Easy VPN setup with interface to multiples with the same level of security

Similar Questions

• Question about several popular vm with the same kernel version

  So, I have been informed that ESX is smart enough for to run several virtual machines with the exact same kernel that it loads only one instance of the kernel in memory for all of them so that it saves space in RAM. This seems quite remarkable to me, and I'd like to see if VMWare has any white papers or other documents on this. I'd like to believe it's true, but it seems incredible to believe.

  Is this really how ESX functions? If I have 10 XP SP3 machines with the same level and exact same version of the kernel patch, VMWware won't really load only one instance of the core XP in RAM to separate the 10 machines? If he does that, how handles when 10 machines all want access to the same statement in kernel mode at the same time separate?

  Welcoem to the Forums - ESX will actually 10 instances of the core of the customer even if they are the same OS - but once loaded using Transparent Page Sharing the vmkernel (the o/s of the ESX Server) can recognize identical pages and store them a time-read only memory - if the virtual machine tries to write to that page a copy and writing is done - if this new page is another page in memory that one instance is maintained. This saves a TON of memory-

  If you find this or any other answer useful please consider awarding points marking the answer correct or useful

• Help with the easy VPN server with LDAP

  Hello

  I used to be able to set up our easy VPN server with local authentication.

  But now, I'm trying to use LDAP authentication to match with our policies.

  Can someone help me please to check the config and tell me what is wrong with him?

  My router is a Cisco1941/K9.

  Thank you in advance.

  Ryan

  Current configuration: 5128 bytes
  !
  ! Last configuration change at 13:25:16 UTC Tuesday, August 28, 2012, by admin
  ! NVRAM config update at 05:03:14 UTC Monday, August 27, 2012, by admin
  ! NVRAM config update at 05:03:14 UTC Monday, August 27, 2012, by admin
  version 15.2
  horodateurs service debug datetime msec
  Log service timestamps datetime msec
  no password encryption service
  !
  router host name
  !
  boot-start-marker
  boot-end-marker
  !
  !
  !
  AAA new-model
  !
  !
  AAA group ASIA-LDAP ldap server
  Server server1.domain.net
  !
  AAA authentication login ciscocp_vpn_xauth_ml_1 local
  AAA authentication login ASIA-LDAP-AUTHENTIC ldap group ASIA-LDAP
  local VPN_Cisco AAA authorization network
  Group ldap AAA authorization network ASIA-LDAP-ASIA-LDAP group authorization
  !
  !
  !
  !
  !
  AAA - the id of the joint session
  !
  !
  No ipv6 cef
  !
  !
  !
  !
  !
  IP domain name domaine.net
  IP cef
  !
  Authenticated MultiLink bundle-name Panel
  !
  Crypto pki token removal timeout default 0
  !
  Crypto pki trustpoint TP-self-signed-765105936
  enrollment selfsigned
  name of the object cn = IOS - Self - signed - certificate - 765105936
  revocation checking no
  rsakeypair TP-self-signed-765105936
  !
  !
  TP-self-signed-765105936 crypto pki certificate chain
  certificate self-signed 01
  30820229 30820192 A0030201 02020101 300 D 0609 2A 864886 F70D0101 05050030
  2 060355 04031325 494F532D 53656 C 66 2 AND 536967 6E65642D 43657274 30312E30
  69666963 37363531 30353933 36301E17 313230 36323630 39323033 0D 6174652D
  355A170D 2E302C06 1325494F 03550403 32303031 30313030 30303030 5A 303031
  532D 5365 6C662D53 69676E65 642D 4365 72746966 69636174 652 3736 35313035
  06092A 86 4886F70D 01010105 39333630 819F300D 00308189 02818100 0003818D
  C1B7E661 4893D83A EFE44B76 92BAA71A 6375 854 C 88 D 4533E51A 49791 551D8EF7
  F82E2432 E65B401D 27FE4896 2105B38A CB1908C1 9AE2FC19 8A9393C3 1 B 618390
  EE6CB1CC 5C8B8811 04FA198E 16F3297B 6B15F974 13EE4897 97270547 31 74270
  4590ACA6 68606596 97C5D4D5 462CACA0 CDDAC35A 17415302 CFD4E329 8E7E542D
  02030100 01A 35330 03551 D 13 51300F06 0101FF04 05300301 01FF301F 0603551D
  23041830 1680142E FF686472 569BCCF1 552B 1200 1 060355 5B660F30 D35060DB
  1D0E0416 04142EFF 9BCCF155 68647256 2B1200D3 5060DB5B 660F300D 06092 HAS 86
  01010505 00038181 00558F64 05207 D 35 AA4BD086 4579ACF6 BCF6A851 4886F70D
  1D0EA15B 75DBFA45 E01FBA5C 6F827C42 1A50DD11 8922F1E5 3384B8D8 8DD6C222
  0187E501 82C1C557 8AD3445C A4450241 75D771CF 3A6428A6 7E1FC7E5 8B418E65
  74D265DD 06251C7D 6EF39CE9 3 D FE03F795 692763 AE865885 CFF660A5 4C1FF603
  3AF09B1E 243EA5ED 7E4C30B9 3A
  quit smoking
  license udi pid CISCO1941/K9 sn xxxxxxxxxxx

