TL 938 G wifi direct support or not?

Similar Questions

• HP M9V10PA #ACJ: usb. Bluetooth not share internet connection, wifi direct does not

  M9V10PA #ACJ model number

  HP deskjet 5525 e printer all in one

  question: -.

  1.) can print via usb to the laptop window function 8.1, allows to print wireless from my smartphone Android based without direct WiFi router, connect to eprint, wireless with mobile router but can not print from my new hp laptop network is limited with! sign and the printer is not detected. (if printer problem, then it can not print from mobile and if problem laptop, he could not able to connect to internet I use.)

  2.) my computer laptop wifi direct support means can I Exchange offline like bluetooth and can my printer is my computer laptop wifi and I can connect from printer.

  3.) bluetooth teathering in andriod do not share internet on my laptop when I teather.

  4.) usb teathering does not share internet to andriod which is samsung galaxy mobile new j7 sharing internet via wifi.

  None of your support team is able to answer all these questions and not even want to listen to. All what they just time passes I try for 5 6 7 6 hours wasted days. they have just replied to the request is transferred to the technical service of master. If you have a mail solution please me [email protected]

  USB and bluetooth internet sharing in 8.1 window I had to update my driver in the Device Manager I have updated ndis network driver that was yellow highlighted in color and it was not installed in window 8.1. After installation two teathering worked well.

  For direct wifi in the printer I just on my direct wifi on my printer and network printer highlighted me in networks in form of PRINTING HP 41 Deskjet 5520 series with signs ! in wireless. ! sign simply means the network is limited and cannot share internet. So jusst linked to that as network limited and then used software to connect as wireless HP printer. It worked well, but have still the issue with speed on the network even my signal is full. Wifi printer on the direct network access speed is very very slow, I'm connected.how to improve the speed, I don't know.

  Another issue is that my laptop is same average direct wifi capabilities to communicate with other devices can I create my own hotspot by laptop same name network HP-PRINT 41 Deskjet 5520 series in printer not supposed to share internet, but at least for wireless data sharing.

• How to send / receive files via Wifi Direct... ?

  I found this bike e wifi Direct support. I tried to send files via wifi direct, but I couldn't.

  How to send / receive files with direct wifi without installing any 3rd party application... ?

  Uses of direct wifi... ?

  Sorry about that. Can be a regional thing, I'm not familiar with.

  Back to my question - what types of files you try to move?

• Linksys e4200 with wifi direct does not connect to the kdl-48r470b

  I just bought a Sony kdl-48r470b tv of the grand prix of Wal-Mart and image, but with the info on this tv being ill not do now to the community for help here.

  Im trying to connect the TV via wifi direct to my router from linksys e4200. the router has wifi direct.  my pc is connected to the router via a network cable. the idea here is that I want to push films to the router, then to the tv via wifi direct.

  the problem is that the tv refuses to connect to the router told me just recording failed. Ive tried the pin of my router still nothing ive disabled the security still has nothing, Ive used the method push button and still nothing.

  is it possible to connect to the router? IM thinking this way because it has direct wifi.

  I contacted sony 3 days ago and have received zero responses from them

  Thanks in advance for your suggestions

  So what you saying is this TV is not able to sell the linksys router? I'm still so confused with this TV... If it says built in wifi, you should be able to connect to your router... looks like there should be a way...?

  very irritated by this situation!

  Thanks for the quick reply... too bad sony can't come back with me with a solid answer... or I could at least understand the rep...

  Denise

• ENVY 5540 All - In - One Printer: how to change the password want TO 5540 WIFI Direct from HP default to a different password?

  I try the functions on my new 5540 ENVY. Everything is set up and working correctly so far. I just printed a document from my iPad using the WIFI Direct function on the printer successfully. However, the default password on the printer for the WIFI Direct is simply "12345678". Surely, it should be replaced by a more secure password. My friend something printed its iPad - so obviously, this password is not exclusive to me, anyone can print stuff on my printer just for fun and I have a lot of students around me, the problem could become expensive for me and very boring. WIFI Direct signal covers a distance. I contacted HP telephone support, but the process is time consuming and I had to hang up because I had to work. Maybe someone here could give me instructions, and I can change the password when I have free time. I use wifi for internet (cable ethernet only) and the printer connected via USB to the computer. Also, when I turn on my computer (BUT NOT THE ROUTER) on the wireless function, the printer is and what I need to do is enter "12345678" and start printing. There is no guarantee either. Can someone tell me how to change the password for WIFI Direct 5540 envy? Thank you.

  I'm sure that you can change the EWS web page for your printer.

• WiFi Direct | Bluetooth THE | NFC - Questions

  does not do anything with WiFi Direct even as a developer - only as a user for Miracast.

  have tested the sample application

  now have a few questions before I decide to use it

  Maybe someone can share some details

  ---

  WIFI DIRECT

  Is it possible after the first synchronization of time to connect without user interaction?

  If possible it is possible the app without a head?

