Tips on Setup with 2 blades of Sun and San

Similar Questions

• Sysprep with Windows 7 x 64 and a KMS key

  Hello world

  Over the next two weeks, I intend to migrate our Windows XP PC to Windows 7 x 64.

  For the past 8 years, that I followed so far our 350 machines, using 9 master image files, sysprep, and Symantec Ghost to display different images. I want to continue to do the same with Windows 7.

  I am aware that there is a new integrated system to achieve similar results in Windows 7, but I prefer to continue to use Sysprep and Symantec Ghost, at least in the short term. With tight time, I don't want to take the risk of problems during a little familiar.

  We have a KMS server to activate Office 2010, Windows 7 and Windows Server 2008 R2 customers after deployment, and it seems to work well.

  However, I have some concerns. I read that Windows 7 limit the number of times that an image can be sysprep where would, in 3, and I have already done once with my first image.

  I got just the BONE earlier this week to 65 machines to get the job of KMS server. There are 25 clients to connect before it has sprung into action. If I only sysprep my image twice more, not worth the hours initially to get setup with all our software school and custom configurations.

  So my questions are:

  The limit of sysprep is still topical in a corporate environment where the software is licensed by an internal KMS server?

  Is there a way to stop the counter locking sysprep by using switches different system for example under the sysprep procedure?  With XP, I use "sysprep-mini - reseal - quiet" and with a file sysprep.ini to answer the configuration questions mini, I can roll with Symantec Ghost images, have machines to configure and stop once done, without leaving my chair. "

  Forgot huge benefits from the ease of creating image embedded on my existing process?

  Help with these questions would be received warmly.

  Regards Mr... D

  Due to the scope of your question, it would be better if you post your question configuration and dedicated Forum for Windows 7 deployment on TechNet.

  Windows 7 installation, Setup, and Deployment Forum

• To convert my Keynote slideshow (09) .mov, I always end up with double blades on slides with sound, a sound and one without the sound. Why? How should I do?

  When trying to convert a Keynote slide show (09) in format .mov, I end up with double blades on slides that have sound. What makes the total video almost twice as long as I wish. How do the conversion with only sound slides appearing and eliminating silent rehearsals?

  You will need to confirm which version of Mac OS, and Keynote, you use as your profile shows very old software that is obsolete and is no longer supported. I assume his keynote address version 4 If you are using Mac G5.

  IV never heard of Keynote, do what you describe in any version, so we need the details of how you have the presentation put in place. If you post a sample file that illustrates this problem on Dropbox I review on my old power Mac.

• How to cut audio tracks with tool blade?

  Hello

  I recently made the switch from fcp7 to fcpx and I'm having a real hard time! There are many things that I can't understand how to do, and it's just one of them:

  Solo Cup audio tracks with the blade tool (or another medium, if there is). Can I cut the audio clips on one side, but how I cut a piece in the middle of the clip?

  Thank you!

  YYou can't cut with the blade tool? Or select it, and press Cmd - B of type point skimmer/reading

• HP 255 G3: I can not enter Setup with administrator password

  I can't get into Setup with administrator password

  When I go into Setup it gives to enter the administrator password. (I forget)

  HP 255 g3

  System disabled: 67365449

  @taoufik

  When asked for the password enter 78043489

  REO

• How do I move the UCS with OS blade on the local disks between chassis

  Hello

  I have to move the blade between chassis - blade have OS installed on local disks and Associates profile.

  I can simply:

  Shutdown

  Enter the maintenance

  remove the chassis

  Exchange with other blades of the second chassis

  power on

  Blade are properly recognised and profile will go with it?

  I found Advisor here it is best to unassign blade profile and partner back after removal:

  https://supportforums.Cisco.com/discussion/11230671/physically-move-Blad...

  but it seems too complex for me - if someone who tired of this exercise can share some experiences?

  See you soon

  Hello

  Assuming the frame belong to the same domain (even pair of fabric for interconnection) and you are using ESXi, try the following:

  1 - Enter the host in maintenance mode (it can be move virtual machines to another server/power them off / take them into so maintenance mode)

  2. cut the blade

  3. ensure that the Service profile does not have a disc of scrub policy so that data is not deleted when the profile Service (SP) is ungrouped

  4 separate the SP

  5 decommissioning of the blade

  6 - Remove the blade and insert the new blade

  7. move the second chassis original blade

  8 - though the blade and an associate of the same/original SP

  9 powers on the blade

  10. take the server out of maintenance mode. as well as virtual machines

  Note: For the blade inserted in the drive, that we released our blade, you can create a new SP and pair with it or you can actually have any MS (including that attributed to the recently released blade) and assign it to the new blade.