  ISM HW-module 0
  !
  !
  !
  secret admin user name of privilege 15 5 $1 rVI4$ WIP5x6at0b1Vot5LbdlGN.
  ryan privilege 0 0 pass1234 password username
  !
  redundancy
  !
  !
  !
  !
  !
  !
  !
  crypto ISAKMP policy 1
  BA 3des
  preshared authentication
  Group 2
  !
  Configuration group customer isakmp crypto VPN_Group1
  xxxxxxxxxxxx key
  DNS 10.127.8.20
  pool SDM_POOL_1
  ACL 100
  netmask 255.255.255.0
  ISAKMP crypto ciscocp-ike-profile-1 profile
  match of group identity VPN_Group1
  authentication of LDAP-ASIA-AUTHENTIC customer list
  whitelist ISAKMP ASIA-LDAP-authorization of THE
  client configuration address respond
  virtual-model 1
  !
  !
  Crypto ipsec transform-set esp-SHA-ESP-3DES-3des esp-sha-hmac
  !
  Profile of crypto ipsec CiscoCP_Profile1
  game of transformation-ESP-3DES-SHA
  set of isakmp - profile ciscocp-ike-profile-1
  !
  !
  !
  !
  !
  !
  !
  interface Loopback0
  IP 10.127.15.1 255.255.255.0
  !
  the Embedded-Service-Engine0/0 interface
  no ip address
  Shutdown
  !
  interface GigabitEthernet0/0
  IP xxx.xxx.xxx.xxx 255.255.255.224
  automatic duplex
  automatic speed
  !
  interface GigabitEthernet0/1
  IP 10.127.31.26 255.255.255.252
  automatic duplex
  automatic speed
  !
  type of interface virtual-Template1 tunnel
  IP unnumbered Loopback0
  ipv4 ipsec tunnel mode
  Tunnel CiscoCP_Profile1 ipsec protection profile
  !
  local IP SDM_POOL_1 10.127.20.129 pool 10.127.20.254
  IP forward-Protocol ND
  !
  IP http server
  local IP http authentication
  IP http secure server
  IP http timeout policy slowed down 60 life 86400 request 10000
  !
  IP route 0.0.0.0 0.0.0.0 GigabitEthernet0/0
  IP route 10.0.0.0 255.0.0.0 10.127.31.25
  IP route 10.127.20.128 255.255.255.128 GigabitEthernet0/0
  !
  Note access-list 100 category CCP_ACL = 4
  access-list 100 permit ip 10.0.0.0 0.255.255.255 everything
  !
  !
  !
  !
  !
  !
  !
  LDAP attribute-map ASIA-username-map
  user name of card type sAMAccountName
  !
  Server1.domain.NET LDAP server
  IPv4 10.127.8.20
  map attribute username-ASIA-map
  bind authenticates root-dn CN = xxx\, S1234567, OU = Service accounts, OR = Admin, OU = Acc
  DC = domain, DC = net password password1
  base-dn DC = domain, DC = net
  bind authentication-first
  !
  !
  control plan
  !
  !
  !
  Line con 0
  line to 0
  line 2
  no activation-character
  No exec
  preferred no transport
  transport of entry all
  output transport lat pad rlogin lapb - your MOP v120 udptn ssh telnet
  StopBits 1
  line 67
  no activation-character
  No exec
  preferred no transport
  transport of entry all
  output transport lat pad rlogin lapb - your MOP v120 udptn ssh telnet
  StopBits 1
  line vty 0 4
  transport telnet entry
  !
  Scheduler allocate 20000 1000
  end

  Router #.

  Ryan,

  It seems that you are facing the question where it is indicated in the section:

  Problems with the help of "authentication bind first" with user-defined attribute maps:

  * Then you are likely to see a failure in your authentication attempt. You will see the error message "Invalid credentials, result code = 49.  The newspapers will look something like the journals below: *.

  Which is the same error you see. Go ahead and replace in your attribute map and test again.

