Titles Panel is doing strange things

Similar Questions

• Satellite L series - keyboard does strange things

  My keyboard is made of strange things, but only online, including email. Capital letters will insert randomly, spaces appear when not intended.

  Interestingly, it does not these things as I type on this site. Here is a sample made what he did: "my tell CLA doing hings... sTanrget. »

  My computer repair shop indicates if a keyboard goes wrong, it will go wrong in applications and not only one, but I only happen when online, most often on the enamel.

  If anyone else has experienced this?
  Download new BIOS Toshiba has failed due to a compatibility issue with Windows 7.

  Also I tried to download a driver of keyboard updated without success.

  Thanks for the tips.

  > My computer repair shop says that, if a keyboard is going bad, it would go bad in all applications and not only one, but > I feel only happen when online, most often on the enamel.

  I agree that if keyboard would be defective, the issue should be the help of other applications or the publishers.

  Have you tried to use a different e-mail application to test this behavior strange keyboard?
  Do this!

  In addition you can connect an external USB keyboard functionality as part of your email application.

• Satellite L50 - C Keboard doing strange things

  Hi all

  I have a new L50 Satellite and the keyboard is made of strange things, I get random capital put into words as I type, which means that even now, I'll have to go back and good things otherwise I'm tyYing like that, sometimes the capitals are on constantly regardless of if the caps lock is on and I have to select shift caps lock or shift to get lower-case letters. It is intermittent and sometimes it is worse than the others, I thought, it might be something to do with now the SHIFT key for too long, but it seems to make no difference, I disabled the option keys to sticky etc, but no luck so far.

  It also interferes with me by selecting things on a screen, for example I can't do an Excel sheet spread as the cell is selected, as I am bound to SHIFT or ctrl down permanently, and if I click the cell next to him, it selects that too.

  Any ideas?

  TIA.

  Sounds like a keyboard problem. There is a spillage?
  You may need to send to an ASP for repair.

• I ran a quick check on my office and found all kinds of strange things, including my name seems to be in Chinese (?)

  Original title: unknown

  I have for some time had Windows Live Essentials 2011 on my desktop. I couldn't for a while get on Messenger or mail and believe that the two have been compromised by a hacker (?). Whenever I try to communicate with a friend on the list it will immediately power off. If I try to open messenger of the taskbar, the same thing happens. I ran a quick check on my office and found all kinds of strange things, including my name seems to be in Chinese (?) Can someone tell me please how to get rid of this mess, so that I can use messenger again? I found an address of sorts, something that I mentioned, it is not encrypted. Please help me out here if you can. Thank you very much.

  Hello

  I suggest you to report any problems with windows live product in windows live support team.
  http://windowslivehelp.com/

  You can try the steps below to restore the default windows display language.

  Step 1: Select to see the only fonts TrueType in the programs on my computer option.

  Reference:
  To display only TrueType fonts
  http://www.Microsoft.com/resources/documentation/Windows/XP/all/proddocs/en-us/windows_fonts_truetype.mspx?mfr=true

  Step 2: Change the theme and check.

  Here's how:
  1. right click on an empty space on the desktop and then click Properties.
  2. on the themes tab, select a different theme.

• strange thing after disabling network under ManageConnection and range to lose

  Hi, I noticed a strange thing and I was wondering if anyone of you know maybe why.

  Here's the thing:

  I am connected to the server using Socket. all the 5 sec, I'm sending to the server a frame just to check if I am always connected. If I can't send it - that means that I'm disconnected - an error or I've lost scope (range-not sure what word should I use). and after that, I add a function that doesn't close the connection and streams (in fact if the connection is broken, the secureConnection (which I use) has to close, but I'm not sure about this, so that I added this function).

  try{
  
   _secureConnection.close();
   _dataOutputStream.close();
   _dataInputStream.close();
  
  }catch(Exception e){}
  

  the first question:

  and now, I wanted to write reconnect() function. for this I need to simulate the loss of earnings. so after I connect to the server-i go to the network ManageConnections and disable. and everything should be good, my program does not stop, cause after the disconnection() function, I write an alert, so that I do not know that the close() methods are made. the problem is on the server. He still sees me as I am logged in for a few minutes!