  ....

  think of this workflow:

  environment:

  * Peripheral BB10

  * W Arduino THE BT / WIFI live support

  UseCase:

  User with BB10 device detects via THE BT as its is close to the Arduino

  BB10 App connects to the Arduino via WIFI Direct

  Data are transferred from Arduino to BB10 via WIFI Direct

  better would be if - after the first time synchronization is made - it could be done in the background

  (without head on BES10)

  If the background is not possible could also be executed if reduced

  most important:

  ANY intervention from the user to connect via THE BT and WIFI Direct

  If this cannot be done without - is it possible to be done using NFC tags?

  ----

  more details on the usecase:

  (a) a truck driver already running BB10 business app for managing work orders

  (b) inside of the truck, there is an Arduino by CAN - bus of tracking data and Mongo DB collection

  Truck driver going in and out of the truck and if there inside the truck collected data should be transferred to the BB10 device, then BB10 sends the CAN bus data to the server via MQTT if there is network coverage or later via WIFI in the office

  The great thing: customer didn't need additional SIM for CAN-bus-transfer of data, the BB10 device is already used for orders and sends data via REST to the server

  I modified the sample WiFiDirect-ion, so that half of the application that receives connections ran without head and it worked.  The one catch is that notification of the API is always displayed.  Here's a picture of what it looks like to my blog a WiFi direct connection mode that displays the command prompt.

  So you could do the Wi - Fi Direct connection from an application without a head without requiring the intervention of the user, but the dialog box is displayed.  But you can't have a WiFi connection to Direct a headless application without the user accepts the connection (see this screenshot of the same blog).

  So for your case, it should work since you could do your application BlackBerry 10 connection to the Arduino.

• [Issue] How data is transferred when you use BlackBerry (NFC) Tag? WiFi Direct? Bluetooth 2.1? Bluetooth 3.0?

  Hello

  I saw a bunch of videos of demonstration of tag BlackBerry of all the cool things you can do with the NFC, but it wondered, what happens if all my other antenas wireless, WiFi and Bluetooth, are out of?

  NFC can be used to transfer data, but it is not good for large quantities. I looked a little further and I found this cool video showing the difference to use Bluetooth 2.1, Bluetooth 3.0 high speed and Wifi Direct to transfer large files, such as videos. BB10 already does support Wifi Direct? Bluetooth 3.0 high speed?

  I hope that BB10 supports ALL the performance and maximum compatibility.

  I don't know where to post this question so here's. Please move was a better place. I think that the community needs a session of general development for wider issues.

  See you soon!

  Hello

  Tag BlackBerry, and the APIs available for developers will automatically perform the best way to transfer the data. NFC supports something called "connect transfer" and are the largest payloads or certain types of data (photos, for example) rather than by peer-to-peer NFC, NFC mode data transfer is just used to negotiate alternative transport. In the case of the BlackBerry smart phones, this alternative will be bluetooth.

  For users of touch devices, there is a brief 'conversation' between the devices on the NFC and this translates into a bluetooth connection set up and data transfer initiated through the bluetooth connection faster. This is all without the usual matching process. After reaching the stage of bluetooth devices need closer will be of course.

  The same principle applies to both 7 BlackBerry and BlackBerry 10. In fact talk us a bit about this in our latest article on BlackBerry 10 NFC API:

  http://supportforums.BlackBerry.com/T5/native-development/BlackBerry-10-sharing-using-NfcShareManage...

  I hope this helps.

  For more information on see NFC:

  http://supportforums.BlackBerry.com/T5/Java-development/NFC-article-and-code-index/Ta-p/1538775

• WIfi Direct (WiDi) on laptop Studio 1749?

  If I add an Intel N 6235 card to a laptop Studio 1749 he will support WiFi Direct?  Does rely on the particular spec of the 1749 individual and if so how can I check?

  TIA,

  Mike

  Open Device Manager in Control Panel.  If you see a listed card ATI or Intel, you have discreet video that will not support WIDI.  If you see an Intel graphics card, you should have the WIDI support.

• Windows 8, cellular modem and WiFi direct printing problem.

  • I have a Samsung ATIV Smart tablet PC running windows 8 (not RT). The Tablet contains a cellular radio. We use the tablet in an environment without Wi - Fi access so access to internet via the cell connection.
  • We have a Samsung printer that sets its own Wi - Fi hot spot to printing purposes. (WiFi Direct?).
  • We can browse the internet with Internet Explorer, and we can print to the printer using a wireless connection. However, when it is connected to the printer via Wi - Fi (printer only, not internet), even if the cellular connection stays 'connected', the browser can no longer access the internet.
  It seems that there is something in the PC saying: ' hey, I have a Wi - Fi connection, so I'm not going to use cell phone for my Internet "even if there is no available WiFi internet. Is there anything I can do about it? The goal of buying this material was able to complete and print the web according to the forms in the hospital, where we have no access to the hospital network.
  Rick.

