Tmadmin TSAM missing on provided Oracle virtualbox image controls

Similar Questions

• How to install XP on an Acer laptop with Oracle VirtualBox

  I try to install XP Home edition on my Acer 2301 XC Travelmate via Oracle VirtualBox, as a virtual machine under Linux Mint 13. My goal is to install a few programs Windows XP on the Acer that not settle with 'Wine' of Linux emulator, for example Adobe Creative Suite 5.

  However, I think that the original XP came with the Acer discs are not really bootable - they are more recovery. There were two disks that came with the Acer (see photo). Is there a way to extract an ISO bootable disk #1 image? Or I have to download a file appropriate?

  Specs below:

  System: Host: Acer Kernel: 3.2.0 - 23-generic i686 (32 bit, gcc: 4.6.3)
  Office: Xfce 4.8.3 (Gtk 2.24.10) Distro: Linux Mint 13 Maya
  Machine: System: product Acer (portable): version TravelMate 2300: Rev 1
  Motherboard: Acer model: TravelMate 2300 version: Rev 1.0 Bios: ACER version: 3 a 07 date: 03/08/2004
  CPU: Intel Celeron M (UP-) kernel cache: 512 KB flags: (sse, sse2) bmips: 2597.68 clocked at 1298,840 MHz
  Graphic: Map: bus Intel 82852 / 855GM Integrated Graphics Device ID: 00:02.0
  X.Org: 1.11.3 drivers: intel (unloaded: fbdev, vesa) resolution: [email protected]
  GLX Renderer: Mesa DRI Intel 852GM/855GM x 86/MMX/SSE2 GLX Version: 1.3 Mesa 8.0.4 rendered live: No.
  Audio: Map: Intel 82801DB/DBL/DBM (ICH4/ICH4-L/ICH4-M) AC 97 Audio Controller driver: snd_intel8x0 ports: 1 c 00 18 c 0 bus - ID: 00:1f.5
  Sound: Advanced Linux Sound Architecture worm: 1.0.24
  Network: Map-1: Broadcom BCM4401 100Base-T pilot: b44 worm: bus 2.0 - ID: 02:02.0
  Drives: HDD total size: 137.4 GB (5.3% used) 1: / dev/sda SAMSUNG_HM160HC 137.4 GB
  Score: ID: / size: 127G used: 6.9 G (6%) fs: ext4 ID: swap-1 size: 1.59 GB used: 0.00 GB (0%) fs: swap
  Types of sensors: temperature of the system: processor: 53,0 C mobo: n/d
  (In rpm) fan speeds: cpu: n/d

  Info: Process: 132 Uptime: 38 min memory: 232.3/1490.7MB Runlevel: 2 CCG sys: 4.6.3 customer: inxi Shell: 1.7.33

  

  With Recovery of Acer for XP disc 1 reinstall up to 80-90%; After that ends in Acer Disk 2, the resettlement.

  You have a line sliding % you showing progression, which does not disappear from the screen when changing the discs after the Acer request that.

  And I speak from experience. You do not own an Acer recovery disk Bootable Disk.

  Acer has changed their recovery process of XP to the way they do in Vista.

  .

• Missing screws in the 3D 2010 image control?

  Hey everybody,

  I tried to follow this guide to the developer for visualization of Labviews functions:

  http://zone.NI.com/DevZone/CDA/tut/p/ID/7664

  I discovered that many screws shown here for 3D picture control are not available for (free) module in Labview 2010, even with the control and simulation tool. What is the case for other users?

  Examples of 3D picture control screws that I can't find in Labview 2010 block diagram functions are:

  'building of toroid.vi '.

  'create model.vi '.

  'Add a material.vi '.

  'Create transform.vi '.

  'Add a model.vi '.

  'create camera.vi '.

  «camera look at.vi»

  'create positional light.vi '.

  "make scene.vi".

  "to scene.vi".

  However, I can find the following screw:

  Geometry menu

  'create cone.vi '.

  'create cylinder.vi '.

  'create box.vi '.

  'create the height field.vi '.

