Tips to load the Turbo tax program?

Similar Questions

• Could not load the turbo tax software & this message "the EncodePointer point procedure entry is not found in the dynamic library KERNELL32.dll.

  Original title: while loading turbo tax software & this message. The procedure entry point EncodePointer be found in the dynamic library KERNELL32.dll.     can someone tell me how to solve this problem?

  I have windows xp 2002 Service Pack 2

  Hi henryjeshom,

  ·         Did you do changes on the computer before the show?

  Follow these methods.

  Method 1: Uninstall and reinstall the application of Turbo tax.

  How to change or remove a program in Windows XP

  http://support.Microsoft.com/kb/307895

  Method 2: Perform a clean boot to see if there is a conflict of software like the clean boot helps eliminate software conflicts.

  How to configure Windows XP to start in a "clean boot" State

  http://support.Microsoft.com/kb/310353

  Note: After completing the steps in the clean boot troubleshooting, follow the section How to configure Windows to use a Normal startup state of the link to return the computer to a Normal startupmode.

  After the clean boot used to resolve the problem, you can follow these steps to configure Windows XP to start normally.

  (a) click Start, run.

  (b) type msconfigand click OK.

  (c) the System Configuration Utility dialog box appears.

  (d) click the general tab, click Normal startup - load all services and device drivers and then click OK.

  (e) when you are prompted, click on restart to restart the computer.

  If the problem persists, contact support for Turbo tax for more help and information.

  http://TurboTax.Intuit.com/support/

• "I tried to load a Turbo Tax 2011 program and and the error message came up to the top -" D; "-is not a valid win32 application".

  "I tried to load a Turbo Tax 2011 program and and the error message came up to the top -" D; "-is not a valid win32 application".  In D, I got the TurboTax 2011 loading program. Can you help me fix this problem? E-mail address is removed from the privacy *.

  Split of: http://answers.microsoft.com/en-us/windows/forum/windows_xp-windows_install/win-32-file-missingwindows-xp/ee455a05-8e32-4353-9ab6-656f2cbd222d

  Pete,

  If you right-click "My computer" and select 'Properties', under the general tab, you should see your version of Windows XP... That said your current pack service is?

• I installed the Turbo tax, but it gave me an error "C:\windows\system32\regvrs32" is not found. How can I solve this problem.

  Windows XP how edition

  read this link, it may be useful

  http://support.Microsoft.com/kb/q249873

  also try to run the installer of TurboTax in administrator mode.

  How old is your turbo tax program, it is perhaps not compatible with windows 7.

  If it helps, please mark my post as helpful.

  Thanks and good luck.

• Using windows XP: whed download afthe the beginning of download Turbo tax program an error message appears saying "user lacks administrative privileges to perform the task"need help"

  I bought a turbo tax download and during the download of the process I ge an error message (1321) saying ' windows install has sufficient privileges to install or change the file. "

  Hello

  1. have you logged as administrator?

  2 are you able to install other programs?

  I suggest to follow the steps in the following article and check if it helps.

  http://TurboTax.Intuit.com/support/IQ/install-product/error-1321--Installer-doesn-t-have-permission/SLN12336.html

  If you are always faced with the question, then I recommend you contact Turbo tax support for more help.

  http://TurboTax.Intuit.com/support/

  Hope this helps

• Cannot load 2013 Turbo tax software on Win 7 Home

  Tried to load Turbo Tax 13 on my desk! Currently have 3 more years of tax system, disc starts low load then

  wonder if I want to install .net Framework 4.0! I press Yes, then go ahead, then error [not able to download]. and then

  message says I want to continue with the installation? When I continue I'm left with is an icon and no program! I have

  Microsoft contacted and they sent me a link with some patch, installed service packs 2, did not always help my problem! and it my system is always looking for .net framework 4.0 has tried to download this site, would be low no load! Help!

  The Microsoft .NET Framework allows software developers to create applications quickly, efficiently and with less clutter code «»

  Rather than require a software engineer to write code program from scratch, he or she may simply use the existing features in the .NET Framework. Read about .NET Framework on Wikipedia.

