On the general tab, check the option "always ask me where to save files.
-
I have a Creative cloud photography Plan (CC of Photoshop Lightroom). There a serial number for registration? Because I have received no series by mail, but it works well! And he never asks me to activate with a serial number. I just pay monthly Plan.
I ask this question because I have to change the computer and I didn't have trouble disattivate App and put it on the new pc!
Can I turn off just from the creative cloud by disconnection of the account application, uninstall the application and then install on the new pc?
The CC has not need any number of series, it is based on an Adobe ID.
In the case where you are prompted for the serial number then you can refer to.
Concerning
Baudier
-
Y at - it a tip for Undo and Redo to work?
I tried all possible ways to use two fingers to swipe back, but I can't get the cancellation or reinstatement for work on my iPad mini. Does anyone have any tips for this?
The gesture is not easy to use and it is only available for cutting and selection in the content-aware fill then we actually disabled in our 1.0.1 update. We are the reworking in our next release.
If you really want to try, keep your two fingers on the screen and quickly swipe left or right. Keep your fingers too long will turn the pan gesture. I hope this helps.
-
Is it possible to buy a new tip for iPencil?
So far, they are not listed anywhere in the Apple Store. Call the AppleCare and see what they can do for you.
-
The vi below opens a new data file every time new data of the visa arrived. I only want a single file of data for registration period!
Can someone bring me (Labview is new to me) in the right direction?
John
See attached the amendment. I made a change to my suggestions and possess the top-level VI for the null refnum. See if it makes sense.
-
I changed my computer; in the former, I installed Adobe Acrobat 7 Pro. I installed the DVD this software in the new computer, the installed software apply for registration, and it is not possible online or by phone because I get an error message: "Servicio de Activacion not available." I have download the acrobat 7.0 Pro software, following the instructions on the Adobe web site, and I download PPRO_2.0_Ret - NH_ES.zip, but the software has been Adobe Premier Pro, no. Adobe acrobat 7 Pro. How can I use my Adobe Acrobat 7.0 Pro?
-
Oops... .the everything in the title... My apologies!
Tips for Lightroom 6 help indicates again that if "using a graphics card AMD/ATI under Windows 64-bit with the AMD Catalyst driver 15.7 and Lightroom CC/Lightroom 6 hangs or crashes during launch or when you edit an image in the develop module.» This problem may occur when you use AMD Radeon HD 5xxx card graphics series 8xxx running versions of pilot 14.501.1003, 14.502.1014 and 15.200.1062.1004. For the Solution of the page install the AMD Catalyst 15.8 Beta Driver for Windows (posted August 31, 2015). However, there are now a 16.1 driver... would this work with Lightroom 6buttons Photpshop CC without problem or should I stay with 15.8 beta for Windows driver (Windows 8.1.
Thank you very much
Paul Winstone
Hi Paul,.
This article was created when users have faced problem with old drivers for AMD graphics card.
Yes, you can upgrade to the last 16.1 pilots and who should work well however, you should have 1 GB VRAM or more to take advantage of the GPU processors.
Kind regards
Claes
-
I use Adobe Acrobat Pro XI (11.0.08) during execution of "save under" process "Reduced the size of the pdf file" Adobe for awhile then stops completely and needs to close. All started to do that today.
As I had not heard of you, I tried to 'cut' of this folder and pasted into a folder, I called "temptemp" in the same root fodler lacation, (not in the original file). Run the program and it gave me the same error and closed again. Any help now?
-
Some useful tips for photoshop touch?
Anyone have tips for Adobe Photoshop Touch, it's new to me and I'm not 100% with him immediately
Thanks for the reply on my forum
Build-in tutorials should be a good starting point for you.
In addition, you can watch some video tutorials... http://TV.Adobe.com/search/?q=Photoshop+touch&SortBy=relevancy
If you have any questions, this forum is the place to ask. We already have a lot of good information here. For more information, that you don't see here, there is a community of people who can help you
Hope that helps.
