Titles slightly melted into fcp6

Similar Questions

• Coding: melted into a symbol with a certain delay

  Hello

  Animate cc provides some code of discoloration in a symbol

  this.addEventListener ('check', fl_FadeSymbolIn_2.bind (this));

  This. Mov_Test.Alpha = 0;

  function fl_FadeSymbolIn_2()

  {

  This. Mov_Test.Alpha += 0.005;

  If (this.) Mov_Test.Alpha > = 1).

  {

  this.removeEventListener ('check', fl_FadeSymbolIn_2.bind (this));

  }

  }

  Is it possible to add delays to appeasement in? The symbol should appear on the screen after a few seconds.

  Thank you.

  You work with a document AS3 or canvas? Whatever it is, there is a library of interpolation you should use instead of your current approach.

  AS3:

  http://help.Adobe.com/en_US/FlashPlatform/reference/ActionScript/3/FL/transitions/Tween.ht ml

  Canvas:

  http://www.createjs.com/docs/tweenjs/modules/TweenJS.html

• Titles that merged into a clip.

  Hello

  In the first CS6, what is the best way to merge right and left to one lane so that you get a mono through two output channels?

  Thank you.

  I like option 3.

  http://www.larryjordan.biz/Premiere-Pro-CS6-isolate-audio-channels/

• Variables do not work with topic titles

  Hello
  
  It seems to be a bug and the limitation of the variables in topic titles. Inserting into the table of contents works very well. The title of the topic in the table of contents is displayed correctly. However, if you do a search, all the subjects that contain a variable in the title appear incorrectly in the results - all text up to and including the variable are cut.
  
  You can not (as far as I can see) insert variable for topic titles using the RoboHelp interface. It is - unlike in the table of contents - you can not select Properties for a subject and insert a variable in the title of the topic (in the table of contents, it means the Page title). The way I put variables in my project (was an I upgraded x 5 to RH7) went through a search and replace operation for all the *.htm files. This included replacing the head HTML < title > < / title > entry. For example:
  
  Before: < title > what is a profile of Bill? < /title >
  After: < title > what is < uservariable name = value x Document_type1 x-showvalue = "invoice" > invoice < / uservariable > profile? < /title >
  
  When I search on this topic, the results of research is just profile? This problem applies to all topic titles that contain variables.
  
  It seems that the variables in the headings are not supported by RoboHelp, which is a major limitation of this feature. My project contains many variables in topic titles, which makes useless subject research, as the list of search results is composed mainly of incomprehensible securities and cut.
  
  Someone else has the same problem? Is there a solution?

  Thanks for your reply Peter.

  Yes, it is indeed a limitation of RoboHelp and the way it uses HTML:

  * The title of the topic that appears in the properties of the section and in the search results is stored in the HTML head

• Regular Expressions of Drivng me crazy!

  Oracle Version 11 GR 2

  Scripts of test data

  CREATE TABLE REGEX_TEST

  (ID NUMBER 4,

  VARCHAR2 (50) COMMENTS

  );

  Insert into REGEX_TEST (ID, COMMENTS) values (1, "< Little Red Riding Hood > #title");

  Insert into REGEX_TEST (ID, COMMENTS) values (2, "#title < Little Red Riding Hood > #publisher < Penguin >");

  Insert into REGEX_TEST (ID, COMMENTS) values (3, ' #title < Little Red Riding Hood > #publisher < Penguin > #pages < 30 > ");

  Congratulations to Frank Kulash to provide the following SQL to clean the field of comments only properly marked the text in the field

  Properly tagged text is defined as

  Start by #.

  then nameOfHashTag

  then < valueOfHashTag >

  The number or name of hashtags is variable and is not known at design time

  The Frank provided SQL is (with a slight mod)

  Original, SELECT comments

  REGEXP_REPLACE (comments

  , '(^|>)[^#.*<]*'

  "\1") that cleaned

  of REGEX_TEST;

  Source language

  
  CLEANED#title < little Red Riding Hood >#title < little Red Riding Hood >#title < little Red Riding Hood > #publisher < Penguin >
  #title < little Red Riding Hood > #publisher < Penguin >#title < little Red Riding Hood > #publisher < Penguin > #pages < 30 >#title < little Red Riding Hood > #publisher < Penguin > #pages < 30 >

  
  

  FIRST QUESTION: I understand the [^ #. * <] * component - search for zero or more occurrences of anything that is not a # tracking of zero or more characters, then a < and I understand the () sets a capturing group, but I don't understand how it works - 1 is probably a reference to the Group?