  Why is this?

  the second question:

  I have a place where mobile lose their range a few minutes. I put my blackberry (8800), while running my application (application that particularly send screenshots, but also you can send key on the phone by www - so you can fly the aircraft). I left the phone for about 10 minutes and played with the mobile using the interface on the www and it expected to loose range. but the thing is what happened, it was that the phone rebooted itself! It happens two times - why is - this? is it possible that he was losing the range, sending screen and participation in keys and it was too much for the device so that it self rebooted?

  Kind regards

  This is how works the TCP. The server can detect the BlackBerry-side of the TCP connection is closed that when it receives the corresponding TCP packet, or when the server detects that the connection has been inactive for too long. If your BlackBerry sends the TCP packet (for example, because the radio is turned off), then the server does not know that your BlackBerry think the side of the connection is closed.

  The above is obviously simplified, as in most cases (direct TCP, BES, BIS-B) endpoint of the TCP connection is not BlackBerry, but by a server on the network (carrier, BES/BIS) on behalf of BlackBerry, but the idea is the same: If this server does not know that the BlackBerry think the connection must be closed, the connection remains open.

  P.S. If you send and receive messages from pulse on a TCP from the BlackBerry connection, then in most cases you will detect that the connection is closed only during playback of the connection (for example, an exception IOException or when nothing were received for a while).

• The strange thing is that, when you go and try to remap the drive, it shows that the drive letter is mapped to a different drive used to be shared on the server?

  I am running Windows 7 Pro 64-bit in a dish netwrok with no announcement. I can map drives on the server without any problems and everything seems fine. Then after a few hours it seems to lose the mapping on the drive. There are two mapping drives and he loses a. It will show in my computer as being mapped, but you cannot access it. You can connect to the mapped drive on bringing the command run and typing in the UNC path in.

  The strange thing is that, when you go and try to remap the drive, it shows that the drive letter is mapped to a different drive used to be shared on the server? Once you tell to remap things in car are fine for a few hours.

  My question is where and why it does this?

  Thoughts?

  Thank you

  Tom

  Hello

  The question you posted would be better suited to the TechNet community. Please visit the link below to find a community that will provide the support you want.

  http://social.technet.Microsoft.com/forums/en/category/w7itpro/

  Hope this information is useful.

• Satellite Pro M50 is doing weird things perpetually

  Hello

  I come to you in a State of defeat, I have in my care at the present time a friends Satellite Pro M50, Model No.: PSM55E-003001EN, who does BIZARRE things perpetually, I tried to diagnose for a few weeks and am still absolutely perplexed.

  When started after a period of time (for example, be left overnight), the computer turns on, the rotation of the fan disc to the top, but nothing comes on the screen, it is completely blank. If you turn it off and turn back on again immediately, after that it will start and 'messages' as usual. The reason for this is a mystery to me, because it is only a problem the first time that you turn it on after a while to be turned off, then it disappears.

  Secondly, when it does not start XP, half the time that it will work fine until the screen is touched (tilted forward or backward), which either will make return empty (but always backlit), or BSOD. The other half of the time, it will start in XP, but after a few moments enclosing or suffer the cutting issue screen without being hit at all. I also tried connected to an external monitor, where the output seems to have the same behavior as the computer screen (on off the moment when you off/white/frozen etc.).

  Now, I have re-installed times mulitple XP on the computer, and (outside), it will work perfectly well in a base state being moved and tilted in all directions, I can think of trying, until I have install the ATI display driver recommended from the Web from Toshiba or legacy ATI site When the problems about screen clipping and booting into the operating system seem to start...

  I also tried to install a distribution of Ubuntu on the machine, which works properly again for awhile once installation is complete, until the machine is turned off and left overnight, the next day, wherever he hangs at startup 'Ubuntu' screen and does not start despite any number of reboots.

  I ran Memtest and it indicates that the RAM is fine, and the HARD drive was also tested and is in working condition. Now, this does not seem to point me in the direction of a flaw with the graphics chip, but I don't know if it would force the latter to expose ALL of the behaviors that shows this machine...

  Someone at - it advice about these issues? Given the age of the machine and taking into account the cost of a new phone of base, I don't think that it is worth my friend spend money on fixing the thing, I try right here save the dump.

  Thank you.

  I can't say with certainty what the problem but, as Akuma have already written, there must be a hardware problem.
  What you can do about it? You can try to find it on eBay or elsewhere mainboard handed to nine and exchange it in the hope that everything will be OK. Otherwise you can give advice to your friend to save money and buy new laptops.

• Why my computer is doing every thing appear side dowen?

  Why my computer is doing every thing appear side dowen?