-Guido
-
webclient_plugin: Tips for troubleshooting plugin for registration?
I'm building a new plugin for the html bridge with server components and clients.
My plugin records very well, but blank server log does not show. And the plugin itself does not. I am using vcenter 5.5u1
The first time I registered the plugin - I've provided an https url in the extension xml, without the server footprint. It was the only time, I saw a message in the virgo log file mentioning the package download fails. For all other attempts, there was no indication that server virgo is trying to get the package or install it.
I look at the newspaper the following address: var/log/vmware/vsphere-client/logs/vsphere_client_virgo.log. There is no reference to my plugin.
Looking /var/log/vmware/vpx/vpxd.log and eam.log show that my plugin is registered.
Please let me know if there are other ways to solve this.
I tried the following but no progress (virgo journal does not even pick up the package):
(1) verified the zip package structure corresponds to that required (corresponds to the structure shown in the sdk tutorial).
(2) used http (with allowHttp)
(3) use https with server xml.
Between each register/unregister, I restarted the management page webclient service.
Thank you.
Your blank paper should contains log with "HL.test com" messages after the first user logs in (check that you also used this id in the plugin - package.xml)
Also, check what is in the local cache. the plugin package files are developed locally in these places:
- Location of Windows: %PROGRAMFILES%/VMware/vSphere Web Client/vc-packages/vsphere-client-serenity.
- Location of Linux or Mac: / var/lib/vmware/vsphere-client/vc-packages/vsphere-client-serenity.
- Location of Windows: %PROGRAMFILES%/VMware/vSphere Web Client/vc-packages/vsphere-client-serenity.
-
Tips for when your webcam is not detected
EDIT: If you have recently upgraded to Windows 8 and experience this problem, please read this document.
Here are some tips to solve a problem of webcam not detected. I see this question get asked a lot so here are the steps you should take to resolve the problem.
To start, you make sure that the device is detected by Windows. The following instructions are for Windows 7, but should be very similar to Windows Vista and Windows 8.
Option 1: Check Device Manager to make sure that it works correctly.- Right-click the Start button, type "Device Manager" and press ENTER.
- Once charges Device Manager click 'View' then "Show Hidden devices."
- Locate the section "imaging devices".
- Note If you see the webcam here.
- If the webcam is listed, click it and check that it is not 'disabled '.
- If the webcam is listed and disabled, go to Option 2. If the webcam is not listed, you will spend on Option 4.
Option 2: Allow Windows to re - install the device.
- All remaining in the Device Manager, right click on your webcam and select "Uninstall".
- If you are prompted select "remove driver and driver package".
- Restart your laptop and allows Windows to attempt to reinstall the webcam.
- If Windows detects the webcam check the operation of the webcam.
- If Windows does not detect the webcam and install move to Option 3.
Option 3: Manually install the drivers for your webcam.
- This site allows to determine your product/model number.
- Visit the Page of Support HP and use this product number to visit the specific page of your product.
- Go to "Drivers and software" and are looking for the driver for your webcam. NOTE: the drivers for the webcam are sometimes provided with the YouCam software.
- Download and install this driver.
- Restart the PC.
- Check the features.
Option 4: Manually re - detect the hardware.
- Disconnect all external devices.
- Shut down the laptop.
- Remove the battery and AC power.
- Press and hold the power button for 10-15 seconds.
- Reinstall the battery and AC power. Then turn on the laptop.
- Once Windows is loaded back to the Device Manager.
- Selection 'Action' and then 'search for material changes.
- If the Device Manager detects hardware let settle.
- If Device Manager does not detect the see material Option 5.
Option 5: System Restore and system recovery.
It is very well described in this document. Note that all data not saved prior to a recovery will be lost.
6 options: Repair or replacement.