  Now, I add a few more - lines to see how he treats badly marked text that is

  void <>

  text that is not marked

  text is not enclosed by sharp hooks

  Insert into REGEX_TEST (ID, COMMENTS) values ('4, #title <>");

  Insert into REGEX_TEST (ID, COMMENTS) values (5, "#title <>#publisher < Penguin >");

  Insert into REGEX_TEST (ID, COMMENTS) values (6, "#title < Little Red Riding Hood > text that isn't marked < Penguin > #publisher");

  Insert into REGEX_TEST (ID, COMMENTS) values (7, "#title oops I forgot #publisher < Penguin > rafters").

  
  

  
  

  Original, SELECT comments

  REGEXP_REPLACE (comments

  , '(^|>)[^#.*<]*'

  "\1") that cleaned

  of REGEX_TEST;

  Source language

  
  CLEANED#title < little Red Riding Hood >#title < little Red Riding Hood >#title < little Red Riding Hood > #publisher < Penguin >
  #title < little Red Riding Hood > #publisher < Penguin >#title < little Red Riding Hood > #publisher < Penguin > #pages < 30 >#title < little Red Riding Hood > #publisher < Penguin > #pages < 30 >#title <>#title <>#title <>#publisher < penguin >
  #title <>#publisher < penguin >#title < little Red Riding Hood > text that is not signposted #publisher < Penguin >
  #title < little Red Riding Hood > #publisher < Penguin >#title oops I forgot the #publisher < Penguin > rafters#title oops I forgot the #publisher < Penguin > rafters

  SECOND QUESTION: Is there any way I can specify that the <>cannot be empty - I played a bit with the +? but impossible to get what I want.  Similarly, the latter (without text no sharp hooks)-I guess this would be impossible because you don't know if it was wong, until you have met the # next date you would be somehow to follow back and ignore the whole group.

  I learned two things in this

  1. regular expressions are extremely powerful

  2. but they will drive you crazy?

  Once again thanks a lot for the help

  BTW - I managed to do what I had to do it using a lot of PL/SQL code, but not very fast!

  Hello

  So, you want only the substrings that are well-formed attribute/value pairs (attribute or value may be missing).  You want to ignore anything in the comments that is not part of a well-formed pair.

  It is not very difficult to get a single well-formed pair.  The problem is that there is no good way to say 'everything that is not part of a well-formed pair '.  One solution is to extract from each pair trained well on a separate line and then re - combine them into a single string by id, like this:

  WITH split_data AS

  (

  SELECT id

  comments

  REGEXP_SUBSTR (comments,

  , '#'      ||  -sign #.

  '[^<]+'  || ="" --="" 1="" or="" more="" of="" any="" characters="" except="">

  '<'      || ="" --=""><>

  '[^>]+'  ||  -1 or several characters any except >

  '>'          -- > sign

  1

  LEVEL

  ) AS well_formed_pair

  LEVEL AS pair_num

  OF regex_test

  ([LEVEL CONNECTION <= regexp_count="" (comments,=""> <> <[^>] + > ')

  AND PRIOR id = id

  AND PRIOR SYS_GUID () IS NOT NULL

  )

  SELECT id

  commented THAT the original

  LISTAGG (well_formed_pair) WITHIN GROUP (ORDER BY pair_num)

  THAT cleaned

  OF split_data

  GROUP BY id, comments

  ORDER BY id

  ;

  The 2nd argument of REGEXP_SUBSTR above is actually the same as the 2nd argument of REGEXP_COUNT.  I wrote one of them in a more detailed form, hoping to make it clear what happens if has been done.  You can write an expression so be it.

  The result is just what you asked:

  ID CLEANED ORIGINAL
  --- ---------------------------------------- ---------------------------------
  1 #title #title

  2 #title#publisher #title#pu
      blisher

  3 #title#publisher #title#pu
      #pages<30> blisher#pages<30>

  4 #title<>

  5 #title<>#publisher #publisher

  6 #title #title#pu text
  is not marked #publisher blisher

  7 #title oops I forgot that the rafters whoops # #title forgotten angle br
  Editor ackets #publisher

• Encoder Media ceases at the end of the (first CC 2014) video coding

  I've finished editing a video (a little less than 4 minutes). When I try to export to a file of windows (HD 1080 p) media it always stop coding at all about the 50% mark.

  • I tried to export to a shared network drive and the hard drive local, with the same results.
  • I updated: Mercury Playback Engine software only
  • I tried to export directly from first and Media Encoder.
  • I looked where it stops during the export of the encoder through the preview window. It seems to happen at the end of the video and stops right where I melted white and the music ends. The interesting part it the timer indicates 50% left to complete
  • He don't plant... it's just there with increasing timer and never continued
  • I do not plug-ins.
  • To the point where it stops, I have a 'Dip' transition to white on a music video and no audio transition applied to the soundtrack since it ends well with video.

