Satellite L50 - C Keboard doing strange things

Similar Questions

• Satellite L series - keyboard does strange things

  My keyboard is made of strange things, but only online, including email. Capital letters will insert randomly, spaces appear when not intended.

  Interestingly, it does not these things as I type on this site. Here is a sample made what he did: "my tell CLA doing hings... sTanrget. »

  My computer repair shop indicates if a keyboard goes wrong, it will go wrong in applications and not only one, but I only happen when online, most often on the enamel.

  If anyone else has experienced this?
  Download new BIOS Toshiba has failed due to a compatibility issue with Windows 7.

  Also I tried to download a driver of keyboard updated without success.

  Thanks for the tips.

  > My computer repair shop says that, if a keyboard is going bad, it would go bad in all applications and not only one, but > I feel only happen when online, most often on the enamel.

  I agree that if keyboard would be defective, the issue should be the help of other applications or the publishers.

  Have you tried to use a different e-mail application to test this behavior strange keyboard?
  Do this!

  In addition you can connect an external USB keyboard functionality as part of your email application.

• Satellite L50-A-160 does not start after the Bios Update

  Hi, first of all, this is first post.

  I have 2 satellite L50-A-160 with bios 1.1

  Problem: seems to go to sleep after a few minutes, even working on them (even with both)

  So, I found an updated version 1.9, downloaded and running on one of the laptops. the biosupdate tool found matching the BIOS and a race.
  In the middle of flashing, he fell asleep. turned on and not start. What can I do? Recovery options? I guess the same thing will happen with the other too...

  What is the problem with these computers?

  Besides; very poor battery, always shows 0% available and not charging...
  Does anyone have a solution?

  Best regards
  -always in the hope.
  GT

  Have you tried to change in Power Options?

  See screenshot and try to change the ones I marked (it can refresh the settings, just change the values) and see if this solves the problem.

  

  and for the other laptop with no boot, a laptop sleep by updating the bios will surely mess it.

  what I don't understand is why your sleep laptop BIOS update, as far as I know the sleep settings is active then on windows (since this is controlled by windows)
  He does not sleep while in the BIOS you leave 1 year, sleep settings active only after loading windows.

  have you tried to check the time of processor for your laptop? Maybe its overheating causing auto-off

• Satellite Pro M50 is doing weird things perpetually

  Hello

  I come to you in a State of defeat, I have in my care at the present time a friends Satellite Pro M50, Model No.: PSM55E-003001EN, who does BIZARRE things perpetually, I tried to diagnose for a few weeks and am still absolutely perplexed.

  When started after a period of time (for example, be left overnight), the computer turns on, the rotation of the fan disc to the top, but nothing comes on the screen, it is completely blank. If you turn it off and turn back on again immediately, after that it will start and 'messages' as usual. The reason for this is a mystery to me, because it is only a problem the first time that you turn it on after a while to be turned off, then it disappears.

  Secondly, when it does not start XP, half the time that it will work fine until the screen is touched (tilted forward or backward), which either will make return empty (but always backlit), or BSOD. The other half of the time, it will start in XP, but after a few moments enclosing or suffer the cutting issue screen without being hit at all. I also tried connected to an external monitor, where the output seems to have the same behavior as the computer screen (on off the moment when you off/white/frozen etc.).

  Now, I have re-installed times mulitple XP on the computer, and (outside), it will work perfectly well in a base state being moved and tilted in all directions, I can think of trying, until I have install the ATI display driver recommended from the Web from Toshiba or legacy ATI site When the problems about screen clipping and booting into the operating system seem to start...

  I also tried to install a distribution of Ubuntu on the machine, which works properly again for awhile once installation is complete, until the machine is turned off and left overnight, the next day, wherever he hangs at startup 'Ubuntu' screen and does not start despite any number of reboots.

  I ran Memtest and it indicates that the RAM is fine, and the HARD drive was also tested and is in working condition. Now, this does not seem to point me in the direction of a flaw with the graphics chip, but I don't know if it would force the latter to expose ALL of the behaviors that shows this machine...

  Someone at - it advice about these issues? Given the age of the machine and taking into account the cost of a new phone of base, I don't think that it is worth my friend spend money on fixing the thing, I try right here save the dump.

  Thank you.

  I can't say with certainty what the problem but, as Akuma have already written, there must be a hardware problem.
  What you can do about it? You can try to find it on eBay or elsewhere mainboard handed to nine and exchange it in the hope that everything will be OK. Otherwise you can give advice to your friend to save money and buy new laptops.

• Satellite L50 - B - sound does not work unless I plugged headphones

  Hello

  I'm having trouble with the sound on my satellite L50-B-1NM, I have nothing on the speakers, but it works fine if I plug in headphones, can anyone help? I tried following the advice of ladies of support and tried to uninstall, but it does not :-(all help would be much appreciated

  Laura

  Hello

  Go to control panel of-> sound-> the Read tab

  Here, you set speakers as the default device.