If none of these solutions worked for you, it is likely that you are experiencing a hardware failure. It is possible to replace the webcam or reinstall a loose ribbon cable. However, it is one of most difficult repairs on the laptop. If you want to try this repair, you can visit your laptop support page and go to the section "manuals". There is normally a "maintenance and Service Guide" for laptops, this will cover the disassembly of the laptop. You can then use HP parts Surfer to locate the part for your laptop.If you do not want to attempt a repair yourself you can ask HP about a repair. For customers in the United States / Canada, you can call 1-800-474-6836. If you are not in this region, you need visit the HP Support Site to get contact information for your region.
I hope that everyone considers this information useful!
-
use OPT_ESTIMATE or CARDINALITY tip for correct estimation of nested loops
I'm using Oracle 11.2.0.3. Below the execution below plan, how can I use tip OPT_ESTIMATE or CARDINALITY to teach optimization E-lines for ID 9 (Nested Loop) 30553 instead of 6.
------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------ | Id | Operation | Name | Starts | E-Rows |E-Bytes| Cost (%CPU)| E-Time | A-Rows | A-Time | Buffers | OMem | 1Mem | Used-Mem | ------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------ | 0 | SELECT STATEMENT | | 1 | | | 4604 (100)| | 30553 |00:00:02.56 | 208K| | | | | 1 | SORT ORDER BY | | 1 | 6 | 7044 | 4604 (1)| 00:01:05 | 30553 |00:00:02.56 | 208K| 41M| 2086K| 36M (0)| |* 2 | HASH JOIN OUTER | | 1 | 6 | 7044 | 4603 (1)| 00:01:05 | 30553 |00:00:02.10 | 208K| 38M| 3120K| 39M (0)| |* 3 | HASH JOIN OUTER | | 1 | 6 | 6870 | 4599 (1)| 00:01:05 | 30553 |00:00:01.97 | 208K| 38M| 3120K| 39M (0)| |* 4 | HASH JOIN OUTER | | 1 | 6 | 6744 | 4591 (1)| 00:01:05 | 30553 |00:00:01.85 | 208K| 37M| 3121K| 39M (0)| |* 5 | HASH JOIN OUTER | | 1 | 6 | 6570 | 4584 (1)| 00:01:05 | 30553 |00:00:01.74 | 208K| 37M| 3121K| 38M (0)| |* 6 | HASH JOIN OUTER | | 1 | 6 | 6414 | 4576 (1)| 00:01:05 | 30553 |00:00:01.60 | 208K| 37M| 3121K| 38M (0)| | 7 | NESTED LOOPS | | 1 | | | | | 30553 |00:00:01.44 | 208K| | | | | 8 | NESTED LOOPS | | 1 | 6 | 6318 | 4572 (1)| 00:01:05 | 30553 |00:00:01.31 | 182K| | | | | 9 | NESTED LOOPS | | 1 | 6 | 1830 | 4568 (1)| 00:01:04 | 30553 |00:00:01.11 | 124K| | | | |* 10 | HASH JOIN | | 1 | 2069 | 270K| 2499 (1)| 00:00:35 | 30646 |00:00:00.46 | 23738 | 6539K| 2033K| 7965K (0)| |* 11 | TABLE ACCESS