  • TurboTax 2013, 2012 TurboTax and TurboTax 2011 use the .NET Framework version 4, which may or may not already be installed on your system.
    • During the installation, TurboTax 2012 and TurboTax 2011 will also install version 4 if necessary.
    • Any computer running an operating system of Windows 8 at the updated address should already have the version 4.5, which includes version 4 in it.
    • You can also download and install version 4 yourself by going to www.microsoft.com/download/en/details.aspx?id=24872

  Troubleshooting and repair of problems with Microsoft .NET Framework

  The Microsoft .NET Framework allows software developers to create applications quickly, efficiently and with less clutter code «» More information

  Like TurboTax for Windows relies heavily on the .NET Framework, it is crucial that the .NET Framework files on your computer are up to date and functional.

  TurboTax for Windows 2011 and later requires Microsoft .NET Framework 4.0 or 4.5.

  • Windows 7 and Vista already have .NET 4.0 installed, automatic updates.
  • Windows 8 has .NET installed 4.5, automatic updates.
  • Windows XP peut have .NET Framework 4.0 installed. You can find out by opening the Control Panel by double-clicking on Add / Remove Programs. If you do not, TurboTax will attempt to install it with the program.

  Troubleshooting/repair

  If you encounter errors or other problems with .NET, the first thing you want to do is to download and run the Microsoft .NET Framework repair tool.

  If this doesn't solve your problem, run the System File Checker. Then, open Control Panel and choose the files and programs (or Add / Remove Programs XP), locate the .NET Framework 4, double-click it, and then choose repair.

  If all goes well, that should take care of things. Otherwise, visit Microsoft employees and experts .NET WebLog of Aaron Stebner , and carefully (we can not stress enough!) follow his instructions to download and run the .NET Framework cleanup tool. When you are finished, download and install .NET Framework 4, Microsoft site.

• Cannot open the turbo tax/parameter incorrect

  Downloaded turbo tax 2011 and prepared a return... I click on turbo tax 2011 and it says incorrect parameter... cant help access.please

  Hello

  (1) don't you make changes to the computer until the problem occurred?

  (2) what is the exact error message do you get?

  I suggest you to see link below and check if it helps.

  Method 1: Troubleshoot installation and execution of TurboTax (Windows)
  http://TurboTax.Intuit.com/support/IQ/install-product/Troubleshoot-installing-and-running-TurboTax--Windows-/GEN12454.html

  TurboTax for Windows does not open:
  http://TurboTax.Intuit.com/support/IQ/can-not-access-or-find/TurboTax-fails-to-open--Windows-/SLN12251.html

  Method 2: If the problem persists then  I suggest to uninstall and reinstall the program and check if it helps.

  http://support.Microsoft.com/kb/307895

  You can also get in touch with support of Intuit for further assistance.
  http://TurboTax.Intuit.com/support/

  Hope this information is useful.

• Cannot install updates kb982168, kb2756918, kb2789643 and now the updates for other programs say there is an error (fail), (as the turbo tax)

  This has happened after that the volume of messages C is dirty, rebooted now what is happening

  I would recommend that you manually download the update from the Microsoft Download Center. Search the Download Center for the KB number or download your update from the following links:
  MS13-004: Description of the update of security for .NET Framework 3.0 Service Pack 2 on Windows XP and Windows Server 2003: 8 January 2013 (KB2756918)
  MS13-015: Description of the update of security for .NET Framework 2.0 Service Pack 2 on Windows XP and Windows Server 2003: 12 February 2013 (KB2789643)
  Description of the update rollup for the .NET Framework 3.5 Service Pack 1 on Windows XP and Windows Server 2003 (976765, 980773 and 976769): June 8, 2010 (KB982168)
  Once you have the downloaded update file, run the executable with administrator privileges to avoid any permission to hiccup.
  Recommended if you can't always install the update, the next steps are to reset the Windows Update components or an update of the file downloaded a new attempt after performing a clean boot or boot without failure. A clean boot or Mode environment safe is important to ensure that there are no other programs that may be locking files or otherwise interfere with the upgrade process.

