TMS - add some unmanaged endpoints

Similar Questions

• How can I create a link or an installer that will open the bookmarks somebody bar and add some bookmarks?

  The goal is to embed a link in a word which, when clicked, opens the bookmarks bar and adds some bookmarks in the document. Another option would be that the link create icons from desktop to Web sites. The main deal breaker is we do not want to change the registry for this. All creative solutions are welcome.

  Thank you

  If it's for users as a whole and not in a given organization, forget the idea of profile, that would be much too intrusive.

  As noted by cor - el, an extension would have privileges to perform these changes. Some resources on developing extensions, since it is beyond the scope of this forum:

  • https://developer.Mozilla.org/Add-ons
  • https://forums.Mozilla.org/viewforum.php?f=7
  • http://forums.mozillazine.org/viewforum.php?f=19

• Firefox won't let me add some addons

  I am trying to add some addons and it wont let me add any of them it keeps telling me that they are corrupt please help me with this problem

  Hi mellyorajackson1967,

  first of all check them that your selected addons are not on this list: https://addons.mozilla.org/en-US/firefox/blocked/
  If in the list, then Firefox will block the installation and displays an appropriate message. If this is the case, you should check to see if there is an updated version of the add-on you were trying to install.

  You can find more information here: Add-ons that cause security problems or stability are put on a block list

• How can I create a new folder and add some choose another folder

  How can I create a new folder and add some pictures a different folder?

  Click Start-> computer.  Navigate to where you want to create the new folder.  Then, hold down the ALT key and press F.  Point again-> file and click folder.  Now, you have created the folder if you need to name it.  Type the name you want to give the file and press ENTER.  Now you have the new folder with the name you gave it.  Use him copy / paste to copy the images to the new folder.

  Good luck.

• PDF/A, when I have a standard PDF file and add some text to it, and then save as PDF/A, there is an error.  Any ideas?

  PDF/A, when I have a standard PDF file and add some text to it, and then save as PDF/A, there is an error.  Any ideas?

  Preflight check should give you an idea of the problem. It may be that the file must be flattened before attempting the conversion. Not all aspects of a PDF file can be converted to PDF/A.

• TMS - add a mistake to endpoint systems

  Hello

  I am trying to add endpoints Polycom HDX 7000 HD in my TMS, but I find some problems.

  (1) the hardware is recognized and connected, but in the end, the process of adding the following message is displayed:

  System already exists under a different system of TMS; Updated but not added to the file system.

  (2) locate the device with 'systems - Purge', I remove the material and try to add one more time, then the message:

  The start tag of 'meta' on the position of the 20 24 line does not match the end of "script" tag Line 22, position 7.

  I wonder if this equipment is stored in another place, in a different database, or I have to perform another procedure of

  exclude them completely the system.

  TMS version: 13.2.1

  Polycom Version: 3.0.3 (other material from the same version are added)

  Hello

  I found a bug on this. Here is the workaround

  Workaround solution:

  * Install endpoint HDX HDX 3.0.3.1 version at least

  Disable the setting "Select lists of Session" on the Polycom system (since the local interface, go to system > Admin settings > General settings > Security > security settings.) From the web interface, go to settings Admin > settings > Security > security settings)

  Please let me know if it worked.

  / Magnus

• TMS connects to the endpoints, but is not able to update

  Hi all

  I added our Tandberg profile on the MSDS management server endpoint and inserted the address of MSDS in the menus of the endpoint.

  In TMS I can view all the endpoints and their parameters, but when you change these settings I get the following error message: "could not update all the parameters. Details: hostAddress: [ip endpoint], description: GetDocument Failed. URL: http://[parameter] / putxml, base exception: the remote server returned an error: (417) Expectation Failed. »

  I tried several ways of connections and also did not find any solution on Cisco's Web site, so I hope you can help me. All devices, TMS and endpoints are in the same network.

  Thank you

  Ben

  First advice would be to upgrade your video network components... TMS12.1 and TC2.1.1 are quite old now! But if you want to try the solution I gave you, add the block at the end of the file, before in order to get something like this:

  ...

  ...

  ...

  Then, save the web.config file and a control box, run iisreset to restart the web server.

  And as said above, save a backup first!

• Help me understand how the scheduling TMS add participating really means.

  Hello

  I have a MSD working with the conductor and telepresence server.

  Can I create a reservation and incoming and outgoing calls to telepresence rooms without any problems.

  I n ' have local endpoint registered to my TMS so I add participant external tab, let's say I add 5 participants for H323 and SIP 5, so I have a meeting room with 10 reserved ports.

  During the call to the meeting instead that it will fall into these 10 port reservation, instead, he join as an adhoc appeal and now the meeting room extended to 11 participants with 1 connected and not connected 10.

  Why?

  Thanks in advance.

  NATT

  Seems to be a bug, CSCuv66300.

  Suggest you to contact your Account Manager and bring their to their attention so that they can raise this issue at the DRINK for you.  Clients more that draw attention to a particular request of the bug or development, the greater chance of it running.