BY INDEX ROWID | DSCLR | 1 | 5079 | 158K| 533 (1)| 00:00:08 | 91395 |00:00:00.28 | 6460 | | | | | 12 | BITMAP CONVERSION TO ROWIDS | | 1 | | | | | 197K|00:00:00.16 | 615 | | | | | 13 | BITMAP AND | | 1 | | | | | 4 |00:00:00.14 | 615 | | | | | 14 | BITMAP OR | | 1 | | | | | 4 |00:00:00.07 | 276 | | | | | 15 | BITMAP CONVERSION FROM ROWIDS| | 1 | | | | | 2 |00:00:00.02 | 69 | | | | |* 16 | INDEX RANGE SCAN | XIF913DSCLR | 1 | 274K| | 14 (0)| 00:00:01 | 68407 |00:00:00.01 | 69 | | | | | 17 | BITMAP CONVERSION FROM ROWIDS| | 1 | | | | | 4 |00:00:00.05 | 207 | | | | |* 18 | INDEX RANGE SCAN | XIF913DSCLR | 1 | 274K| | 42 (0)| 00:00:01 | 209K|00:00:00.03 | 207 | | | | | 19 | BITMAP CONVERSION FROM ROWIDS | | 1 | | | | | 5 |00:00:00.06 | 339 | | | | |* 20 | INDEX RANGE SCAN | XIF910DSCLR | 1 | 274K| | 67 (0)| 00:00:01 | 239K|00:00:00.04 | 339 | | | | | 21 | NESTED LOOPS | | 1 | | | | | 21749 |00:00:00.10 | 17278 | | | | | 22 | NESTED LOOPS | | 1 | 3404 | 339K| 1965 (1)| 00:00:28 | 22772 |00:00:00.03 | 1246 | | | | | 23 | TABLE ACCESS FULL | TMP_RPT_BD_STATE_DATA_DWNLD | 1 | 3255 | 257K| 11 (0)| 00:00:01 | 3255 |00:00:00.01 | 27 | | | | |* 24 | INDEX RANGE SCAN | XIE2OCRN | 3255 | 7 | | 1 (0)| 00:00:01 | 22772 |00:00:00.03 | 1219 | | | | |* 25 | TABLE ACCESS BY INDEX ROWID | OCRN | 22772 | 1 | 21 | 1 (0)| 00:00:01 | 21749 |00:00:00.06 | 16032 | | | | |* 26 | VIEW PUSHED PREDICATE | | 30646 | 1 | 171 | 1 (0)| 00:00:01 | 30553 |00:00:00.63 | 101K| | | | | 27 | WINDOW BUFFER | | 30646 | 1 | 21 | 1 (0)| 00:00:01 | 46946 |00:00:00.59 | 101K| 2048 | 2048 | 2048 (0)| |* 28 | TABLE ACCESS BY INDEX ROWID | DSCLR_FLNG | 30646 | 1 | 21 | 1 (0)| 00:00:01 | 46946 |00:00:00.32 | 101K| | | | |* 29 | INDEX RANGE SCAN | XIE1DSCLR_FLNG | 30646 | 2 | | 1 (0)| 00:00:01 | 46946 |00:00:00.21 | 59862 | | | | |* 30 | INDEX RANGE SCAN | XPKH760_RGLTY_ACTN_DSCLR | 30553 | 1 | | 1 (0)| 00:00:01 | 30553 |00:00:00.18 | 57541 | | | | | 31 | TABLE ACCESS BY INDEX ROWID | H760_RGLTY_ACTN_DSCLR | 30553 | 1 | 748 | 1 (0)| 00:00:01 | 30553 |00:00:00.11 | 26218 | | | | | 32 | TABLE ACCESS FULL | DSCLR_ST_TYPE_TBL | 1 | 4 | 64 | 4 (0)| 00:00:01 | 4 |00:00:00.01 | 5 | | | | | 33 | TABLE ACCESS FULL | RGLTY_RSLTN_TYPE_TBL | 1 | 12 | 312 | 7 (0)| 00:00:01 | 12 |00:00:00.01 | 10 | | | | | 34 | TABLE ACCESS FULL | INTTR_TYPE_TBL | 1 | 14 | 406 | 7 (0)| 00:00:01 | 14 |00:00:00.01 | 10 | | | | | 35 | TABLE ACCESS FULL | SNCTN_TYPE_TBL | 1 | 15 | 315 | 7 (0)| 00:00:01 | 15 |00:00:00.01 | 