  'create mesh.vi '.

  'create sphere.vi '.

  'create text.vi '.

  Object Menu

  'create object.vi '.

  'find the object.vi '.

  Transformations menu

  "to rotation.vi".

  "set rotation.vi".

  "rotation object.vi.

  "to scale.vi".

  "set scale.vi".

  "Object.vi scale".

  "to translation.vi".

  "set translation.vi".

  "translate object.vi.

  'clear the transformation.vi '.

  Menu of aid

  "color change.vi".

  "configuration window.vi".

  'create a clip plane.vi '.

  'texture.vi '.

  "new light.vi".

  "sensor mapping.vi.

  File loading menu

  «load ASE geometry.vi»

  'load the file.vi vrml ".

  "load STL geometry.vi".

  So my question is why can't I access the first list of the screws in 2010, are hidden with screws again features somehow? Or am I missing a library or where these functions abandoned for the 2010 version? If they have been abandoned, is it possible to build a scene and drawing from scratch in the 2010 version?

  Thank you very much!

  Hello

  Control of the 3D image is natively available for LabVIEW 2010. The question that you are running is because you try to open a VI that uses the first NOR-Labs 3D Picture Control, which was replaced by the native 3D image control. These functions are "obsolete" and manually replace your code with new API of navigation. You can also try using the old Toolbox, but keep in mind that this is not supported:

  http://zone.NI.com/DevZone/CDA/tut/p/ID/4411

  Examples of the new API is located in:

  C:\Program NIUninstaller Instruments\LabVIEW 2010\examples\picture\3D Picture Control

  and you should be able to find most of the VI need to change your old Toolbox to the new.

  I hope this helps...

• When I installed Windows Vista Ultimate oracle virtualbox has stopped working?

  I use Windows Vista Ultimate ISO in Oracle Virtualbox but when I install Windows Vista Ultimate Edition, Oracle VirtualBox is stopped working,:(, que dois_je faire?) my other operating systems in Oracle Virtualbox is very well.

  Hi Obito,

  The question you posted would be better suited on the Oracle Forums.

  http://www.Oracle.com/technetwork/Server-storage/VirtualBox/community/index.html

  https://www.VirtualBox.org/wiki/community

  Let us know if you have other questions about Windows in the future. We will be happy to help you.

• I can run oracle virtualbox Windows 8 pro Virtualization software built in will not load the VM I want to run.

  Hi all I was wondering if oracle virtualbox runs on windows 8 pro 64 bit, I would use it instead of using the built in one that came with windows, as I want to run the tails of https://tails.boum.org/ in a virtual machine and it is not supported by the built in Hyper-V on windows 8. but I don't want to goof Windows by installing another virtual software, so I need to know if it will work until I do it.

  Hi all I was wondering if oracle virtualbox runs on windows 8 pro 64 bit, I would use it instead of using the built in one that came with windows, as I want to run the tails of https://tails.boum.org/ in a virtual machine and it is not supported by the built in Hyper-V on windows 8. but I don't want to goof Windows by installing another virtual software, so I need to know if it will work until I do it.

  Hello

  Compatibility is the responsibility of the developer.

  According to the following Web site, Version 4.2 of Oracle Virtualbox is compatible with Windows 8.

  Support Oracle VM VirtualBox:

  http://www.Oracle.com/technetwork/Server-storage/VirtualBox/support/index.html

  Concerning

• Can't see to provide Oracle Data Wizard EF

  Hello

  I searched and some information about this problem, but does not can solve my problem.

  I have Visual Studio 64-bit and 64-bit ODAC 2012 and can't see to provide Oracle Data Wizard EF. I can connect my Oracle DB on Server Explorer.  I have to install ODAC developer tool? I think that it is available only 32 bits. I installed but began to get the GOLD-12154error code.

  Are you sure vs2012 is 64-bit?  I was under the impression that he was still only 32-bit (even when installed on a 64-bit machine).

  Visual studio 2012 pro - any version of 64-bit on msdn?