  How to reset the Windows Update components?

  How to configure Windows XP to start in a "clean boot" State

  Start your computer in safe mode

• Error "Unable to load the locale of \Program Files\Western Digital SmartWare\Locale files" when right-clicking on any file

  Original title:

  When right click on any file I get message saying unable to load locale files... .WD smartware closing or something simular message. Help, please

  Hello

  1. are you using a Western Digital external hard drive?

  2. where are these files be found?

  3 did you changes to the computer, before the show?

  Method 1:

  Step 1: Safe Mode

  Start your computer in safe mode and check the number.

  Start your computer in safe mode

  http://Windows.Microsoft.com/en-us/Windows7/start-your-computer-in-safe-mode

  Step 2: Clean boot

  If you are not facing the problem in safe mode, and then put your computer in a clean boot and search for the question.

  How to troubleshoot a problem by performing a clean boot in Windows Vista or in Windows 7

  http://support.Microsoft.com/kb/929135

  Note: Once you are done with the boot, follow step 7 of article to reset your computer to normal startup.

  See the following if you are using a Western Digital HDD.

  Method 2:

  Step 1: Disconnect the external hard drive.

  Step 2: Uninstall Western Digital Smartware and check.

  Uninstall or change a program

  Method 3:

  Download and install the latest version of Western Digital Smartware

  http://www.wdc.com/wdproducts/wdsmartwareupdate/

• accidentally changed my file association for utorrent and now not loading the game and programs and browsers

  I accidentally changed something in my computer that shuts down my computer to open all the files, I can't even open the Microsoft Fit it online because when I go to install it, I get a pop up window asking me what program I want to run with, but none of the programs offered in the window will work to open the program file. I remember a couple of days ago I have has download a torrent file and one open pop-up window and asked me what program I wanted to associate this file type, I clicked on the option of utorrent, now none of my games, movies or programs run, when I click on them and try to open them I get the same pop-up box asking what application I want to use to open the program with.
  am beyond frustration with this, I even uninstalled my UTorrent program hoping that would solve the problem, but no luck, the game/files/movies and browsers does not start without changing the file to open with something that is not available in the list of the programs listed.,.

  I would be really grateful for the help in reassociating my files for the games will be automatically start as before.

  Thanks in advance
  Susan Nykolyshyn

  Hello
  What happens, when you try to open any program?
  I suggest you try the following methods.
  Method 1:
  When you run an .exe on a Windows XP, Windows Vista or Windows 7 computer file, the file can start another program
  http://support.Microsoft.com/kb/950505
  Method 2:
  You can restore the system to a system restore point when the computer was working fine.
  What is system restore?

  http://Windows.Microsoft.com/en-us/Windows-Vista/what-is-system-restore

• 2010 turbo tax does not open after the download.

  Just downloaded 2010 Turbo tax and it will not open. Whenever I have it try gives an error message indicating "met Turbo tax an erroe and needs to close"

  Hi billyboy_888,

  1. When you able to install turbo tax 2010 successfully?

  2. do you receive the error message when you try to install or launch turbo tax 2010?

  3. did you of recent changes on the computer?

  Check and make sure that your computer meets the system requirements to install turbo tax 2010.

  TurboTax 2010 system requirements

  http://TurboTax.Intuit.com/support/IQ/install-product/TurboTax-2010-system-requirements/GEN12939.html

  See also the below section of the Turbo tax site and check if it helps.

  Troubleshoot installation and execution of TurboTax (Windows)

  http://TurboTax.Intuit.com/support/IQ/install-product/Troubleshoot-installing-and-running-TurboTax--Windows-/GEN12454.html

   

  For additional support post your query in the Intuit community.

  https://TtlC.Intuit.com/categories/category_page/4

• How to copy documents digitized on-screen in turbo tax

  I've never used a brouse copy and paste how to do this

  Hello, Judy,.

  You want to import the document into the Turbo Tax software:

  Import in Turbo Tax:

  How to import?