  If Ctrl + Alt + up or down does not work try:

  CTRL + Alty and (F1... F12 keys).

• When I click on Power Options in the Control Panel, it does not. How can I cope?

  When I click on Power Options in the Control Panel, it does not.   How can I cope?

  When I click on Power Options in the Control Panel, it does not.   How can I cope?

  Make a check of the system files. It's to look for corrupt files. He will try to fix it if it is found.

  http://www.Vistax64.com/tutorials/66978-system-files-SFC-command.html

  Question:

  Was there a time when the Power Options in the control panel was admissible?

  If Yes, how long?

  Would it be too long to do a system restore?

  System Restore requires you to choose a date where you did not have this problem as the restore point.

  You remember such a date?

  How the system restore...

  http://www.howtogeek.com/HOWTO/Windows-Vista/using-Windows-Vista-system-restore/

• need help, there is a strange thing to pix!

  the diagram please see www.ciscofan.com/smbc.jpg

  now the router of the ebs has a NM-1CE1U & NM-30DM, then remote clients can dial in to the network, the router of the pboc has a wic - 2T module, connect to the remote site via ebs DDN.the ip address of the pix interface is x.x.45.2, the ebs, the ip address of the ethernet router is x.x.45.1, and the ip address of the remote client can get (the pool of ip addresses) is the ip address x.x.45.110-x.x.45.140.the of pix515E inside the interface is x.x.44.1.I using nat 0 0 0 to avoid any nat (image the pix as the router) then the strange thing happens, after configuration, router ebs, can not ping any address which is like x.x.44.x, after x.x.45.1 ping server1, then both dialer clients and the ebs router can ping Server1, but cannot ping server2, after x.x.45.1 (router ebs) ping server2 , the two Dialer clinets and ebs the router can average ping server2, etc.that computers inside must ping computers outside first, then the external computers can access (include ping) inside is server.and the thing even stanger, if there is any traffic between ebs and the remote client (or the router of the ebs) in some time (maybe a few hours, but I'm not sure) remote dialer clients or ebs router cannot ping (access) inside

  Servers.for instance, after one night, in the morning, customers remote dialer or ebs router cannot ping x.x.44.x.It seems there is a configuration of Time out, but how can I set it up?

  What follows is the pix (515e) configuration:

  PIX Version 6.1 (4)

  ethernet0 nameif outside security0

  nameif ethernet1 inside the security100

  nameif ethernet2 security10 intf2

  nameif ethernet3 intf3 security15

  nameif ethernet4 ebs security20

  nameif ethernet5 pboc security25

  activate n5vL encrypted password

  passwd 2KFQnencrypted

  pixfirewall hostname

  fixup protocol ftp 21

  fixup protocol http 80

  fixup protocol h323 1720

  fixup protocol rsh 514

  fixup protocol rtsp 554

  fixup protocol smtp 25

  fixup protocol sqlnet 1521

  fixup protocol sip 5060

  fixup protocol 2000 skinny

  names of

  pager lines 24

  Automatic stop of interface ethernet0

  Auto interface ethernet1

  Automatic stop of interface ethernet2

  Automatic stop of interface ethernet3

  Auto interface ethernet4

  Auto ethernet5 interface

  Outside 1500 MTU

  Within 1500 MTU

  intf2 MTU 1500

  intf3 MTU 1500

  MTU 1500 ebs

  PBoC MTU 1500

  external IP 127.0.0.1 address 255.0.0.0

  IP address x.x.44.1 255.255.255.0 inside

  IP address intf2 129.0.0.1 255.255.255.0

  intf3 IP address 127.0.0.1 255.255.255.255

  IP address ebs x.x.. 45.2 255.255.255.0

  IP address x.x.46.2 255.255.255.0 pboc

  alarm action IP verification of information

  alarm action attack IP audit

  no failover

  failover timeout 0:00:00

  failover poll 15

  failover outside 0.0.0.0 ip address

  IP Failover inside 0.0.0.0

  failover ip address 0.0.0.0 intf3

  failover ip address 0.0.0.0 ebs

  failover ip address 0.0.0.0 pboc

  history of PDM activate

  ARP timeout 14400

  NAT (inside) 0 0.0.0.0 0.0.0.0 0 0

  allow icmp a conduit

  allow ip a conduit

  Route the pboc 10.24.15.0 255.255.255.0 x.x.46.1 1

  Timeout xlate 03:00

  Timeout conn 0 half-closed 01:00:10: 00 udp 0:02:00 CPP 0: h323 from 10:00 0:05:00 TR

  p 0:30:00 sip_media 0:02:00

  Timeout, uauth 0:05:00 absolute

  GANYMEDE + Protocol Ganymede + AAA-server

  RADIUS Protocol RADIUS AAA server

  No snmp server location

  No snmp Server contact

  SNMP-Server Community public

  No trap to activate snmp Server

  enable floodguard

  No sysopt route dnat

  You have no static command to create the static translation slots. Thus, you need outbound to create temporary translation locations, but these are not permanent, you will have problems.