  Assuming that it is 32-bit, you must have 32 bit ODP/ODT installed.    12154 simply means that the client could not find the TNSNames.ora entry you specified.  Assuming that you have added a 32-bit client, you need to install tnsnames.ora in that House as well, as is unaware of the House of 64-bit.

  It will be useful,

  Greg

• Oracle Virtualbox

  Hello
  
  I have installed Oracle Virtualbox and created Windows 8 Pro 64 bit on my 64-bit windows machine 7. Now I want to install oracle 11 g 2 on Windows 8, but when I inserted my dvd on dvd rom, it shows all the files and folders of my dvd manifesting in the host (Windows 7). Does OK no problem, I will copy and two stick 11 GR 2 files on another dvd zip and then you try to install. But here are my questions:
  
  1. why windows 8 is not showing all the files and folder in virtual environment? (Issue not an Oracle, but if someone can help)
  2. when I checked the IP address of the virtual machine windows 8, his IP address is different for example something 10.0.2.15 although my host IP is something like 196.168.X.Y. So my question is how connectivity will happen between two databases of two different networks?
  
  Thank you.

  You will need to search by OS

  For Linux - http://docs.oracle.com/cd/E11882_01/install.112/e24321/pre_install.htm#CIHFICFD
  For Windows - http://docs.oracle.com/cd/E11882_01/install.112/e24186/reqs.htm#CHDHGGFE
  For Solaris - http://docs.oracle.com/cd/E11882_01/install.112/e24346/pre_install.htm#CIHFICFD
  For HP - UX - http://docs.oracle.com/cd/E11882_01/install.112/e24336/pre_install.htm#CIHFICFD
  For AIX - http://docs.oracle.com/cd/E11882_01/install.112/e24332/pre_install.htm#CIHFICFD

  HTH
  Srini

• Oracle VM Installationsur OEL5.2(32bit) on Oracle Virtualbox

  HII,
  I have an oracle VM model Installationsur oracle Virtualbox... MY VM and oracle Virtualbox are 32-bit and my host operating system which is Windows XP is 32-bit. I installed OEL5.2 (32-bit) on the oracle VM... SO I need your help on how to proceed with him.

  Unlcear as to what help you are demanding - if it's related VM, post pl in the VM forums - http://forums.oracle.com/forums/category.jspa?categoryID=305

  HTH
  Srini

• How can I programmatically draw new circles on an image control

  Hi, I'm fairly new LV and programming in general. I'm creating a program to get better. In this program, I have balls bouncing around on an image control. I use a table to keep track of the ball position (x, y) and the other to follow their speed. I want that whenever a ball reaches the border of the image, it splits into 2 balls. My problem is that I can't find a way to programmatically add these new balls for each draw circle screw must be serialy connected and then drawn on the image. What Miss me?

  You need to iterate over your table of bullets.  This means that the use of automatic indexation.  Now, you have no reason of wire with a value of N in the loop For.  And wiring of this value to the array Index function gives you invalid data it's either nothing, or the ball even if it exists in the table.

  I cleaned up a few other things in your code.

  1 cancel the function.  No need to multiply by-1.

  An array of Index 2.  It is expandable.  Drag the bottom border down.

  Your next bit of code to add would be where you decide to add another ball and put it in the Position and speed tables.

• the protection of the KING region in the image control.

  I use the return on investment on an image rectangle.

  As you well know, the KING can move or change the size by clicking and moving the mouse.

  But when the user clicks a position outside the KING, the current KING will reset and disappeared from the image control.

  Is there an idea on how to get information about the event or property to protect the KING?

  (Region KING detects the manipulation of the mouse event).

  I just wanted to keep, move or translate the present KING with the handling of the mouse.

  My application must have an entry a consistent ROI in real time.

  labmaster.

  I just put extra code to check if the current KING is valid or not to cash the size of the table of the global rectangle.

  Invalid KING means no size of table or the same position of x 1 and x 2 (for y, the same thing.) of the rectangle.

  I know this isn't a perfect way to keep the KING, but it is OK for me virtually.

  labmaster

• Set the image of the 2d image control

  I do a few installers of pallet for ease of distribution for some libraries that I wrote. I'm following the example of screw (search finder example "palette API").

