Satellite L series - keyboard does strange things

Similar Questions

• Satellite L50 - C Keboard doing strange things

  Hi all

  I have a new L50 Satellite and the keyboard is made of strange things, I get random capital put into words as I type, which means that even now, I'll have to go back and good things otherwise I'm tyYing like that, sometimes the capitals are on constantly regardless of if the caps lock is on and I have to select shift caps lock or shift to get lower-case letters. It is intermittent and sometimes it is worse than the others, I thought, it might be something to do with now the SHIFT key for too long, but it seems to make no difference, I disabled the option keys to sticky etc, but no luck so far.

  It also interferes with me by selecting things on a screen, for example I can't do an Excel sheet spread as the cell is selected, as I am bound to SHIFT or ctrl down permanently, and if I click the cell next to him, it selects that too.

  Any ideas?

  TIA.

  Sounds like a keyboard problem. There is a spillage?
  You may need to send to an ASP for repair.

• Satellite A210 series keyboard does not work properly

  I recently bought a series of A210 with integrated cam and I have problems with the keyboard as when I start typing that he starts to jump all in different areas of the document or sentence is anyway to remedy, it is running windows vista and office 2007

  Hello

  This problem appears immediately after the purchase of the machine? Maybe it s a good idea to recover the machine, he might be a software problem.

  On the other side it sounds a bit like a hardware related problem then if recovery doesn´t has you joy then you should contact a local service partner assistance.
  Here you can find near the ASP in your country (just click on the link and you will find a few):

  http://EU.computers.Toshiba-Europe.com/cgi-bin/ToshibaCSG/generic_content.jsp?service=EU&ID=ASP_SUPPORT

  Have a nice weekend
  See you soon

• Satellite 200-170-keyboard does not work and the keyboard stops working

  My U200-170 2.5 years, I have the following problem:

  When after the start of the key is opperated the keyboard does not work and the keyboard no longer works (works until the button is pressed) connect a keyboard and a usb mouse. does not work because that device unknown. After Internet received external usb driver work ok. someone at - it an idea to solve this problem.

  Thank you

  AJAN

  Sounds like keyboard problem.
  The operating system uses the pilot to clean keyboard and generally it s not necessary to reinstall the special keyboard driver.
  But one thing is really strange; the yellow exclamation mark in Device Manager

  Eventually it s only a problem of software in such a case, a system restore can be useful...

  Have you checked if the keyboard works in the BIOS?
  Do this!

  If the keyboard does not work in the BIOS, then you will need to replace the internal keyboard with the new.

• Satellite M40X-189 - keyboard does not work - long beep consisten

  Hello world

  Thanks in advance for any help provided.
  I have a laptop Toshiba Satellite M40X-189.

  The problem is that the keyboard does not work, and it beeps long consistent. I have to press the keyboard for him to stop, when I get loaded in Windows, the touchpad is ok but I can't type anything with the keyboard. I checked the connection on the keyboard and it went ok.

  Is it possible that the computer tells me that the keyboard is down and replacing it will fix both problems?

  I don't want to spend money on a new keyboard for the same thing happen after installation.

  Anyone who can help me with this problem?

  Thanks again for any help provided.

  In my opinion it looks like a defective keyboard, and I think that a new keyboard to solve this problem.
  External keyboard works on your laptop?

  So in your case I would swap the keyboard.
  In addition, you can contact the nearest ASP and ask for help. Technicians can swap the keyboard for you and order a new one.

  Good luck!

• Satellite A210 - 17l - keyboard does not respond

  Hello

  I have a problem that is driving me crazy.
  When I press F2 or F12 to switch on the keyboard behaves as it should.
  However if trying to load a Boot CD or Usb car via the options F12, the device is recognized
  but click on any other key, the cursor just sits there intermittently at me and the keyboard does not respond.
  What makes strange, is that an external keyboard is recognized but the mirrors one internal.
  I have the latest version of the bios update.

  F2 in the bios - ok keyboard.
  Start in win7 - keyboard ok.
  Insert bootable back disk via F12 option-charges but no keyboard reagent.
  I think a partial corrupt bios
  Someone has ideas about problem or even a solution.