10 | | | | | 36 | TABLE ACCESS FULL | PRDCT_TYPE_TBL | 1 | 25 | 725 | 4 (0)| 00:00:01 | 25 |00:00:00.01 | 5 | | | | ------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------ Query Block Name / Object Alias (identified by operation id): ------------------------------------------------------------- 1 - SEL$A8B7A3F4 11 - SEL$A8B7A3F4 / D@SEL$13 23 - SEL$A8B7A3F4 / OH@SEL$1 24 - SEL$A8B7A3F4 / O@SEL$13 25 - SEL$A8B7A3F4 / O@SEL$13 26 - SEL$13512960 / DF@SEL$13 27 - SEL$13512960 28 - SEL$13512960 / DF1@SEL$14 29 - SEL$13512960 / DF1@SEL$14 30 - SEL$A8B7A3F4 / H7@SEL$2 31 - SEL$A8B7A3F4 / H7@SEL$2 32 - SEL$A8B7A3F4 / DS@SEL$9 33 - SEL$A8B7A3F4 / RST@SEL$11 34 - SEL$A8B7A3F4 / ITT@SEL$3 35 - SEL$A8B7A3F4 / ST@SEL$5 36 - SEL$A8B7A3F4 / PT@SEL$7 Outline Data ------------- /*+ BEGIN_OUTLINE_DATA IGNORE_OPTIM_EMBEDDED_HINTS OPTIMIZER_FEATURES_ENABLE('11.2.0.3') DB_VERSION('11.2.0.3') OPT_PARAM('optimizer_index_cost_adj' 20) ALL_ROWS OUTLINE_LEAF(@"SEL$13512960") PUSH_PRED(@"SEL$A8B7A3F4" "DF"@"SEL$13" 11) OUTLINE_LEAF(@"SEL$A8B7A3F4") ELIMINATE_JOIN(@"SEL$2D47CDEA" "DTT"@"SEL$13") OUTLINE(@"SEL$14") OUTLINE(@"SEL$A8B7A3F4") ELIMINATE_JOIN(@"SEL$2D47CDEA" "DTT"@"SEL$13") OUTLINE(@"SEL$2D47CDEA") MERGE(@"SEL$3FAACB6D") OUTLINE(@"SEL$15") OUTLINE(@"SEL$3FAACB6D") MERGE(@"SEL$11") MERGE(@"SEL$A1A6E401") OUTLINE(@"SEL$12") OUTLINE(@"SEL$11") OUTLINE(@"SEL$A1A6E401") MERGE(@"SEL$9") MERGE(@"SEL$BFB1842A") OUTLINE(@"SEL$10") OUTLINE(@"SEL$9") OUTLINE(@"SEL$BFB1842A") MERGE(@"SEL$7") MERGE(@"SEL$EEDE2B8C") OUTLINE(@"SEL$8") OUTLINE(@"SEL$7") OUTLINE(@"SEL$EEDE2B8C") MERGE(@"SEL$5") MERGE(@"SEL$A6B38458") OUTLINE(@"SEL$6") OUTLINE(@"SEL$5") OUTLINE(@"SEL$A6B38458") MERGE(@"SEL$171BE69E") MERGE(@"SEL$3") OUTLINE(@"SEL$4") OUTLINE(@"SEL$171BE69E") MERGE(@"SEL$AF02BF1E") OUTLINE(@"SEL$3") OUTLINE(@"SEL$2") OUTLINE(@"SEL$AF02BF1E") MERGE(@"SEL$13") OUTLINE(@"SEL$1") OUTLINE(@"SEL$13") FULL(@"SEL$A8B7A3F4" "OH"@"SEL$1") INDEX(@"SEL$A8B7A3F4" "O"@"SEL$13" ("OCRN"."ORG_PK" "OCRN"."DSCLR_DSCLB_FL" "OCRN"."DSCLR_RPTBL_FL")) BITMAP_TREE(@"SEL$A8B7A3F4" "D"@"SEL$13" AND(OR(1 1 ("DSCLR"."FORM_TYPE_CD") 2 ("DSCLR"."FORM_TYPE_CD")) ("DSCLR"."DSCLR_TYPE_CD"))) NO_ACCESS(@"SEL$A8B7A3F4" "DF"@"SEL$13") INDEX(@"SEL$A8B7A3F4" "H7"@"SEL$2" ("H760_RGLTY_ACTN_DSCLR"."FLNG_PK" "H760_RGLTY_ACTN_DSCLR"."DSCLR_PK" "H760_RGLTY_ACTN_DSCLR"."REC_SEQ_NB")) FULL(@"SEL$A8B7A3F4" "DS"@"SEL$9") FULL(@"SEL$A8B7A3F4" "RST"@"SEL$11") FULL(@"SEL$A8B7A3F4" "ITT"@"SEL$3") FULL(@"SEL$A8B7A3F4" "ST"@"SEL$5") FULL(@"SEL$A8B7A3F4" "PT"@"SEL$7") LEADING(@"SEL$A8B7A3F4" "OH"@"SEL$1" "O"@"SEL$13" "D"@"SEL$13" "DF"@"SEL$13" "H7"@"SEL$2" "DS"@"SEL$9" "RST"@"SEL$11" "ITT"@"SEL$3" "ST"@"SEL$5" "PT"@"SEL$7") USE_NL(@"SEL$A8B7A3F4" "O"@"SEL$13") NLJ_BATCHING(@"SEL$A8B7A3F4" "O"@"SEL$13") USE_HASH(@"SEL$A8B7A3F4" "D"@"SEL$13") USE_NL(@"SEL$A8B7A3F4" "DF"@"SEL$13") USE_NL(@"SEL$A8B7A3F4" "H7"@"SEL$2") NLJ_BATCHING(@"SEL$A8B7A3F4" "H7"@"SEL$2") USE_HASH(@"SEL$A8B7A3F4" "DS"@"SEL$9") USE_HASH(@"SEL$A8B7A3F4" "RST"@"SEL$11") USE_HASH(@"SEL$A8B7A3F4" "ITT"@"SEL$3") USE_HASH(@"SEL$A8B7A3F4" "ST"@"SEL$5") USE_HASH(@"SEL$A8B7A3F4" "PT"@"SEL$7") SWAP_JOIN_INPUTS(@"SEL$A8B7A3F4" "D"@"SEL$13") INDEX_RS_ASC(@"SEL$13512960" "DF1"@"SEL$14" ("DSCLR_FLNG"."DSCLR_PK" "DSCLR_FLNG"."BLLBL_FL")) END_OUTLINE_DATA */This plan gives you an idea of why your initial synchronization has been long - most of your readings are one-piece readings and you have read 53 724 blocks. If you estimate 1 centisecond by read (which could be on a reasonable charge system) then it is 537 seconds. to 5 milliseconds per read, it's still 268 seconds or 4 minutes and 30 seconds.
A quick break down of some (the worst case) potential time - only you can say whether or not some of these readings will be always/often/never being cached in the file or at the SAN level.
Line 11 - physical reads 6 400 done - it's a tree bitmap then the readings are in the order of physical table with no. rereads. Call 5ms by read-online 32 seconds. L
| * 11 | TABLE ACCESS BY INDEX ROWID | DSCLR | 1. 5079. 158K | 533 (1) | 00:00:08 | 91395 | 00:00:01.27 | 6460. 6400 | | | |
The hash join takes us from 6 400 to 11 788 because it joins, lines 21 to 25 (nested loop) in which most of the work is the random access table with some automatic caching: 26 seconds. Do a search here rather than indexed 22 000 access? Which would be faster, which would charge less.
| * 25. TABLE ACCESS BY INDEX ROWID | OCRN | 22050. 1. 21. 1 (0) | 00:00:01 | 21059 | 00:01:04.74 | 15634 | 5280. | | |
Three nested loops that introduce more readings:
11788 9-> 26386:14 600 of the predicate view pushed which some lies but a very large index and a table of random access 73 seconds
8 26386-> 33783:7 400 index line 30 - big clue about 37 seconds Access hides
33783 7-> 53691:19 900 31 table access - large table line, not much caching, 100 seconds.
In each case, you can ask if an analysis would take less time than all of these random reads.
