Endless update loop

Similar Questions

• Win Vista update loop

  My computer is stuck on windows update 3 with a continuous loop. Computer not start in any safe mode or respond to restore the last known good configuation. Repair your computer will produce all the restore points. I tried to install the vista installation disc, but the computer seems to ignore the drive and return to the update loop 3. The screen with the endless loop will be turned on for a short period and then stop and restart and return to the same screen and windows update 3 loop. Nothing seems to work.

  Hello

  Check if this link is useful.

  "Configuration of the Windows updates failed. Restoration of the changes. Do not turn off your computer"error when you try to install Windows updates

  https://support.Microsoft.com/en-us/KB/949358

• Update loop

  Help, please. I have vista and a windows automatic update is a loop. I am really computer illiterate. can someone explain to me what to do in easy words.

  I don't have the original vista disc such that it has been preloaded on laptop when I got it.

  I have 3 drives that I need to have copied when I got my laptop. the latter I called recovery of 1, 2 and FIPS appdrv 1. I don't know what they are for.

  Help, please.

  lilyg01,
  Please give us some details about your problem.  You say you have 'an update loop' so what exactly do you mean by that?  Are you getting the same update presented whenever you start or it is actually trying to install an update every time that you start?  This error message do you receive?  What is the update you get?

  If you are able to boot to your desktop, you can try this: reset Windows Update components

  Mike - Engineer Support Microsoft Answers
  Visit our Microsoft answers feedback Forum and let us know what you think.

• VISTA UPDATE LOOP

  I also have the vista update loop just like everybody... how frustrating on mine, is that I don't have a CD/dvd drive to put the cd... and other fixes do not work. These are the only options in the startup options and none of them works

  http://I52.Photobucket.com/albums/G33/rakcs/DSC00003.jpg

  so I thought to install XP via USB stick bootable. but I can't make it work. not even sure if I can install xp without vista im cleaning.
  I also thought that the delivery of the missing update through bootable usb... but I'm not sure if this is possible... someone has it already tried? anyone with the same situation as mine? pls help... Thank you...

  You copy the image of the ISO file on the disk, Boot from the disk you...

  If the Bios of your laptop can't boot from USB: NO, you can not start him.

  You only know if your Bios/motherboard supports the boot from USB, or not.

  Now, you went beyond the scope of these Vista Help Forums.

  Now, you also have a hardware problem.

  Most portable computers have a DVD player; especially if they have Vista preinstalled.

  I suggest that you get your repaired/replaced DVD drive, or check the manual of your laptop to see if your card motherboard/Bios support boot from USB.

  When you sort this possibility, try a repair of the boot with the link "ISO file/make a disc of ' I you provided.

  If this does not work, reinstall Vista.

  http://compreviews.about.com/od/support/p/Averatec.htm

  Averatec contact what to do about starting from the repair disks.

  Good luck with it.

  See you soon. Mick Murphy - Microsoft partner

• WIN8-update - loop

  I have a Sony VAIO, that I've recently returned to factory with Windows 8 as my operating system. (The story: I have problems with Win10 I could not resolve so I started on.) As expected, my computer began to go through a series of updates whenever I have it prompted to shutdown or restart. The last time that happened that he ran into a kind of 'Update loop'. It restarts and comes eventually to update blue screen where it says "configuring Windows updates", but he never went from 72 percent before it restarts the computer again. He did this for several hours now (exactly 7 hours). I can't seem to stop, and he has not moved beyond 72%.

  Things that I tried after reading several Microsoft supported the Articles/items:

  1. the startup in the BIOS using F-8, F-12, Maj, Maj + F-8, F-12

  2. stop the update process: by pressing the delete key, escape key, Shift + X, Windows key + X / C,.

  None of them have done anything... He keeps just reboot.

  Thoughts?

  Thanks for your replies MN. I managed to get out of the loop of reboot and will implement your suggestions that I update it.

• El Capitan 10.11.4 updated: loop with "unexpected launchd sigkill.

  MacBook Pro 5.2 mid 2009 with 8 GB memory updated to the version of El Capitan 10.11.4 from the app store.

  Starting after the initial installation stage goes into a loop of reboot with the message above appears black behind the initial grey screen.

  Reinstalled the previous operating system and tried the 10.11.4 install again - same result.

  I noticed several instances of this problem on various hardware systems reported on other web sites.  What would be the right way to collect useful diagnostic information?

  Thanks for any help.

  Two iMacs does not start after the 10.11.4 update

• AT300SE - boot after update loop

  After the last update, my Tablet AT300se not start.
  Someone please provide me with the Stock ROM?

  I am in India now and I can't find any toshiba tablet in India service center.

  Have you tried the hard reset?
  To do this press hold * power button & vol. + button *.
  Then navigate to reset the option.

