Tips to improve the converted machines

Similar Questions

• New user - need tips to improve the performance and graphics ability

  Hello

  I am a new user.  I loaded Windows 7 64-bit today, and it seems to work fine. (I used only Explorer.) I downloaded by Reallusion CrazyTalk and software is lagging terribly, and the image is blurry. The Forum of CrazyTalk, they recommend updating graphics drivers to fix blurry images. On the NVIDIA site, when I asked her to automatically detect the driver update, it says none is available for my computer (my Mac).

  Question: They have updates driver for Windows... When I am running Windows via Fusion, should I different graphics drivers than those on my Mac?  If so, means that I need another graphics card?  * Of course I'm not super technical. **

  I have attached a screenshot of my info/display of charts:

  

  In addition, molten, I increased the RAM to 3 GB (3000 MB), but it has not improved the situation.

  CrazyTalk allows the user to make a photo 'talk '... It is lively and contains the audio.  I usually save files as uncompressed reviews that are about 4 GB in size (when I worked directly on a PC) but today to test it's obviously "too much" for this system.  (It would have probably been about 2 GB). So I recorded a MP4 (3.7 MB), which has always been a time loooooooong to save - 30 minutes.

  Other info:

  Model name: iMac

  Model ID: iMac9, 1

  Processor name: Intel Core 2 Duo

  Processor speed: 3.06 GHz

  Number of processors: 1

  Total number of cores: 2

  L2 Cache: 6 MB

  Memory: 4 GB

  Bus speed: 1.07 GHz

  Boot ROM version: IM91.008D.B08

  Version of the SCM (System): 1.37f3

  I would appreciate advice and links to information that will help me.

  Thank you

  Dora

  TatianaTheDog wrote:

  I am a new user.  I loaded Windows 7 64-bit today, and it seems to work fine. (I used only Explorer.) I downloaded by Reallusion CrazyTalk and software is lagging terribly, and the image is blurry. The Forum of CrazyTalk, they recommend updating graphics drivers to fix blurry images. On the NVIDIA site, when I asked her to automatically detect the driver update, it says none is available for my computer (my Mac).

  Welcome to the Fusion community.

  Question: They have updates driver for Windows... When I am running Windows via Fusion, should I different graphics drivers than those on my Mac?  If so, means that I need another graphics card?

  Your don't need another graphics card.  By necessity, VMware can pass through native graphics of your iMac to any guest including Windows operating system.  VMware provides its own graphic adapter of substitute (WDDM 3D) or VMware SVA II, with its own pilots.  Apple takes care to provide you with the latest drivers for OS X, you will never have to download all the drivers directly from the graphics vendors.  Details about the virtual hardware and its differences of capacity are covered in the FAQs on VMware Fusion

  Regarding the VMware graphics drivers who are in the VMware tools and are supported if you have installed Windows 7 using Windows Easy install feature in the new computer Wizard.  If you do not use Windows Easy Install (or don't remember), the icon of blue squares of VMware in the system tray is a Visual indicator, they are installed.  But you can confirm the video adapter by using the Control Panel, search for display > change display settings > advanced settings to look at your graphics card.  For Win7, the default value is VMware SVGA 3D.

  Whenever you want to refresh the VMware drivers you can select Virtual Machine > install VMware Tools to install or run the option repair after the Welcome screen.

  In addition, molten, I increased the RAM to 3 GB (3000 MB), but it has not improved the situation.

  Based on the requirements of CrazyTalk6 system I could find, you do not need to allocate as much RAM (3 GB).  Depending on your other needs Windows 7, 1 GB to 2 GB would be better, based on your host, the RAM size.