  Hi Rick,

  There could be conflicts with the Wi - Fi and cellular connection. Based on this situation, I suggest you contact the Samsung Support for assistance on this issue.

  http://www.Samsung.com/us/support/contact

  If you have any questions on Windows, feel free to let us know. We are happy to be of assistance.

• USB dongle Wifi taking supported 802. 1 X

  I need a Wifi Dongle USB that supports the Protocol from 802. 1 X.

  The specific problem I am solving is that I am in a place of dead wifi in the office.  10 ft away the signal is very good.  I want to plug a dongle wifi at the end of a 10-foot USB cable to receive good reception.

  Wifi office using 802 Protocol. 1 X so not all USB Dongles work.  I bought an Edimax EW-7822UAC, but it does not support the Protocol from 802. 1 X on OSX.  The source of this information is the Edimax support person I spoke on the phone.  He said that nothing the Edimax wifi dongles support 802. 1 X on mac (support on Windows).

  Assuming you mean 802.11 x wifi is a standard. A dongle 802.11 x wifi isn't different protocol-wise of your bed in your computer wifi card.

  The difference is required to push the dongle usb drivers. Some dongle manufacturers only create drivers for Windows. If you choose a dongle manufacturer that provides Mac drivers to enable the dongle work with your MacBook Pro.

• Is WiFi adapter supports WPA - PSK on Equium A100-147 encryption?

  I decided to buy a satellite A100-147, but I would like confirmation that the WiFi adapter supports WPA - PSK encryption. I can't find confirmation anywhere. My guess is that he does, it's a recent machine, but I would be sure.

  Thank you once again.

  Doug

  Hello

  I m not 100% sure what wireless network adapter has been installed on this unit but I think it might be to use an Intel Wireless 3945ABG card.

  The Intel PRO/Wireless 3945ABG card supports WPA, WPA2, WPA - PSK encryption. I found this info on the Intel site. You should also check it.

  But as I said above, I m not 100% sure about the Wlan card. To my knowledge, several series of laptops come with different hardware configuration. This means that different wireless network cards can be used in notebook.

• Unable to play the game because Direct 3D Acceleration: not available.

  Hello

  Im having trouble getting my Phantasy Star Online BB work because of Direct 3D acceleration isn't only not available. (?)
  Ive tried all the patches from Microsoft suggests, but non have seemed to work. Ive also tried updating drivers, even if I may not be good?
  When I dxdiag it gives me:

  DirectDraw acceleration: enabled
  Direct 3D acceleration: not available
  AGP Texture acceleration: Not available

  If all goes well there is just something simple I'm looking for.

  Thank you.

  Hi Aquariusjp3,

  I suggest you to follow the steps in the link below and see if it has a fix for your problem. Let us know if any of the methods listed in the help link

  http://support.Microsoft.com/kb/191660

  Concerning
  Varun j: MICROSOFT SUPPORT

• How can I set up a Hotspot of Wifi Tethering & Wifi Direct?

  I have been using internet sources, but now I want to share my HP Envy M6 n012dx TouchSmart via Wifi Hotspot internet... So how can I set up a Wifi Hotspot Tethering connection so that other devices can stick as an internet me leech?
  Also, I want to set up the Wifi Direct file sharing with my phone...
  I tired everything to my knowledge... I even installed Intel PROSet/Wireless Software Tools too for Wifi HotSpot, but it does not work, either...

  Furthermore, I use Intel Dual Band Wireless-AC 3160...

  Please help me!
  Thank you...

  Problem solved.

  Thanks HP!

• Unable to send anything by using the wifi-direct

  Hello

  I bought the sony led tv rear 2 days that I want to share files using the wifi-direct, I have the wifi direct on my TV as well as on my smart phone as I have sony xperia z1. the two devices are connected succssfully but I'm still not able to send any file using the wifi-direct .i was tempted to send aid to throw option and office 7 also the instructions of customercare people but then also I am not able to send.can anyone please help me in this.

  Thank you

  Tarun mehrotra

  
  

• After hybernation, all usb and wifi mobile devices does not work

  Original title: Hybernation question
  After hybernation, all usb and wifi mobile devices does not work. Similarly, it is not stop as well. I turn off the power to the network option all usb hubs. Problem however still closes. Please suggest. I have Windows XP Sp3 installed. All the drivers and the windows update is up to date.

  Hi Mirza.Shanawazbaig,

  1. what happens when you connect any USB device to the computer, or trying to shut down the computer after hibernation?

  2. do you have security software installed on the computer?

  3. did you of recent changes on the computer?

  4 when was the last time it was working fine?

  Method 1

  See the below Microsoft article and try the steps mentioned, check if it helps.

  Peripheral USB is not recognized when you attach it immediately after that your Windows XP computer comes out of standby or hibernation

  http://support.Microsoft.com/kb/871233

  Method 2

  I suggest that you download and install the updated driver for the network adapters and display on the computer by visiting the card manufacturer or computer manufacturer website manually.

  How to manage devices in Windows XP

  http://support.Microsoft.com/kb/283658