NOTE - all I'm pointing our here where you potentially use a lot of time so that you can ask whether or not you should do little of the query in this way, or if there is an alternative, or if the work you're doing is absolutely necessary. If you want to optimize the query you should consider the intent of the query and think your way through a reasonable join order to see if you can imagine an effective way to get the same data. I have written a few articles and presentation on an approach that begins by drawing - here is a link to an article I wrote for a group of SQL Server: https://www.simple-talk.com/sql/performance/designing-efficient-sql-a-visual-approach/
and a video I did with Kyle Hailey, while he was working for Embarcadero:Tune in for the ultimate SQL Tune-off | Landing pages
Concerning
Jonathan Lewis
-
I'm looking for 'best practices' tips for a configuration of a project (first CS5.5, Windows 7 Pro)
I was instructed to update an old corporate video with narration, sounds, graphics and new music.
Video camera ONLY material that I've had a DVD corporate (NTSC) - the original source material is simply not available. .
I can rip the DVD in MPEG 2 and import it into first without problem, but I would like to be able to use resolutions higher the updated graphics.
I intend to export it to Youtube (HD) but can export to DVD or BluRay as well.
My question really reduced management of sequences. I tell myself that my sequence settings must be the highest resolution, I expect to work with (Youtube HD or Bluray) which allows you to easily export to lower quality, but I don't really know if it's as simple as that. Is there a standard method in the industry? Am I close?
First may actually use the DVD .vob files, just copy DVDs to hard disk, and then import in first.
What is the DVD existing video in a 4:3 or 16:9 format? If 4:3, think about how you will work in a program of 16:9. Rather than having the black terminal on the side bars, many publishers will some sort of background to fill this space. A popular solution is to reproduce a bass track, stretch 4:3 video to fill the screen and add Gaussian blur effects. Because the colors/content of the sidebars will correspond to the main video, it's a little disguises the fact that the video is 4:3.
If you put SD images in a HD program, it will look 'soft' compared to the HD images. As a compromise, you can consider the new edition as 720 p instead of 1080 p program, so that the SD resolution is not to be tense. All the computer video/video YouTube is not interlaced, meaning to sequences and exports should be done as Progressive.
Flow problem of potential work - if you take the images existing SD from the DVD and it high end in a HD sequence, then export to DVD (SD resolution), the video turned into mush. She was raised, and then again once, dowscaled really kill the quality. May be required to copy the HD sequence in a sequence of SD, difficulty of the problems of size / scale of graphics and titles and DVD for the export of the sequence of SD to avoid the top of range/reduce images SD. Note that the DVD-video is highly compressed, so you already work with a weak source material, recompress again will be a hit in quality in all cases, but certainly avoid the top of range/cut again.
I don't have Adobe apps in front of me at the moment, but I think that Blu - ray 720 p export options are limited, perhaps 720 p at 59.94 only, not sure. Which may affect your decision to 1080 p and 720 p.
Hope these tips help you
Thank you
Jeff Pulera
Safe Harbor computers
Maybe you are looking for
-
Satellite X 200-S-Video computer crash
My X 200 started crashing whenever I try to move to the s-video output. Crashes at the same time where I choose "tv" to F5. Worked ok for 2 years. Running Vista Ultimate, Ge Force 8600 m GT. I tried different drivers from nvidia and performed a resto
-
questions about hp4140b driver
Can someone tell me how to install the drivers for hp4140b pA METER/DC VOLTAGE SOURCE? Of many thks dabao
-
desinstalar starforce protection
Hola are the first time that hago esto, Necesito saber como desinstalar starfoce protection UN y quieero hacerlo modo seguro are no tengo experiencia desde is muchas gracias
-
Sony STRDN1030 receiver, connected to the TV using the video components. But no Menu appearing
Just got the new Sony STRDN 1030 and hung to the audio and video. Connected TV using component, because it is an option only with my Panasonic Plasma. But I am unable to get any video same menu to display on the TV. Help, please.
-
I have a sidewinder force feedback pro for windows 98... do you work for Win XP?
I have a sidewinder force feedback pro for windows 98... When I upgraded I can't use it any more (it is 9 pins) so I need the windows xp software... How can I manage it works? Please help me