  public static x.x.44.0 (Interior, exterior) x.x.44.0 netmask 255.255.255.0

  You must bring happiness

• Strange thing happening with ASA and RDP by filtered VPN

  Hello

  I'm hoping to get support here anymore as I am clearly out of options.

  I have 3 ASA 5505 2 and a 5510

  all of them are connected via the internet by VPN

  a 5505 is on my principles and I use VPN to serve 2 other sites that belong to the same customer. Clearly, I want to go the VPN will aswell to localities other than traffic from them.

  the strange thing is if I put an IP address a whole on the acl filter can I use RDP, for when I apply the filter, where I activate TCP/3389, I get an error that the server is not found.

  in forestry, I see the package hit the ACL:

  
  <167>:Jul 05 21:13:19 CEDT: %ASA-session-7-106102: access-list VPN_Filter permitted tcp for user '' User-Lan/192.168.1.87(58603) -> XS4ALL/172.31.2.12(3389) hit-cnt 1 first hit [0xbe2548e2, 0x0]
  <166>:Jul 05 21:13:19 CEDT: %ASA-session-6-302013: Built outbound TCP connection 43436 for XS4ALL:172.31.2.12/3389 (172.31.2.12/3389) to User-Lan:192.168.1.87/58603 (192.168.1.87/58603)
  
  VPN filter:
  access-list VPN_Filter extended permit ip any any log debugging inactive
  access-list VPN_Filter extended permit object RDP object-group DM_INLINE_NETWORK_8 object Lan-Pat
  access-list VPN_Filter extended permit udp object-group DM_INLINE_NETWORK_4 object Lan-Pat eq tftp
  access-list VPN_Filter extended permit icmp object-group DM_INLINE_NETWORK_1 object Lan-Pat log debugging
  access-list VPN_Filter extended permit tcp object-group DM_INLINE_NETWORK_3 object Lan-Pat eq www
  access-list VPN_Filter extended permit tcp object-group DM_INLINE_NETWORK_5 object Lan-Pat eq https
  access-list VPN_Filter extended permit tcp object-group DM_INLINE_NETWORK_6 object Lan-Pat object-group DM_INLINE_TCP_1
  access-list VPN_Filter extended deny ip any any log debugging
  
  any help will be greatly appreciated!
  			 
  If do you a RDP from your PC to the client session, port TCP/3389 is used on the client side and not on your side. So your ACL should be the following:
  VPN_Filter list extended access permitted tcp 172.31.2.0 255.255.255.0 eq 3389 192.168.1.0 255.255.255.0
  Remember: in a VPN-filter is the syntax = remote destination, local = source. Port 3389 is on the remote end.
  --
  Don't stop once you have upgraded your network! Improve the world by lending money to low-income workers:
  
      http://www.Kiva.org/invitedBy/karsteni
  		   

• Sony Vaio SVE14112FXP. A few days ago the integrated webcam doesn't work. The strange thing is that it is not recognized by the administrator of the material, not even as an unknown device

  Hello

  I have a Sony Vaio SVE14112FXP. A few days ago the integrated webcam doesn't work. The strange thing is that it is not recognized by the administrator of the material, not even as an unknown device. I uninstalled and installed Arcsoft Webcam Suite, which has drivers, but nothing new.
  It seems that the built-in webcam is not connected.
  Thank you

  See Sony support site or their forum, this is a Sony webcam

  And no this isn't a feature of device, or something that should appear in the devices & Printers

• When I try to get on the stick of msn games, it tells me to try re launch my browser every time. Also does the thing same om poker.

  When I try to get on the stick of msn games, it tells me to try re launch my browser every time.  Also does the thing same om poker.

  Hello

  1. what web browser is installed in the computer?

  2 the actors that this problem occurs with all games online?

  If you use Internet explorer, I suggest you to see link and check.

