TMS change Server 2003 to 2008/12
Hello
Could you please advice if we need to replace the old server with a new (setup IP, server name, FULL domain name will be the same). At what point should we physically replace the server and applies IP Configuration from the old server to the new?
Or better a new IP/servername?
Thks
Hello
Please check the following post
https://supportforums.Cisco.com/discussion/12243466/TMS-migration-Win200...
HTH
Manish
Tags: Cisco Support
Similar Questions
-
Tecra S10 - 10F - need Server 2003 or 2008 LAN driver
I'm looking for a driver lan for Toshiba S10 - 10F for Windows Server 2003 or 2008.
Or at least, I would like to know the model of network card.Thank you
Toshiba doesn't support an OS Server on laptops, so you will not find such a driver on the Toshiba site.
You can try to search for a driver on the site of the factory. As far as I know that the Tecra S10 has a Intel LAN card while you should search on the Intel site [www.intel.com]
In addition, you can try to use the XP Server 2003 driver and driver Vista for Server 2008. The two you can find on the Toshiba site:
http://EU.computers.Toshiba-Europe.com-online decision-making supported Downloads & => Download driversGood luck!
-
What product Vmware is the best for several Windows Server 2003 and 2008 implementation
Hi all
I am just wondering that if I installed VMware on Windows Server 2003 Standard Edition and Windows Server 2003 Enterprize edition on VMware I was able to use more Ram installed, our server have 48GB of Ram but Server 2003 Standard allows only 4 GB max to use, to save money, I was wondering just if I can use the way I mentioned above.
Looking at it, I think you have a misconception about the limitations of VMware, RAM and operating system. Your problem is that you see no more than 4 GB of RAM on your x 86 Server 2003 install? This is a limitation of the operating system - to use more RAM you need an operating system that can deal with the RAM.
If you install VMware Workstation on Windows Server 2003 standard x 86 edition then you will only be able to use the 4 GB of RAM, Windows Server 2003 Standard x 32 can process.
If you install VMware Workstation on Windows Server 2003 standard x 64 edition then you will be able to use the 32 GB of RAM that Windows Server 2003 Standard x 64 can process.
If you install VMware ESX, you can adjust your full 48GB of RAM and install multiple instances of Win 2003 Svr Standard, each of which can address 4 GB of your memory live available.
-
Named for the installation of the driver for Windows Server 2003 standard edition for the printer model HP OfficeJet 5610 all-in-one.
Hello
The HP Officejet 5610 compatible only with client operating systems, it is incompatible with any OS Server 2003 or 2008.
You can find the printer specs below:
http://support.HP.com/us-en/document/c00420495
Shlomi
-
Which laptop model can be installed in Windows Server 2003 and PIA?
People,
Hello. The PIA (Weblogic and Tuxedo and SQL Server) and the PeopleTools are compatible with Windows Server 2003 or 2008. But it is not compatible with Windows 7. Because my HP laptop is installed with Windows 7 and can not be installed on Windows Server 2003 or 2008, I need to buy another laptop to install Windows Server 2003 or 2008 PIA and PeopleTools.
I need to know what model of laptop computer can be installed on Windows Server 2003/2008 and double boots several operating systems. Everyone installs Windows Server 2003/2008 and PIA in any laptop? Please tell me the model of the laptop.
Thanks in advance.
LucyAny modern laptop with lots of RAM (> = 4 GB) and hard disk space, within capablities of 64-bit virtualization should be well.
Even if you have Windows 7 OS to host, you can still install a virtual machine software installable on top of your operating system (for example, VMWare), then install an operating system supported as a virtual machine (called guest operating system). You will work on this virtual machine, exactly as it was a server, waiting for your host what OS is also running, no need to dual-boot.Nicolas.
-
Server 2003/2008 drivers for Tecra M11 - 11J
Hello
I had to install Windows server 2003 on a laptop (don't ask) and cannot find a driver anywhere. Have tried all the windows drivers on the drivers page and had no luck.
Thought that I'd stick 2008 there to see if it automatically recognized but no luck there either.
Anyone know how I can get around this?
I also tried to figure out what model NIC is installed, so I can get the drivers directly from the manufacturer (Intel I guess), but Goggling it comes with anything.
Hello
> I had to install Windows server 2003 on a laptop (don't ask) and cannot find a driver anywhere
I guess you're meaning that the network driver.
Tecra M11 - 11J seems to support the * pilot Intel 82577LC * LAN.Maybe you could find the driver on the Intel page
-
Windows Server 2003 in a Windows 2008 file server environment
Dear all,
I would like to install windows 2003 server as a file server in Windows 2008 R2 domain.
I have windows 2012 standard R2 in the additional DC form.
Please advice me good measures implement the file server in our network.
Tony
E-mail address is removed from the privacy *.
Hello
Post your question in the TechNet Server Forums, as your question kindly is beyond the scope of these Forums.
http://social.technet.Microsoft.com/forums/WindowsServer/en-us/home?category=WindowsServer
See you soon.
-
Windows Server 2003 R2 vs. 2008 R2 vs. 2012 as a file server
I use Windows Server 2003 R2. We have about 100 PCs that are connected to this server and using the network connection. We are planning to upgrade to the latest version. While I was looking for the comparison between Windows Server 2003 R2, R2 2008 and 2012.