  A single SP by sever and that one server per SP.

  SPs are independent from the hardware (as long as the material is compatible with the functions set up by the PS)

  Let me know if this info has helped, if not let me know and I wil expand or try to make your job easier.

  Please note ALL useful answers

  -Kenny

• MSE8000 with 2 blades of supervisor?

  I was invited to do a check of the new potential customer and preliminary information indicates that they have two blades of supervisor in their MSE8000. I will access the system later this week, but I wonder if this is even supported or how a second supervisor would even work with or be able to manage the other cards in the chassis. The former team of Tandberg seen elsewhere or sold/advocated a solution like this in the past?

  THX,

  RF

  Do not think that his support, although he "might work", but it means that you will have two blades followed management and maintenance of media licenses, backups, etc. through all installed blades that could cause problems.  Blades communicate via backplane under Cisco deliberated to try to confirm my blade was defective, I even installed the supervisor in slot 10 front blade ahead and RMA and it ran very well always extract data from the other blade chassis, so it will take place in any location and connect to the bottom of the chassis basket.  The supported method is that the top blade must be installed on the slot 1 of the MSE 8000, and only 1 is installed for a whole chassis MSE.

  I doubt that TANDBERG would have filled two blades of supervisor, you get only one with a MSE 8000.

• Get the error message "error loading DLL communication" when trying to access Wireless Utility Setup with a LexMark impact S305 printer

  Original title: trying to access Wireless Utility Setup with a printer LexMark impact S305 on windows 7, can nybody help me?

  lxeapss: error loading DLL communication, I get this pop-up box several times trying to access Wireless Utility Setup with printer. I have tried, defrag, virus scan (vipre), stop, went to the Lexmark Web site to get the latest software downlaod for printer?

  Hello

  Click on the link below.

  http://support.Lexmark.com/index?page=content&ID=so4452&locale=en&UserLocale=en_US

  Hope this information helps.

• DR Setup with ebs 11i & databases under windows 11.2.0.3

  Hello

  We have requirements of DR Setup with ebs 11i & 11.2.0.3 database under windows 2003 server 32-bit.

  We follow the metalink document

  Business continuity for Oracle E-Business Release 11i using Oracle 11 g Release 2 and versions later

  Physical Standby Database - Single Instance and Oracle RAC (Doc ID 1068913.1()

  But for many windows of missing steps in this document.

  If someone made the related activity in windows.

  Good to want to share documents through my mail ID: [email protected]

  Thanks and greetings

  Villi Kumar

  Hello

  We created the recovery after disaster for 11i ebs in a windows environment.

  Now, we are conducting an application and a database shall also.

  Once we transition from the primary to the standby, day before the application runs with the new URL.

  Therefore, inform our users about the new URL of the application.

  Thank you & best regards

  Villi Kumar

• With Photoshop CS6 on my iMac, I got an error message on the Setup with error # 1. He suggested deleting PS CS6 and then re - install. Idid, reinstall using Time Machine. I will then he sane error message. I recently changed my OS t

  With Photoshop CS6 on my iMac, I got an error message on the Setup with error # 1. He suggested deleting PS CS6 and then re - install. Idid, reinstall using Time Machine. Then, I got the same error message. I recently changed my OS to El Capitan.

  Migration of Mac with Time Machine WILL NOT WORK with the Adobe program activations due to hidden registration files

  Sign out of your account... Uninstall... to run vacuuming...

  -http://helpx.adobe.com/creative-cloud/help/install-apps.html (and uninstall)

  -using the vacuuming after uninstalling and prior to the relocation is necessary

  -https://helpx.adobe.com/creative-suite/kb/cs5-cleaner-tool-installation-problems.html

  -Restart your computer... Sign in to your account... Reinstall

• When you try to install Acrobat 9 Standard to my HD Setup outboard seems stuck on C:\ and I can't move on a disk with enough space for the installation.  What can I do?

  When you try to install Acrobat 9 Standard to my HD Setup outboard seems stuck on C:\ and I can't move on a disk with enough space for the installation.  What can I do?