• Cisco TMS - custom with MXP endpoint command problem

  Hi all

  I have try to disable the RCDO H264 with the TMS custom custom on all the endpoints (to solve a customer problem with lync2013)

  It works for the endpoint of C SERIES but does not work for the MXP endpoint.

  I have try it with this command:

  You have already encountered this problem?

  Do you know a solution?

  Thank you in advance

  Samy

  What version of TMS are you currently using?

  I have TMS 14.3.1, and if you are looking for in models of configuration in TMS under MXP, you should see the configuration item to disable this option for you.

  In any case...

  Off

  May be easier to use the TMS configuration, but the string above should work.

  I hope this helps.

  VR

  Patrick

• Add some "BOLD" text to the paragraph XML element

  I try to get the following result:

  < book > < p > now < "BOLD" > Hello Brown < / bold > cow < /p > < / book >

  That's what I have:

  var tagRoot = new XML ("< book >");

  p. tagRoot [0] [0] = "Hello now."

  .bold .p [0] tagRoot [0] = "brown";

  tagRoot [0] [0] of .p += "cow";

  Alert (tagRoot)

  For some reason, it transforms the supports of the "BOLD" tag in HTML entities.

  How can I get the above output?

  Thank you

  Kurtis

  var tagRoot = new XML("");
  tagRoot[0].p[0] = "hello now";
  tagRoot[0].p[0].bold = "brown";
  tagRoot[0].p[0].appendChild (" cow");
  alert(tagRoot.toXMLString())
  

  tagRoot [0] [0] of .p += 'cow' will first convert the content of the

  tag chain, then add the word "cow", then assign the new content channel to the

  tag.

• Cannot add the physical endpoint

  On the Infrastructure tab, try to add handlers of the UCS, anything that shows the descent down is "Cloud" 'Orchestration' and 'virtual '.

  I'm using the license key on Advanced vCloud, am I missing something here? I'm not in the default tenant.

  Hi tmactive,

  The key endpoints of vSphere allows now vCloud and vCD only.

• Internal error trying to add vCenter Orchestrator Endpoint

  Hi team,

  I am trying to configure vCAC 6.0 using the inbult Orchestrator 5.5.1 However when I try to add the vCO by accessing Home > Administration > Services Advacned > endpoints and click on the + adds vCenter Orchestrator plug-ins such as endpoints so that you can create service plans with Advanced Services Designer and publish the workflow as catalog items. I get the following error:

  Internal error An internal error has occurred. If the problem persists, contact your system administrator. When you contact your system administrator, use this reference: d6c92026

  I tried to connect to vCO by using the following accounts, but this has not helped to solve the problem:

  [email protected]

  [email protected]

  It seems to me that the error is always flagged only when I try to run the task above. Can someone please help me solve this problem?

  Thank you

  Arun-

  https://Twitter.com/arunpande

  http://highoncloud.blogspot.in/

  Virtualization VMware on NetApp

  8281 is the correct port. Probably, you must use Basic authentication and insert the credentials of the user that you use to sign in to the vCO client.

• Cannot add some JPEG files to the library (randomly)?

  Hello

  I just started using Lightroom, and I began by importing all the old/previous/existing images (same old in JPEG format). However, some of them will not add to the library. Lightroom just tells me something went wrong when you add it, but I can see perfectly in Windows Picture Viewer and Photoshop.

  Can it be a problem with corrupted metadata? What can I do to fix these images?

  If anyone need to watch one of these photos of issues, I can email you one.

  Thanks in advance! / Jonas

  Clvrmnky,

  you really should tyr jpgsnoop as well. :}

  Looks like there are a few fields not identified additional exif...

  Thus, if the PS open is very good, so I would save them as a new file.  Most likely, there are some corrupt headers that PS is a ignorant, but saving of PS in a new file will recreate the headers, and you'll proabably be able to import them.  At least, it's worth a try.  And you could lots with PS, isn't a lot of hassle if necessary.

  See you soon!

• Is it possible to add some offset on the scale of a graph Y when autoscale mode.

  Hi all

  I'm drawn on a graph of waveform autoscale mode. I want to be a disconnect on the side upper and lower scale Y. is it possible to implement this.

  Thanks in advance,

  Karine

  The only way that came to my mind is to autoscale by yourself:

  -Find the min and max (vi ready for this)

  -Add a percentage of the range min and max

  -Optionally constrain the new min, max accordingly to a round number (according to log (range))

  -Scale set with properties

  Another way:

  Add a plot with the same data (or only the min and max points) with transparent colors and multiply these data with 1. XX (xx percentage extra Beach)

• Add some blank discs to AX100

  I'm adding four new 500 GB drives (Dell) for my Ax100 fibre, in addition to the eight existing operating drives, 250 GB each. The capacity is now 2.6 to and the FLARE is at version 02.19.100.5.048. I wanted to make sure with you to add four blank diskettes, he must insert them into the empty slots, while the SAN device IS RUNNING. You can then create another virtual disk or expand the existing CT 2.6 to include the new mark 2 TB of storage. Thanks to you all.