  Pentium IV 2 GHz or higher recommended

  512 MB of RAM or more recommended

  1 GB space drive or higher recommended

  Duplex Sound Card/VGA Card/keyboard/mouse/Microphone/Speaker

  Display resolution: 1024 x 768 or higher

  Video memory: 128 MB RAM or higher recommended

  Windows 7 / Vista / XP SP2

  Internet Explorer 6 or higher, Firefox 2 or higher

  DirectX 9 and WMEncoder 9 are required to export WMV

  Recommended hardware:

  CPU dual core or higher recommended

  1 GB of RAM or more recommended

  Hard drive 2 GB or more recommended

  Video memory: 256 MB RAM or higher recommended

  Things to try:

  The 3D Aero interface may impose the virtual graphic adapter, then you could try to disable that by getting the properties of the desktop background, choose Customize and change the theme of Windows 7 Basic.

  More radically, you can stop the virtual machine and disable 3D graphics in the VM > settings > display > uncheck "Accelerate 3D graphics."  This will cause Windows 7 use the legacy VMware SVGA II adapter.  The oldest non - 3D adapter looks like it meets the system requirements but requiring DirectX 9 encoding for WMV exporting.   If you save without video compression, that may be OK.  If the non - 3D adapter does not meet requirements, I am sure that the program will display.

• Tips on improving the graphics for the app for iPhone and iPad

  I'm creating an application for iPad and iPhone 4 and it looks terrible on the iPhone 4.

  I created the Flash file in Flash IDE with Movie CS5.5 size 1024 x 768 and I use the AIR according to the parameters of IOS:

  Rendering: CPU

  Device: iPhone and iPad

  Resolution: high

  All of my graphics are vector, so I assumed that it would be the crisp air on both devices. It is not as perfect as you are looking for on the iPad as it appears on my PC screen, but I can live with that. However, I can't live with the appearance of the iPhone 4.

  So I'm looking for advice on how to improve the appearance of the iPhone 4.

  As far as I know, there isn't a way to use the 2 sets of graphs, one for each device. Please correct me if this is wrong and she would offer me a solution.

  Do all the graphics in PNG would be a solution?

  BTW I use AIR 3.2 SDK if that has to do any and my graphics are static.

  Thanks in advance.

  Nice vectors will look depends on the setting of stage.quality. Try it on medium or high instead of low. In addition, CPU or direct is likely to give more beautiful than GPU vectors only.

• Tips on improving the performance

  Hello

  I have a table that contains data for the last 5 min, maximum (500 lines), this table is in NOLOGGING mode.

  I have another process that get these data every 5 minutes and then remove each row in this table.

  As my table is in NOLOGGING mode I was questioning myself if this better to TRUNCATE the table or DELETE all ranks.

  I did a trace to see the result, but I'm not sure of the conclusion:

  truncate table

  call the query of disc elapsed to cpu count current lines

  ------- ------  -------- ---------- ---------- ---------- ----------  ----------

  Parse        1      0.00       0.00          0          0          0           0

  Run 1 0.00 1.40 12 3 238 0

  Fetch        0      0.00       0.00          0          0          0           0

  ------- ------  -------- ---------- ---------- ---------- ----------  ----------

  Total 2 0.01 1.40 12 3 238 0

  Chess in the library during parsing cache: 1

  Optimizer mode: ALL_ROWS

  The analysis of the user id: SYS

  Elapsed time are waiting on the following events:

  Event waited on times max wait for the Total WHEREAS

  ----------------------------------------   Waited  ----------  ------------

  DB file sequential read 12 0.00 0.00

  ENQ: RO - fast object reuse 3 0.26 0.42

  local writing wait 7 0.50 0.24

  reliable message 1 0.00 0.00

  Journal of synchronization of file 1 0.04 0.04

  SQL * Net message to client 1 0.00 0.00

  SQL * Net client message 1 0.00 0.00

  delete

  call the query of disc elapsed to cpu count current lines

  ------- ------  -------- ---------- ---------- ---------- ----------  ----------

  Parse        1      0.00       0.00          0          0          0           0

  Run 1 0.00 129 263 566 134 0.12

  Fetch        0      0.00       0.00          0          0          0           0

  ------- ------  -------- ---------- ---------- ---------- ----------  ----------

  Total 2 0.00 0.12 129 263 566 134

  Chess in the library during parsing cache: 1

  Optimizer mode: ALL_ROWS

  The analysis of the user id: SYS

  Caught plan statistics number: 1

  Ranks (1) operation of line Source lines (avg) lines (max)