  Posted by mr.pound
  

  but click on any other key, the cursor just sits there intermittently at me and the keyboard does not respond.

  And what should happen on this stage?

  For me, this looks like a problem with your startup disk.
  I installed OS using different disks of Microsoft or USB recovery media and all you have to do is click on most of the time on the button NEXT.

  If the keyboard works in BIOS and Windows, I see no problem with the keyboard there.

• Satellite Pro M50 is doing weird things perpetually

  Hello

  I come to you in a State of defeat, I have in my care at the present time a friends Satellite Pro M50, Model No.: PSM55E-003001EN, who does BIZARRE things perpetually, I tried to diagnose for a few weeks and am still absolutely perplexed.

  When started after a period of time (for example, be left overnight), the computer turns on, the rotation of the fan disc to the top, but nothing comes on the screen, it is completely blank. If you turn it off and turn back on again immediately, after that it will start and 'messages' as usual. The reason for this is a mystery to me, because it is only a problem the first time that you turn it on after a while to be turned off, then it disappears.

  Secondly, when it does not start XP, half the time that it will work fine until the screen is touched (tilted forward or backward), which either will make return empty (but always backlit), or BSOD. The other half of the time, it will start in XP, but after a few moments enclosing or suffer the cutting issue screen without being hit at all. I also tried connected to an external monitor, where the output seems to have the same behavior as the computer screen (on off the moment when you off/white/frozen etc.).

  Now, I have re-installed times mulitple XP on the computer, and (outside), it will work perfectly well in a base state being moved and tilted in all directions, I can think of trying, until I have install the ATI display driver recommended from the Web from Toshiba or legacy ATI site When the problems about screen clipping and booting into the operating system seem to start...

  I also tried to install a distribution of Ubuntu on the machine, which works properly again for awhile once installation is complete, until the machine is turned off and left overnight, the next day, wherever he hangs at startup 'Ubuntu' screen and does not start despite any number of reboots.

  I ran Memtest and it indicates that the RAM is fine, and the HARD drive was also tested and is in working condition. Now, this does not seem to point me in the direction of a flaw with the graphics chip, but I don't know if it would force the latter to expose ALL of the behaviors that shows this machine...

  Someone at - it advice about these issues? Given the age of the machine and taking into account the cost of a new phone of base, I don't think that it is worth my friend spend money on fixing the thing, I try right here save the dump.

  Thank you.

  I can't say with certainty what the problem but, as Akuma have already written, there must be a hardware problem.
  What you can do about it? You can try to find it on eBay or elsewhere mainboard handed to nine and exchange it in the hope that everything will be OK. Otherwise you can give advice to your friend to save money and buy new laptops.

• Satellite A665-S6086 - keyboard does not work after the outpouring of fluid

  I have a Toshiba Satellite A665-S6086 laptop. A couple of months, I spilled the zeroth power and he went on the keyboard. I'm sure that some went through it as well. The computer turns now and I can use an external mouse and external keyboard. Nothing on my keyboard does not work as well as the mouse. I can't go on the internet due to not being able to use the F8 key so.

  The only key/button that works is the power button. The dvd/cd drive works.
  Help, please.

  The external key board I use has no FN key. a f1 to f12, but when I hit the button on the external key board f8 nothing. Please help me get internet light somehow.

  Thank you

  And what kind of help do you expect now? What can we do?
  Why you n t fix it and be happy with the new keyboard?
  How long you want to use your laptop in such a State?

  Contact Toshiba service, let them swap keyboard and clean your laptop. OK it's a bit chilly but you'll well workbook again.

• Satellite Pro L500 keyboard does not

  My Satellite Pro L500 keyboard has sudenly stopped working, how to run other than a remote keyboard?

  > keyboard has suddenly stopped working

  You didn t post lots of details about the keyboard, but I think there could be a simple hardware malfunction that can be solved only by the replacement of internal keyboard.