  Choose from the list below for more information:

  • Import into TurboTax Desktop
  • Import into TurboTax Online
  • Import data from QuickBooks into TurboTax business
  • Import data from ItsDeductible in TurboTax
  http://TurboTax.Intuit.com/support/IQ/getting-started/frequently-asked-questions-about-TurboTax-for-iPad/GEN81003.html#transfer
   
  How to copy, cut and paste for beginners:
  http://Lifehacker.com/5801525/help-new-PC-users-learn-how-to-copy-cut-and-paste

  You can, but then the information contained in your tax return can match is no longer the original data source. This can lead to confusion on the road, for example if you are audited and recall why the entered information are different from the original.

  Rather than change the imported information, it is usually best to update the information in your program financial before the import.

  If you have already imported, you can re-import the data once you have updated in your financial program (be sure to select the option replace when prompted).

• Turbo Tax 2015

  Information about Turbo Tax 2015 on the App Store said that it is compatible with The Turbo Tax site says OSX10.9 OSX10.8 or higher is necessary. Which is correct? Someone has it tried with OSX10.8? I can improve my OS, but I can start my taxes earlier if I need to.

  PCattie,

  Read the following TurboTax FAQ for more information:

  1. https://ttlc.intuit.com/questions/1899173-minimum-system-requirements-for-turbot ax-mac-software

  2. 5-on-mac-os-x-10-7-or-10-8 https://ttlc.intuit.com/questions/2920594-what-happens-if-i-install-turbotax-201

  

• Get the 123 error trying to load Turbo Tax Deluxe 2010

  When you try to load Turbo Tax Deluxe 2010 I get ERROR 123. It does not load. My computer is a home edition of Windows XP 32 bit OS. My computer is about 4 years old. Also when I try to open my TT files in previous years, none will open. Something has changed between to March 2009 (my last tax file) and now to prevent the execution of TT. TT says that Microsoft is working the problem. I tried the potential solution of TT of the 35 .NET file and it still does not work. I tried to fix and also uninstall and reinstall .NET file but no help. Someone at - he found a solution?

  When you try to load Turbo Tax Deluxe 2010 I get ERROR 123. It does not load. My computer is a home edition of Windows XP 32 bit OS. My computer is about 4 years old. Also when I try to open my TT files in previous years, none will open. Something has changed between to March 2009 (my last tax file) and now to prevent the execution of TT. TT says that Microsoft is working the problem. I tried the potential solution of TT of the 35 .NET file and it still does not work. I tried to fix and also uninstall and reinstall .NET file but no help. Someone at - he found a solution?

  I have installed TT 2010 yet, but my TT 2009 file opens fine and I have the .NET Framework 1.0, 1.1, 2.0 versions service Pack2, 3.0 SP2 and 3.5 sp1 installed.

  You're more likely to get help from the community of TT here, but you'll be more likely to get help if explain you:

  (a) description of the 'problem' Intuit Microsoft Works supposedly on

  (b) Intuit 'solution of the 35 files .NET', and

  (c) the steps you took to fix, uninstall and reinstall "the .NET file."

• After I loaded Turbo Tax 2011, after that I connect to my PC, I get a blank screen with only the cursor showing. I am on Windows Vista.

  After I loaded Turbo Tax 2011, after that I connect to my PC, I get a blank screen with only the cursor showing. I picked up at an earlier date and reloaded the software TT 3 times with the same result. I tried of caraa start windows Explorer by using the Task Manager, but it does not work.

  Hi AndyCantore,

  Follow these steps:

  Step 1: Start the computer in safe mode and check if the problem persists.

  Start your computer in safe mode

  http://Windows.Microsoft.com/en-us/Windows-Vista/start-your-computer-in-safe-mode

  Step 2: If the problem does not persist in safe mode, perform a clean boot to see if there is a software conflict as the clean boot helps eliminate software conflicts.

  Note: After completing the steps in the clean boot troubleshooting, follow the link step 7 to return the computer to a Normal startupmode.