  ---------- ---------- ----------  ---------------------------------------------------

  0 0 0 ASH_DATA DELETE (cr = 263 pr = 129 pw = time 0 = 125014 en)

  134 134 134 TABLE ACCESS FULL ASH_DATA (cr = 263 pr = 129 pw = time 0 = 2738 US cost = 37243 size = card 6420 = 321)

  Elapsed time are waiting on the following events:

  Event waited on times max wait for the Total WHEREAS

  ----------------------------------------   Waited  ----------  ------------

  db file scattered read 17 0.11 0.11

  SQL * Net message to client 1 0.00 0.00

  SQL * Net client message 1 0.00 0.00

  Thank you

  Cyrille

  @rp0428 I have no control over this, if you have a suggestion, I'm very open minded

  , Thanks for the STORAGEclause of RE-USE, I'll have a look.

  The button Delete and truncate made with about 130 lines each, at the exit, it seems that the truncation is longer but consumes less resources.

  Ask yourself that question 'control transaction' is a more important than potential problem on.

  I followed the basic rule is: if it ain't broke, don't fix it.

  You have not posted ANY reason to believe that you still have a problem.

  Until you really have a problem to choose a solution and move.

  As it has already menntioned AND TRONQUER LOADING/RELOADING operations

  1. is evolutionary movement

  2 are performing travel as the amount of data increases

  3. use fewer resources (undo, redo, memory) as the amount of data increases

  The above is particularly true for the use case that can benefit from the RE-USE of STORAGE clause such as batch jobs which tend to use about the same amount of tablespace.

• Converter Standalone fail to start the virtual machine

  Hi there I hope some can help me.

  New on all VM stuff so sorry if I do not clear.

  I installed and configure esxi 4.0 and VM created machines without problem - but I'm doing a conversaion p2v, I go through the steps ends after 1 h or - then when I then try to run the converted machine, it hangs on an icon of the cursor (see attachment)

  boot or anything... can't help you - I'm hot coloning my machine I use winxp to create a virtual copy of my machine.

  Thank you help would be great

  Thanks for your time

  Seems like a problem with the bootloader?

  You have several OS installed on your PC?

  Try also with the old version of the converter (http://www.vmware.com/download/converter/download.html).

  André

• How to improve the materialized view Refresh speed?

  Hello
  
  
  Are there tips to improve the speed of refresh of the materialized views?
  All documentation or advice are appreciated!
  
  Thank you!

  Agree with S_Lindenmayr, if possible, the fast refresh should be used to speed up the update because it syncs MV with only the changes since the previous update (instead of the refresh). To implement the Fatst update, fortunately, with 10 g +, Oracle provides a counselor with the TUNE_MVIEW procedure. Step by step to find in week 12 of the Top 20 features the famous Arup Nanda 10 g for the series of DBA http://www.oracle.com/technology/pub/articles/10gdba/week12_10gdba.html

  Tarraf

• Tips to remember when using the state machine in queue

  I was able to work through the convert my architecture of State Machine for a BAU, thus eliminating the use of nodes of property/local variables to send data values to my machine of the State, but rather to send through queues.

  I would like some advice/tips on taking to serve perfectly. Especially, "is not to make" things with queues and how to effectively release a queue, etc.. What is the convention when using queues? Thank you!

  V

  
  

• Tips for improving of LR2 to 3 during the passage to a new computer?

  My old mac was a G5 so I finally joined the modern world with a new iMac. On the new machine, I installed LR3, but I'm still running LR2 on the old machine. I want to come all my photos/catalogs/dbs (probably by getting an external HD enclosure to the current unit of the old machine) to the new machine and LR2. A few tips on how to import everything? Nothing to watch? I have thousands of images, some of them paid employment, and I don't want to lose anything. Thank you.