  Your comments would be appreciated

• Toshiba Satellite L50-B-1DJ does not supply power to the top after removing the HARD drive

  Hello world!

  I have a Toshiba Satellite L50-B-1DJ. It has a 750 GB HARD drive, but it wasn't enough for me. So I bought a Toshiba 1 TB HARD drive. I have undone all the screws, carefully (using my driver's license), lifted up the plastic and removed a HARD disk.

  BTW, I really like this plastic solution on the HARD drive!

  Then I realized, that all my stuff is still on it.
  So I put the HARD drive, I'm going to copy everything on my drive hard Ext. planning.
  Well I screwed it back, got the battery, put the back of the AC adapter.

  Battery charge light was on, indicating that the current flows. I pressed the 'Start' button, and nothing happened. He broke yet still nothing. I plugged the battery and the AC output adapter, I held the Power button for 30 seconds, put everything back still nothing. I got scared. Opened back once more, just to take a look at, so anything that slipped on. Nope.

  Everything is a okay. What should do? I have the warranty? I hope not.
  Can I fix myself without void my warranty? I hope so!

  And also: I bought the laptop in Hungary, but I'm in Germany. Can I fix here in case my warranty is valid?

  Thank you very much for your help!

  Sincerely,
  Bertold Juhasz

  PS: As you say that English is not my native language, please don't flip out on my grammar I know it's wrong

  I just took the hard drive out of mine and put it back to see if I could reproduce your problem after trying several times I had no problem.
  Have you checked the pins at the end of the hard drive to see if all are damaged, another that I can't imagine what else.

  ICH habe just die Fliegengitter aus von mir gemacht und wieder, um zu sehen, ob ich das problem nach dem Versuch're mehrmals I had keine zu make a replication problem.
  Haben Sie die pins am Ende der Tiger uberpruft, um zu sehen, wenn eine beschadigt sind, dass ich nicht, except a great denken nichts.

• Satellite L50-A013 - touchpad does not work

  Hi all

  I've had my L50-A013 Satellite for about 7 months now.

  In the last month or so I started to have problems with the touchpad, freezing and does not not my contact.
  This lasted a few minutes at a time, then came the back of its own accord, almost like a very long latency period.
  This morning, however, I turned on my laptop and the touchpad does not work.

  Device Manager does not display a mouse or pointing device at all until I attach a mouse USB.
  By pressing the key that normally activates / deactivates the touchpad does not work - nothing changes and the light does not turn on in both positions.

  I tried reinstalling the drivers without result, and windows is no update that might help (or any recently that might have caused the problem).

  If anyone has any other ideas for what I can try, it would be amazing.
  The laptop is under warranty so I can hopefully get it fixed, but if possible I would really do not have to go without a computer until it's settled.

  Thank you all for your time,
  -Sase

  Hi Sase

  It is not easy to say what the problem is, but I can imagine that there is hardware problem. Perhaps touchpad loses the connection to the motherboard. I mean if this piece of hardware is not detected I can imagine this scenario.

  Of course best test you can do now is to reinstall OS and test functionality with the factory settings, but will delete your actual configuration of OS and software pre-installed.

  If this kind of test is possible do. If not, I think you must contact the nearest Toshiba service provider and ask for help. They have special diagnostic tools and they can check it for you.

• Satellite L50 - B suddenly does not recognize USB devices

  Suddenly my laptop does not recognize any USB.

  The USB key or external hard drive works on other computers, but not on my laptop.
  Only cards SD-are recognized.

  I tried to remove the usb portals on the Control Panel, but after I restarted my computer all returned.
  One reappear with a caveat that it does not work, but when I search a new program to run it, it can not be found. After removing it, it comes back with the same caveat.

  I also tried to download the new discs (chip set utility) but who doesn't either.
  I don't know what else to do.

  Can someone help me if I can access my USB-products once again on my laptop?

  Hello

  What about the USB mouse? You can use the USB mouse connected to one of the USB ports?

  Have you changed the system or you have installed new OS on this laptop?
  I m asking because the L50 - B Satellite supports USB 2.0 as well USB 3.0 ports

  In the case where you have installed the new OS (Win 7?) on this laptop, the USB 3.0 ports would require additional USB 3.0 driver

  However, in case that you are always using the OS preinstalled Toshiba, I recommend you to reset the initial setup and test the USB ports once more.

• Satellite L50 - A - burner does not work properly

  My DVD recognizes most of the media, also recognizes a floppy blank when inserted, but unable to burn anything on the bank records.

  Machine is about 1 years, used to burn, but now I get an error everytime I try to write anything on a blank disc.
  Out of alignment? Recommended replacement?