  If you remove the command "bind-first authentication' configuration above, everything will work correctly.

  https://supportforums.Cisco.com/docs/doc-17780

  Tarik Admani
  * Please note the useful messages *.

• How to open multiple files with the same extension in one program from the Explorer

  I frequently receive several JPG (or whatever extension) files to my clients.  On Windows XP, I could just highlight the files I want to open, and then click Open.  They would be so open to 1 program cascading.  This made it easy when comparing many images.  If I do the same thing in Windows 7, it opens the default program several times and puts 1 image of each open program.  It is Paint Shop Pro in my case.  Thus, instead of so-called images 5 open cascading in Paint Shop Pro... the computer open Paint Shop Pro 5 times with 1 image of each open version of the program.  I tried this search like crazy, but cannot find the right thread for an answer.  Most of the threads are on the opening of the different file types.  My question is only about the opening of multiple files with the same exact file inside 1 free program extension.

  Is this the same version of Paint Shop?

  One thing you might try is to open Paint Shop, then select and drag all the files in this window of the paint shop.  Various programs to manage this type of action differently from the DDE, but it might give you the expected results.

• VPN tunnel between 2 ASA 5505 with the same default gateway

  Hello

  Is it possible to create a vpn ipsec site to site (laboratory environment) between two 5505 (ASA IOS 8.2 (5) & asdm-645-206) with the same default gateway. That is a VPN tunnel or a back to back-to-one site that I have to deploy a router and hang each 5505 out a different interface? We have a lot of public IP but only one gateway our ISP (Internet). Any suggestions or recommendations are very appeciated!

  d

  Yes - you can even do it with a xover cable and a 30 ip on both external interfaces.

• Multiple accounts with the same email

  I have an account I can not connect to after my daughter it has disconnected. I tried to reset the password, but I get an email on my account to other girls: S (same email)
  I guess I have 3 accounts with the same email, but only the latter can created recover!
  Not even my main Skype has a chance

  I'm not 100% sure but it is most likely that I used the same email to whoever I have to reset - what can I do?

  In fact, this morning I managed to log on to the account of an iPad without frills but the pc refuses to sign ^ ^ ^? "Skype cannot connect" - what is happening?
  
  I also discovered that I could connect via a browser, but not via the Skype program... So I uninstalled and installed again and it's working now...
  I've now changed the email so I have 3 accounts with the same email address as Skype seems not to be able to manage multiple accounts with the same email!

• 3070 connectivity problem - multiple Accespoints with the same SSID

  Hi all

  I have a problem with my printer HP Deskjet 3070 printer all-in-one.

  I have 2 accespoints with the same SSID for better coverage of the pit of the wireless home network.

  For some reason any my HP printer keeps losing wireless connection when the 2 accespoints are rising.

  I use a different frequency for the 2 accespoints channel and it works fine with all other wireless devices.

  I did that a DHCP are used, r, but in fact it doesn't matter because the printer uses a static IP (192.168.0.3)

  When the two AP is the printer loses wirelesss connectivity. (The blue led will blink)

  If I take one of the accespoints offline, the printer becomes available.

  Is this a problem on my end or a problem of software/firmware printer?

  Kind regards

  -eth0

  Lol this is not very clear to me?

  But it is very good that we continue here:

  http://h30499.www3.HP.com/T5/printers-DeskJet/3070A-connectivity-issue-multiple-Accespoints-with-the-same-SSID/TD-p/5865699#.UKNyiYatlI1

• Two VPN tunnels on the same device with the same protected networks

  There is a remote site that wants me to put in place two separate tunnels of VPN with the same internal IP at each end. FOR EXAMPLE

  LAN = 10.212.170.201/32, 10.212.170.202/32

  Remote network 192.168.0.0/24 =

  I currently have a tunnel between the above:

  End Point distance = 111.93.152.186

  Local endpoint point = 198.205.115.252

  Now, they want to set up a VPN for the same networks between:

  End Point distance = 115.115.130.34

  Local endpoint point = 198.205.115.252

  It is my understanding that the Cisco ASA 5520 can do. The only way I've seen this done with Cisco hardware is to use two ASAs, but there may be a way to use the costs of road or some other tricks to make it happen.

  I'm open to suggestions.

  Is a backup?

  In, specify endpoint remote second as a "backup" of the peer in the first virtual private network.  Alone will be active at the time - but there are toggled if the VPN in first dies.