  Rule # 1: IMPORTEZ not!

  That's what I'd do:

  • On the old machine and LR2, make sure that you have one (or a few) top level for all your images folders, and that they show in a hierarchical way in your folder Panel. You may need to use "Add a folder" several times to achieve.
  • With the old disk mounted on the new machine, double-click the LR2 catalog to start LR3
  • You will be asked if you want to convert your LR2 catalog in a catalog in LR3
  • Confirm this action, which will build a new catalog of your catalog of LR2 LR3, leaving the LR2 catalog because it is
  • If your missing files/images (that I'm not sure on a Mac when the same volume is mounted as an external drive), perform a 'find the missing folder' on all the top-level folders in your catalog, pointing to the files on the mounted volume
  • If needed/wanted, you can then move the folders from top level of image of in LR to another volume
  • If you need/want to move the catalog as well, copy the file ".lrcat [nomcatalogue]" and "[nomcatalogue] Previews.lrdata" folder to another drive when LR is closed and restart LR by double-clicking the copied .lrcat file
  • Delete the old catalog, once that you do not know the new works to your satisfaction

  You can also consider to copy your presets, plugins and the failings of the cab from the old machine to the new one.

  Beat

• Firefox started running slow about 3 Mbit/s on the same machine that is running to about 6 Mbps, reinstalled firefox twice, but no improvement.

  I have a mini-tower with windows OS computer using the Firefox browser, it started to run slowly, 3Mbps, while on the same machine using for example the download speed is about 6 Mbps, which is what I used to get with Firefox. Oddly enough, I have another machine a net book with Linux OS and Firefox browser and who always gets a good speed to about 6 Mbps, which seems to point to the windows version of Firefox being the problem. I tried twice to reinstall Firefox, but there is no improvement, recently, there has been a couple of updates for Firefox and would like to know is possible to go back to an older version to see if that solves the problem.

  I was so sure that I could be that the problem was with the combination of f-secure, windows vista and Firefox. The O.S. I can not change, Firefox I won't change if f-secure has drawn the short straw. Fortunately, I don't have a long contract with f-secure, I so uninstalled and moved, replacement works very well, too short life.

• Convert the virtual machine to another pc, but... Operating system not found?

  I use VMWare converter to convert a PC Esxi Esxi (on IBM X3650M4) comments, when to start guest VM of the PS, it displays "Operating system not found", there is no hard drive computer virtual on the BIOS of the virtual machine, what happened?

  So your source host where this virtual machine was originally executed is ESXi 5.0, is?

  Please right click on your VM, go on "Change settings" and also view this screenshot and/or join the VM's vmx file here please.

  What is the guest in this virtual machine operating system?

• popular error; An error occurred when opening a virtual disk. Make sure that the converter server and source running machines have network access to the ESX/ESXi hosts source and destination.

  Once again; same problem, others have encountered but nothing seems to work.

  An error occurred when opening a virtual disk. Make sure that the converter server and source running machines have network access to the ESX/ESXi hosts source and destination.

  We have 1 physical servers, we need to see. Here is the environment. All 3 separated location, 3 all firewall separated

  1 physical servers

  -Internal IP address; 172.16.160.21
  -FARM Firewall

  vCenter Server

  -Internal IP address; 172.16.1.85

  -Local Office (ALX)

  Location of destination (ESXi host):

  -Internal IP address; 172.16.153.20

  -Firewall ROOMMATE

  
  Already completed:

  VMware KB: disable SSL on VMware Converter Standalone 5.x encryption   SSL disabled in converter-worker

  Firewall are open / Tunnel is open throughout the environment.

  I have attached the logs.

  Thank you very much

  POCEH; Thanks for the reply. But I wouldn't be pulling my gray hair if I knew what the problem was. I understand that there not for the peer but why...?