All items talk about new features like Hyper-V, Hyper v Replica, Active Directory, IIS etc. But I'm not using one of these. I mainly use it as a file server. So, I need to know the comparison of features related to it.
How are the 3 versions different server?
I heard that data deduplication is main feture of windows server 2012.Does it only reduce the file size when it is in drive? Or he gets advantage for network traffic when he copied the complete network of another way? Fact that these data are supported in windows XP in network
Hello
Support for Windows Server is not provided in these forums. On the other hand, it please repost your question in the relevant Microsoft TechNet forum here:
http://social.technet.microsoft.com/Forums/en-us/category/windowsserver .
Thank you. :)
-
How to change the language of the Server 2003 terminal server USER profile
Hello
I need to change the language on the terminal user profiles server of the United States to the United Kingdom, the server has been modified, of the United States, to the United Kingdom, but it has not replicated to existing users who are still all see as if it were in the United States (date, etc.). This also applies to Office 2003. If connected as that administrator, that he is in full mode (server language and office area) UK, can anyone help?Thank you very muchJoshHello VILT,.
Microsoft Communities is consumer related questions about Windows 8, Windows 7, Windows Vista and Windows XP. For any question on the terminal server Windows Server 2003 server, it would be best to ask your question on the TechNet forum.
Click here to transfer your question in TechNet for Windows Server 2003 (Terminal Server Services) remote desktop forum.
They will be able to solve your problem.
Thank you
Marilyn
-
Can I transfer licenses CAL (NO Terminal Service) of the 2003 server to a new Server 2008?
We are to modernize a client from an old Server 2003 to new hardware Server 2008.I was wondering if there re 50 CAL to buy for them, we bought or if we can transfer those from the old server.The former will be decommissioned and formatted.Please note that I don't want to transfer the CAL of Terminal Server service but rather access normal Server CALPost in the Windows Server Forums:
http://social.technet.Microsoft.com/forums/en-us/category/WindowsServer/ -
Hello world
I use windows server 2003, enterprise edition 64-bit. I changed the hard drive of one single processor to others. and now I face problem of activation. I'm not able to enter my old key to activate it. and its asking me to connect on internet.i must sign my user name and password to use internet.
If anyone can suggest me how to get activated with over to connect to the internet and using the same old key for the hardware has changed...
Hello
1A, that the version of Windows is OEM copy?
Check out this link to validate windows.
I suggest you to validate windows and it would automatically activate the copy of Windows.
What is the validation, and how does it work?
http://Windows.Microsoft.com/en-us/Windows/help/genuine/what-is-validation
I hope this helps.
-
Go Win Storage Server 2003 to Win storage server 2008?
I have a nf600 with windows storage server 2003. Can I upgrade to server windows storage server 2008?
Thank you!
Hello
Your question of Windows Server is more complex than what is generally answered in the Microsoft Answers forums. It is better suited for the IT Pro TechNet public. Please post your question in the Windows Server Forums. You can follow the link to your question:
http://social.technet.Microsoft.com/forums/en/category/WindowsServer/
-
After changing the password in windows server 2003, when the new password take effect?
Hello
In dealing with the problem with Windows Server 2003, it would be preferable to send the same in the Technet community. http://social.technet.Microsoft.com/forums/en-us/smallbusinessserver/threads
Hope the information is useful.
-
run adprep on Server 2003 dc, but server 2008 does not recognize he ran on Server 2003
Try to add a Server 2008 as a domain controller in a domain of 2003 server. Run adprep on the 2003 server, then ran dcpromo on Server 2008. got an error saying run adprep on Server 2008. following error was that adprep can only be run on a domain controller. checked the 2003 Server & adprep has already been run on this. receive errors. How can I get the Server 2008 see that adprep has already been run on Server 2003?
Hello
Your question is more complex than what is generally answered in the Microsoft Answers forums. It is better suited for the IT Pro TechNet public. Please post your question in the TechNet Windows 7 networking forum.
-
How to downgrade windows server 2008 r2 for Server 2003?
I bought windows Server 2008 but license my workplace always use Windows server 2003
How can I demote the Server 2008, Server 2003
Give step by step instructions and all necessary meansThank you for visiting the Microsoft Answers site. The question you have posted is related to Windows Server 2003 / 2008 and would be better suited to the Windows Server TechCenter community. Please visit the link below to find a community that will support what ask you:
http://social.technet.Microsoft.com/forums/en-us/winservergen/threads
Maybe you are looking for
-
Has no way to copy or export of username, passwords, or Web site in the Firefox password manager.
-
Re: Completely blank screen on Satellite L500D - 16 M
Recently replaced screen on Satellite L500D - 16 M and worked perfectly. Closed the lid but has not closed laptop. Next day, totally blank screen. Removed the battery, power off and all used to self-help, all to nothing does not. Have you tried the l
-
IM afraid myVista is drunk Got the endless loop... I tried restore previously update... hangs just "complete the installation.So did not workCommand prompt I tried to change the name Pending.xml... can not cd c:/windows/winsxs...just remains in x: /.
-
defragmenting continues.
Once I have start the disk defragmentation process runs continuously, repeating again and again. This makes the machine very slow. How can I fix it?
-
I'm working on an application that needs to send SMS messages. Is there a way to make the Simulator say you if you sent a text? How do you know when it works? Thank you