  The problems of games online using Internet Explorer

  http://support.Microsoft.com/kb/2528246

  WARNING: Reset Internet Explorer settings can reset security settings or privacy settings that you have added to the list of Trusted Sites. Reset the Internet Explorer settings can also reset parental control settings. We recommend that you note these sites before you use the reset Internet Explorer settings

• New document opens in the layers panel, but does not appear in the workspace

  new document opens in the layers panel, but does not appear in the workspace

  Could you please reset the Photoshop preferences once.

  Preference file functions, names, places | Photoshop CC 2014

• Are there other ways to make more than 1 kaycode instead of doing one thing to switch-case

  OK, naked with me, because my English is not so good. And I'm still not a professional have

  I did a dance game. A game that objects will fly up to the target and you must press the right keys for them. I know this is kind of the issue on several keypress thing. But I tried to search on them. I still can't understand. And... because I'm almost done my project, but the abovemultiple-keys -How-to-do- it, I might have to recreate everything, start from 0.

  I made a function to put on screen the CSM and managed by a class.

  Then, I made a function to detect if the target hit to the right position and you press the right keys.

  Also, if you press the wrong score will be decressed.

  I "did not only a fuction detect keys and tell what to do.

  So my question is "Is there other ways to make more than 1 kaycode instead of doing one thing to switch-case, for example?"

  It is a part of my code.

  var p1:Number=37;// 37Left(Left)
  ///
  
  function makeLvl(e:Event):void
  {
            if (sTime < sTempo)
            {
                 
                      sTime++;
            }
            else
            {
          
                      sTime = 0;
                      if (SelectedLvl[sArrow] != 0)
                      {
                                var currentArrow:MovieClip;//this will hold the current arrow
                                if (SelectedLvl[sArrow] == 1)
                                {
                                          //place a left arrow onto the stage
                                          currentArrow = new A1();
                                          //set the _x value of the arrow so that it is in the
                                          //right place to touch the receptor
                                          currentArrow.x = 120;
                                          //set the arrow's y coordinate off of the stage
                                          //so that the user can't see it when it appears
                                          currentArrow.y = 400;
                                          currentArrow.arrowCode = p1 ;
                                          addChild(currentArrow);//add it to stage
                                }
  ////
  
  
  
  touchL = false;
  
  ////
  
  for (var i:int = 0; i<numChildren; i++)
            {
                      var target:Object = getChildAt(i);
                      if (target.arrowCode != null && target.hitTestObject(mcReceptor))
                      {//if the object is an arrow and the receptor is touching it
                                if (target.arrowCode == p1)
                                {//if left arrow
                                          touchL = true;
                                }
  mcTxt.txtScore.text = 'Score:  ' + score;
            mcTxt.txtCombo.text = 'Combo:  ' + combo;
            mcTxt.txtScoreString.text = scoreString;
  }
  ////
  stage.addEventListener(KeyboardEvent.KEY_DOWN, checkKeys);
  function checkKeys(e:KeyboardEvent):void
  {
            //if the left key is down and no left arrows are touching the receptor
            if (e.keyCode == p1 && ! touchL)
            {
                      changeHealth(-10);//make the health go down
                      combo = 0;
                      scoreString = 'Bad';
            }
  beginCode();
  ////
  
  
  
  

  I try to put a table and display the number to fit it in, but no luck.

  Maybe I used the wrong table?

  Any ideas? Any suggestions? -Please...

  Thank you so much.

  This may be more advanced than what you're ready for, but it is a way to do

  http://blog.Iconara.NET/2008/03/30/separating-event-handling-from-event-filtering/

  I actually did this with a 'chain of responsibility', where each link has a reminder of determineResponsibility and the handleResponsibility callback. If it does not have responsibility (because she is not responsible), it sends the request on the following link in the chain, which manages or does not work. If you are not familiar with a reminder, it is a variable of type function so that you can change what the function is called repeatedly.

  To clarify, you must provide the first link in the chain, a reference to the event, then call something like a method process() with a reference to the event. This would call determineResponsibility(), which would look at the event to see if the features of the event are what you want. If it returns true, it would be called handleResponsibility(). If it returns false, you would call process() on the following link. The advantage of this design is that you can add and delete links to manage the changing needs of your system. For example, if the character hits something that disables the good movement until the user presses the arrow to the left, remove the link to the right arrow until the user presses the left arrow, then turn on again.

  Post edited by: Amy Blankenship