• Satellite L500-1XL - keyboard does not work

  Hi I HAVE L500 - 1XL AND MY KEYBOARD DOES NOT have THE RETURN BACK of the KEYBOARD key AND TYPING I GET A ROW OF THOMAS LIKE THIS IVE CLEANED AND STILL do not WORK

  Hello

  Get in touch with your Toshiba ASP your country and request a replacement keyboard.

  Welcome them

• Satellite L450D - 11G - keyboard does not work

  Yesterday my laptop had bad start up and when he did, saying driver error.

  Today I tried it and it turns on but the keyboard does not work.
  Any suggestions?

  >... it says driver error.
  Just or is driver error may be written which driver exactly?
  Start your laptop in SafeMode (F8 at startup) and check if the same keyboard problem occurs again.

  Be so kind and post comments.

• HP HDX Premium series: keyboard does not work

  My keyboard does not work after upgrade to Windows 10. I have to press the button for 3-5 seconds to make it work. Looking for a solution. Thank you.

  Hello

  Check the following points.

  Open windows control panel and on the top right, next to the display by: select "large icons".  In the new page layout, select the "ease of access Center.

  Select the option "make the keyboard easier to use".

  If there is a check mark next to 'Turn on filter keys' or "Activate sticky keys", click on the box to Remove , then click on apply and then Ok to save this change.

  Kind regards

  DP - K

• Re: Satellite L40 - 18Z - keyboard does not work properly

  I have Satellite L40 - 1BZ and only vowels will work when you try to open a session?

  I turn the laptop on and I tried to enter the password (using Vista home Premium) and it will just hit me the vowels and Caps lock?

  Help someone mention I could download the BIOS but I put t really know what I m doing.

  I imagine you have this L40 longer and it will be interesting to know since when you noticed this behavior strange keyboard.

• Satellite A60-106 keyboard does not

  I have the laptop above that I took apart to clean the fans. I had to remove the keyboard to do this, and when I put back it together that happened something strange. The first time I started it only half the keyboard worked. I took apart again to check the water and he was sitting and implemented correctly. When I turned this back, reworked keys.
  However, I have noticed when it lights up, caps lock light flashes as it should. However, I can't enter the BIOS or windows boot menu or type nothing when the operating system is loaded.
  I bought a new keyboard now and it does exactly the same thing is not that.
  The USB keyboard works well and I noticed that when I put the caps lock on the caps lock on the keyboard of the laptop also comes on but the keyboard still does not work.
  I downloaded the latest toshiba Web site bios but when I try to start it (this is a windows-based program) it says 'UpdatePlatform failed '. It is the correct bios found here: http://support.toshiba-tro.de/tools/eula/info_eng2.asp
  Here, any advice would be appreciated.

  Hi dude

  > I have the laptop above that I took apart to clean the fans. I had to remove the keyboard to do this, and when I put back it together that happened something strange.

  Have you deleted parts more than only the keyboard to clean the cooling module?
  I guess you did!
  What to tell my friend to me it looks like a hardware problem and it seems that you have done something wrong during disassembly, but portable.

  I put t thing that could update the BIOS helps you because it doesn't look like a BIOS problem. Why? Because it looks like the laptop successfully ran before the opening!

  In my opinion, that you should contact a mobile technician as a common user like you who have no experience will not be able to remedy!
  The ASP can help you. Guys have more experience and use special tools to locate the failure!

  Good luck

• Satellite Pro C850 keyboard does not work properly and opens several programs

  My satellite pro C850 1HE keyboard intermittently stops working correctly, and begins to open programs, for example, by pressing F will open the file search, C open computer this kind of thing

  is there a permanent solution to this problem?

  This is not something to do with installed programs is not something to do with the browser settings.
  restarting the computer works in a short time, but that is a long time, it's really annoying because I use this for work and study!

  > is there a permanent solution to this problem?

  The question is what causes this problem? Is it related hardware or software related issue?

  Why n t connect a USB keyboard just to check if the same would happen?

  In case the USB keyboard would work fine, I guess that the internal keyboard failures and the solution would be a simple replacement of the defective part.