• 2 VPN to separate networks with the same intellectual property regime

  We have an office in Bermuda and 2 offices in Chicago. 2 offices in Chicago have the same pattern of IP - 10.150.1.0/24. I would like to set up a VPN site-to site of Bermuda for each of the offices of Chicago. I have one up and it works fine. When I set up the 2nd, I can pass in Chicago, but not receive. I guess it has to do with the same IP networks. Is there a way around this problem?

  Thank you

  Scott

  Yes you need to nat all traffic goes to one of the sights of Chicago. This way others will see it as a completely different subnet. It is a guide of cisco.com:

  http://www.Cisco.com/en/us/products/HW/vpndevc/ps2030/products_configuration_example09186a00808c9950.shtml

• Multiple simultaneous connections to a secure area with the same id/password user

  I was wondering if someone can answer this.

  We are creating a secure member area - there will be 3 area secure, air-conditioned and equipped with identical conent - a (one-time) 3 day trial, monthly subscription (recurring) and annual subscription (recurring).

  The user logs in the generic secure area.

  At this point, we can have multiple simultaneous connections with the same credentials in the secure area user - I was expecting it to be like the administration area where you get hunted if someone else logs into your account.

  Is there a way to limit the number of simultaneous connections with the same ID and password to a secure area (generic)?

  See you soon

  Pat

  This is actually a bug that they re not for awhile. If you connect to another place he should expel you from the other source of security.

• How to prevent multiple objects with the same key being stored?

  Hello
  I use of DPL and I want to know if we have any way of preventing multiple objects with the same primary key is stored in the database or not.
  
  Thank you

  Hello

  Primary keys are unique - there may be multiple objects with the same key. Did you look in the javadoc for the PrimaryIndex and methods put ()?

  -mark

• Multiple images with the same file name no doubt prevent export

  iMac running OS X El Capitan v10.11.6; Photos 1.5

  I'm trying to export approximately 331 images and I get an error report saying that only 169 of the exported images due to the inability to create files for 159 of the images.  Then the report gives me the names of files of the first 100 images for which files were not created.  After looking at many images that would not create a file, I realized that, in any case, there was at least one, if not several, other images with the SAME EXACT FILE name as the image in question.  I can't change the names of files by right click on "info".  I tried to export the images and change the names of files to export using the sequential option and the option of album name - always having exactly the same problem.  I even tried not to export an image at once and change the name of the file individually or no available. Is there a work around that? I desperately need to export those specific images. I am trying to create a photo album for shown to mothers who choose a family with which you want to place their child/ren for adoption. I'm at my wit's end.  The kicker is I'm moving towards trying to export all my pictures, and that's going to be a HUGE problem in course for me, so I really hope that there is a way around this question somewhat simply. I am a hobby photographer and use the computer for businesses and crafts.  I've seen a few posts that included answers referencing "AppleScript" - I have no idea how to do something like that.

  From here on I will DEFINITELY ensure that my Canon continually numbers the names of image files and automatically resets.  For the other photos other than Canon, is possible to rename images during the import of the lot?

  All advice and help will be GREATLY appreciated!

  Finder has the ability to rename files with various models of lot.  Simply select all the files to rename, right-click one of the selected files, choose 'Rename X points... '. ", and then set the options and click on the button"Rename ".

• How can I get rid of BBC iPlayer signals multiple, all with the same content?

  How can I get rid of several BBC iPlayer stream? I have 3 all with the same content.

  This has happened

  Each time Firefox opened

  == I don't know

  See How can I delete a bookmark?

• [.ini files] Get the value of multiple labels with the same name

  Hello!

  In an ini.files, I need to get the value of each tag named in a certain way in a section, but unfortunately, I have 3 or 4 tags with the same name in several sections. I don't know how to retrieve these values, the program always consider that the first tag and not others, I tried to remove each tag after obtaining its values, that he did not.

  Does anyone have an idea to solve the problem?

  Thank you!

  As you can read in my last post, you must read and throw 'x' lines:

  OpenFile)

  Skip lines

  for (i = 0; i< x;="" i++)="" readline="">

  Start reading the useful lines

  ReadLine () / / read a line

  ... / / Interpret the line

  Don't forget to add a control during i/o operations of robust error and to check the end of the file.

• How to import multiple files with the same parameters psd?

  Hi all

  I'm working on a project that requires me to import batches of psd (about 300-400 PSD) files. now when I import PSD files, I have to click all the dialog boxes appearing individually seeking to import the PSD as all merged layers or as sequences.

  now, I have to click 'ok' to all these Photoshop PSD.

  are there not in a way where I can import all Photoshop PSD with the same settings applied to all?

  Thanks in advance for your answers.

  Kind regards

  Unfortunately, the answer is no: one at a time.

  Just curious as to why psd to 300-400?