  I feel a certain sense of frustration by defining the new icon from the palette; the constant of the icon is a 2d image control, but I can't find a way to put my picture in there, and I can't put it programmatically as the image 2d screw control let me just draw shapes in there.

  Oh for a constant of comics, a little unusual, but just for the heck of it.

  (1) unpack attachment and save to disk.

  (2) If you use open LV10 photo Constant_Tree.vi or mass compile directory.

  (3) drag the file image Constant.xnode your DB.

  (4) drag a PNG/JPG/BMP file to the constant and take advantage of the results

  (5) right-click to "Flatten" to a constant of the normal image if you want to use the VI on a machine without this XNode.

  (6) If you wish, add photo Constant.xnode to your Palette, be sure to select all the files so that the .xnode files are visible when you add a VI.

  Yet, you don't want your users to be mucking with the cover and not the block diagram?

• property of the mouse to the image control

  In LV 8.5 I noticed that if you reset your image to the default control (using the menu drop-down), the position property of the mouse no longer works, it will always return 0.0 no matter where the mouse is in control.  You must destroy and recreate your image control to fix right here.

  Perhaps this problem has been fixed in later versions of LV but I didn't know any documentation of the present.

  Good afternoon Garvacious,.

  When you say that the pop-up menu, I guess you want to tell the menu that is displayed if you right-click on the control.

  I just tried this in LabVIEW 8.6.1.  My position of mouse cursor reads 0.0 when the mouse is over the control and -1, -1 when the mouse is not over the control.  It is a bug.  I have filed the appropriate internal documentation (Corrective Action Request #167102), while R & D is aware of the issue.

  Thanks for letting us know about this behavior.  I'm sorry for any inconveniencce this bug you has done.

• marquee selection in the drawing image control

  I would like a vi that draw a marquee selection with the mouse in a control program image.

  This works so far if the user begins to drag inside the image control. The code is actually robust against

  start the image and entering again. Unfortunately this isn't the case if someone starts to slip outside

  peak control. then drags succeeding is arrested after the mouse moving a few pixels (about 1 to 10) and the

  rect selection gets fixed.

  No idea what could be wrong with the vi? Thank you!

  Your problem is with the fact that you have a structure of the event inside the other. This is generally a no-no and should be mentioned in the help (there is a warnings section).

  Specifically, the structure is part to begin to get events when the VI goes into run mode. This means that from then on, the internal structure will start enqueueing mouse all events on the image, so that when you start outside and go inside, structure remembers this event, but won't have to deal with until he actually runs. When she is not running (because there was a supported external mouse event), it will load the mouse previous event immediately.

  The basic solution is to use a unique event structure. You can use a cluster and a registry change to keep state data and don't forget what state you're in, if you need a timeout, etc., so that you know how to respond to each event.

• 3D image control does not display the full image.

  I'm having a problem with the control of 3D image not showing my entire 3D model.

  At first, I thought it was 'FOG', but when I put the SceneObject Fog.Function to 'No. Fog' he has no effect.

  I tried several settings, but I can't seem to find anything that affects what I'm looking for.

  I included some photos to show what it is I'm looking for.

  If I Zoom in control of the 3D image, I see more of the image in the background.

  I don't know if this is a limitation of the 3D image control or a setting I can change.

  It seems to be your plan of demarcation.

  I forgot how to set it up, but there is a property somewhere node that defines a cup for youi view plan implemented.  There might be a function of the camera, I'm not quite sure...

  EDIT: Found, is as follows:

  Note  To prevent objects 3D appear deformed, avoid the scaling of items not in the plans of delimitation. Near demarcation plan, which defines the nearest plan of the Viewer, the default value is 0 units. The extreme demarcation plan, which defines the demarcation plan further from the Viewer, the default value is 10000 units. You can use the Projectionerspective method to set the values for the plans of delimitation by program

• You can programmatically change a border/frame image control

  In a neutral way of the platform programmatically change a border/frame image control