  Please let me know if there is anything else I can / should I explain to get help. Thank you very much for your help.

  System details:

  Operating system: Windows 7 Professional 64-bit (6.1, Build 7601) Service Pack 1 (7601.win7sp1_gdr.140303) - 2144

  Language: English (regional setting: English)

  Manufacturer: Hewlett-Packard

  System model: HP Z230 Tower workstation

  BIOS: Default system BIOS

  Processor: Intel Core i7-4790 CPU @ 3.60 GHz (8 CPUs), ~3.6GHz

  Memory: RAM 16384MB

  Available OS memory: 16070MB RAM

  Card name: Intel(r) HD Graphics 4600

  Manufacturer: Intel Corporation

  Chip type: Intel(r) HD Graphics Family

  DAC type: internal

  Display memory: 1 696 MB

  Dedicated memory: 64 MB

  Shared memory: 1632 MB

  Current mode: 1920 x 1080 (32 bit) (60 Hz)

  Peferling... I have a positive update! I went to the area that usually makes things die. I noticed that it was the end of queue where I inserted a sequence in another sequence. I also noticed I had three tracks in this article with graphics. So I copied all the tracks in the sequence inserted... then removed the inserted sequence and re-inserted tracks real. At this point I had more an inserted sequence. Then, I simplified the three titles of graphics into one. Again my transitions and final tweaking. I tried once more export as H.264 HD... and voila! It worked! Something must have been breaking.

  For now, I agree and have been able to export in other formats. I want to thank you very much for your comments. Best regards, Nelson

• Update LCD on T60 2008-CTO

  Hello everyone.

  I'm trying to replace a screen LCD XGA on my T60 2008-CTO with a SXGA Panel + for more resolution.

  According... http://www-307.IBM.com/PC/support/site.WSS/document.do?lndocid=MIGR-62784 , the frame numbers match and that should be possible.

  So I bought the said Panel of... http://www.ETech.com/item--NYK412-034 and it does not work properly.

  For all connected, I get gradually melted into lines of colors on the screen.

  If I disconnect and reconnect the control panel while the laptop is turned on, I get a very distorted picture and wrong dimension on it and change the resolution in windows changes the serious distortion a bit.

  Could someone shine light on it?

  Is that possible even exchange, or the resolution of the LCD permanently within the motherboard somehow?

  I currently have a LTN141XA-L01 as my LCD XGA panel if it matters.

  Thanks in advance,

  -DeagleRevolver

  Welcome to the forum!

  Yes, you can upgrade your T60 a SXGA + Panel, however, I doubt that what you bought is a real issued by Lenovo LCD, plus probably a sign 'no brand generic but compatible with everything '.

  There are a number of RUF on this 'new' LCD?

• Cannot connect to computer with Windows 2000, because it asks for a password

  Original title: help get into the computer without internet

  I have an old computer and I just want to access it without connecting to the internet, but I can't get in as it says I need a password.  It was my mother's old computer and there is no password, why am I being asked to an entry?

  Is there anyway that I can get this deleted or go around it somehow.  The computer has Windows 2000 on it, so I know that there is no support.  Is there something else I can do?

  Please notify.  You can reach me at the * address email is removed from the privacy * or * address email is removed from the privacy * or * address email is removed from the privacy *.

  Thank you

  Patricia Rawlings

  Hi Trish512,

  Microsoft technical support engineers cannot help you recover the passwords of the files and Microsoft who are lost or forgotten product features.

  Microsoft's strategy concerning lost or forgotten passwords

  http://support.Microsoft.com/kb/189126

  Thank you, and in what concerns:

  Ajay K

  Microsoft Answers Support Engineer
  ***************************************************************************

• Whenever I try to watch a movie on Netflix it says that an error has occurred.

  I recently got a MacBook Pro and I'm watching Netflix. Whenever I try to watch a movie, it says that an error has occurred. I contacted Netflix and they said it was a problem with brightness of light. How can I fid which. I also have trouble downloading oovoo.

  original title: slight help Sliver

  Hello

  Check with SilverLight Experts in Installation and configuration of the MSDN Forums - SilverLight.net - forums

  MSDN - SilverLight.net Forums
  http://forums.Silverlight.NET/

  I hope this helps.

  Rob Brown - Microsoft MVP<- profile="" -="" windows="" expert="" -="" consumer="" :="" bicycle=""><- mark="" twain="" said="" it="">

• Why my internet explore stops when I click on certain links, when I'm on the web page of someones

  original title: slightly annoyed

  Why my internet explore stops when I click on certain links, when I'm on the web page of someones

  Hello

   
  What operating system is installed on your computer?
   