  Usually, this should help reduce the loop process in case this is not possible, I think that the only service would be able to help :(

• 2008-2009 iMac and vertical lines endless boot loop

  My father has an iMac from 2008-2009 and it has been fine.

  However yesterday it suddenly developed vertical lines on the screen (see below). These lines seem to be 'above' the Apple logo. Unfortunately I can not access the info from the computer

  The Mac is stuck in an endless loop of startup where it never gets beyond the Apple logo and turn the circle loading.

  I started using the option key pressed and tried to the recovery for the boot partition. This again goes to the Apple logo and the rotating circle gray until he says: "If you want to continue in English press the return key" what I'm doing and then nothing (the circle stops spinning). Same thing happens when the safe boot mode.

  I also tried to boot from the recovery drive (separate USB) and nothing... Fortunately, I can access its backups like he always its data.

  I also tried the mode via Firewire to my laptop and disk target hard iMac mount (although the Firewire icon appears on the screen of the iMac).

  I also tried re-creation of the AMFR2 and MSC.

  My guess is that it's a failure of motherboard somewhere as it seems beyond normal graphics card. For some reason any my store does not have engineering appointments at the moment, so cannot take it.

  Is the consensus, that it is a dead iMac? Thank you

  

  (Note the "burrs" on screen is from my phone, not on the iMac!)

  Hi, Steve Hayes1,.

  I had one come in the other week with these lines - GPU issue. Replaced it and worked like a charm.

  With respect to the infinite loop, try to start from an external drive and load an operating system. Should I still do the endless loop?

  Kind regards

  BleverCastard.

• Update loop under Vi of hand / run multiple Instances

  Hey everybody,

  If I want to keep my code as modular as possible so that I can see any sub or VI.

  One of the SUB vi is permanently offices incase another output is detected. I don't want to make this mark on the main level because I don't want a huge loop in my main.vi and you won't worry about sending shift register valuse to my Subvi for him to function.

  Essentially, I have designed this subroutine Vi and am now trying to constantly be driven from a main.vi

  This hand is simply.

  Cluster of entry--> Sub VI

  Void VI retains a loop waiting for a change request action. Unfortuantely when I change the vale in main.vi the avlues in Subvi don't update. I guess that makes sense, in C, for example when you call Returns you need to wait until the end of the function call to update. Yet, as Labview is so strongly focused on taking SUB vi to do almost everything for you, I can't imagine labview is not able to update these values. I looked around and the answer seems to be global variables. I really don't want to use the because my application will become very big, but I'll use them if I need to.

  Unforunately, when I tried to use my global variable thing, it didn't work.

  1. global Var = Cluster

  2. it's in the Subvi both the main VI.

  3. when I run my code the global variable is not up-to-date on both front sides when I change one of them. I'm doing something wrong?

  A few comments.

  • You have not included the global variable
  • If you want to run multiple instances of the Subvi in parallel, it must be reentrant.
  • As the Subvi is interactive, it must be configured to display the front panel when it is called, otherwise there is no way to stop it ever.
  • All your time loops needed little expects. They have no need to turn as fast as the CPU allows, all other processes of hunger.
  • "Go to under control" is extremely complex and crawling with weird stuff like an ant farm.
  • • The shift register must be initialized to avoid surprises (but you probably don't have it all)
    • Your loop runs one time too many.
    • Avoid the stress points, such as the structure of the case.
    • You can replace this whole thing with for example a table of threshold, no need to loop. (see image below).

  

  Good luck!

• Windows Update loop, entered the code keyboard

  Windows Vista was stuck in the installation of update 3 of 3-100% restart loop, I did stop for a long time but my laptop just died forcing myself to try to resurrect this machine.

  I would try rename the pending.xml pending.old, and remove the keys from registry AdvancedInstallersNeedResolving and PendingXmlIdentifier

  My problem is when I open the command prompt that my keyboard before gives the wrong characters. CD c:\windows\winsxs becomes a series of questions and Greek characters like delta and sigma brands

  See if this sugesstion can help you:- http://support.Microsoft.com/kb/949358 >

• Configuration update loop - new

  I have s similar or the same problem that happened before on this forum, however the answers have not solved the problem. I can re - start the computer by using comments presuppose that I can connect to the computer from safe mode. I can't. It just goes back on the same loop. I tried the last known good configuration and that brings me to the loop immediately. In April, I noticed the same problem of a user. The Guy didn't come back to report on the success or not of the solution. I tried all the suggestions, but I can't get out of the loop and in any form of safe mode. F8 F2 & F11 give me the guests who in turn put me straight to square.
  How do to this problem and find the correct computer?
  Thanks in advance.

  I would recommend a repair Installation, because you can't get into your computer.
  If this does not work, you will need to perform a new installation.