• Converter does not have "an error occurred when opening a virtual disk. Verify that the Converter server and source running machines have network access to the ESX/ESXi hosts source and destination. »

  Hi all

  I'm having some trouble converting server physical windows using autonomous vConverter 5.5.

  error message:

  "An error occurred when opening a virtual disk. Verify that the Converter server and source running machines have network access to the ESX/ESXi hosts source and destination. "

  I have attached the bundle newspapers. Please notify.

  See you soon...

  Your error is:

  2014-11 - 04T 18: 27:27.587 - 08:00 [01236 info "Default"] GetManagedDiskName: Get disklib file name as vpxa-nfcssl: / / [a0110-vmgt70-001] WIN-MOVRCVCSITG/WIN-MOVRCVCSITG.vmdk@a0110tesxhyp01.datacenter.telenorservices.com: 902! 2 b 52 87 75 03 03 ff 49-67 2f 3 a 61 76 and 00 cd e1

  2014-11 - 04T 18: 27:27.587 - 08:00 [01236 WARNING 'Default'] [, 0] NfcNewAuthdConnectionEx [NFC ERROR]: unable to connect to peer. Error: Failed to search for host for a0110tesxhyp01.datacenter.telenorservices.com server address: the requested name is valid, but no data of the requested type was found

  2014-11 - 04T 18: 27:27.587 - 08:00 [01236 info "Default"] Sysimgbase_DiskLib_OpenWithPassPhrase failed with 'NBD_ERR_NETWORK_CONNECT' (error code: 2338)

  Check the manual on the required ports.

  HTH

• "Error: failed to get the IP address of the destination virtual machine running the converter to assistance server." with a static IP address

  Hi all

  I'm trying to p2v linux 6.4. It fails with the following message is displayed:

  Error: Cannot get the IP address of the virtual destination machine running the converter assistance server.

  I have seen discussions on this message, but they all refer to dynamic IP address, taken from DHCP, as in my case, I use static IP address.

  In the meantime the p2v (which then breaks down...) I open console support machine and saw a message:

  
  

  eth0 is not a recognized interface.

  Can someone tell me what is happening?

  Hello

  I assume you are using converter 5.5. There is a new feature that allows the selection of the network card. However, it works well in the case of Linux P2V. If you have changed the type of adapter, use 'e1000' or 'auto' and try again.

  HTH

  Plamen

• Converts to the virtual machine non-destructive?

  Hi all

  as securities suggestsi want to convert a working in a machine Server virtual to run in fusion so I can tinker with it, but the original physical server has to continue to operate after the conversion process complete a quantity.

  This will be the case?

  Hello and welcome to the communities.

  Yes, an agent will be installed on the physical system, but otherwise there will be no change for her. You often have to tinker with the virtual machine to clean any old material agents and etc, but the source will be relatively unchanged.

  Good luck!

• No network on the virtual machine after the use of converter

  I was running a basic vm (WinXP) on an esxi4.1 host running short of disk space.

  So I ran the vCenter Converter Standalone client to copy the original VM on a new - the only thing that I changed the size of the disc thin provisioned avaiable.   The copy/convert seemed to work your.

  I started in the new virtual machine, and it came exactly as the old one (with the largest disk).

  ... but the network on the works of more than vm.

  I can still use vSphere to connect to the esxi server and bring up the VM console (which tells me that the network the server works very well).  When I look at the configuration of the virtual machine, it looks exactly like the old (complete with a network powered).   But on the virtual machine, I can't even ping the router, much less get to the dhcp server.

  I even went so far as to stop the virtual machine, remove the network card, restart the virtual machine (if the network has been removed from the virtual machine), stop the virtual machine again, add a NEW network adapter.

  Still the problem remains.  The virtual machine has a network card - but has no network.

  A few thoughts:

  You use a managed physical switch? If so, check if the MAC address of the VM is seen on one of the uplink ports.

  The network management and the virtual machine using the same IP subnet? You could probably try (if possible) is to create an another vSwitch and attach the XP VM to it to see if there is a problem with the virtual machine and the management on the same vSwitch network.

  André