  Can you please tell us who don't L50 - has, you have exactly and what software of engraving are you using?

• Titles Panel is doing strange things

  Hello

  

  I use adobe pro CS4 first, and I feel something strange. In two of my projects, something happened to the title editor. As you can see in the picture as an attachment. The tools have disappeared and the editing area is extremely small. It makes it impossible to edit titles. I hope it's a mistake stupid user by me, you've seen this before, and you know how to fix it?

  Have you tried resettings the workspace?

• My Satellite L50-B-1DZ does not start

  I had my computer toshiba laptop for about 8 and a half months and has worked flawlessly with the only problem being that I couldn't connect to the store windows for a month. (It is now resolved). I went to turn on my computer and it was working fine until suddenly the screen turned white and he died immediately.

  To my knowledge, I had more than half the life of the battery on the left, but I tried to load it is in any case, as I suspected that it was maybe dead. When I hold the Start button, it will do nothing, but flash a few times until stop. I don't think it is heated while I was only on it for 5 minutes. I have not damaged it in any way for example. Spill drinks top etc. I am very confused.

  Help, please!

  What happen exactly when you press the power button / stop?
  You don't see anything on the screen?

• Satellite L50 - A - 16 H - Webcam + microphone does not work

  Hello

  I have a laptop Satellite L50 - A - 16: updating win8.1 64 bit.
  When I got this new laptop everything worked fine, but later it stopped working.
  I sent it to Toshiba for repair and ofcouse they made and works (the MB has been replaced?), but now, I noticed that my webcam and my microphone does not work. If I try to open the camera it says 'connect a camera' or on Skype, he asks the same thing.

  I read in the forums to look at the BIOS to enable, but there is no activation/deactivation button.
  I tried to search for a driver for the Webcam in the Toshiba site but I couldn't find: c
  and the microphone "working normally" but I when I try to call my friends can't hear me.

  I hope someone can help me with this problem, thank you very much :)

  You know what: best thing you can do as the ultimate test is to backup all your data and reinstall the original recovery image. By default the BIOS settings and install recovery image.
  After ding that you will have to re-buy factory and absolutely identical situation after laptop settings.
  Please test and send feedback.

  In my opinion, if the problem persists it could be hardware related issue. Maybe is cam not connected correctly.

• Satellite L50-B-166: Webcam + microphone does not work under Linux

  Hello

  I'm under Linux Slackware 14.1 with kernel 4.11 on a Satellite L50-B-166.

  Webcam and microphone are not detected by the system, and I can't find the firmware and the module for them.

  Can someone help me?

  Hello

  I get the Webcam work properly in Fedora 22 core 4.0.6 (Incidentally, kernel 4.11 does not yet exist, so what kernel do you use )
  I suggest therefore that you check the software for the Webcam settings is not simply disabled:

  F2 at the STATION
  Go to advanced > system configuration
  Make sure the Webcam is turned on.

  Tom BR

• Wireless network card does not appear in the Device Manager on Satellite L50 - B - 1 DM

  Hello!
  I bought just new Satellite L50 - B - 1 DM, model number PSKTCE and installed on Windows 7 Professional SP1 64 bit. He came without OS installed and without driver installation disk.
  Problem is that Wlan card does not appear in Device Manager.

  For my Toshiba support model are 37 drivers and programs. I have already installed: Windows 7 Professional 64-bit, all updates to Windows that appeared, SP 1, driver LAN, Toshiba Value added Package. And I tried to install all wlan drivers 4 in the list of "tool utility Intel ' also.
  Does not always display any connection without wireless WLAN card. Pressing Fn + F12 does not change. In "Network connections" is the only connection - LAN. No WLAN, no bluetooth.

  I have "Other devices" in Device Manager with yellow marks on: network controller; PCI device; PCI Simple Communication controller; SM Bus controller. USB controller; Unknown device (with Microsoft ACPI - compliant system location) and video controller.

  Any help would be welcome. Thanks in advance

  If it's not bad - just saw that my BIOS is version 1.70

• WebCam works does not in Satellite L50-A-18R in Windows 10

  Hello

  A few weeks after an update of windows or something, the webcam has stopped working under windows. It is not a hardware problem, as it works fine under Ubuntu.

  Laptop model: Toshiba Satellite L50-A-18R
  Webcam hardware ID: USB\VID_04F2 & PID_B41A & REV_2960 & MI_00

  Tried:

  • Uninstall of & reinstall the driver in Device Manager
    • If I try the option "Online search", he is unable to find the driver.
  • Toshiba Web Camera Application installation [does not work either]
  • Reinstalling System Toshiba settings app.
  • Research online the ID of material for pilots.

  But it doesn't help, need me the driver files to make it work again.

  Thanks in advance for the help.

  Apparently, it was a problem with Windows, as it is fixed with the update of 1067. [Update of the birthday]