  You will need a bigger c. For everything that you can move there will be 10 things, you can't. Software installation puts the huge amounts of information in the Windows Installer on C database.

• Can I convert a ppt file to PDF with PDF Pack with two blades to the page?

  I want to convert a ppt file to pdf format with two blades on the page, rather than a slide page. I can do this with a printer. How do I do this with pdf pack?

  Hi sandyd,.

  When you convert PowerPoint to PDF via Adobe PDF Pack, it will convert each slide in the deck to a page in the PDF file. Unfortunately, there is no way to change this.

  Best,

  Sara

• My laptop when turned on only comes up with the name of dell, and stops. Setup and boot menu = f2 = F1

  laptop does not start at the top. After trying menu start, it indicates there is no boot device. I would like to start fees and re install windows xp but I don't have a cd or a disc if I have the product key. Can someone help me clean up my computer and re install windows without the cd, which I hope it will fix the problem

  brick2,
  Thank you for taking the time to post.  You're saying that it sounds as if your hard drive is not detected.  You will need to contact the manufacturer of your PC to help with the possible hardware failure and to get copies of the system restore disk.  There is not a way to install windows without a CD or a recovery partition on your hard drive (which it appears right now that your laptop does not see). Mike - Engineer Support Microsoft Answers
  Visit our Microsoft answers feedback Forum and let us know what you think.

• Easy VPN setup with interface to multiples with the same level of security

  Hello

  I want to configure an ASA 5505 with 7.2 (4) software and dual license ISP and when I configure two interfaces with the level 0 on two security interfaces and enable vpnclient the trace message appear:

  ERROR: Cannot determine the internal and external interfaces Easy VPN remote: multiple interfaces with the same levels of security.

  vpnlclient of configuration above:

  vpnclient Server x.x.x.x where x.x.x.x
  vpnclient mode network-extension-mode
  vpnclient nem-st-autoconnect
  vpnclient TUNNEL_EZVPN_TUNNELSPEC vpngroup password *.
  vpnclient username usr_ezvpn_tunnelspec password *.
  vpnclient enable

  interfaces:

  interface Vlan200
  nameif outside1
  security-level 0
  IP x.x.x.x 255.255.255.252
  !
  interface Vlan300
  nameif outside2
  security-level 1
  IP x.x.x.x 255.255.255.128
  !

  monitor the SLA to the routing:

  monitor SLA 100
  type echo protocol ipIcmpEcho 200.221.2.45 interface outside1
  NUM-package of 5
  frequency 30
  monitor als 100 calendar life never start-time now
  ALS 200 monitor
  type echo protocol ipIcmpEcho 200.154.56.80 interface outside2
  NUM-package of 5
  frequency 30
  Annex monitor SLA 200 life never start-time now
  ALS 300 monitor
  type echo protocol ipIcmpEcho 4.2.2.1 interface outside1
  NUM-package of 5
  frequency 30
  Annex monitor SLA 300 life never start-time now
  ALS 400 monitor
  type echo protocol ipIcmpEcho 200.244.168.149 interface outside1
  NUM-package of 5
  Timeout 3000
  threshold of 3000
  frequency 30
  Annex monitor SLA 400 life never start-time now

  Follow-up:

  !
  track 1 rtr 400 accessibility
  !
  Track 2 rtr 200 accessibility
  !

  routes:

  Route 0.0.0.0 outside1 0.0.0.0 x.x.x.x 100 track 1
  Route 0.0.0.0 outside2 0.0.0.0 x.x.x.x 200 track 2

  The track works normal.

  Kind regards!

  Try using the command "backup interface" on the secondary ISP interface.

  http://www.Cisco.com/en/us/docs/security/ASA/asa72/command/reference/b_72.html#wp1338585

  You need to increase the level of security to 1 for this interface.

  By default, EasyVPN uses the highest level of safety inside and the lowest outside.  Anything between the two must be set manually.  I assume you have an interior vlan defined but not added to the posted config.

• 3Surveiller Setup with Ati cards

  Hi im using cs5 with (3) pp 25 "monitors in eyefinity, I was wondering if someone did that with (3) 30 '' + displayport monitors and whether someone uses the AMD 6970 graphics card?

  There are 2 systems HD 6870 in the PPBM5 reference, ranked 164 and 204. See http://ppbm5.com/DB-PPBM5-2.php