  What is the version of Internet Explorer you are using?
   
  Is there an error code or the message that if displayed when you click on a link in the browser?
   
  Check out the link and follow the steps.
  Tips for solving problems when Internet Explorer hangs or stops working

  http://Windows.Microsoft.com/en-us/Windows-Vista/tips-for-solving-problems-with-Internet-Explorer

  WARNING: Reset Internet Explorer settings can reset security settings or privacy settings that you have added to the list of Trusted Sites. Reset the Internet Explorer settings can also reset parental control settings. We recommend that you note these sites before you use the reset Internet Explorer settings

• Research Assistant opens when a double click on a folder

  Original title: I went into Control Panel, then the folder options, and then click the types of files, then highlight the first file, click on advanced and screwed some thing until now when I try to open a file, it opens in the search.

  I need to know what to put in the Application used to perform action: box. In the action of new action area I type open; and then I need to know what is the standard application windows uses to open files.

  In fact, I think I deleted the command open when I got.

  Thanks and regards, Brad Henderson

  I went on the internet and search for Windows issue on folders and search... option that worked for me... go to run, type: regsvr32 /i shell32. Wait for complete, if this does not work, I can send you the website with an alternative.

• A message appears indicating there is no emails in the Inbox, but when I go to spam my emails there.

  A message appears indicating there is no emails in the Inbox, but when I go to spam my emails there.

  original title: Mail goes into the wrong box

  Hi Sheila,

  If you use Windows Live Mail I would say looking at this thread:
  http://windowslivehelp.com/thread.aspx?ThreadId=1908d39c-2a44-432F-9e8a-c7e6a1bde912
  It can also be good to post on the Windows Live forums located here:
  http://www.windowslivehelp.com

• Gateway XP is slow, how to increase the speed?

  My husband is using my old gateway with only 37gbs. to get the speed increase I can or should increase the ram with one of these $30... 00 plug-ins, all what he has on the gateway shortcuts website, no photos, music, files, etc., but it is slower, so you can imagine. It is using XP. two computer guys - Ha! says I need more ram and no more memory, they should me these tips that you just unscrew the back of the gateway and connect.

  * original title - will plug into one of these thingys increase speed ram? (adaral did nothing!) *

  Hello

  See the bottom of the articles that might help you improve the performance of the computer.

  Slow PC? Optimize your computer for peak performance
  http://www.Microsoft.com/athome/Setup/optimize.aspx
  How to make a computer faster: 6 ways to speed up your PC
  http://www.Microsoft.com/atwork/maintenance/speed.aspx

• Machine XP must be reactivated, but try does nothing

  I use Windows XP Home Edition. When I moved the computer in another room and tried to start, I got a message that I had to activate this copy of XP.  When I click on activate the cans just to hard drive, but nothing happens.

  I loaded another copy of XP on the drive and was able to activate it. but I would use the old becuse copy, there all my

  Programs on it and I don't want to reload all the programs and get all updates.

  * original title - computer moved into another room and Xp active itself.  When I click on activate the cans just to hard drive but nothing happens *.

  Hi a. Borsetti,.
   
  -Have you loaded another copy of Windows XP on the same drive where the previous copy of Windows XP was installed?
   
   
  If so, I'm afraid to inform you that you cannot recover programs by loading the old copy of Windows XP with the CD on the other.
   
  Next time, before you try to re - install Windows XP, make sure that you take a backup of all important programs and documents required.
   
  Back up your files
   
  Windows XP Backup Made Easy
   
  To activate your Windows XP, see:
   

  How to activate Windows XP

• I totally close to wake the computer after hibernation.

  Original title: laptop goes into hibernation mode when not in use - I used to wiggle my mouse and it is on, not any others - have to shut down the computer and restart it-just started this topic about a month ago

  I'm not sure that this question has been posted when I signed up to 5 hours if there is so, so sorry.

  I use windows vista-Toshiba laptop. I'm not a computer wiz - so let me know what you need. My husband is but doesn't have a Windows Vista and it's a challenge to work with. so I'm pretty much on my own. Help!

  This link has included troubleshooting steps.

  Vista - Problems in Sleep Mode and Power Options
  http://www.Vistax64.com/tutorials/63567-power-options-sleep-mode-problems.html

  See also:

  A Windows Vista-based computer resumes the mode not sleep if you move or click a USB mouse as the computer is switch to sleep mode
  http://support.Microsoft.com/kb/930091