  Repair facility:

  You can reinstall your copy of Vista while keeping your files, settings and programs by performing a repair install or an upgrade on the spot with the following steps: (Note: this does not always solve all the problems, especially if the corruption was caused by a 3rd party program or service, you may need to do a clean install) If this is not successful)

  <><><><><><><><><><><><>

  Please make sure that you backup all the important data before you continue. Please see: methods for backing up your files.

  Always make sure that you have the means to reinstall your programs, or by an installation disc or access to the installation files.

  <><><><><><><><><><><><>

  1. Insert the Windows installation disc in your computer's DVD or CD drive. You must start Windows installation while running your existing version of Windows.

  2. on the Install Windows page, click install now.

  3. on the get updates for installation page, we recommend getting the latest updates to help ensure a successful installation and to help protect your computer against security threats. You will need an Internet connection to get the installation updates.

  4. on the Type your product key for activation , we strongly recommend that you type your 25-character product key in order to avoid problems during activation.

  5. on the page Please read the terms of the license , if you accept the license terms, click I accept the terms of the license.

  6. to the which type of installation you want? page, click upgrade to begin the upgrade. You can see a compatibility report.

  7 follow the instructions.

  Note : If your installation disc doesn't include SP1, and you are updated, then you must uninstall it before proceeding with an update install. Start-> Control Panel-> programs-> see installed updates, then select Service Pack for Microsoft Windows and click on Uninstall.

  Note: Tit the following settings is reset by default:

  Its computer system

  Device drivers

  Visual effects

  Windows Mail

  Windows services

  If you notice missing files after the upgrade, look in the following folders:

  C:\Windows.old

  C:\$INPLACE.~TR

  C:\$WINDOWS.~Q

  These files can be eliminated with disk cleanup as "records destroyed by upgrade to Windows".

  Delete files using disk cleanup

  Martin
  Microsoft Answers Support Engineer
  Visit our Microsoft answers feedback Forum and let us know what you think

• Stuck on the XP Update loop

  When I turned off my computer, I'm stuck on a loop of "windows is to install the update 1 1...» do not stop computer... "until I have to turn off manually. It happened the last 3 times I tried to stop. Can someone please? (XP)

  Hello
   
  Method 1

  Reset windows update components and then try to install the updates and see if the installation is complete. Open the link below and click on the cue, he touches.

  http://support.Microsoft.com/kb/971058

  If this is not enough, you try the next method.

  Method 2

  Try to download and install the updates manually. Visit the link and enter the KB number for updates and download the same.

  http://www.Microsoft.com/downloads/en/default.aspx

  All the steps suggested to try the link below.

  http://support.Microsoft.com/kb/822798

  Try these steps and let us know the answer.

  Thank you, and in what concerns:
  I. Suuresh Kumar-Microsoft Support.
  Visit our Microsoft answers feedback Forum and let us know what you think.

• Windows Update loop 3 3

  After automatic updates system shows 3 3 0% windows and goes into a loop by restarting itself. I have re-installed Vista, but as soon as I shut down and restart the system, the same problem again. Any suggestions?

  Hello

  I guess that part of the question could be a driver which is really old or similar should not be loaded.

  This exit Windows updates on (after you have access) and stop the updates of the driver to load.

  How to disable automatic driver Installation in Windows Vista - drivers
  http://www.AddictiveTips.com/Windows-Tips/how-to-disable-automatic-driver-installation-in-Windows-Vista/
  http://TechNet.Microsoft.com/en-us/library/cc730606 (WS.10) .aspx

  Once you are in Windows again, I'd run the Reset here as a precaution.

  How to reset the Windows Update components?
  http://support.Microsoft.com/kb/971058

  ---------------------------------------------------

  You can use the solutions in this KB - 3 methods and I listed a little help for them below

  The update is not installed successfully, you receive a message, and the computer restarts when you try to
  install an update in Windows Vista
  http://support.Microsoft.com/kb/949358

  Method 1: Start Windows Vista with the Windows installation media and use the repair feature

  How to do a startup repair in Vista
  http://www.Vistax64.com/tutorials/91467-startup-repair.html

  You can also do a safe mode startup repair to access the Recovery Options If you have them available
  or use the DVD as described above.

  This tells you how to access the System Recovery Options
  http://windowshelp.Microsoft.com/Windows/en-us/help/326b756b-1601-435e-99D0-1585439470351033.mspx

  Try recovery options Startup Repair

  How to do a startup repair
  http://www.Vistax64.com/tutorials/91467-startup-repair.html

  You can also do a restore of the system of starting with a Vista disk.

  Method 2: Start the system in safe mode and then use the system restore feature

  How to make a Vista system restore
  http://www.Vistax64.com/tutorials/76905-System-Restore-how.html

  Method 3: Rename the Pending.xml file, and then change the registry (this method is part of the advanced troubleshooting)

  See article below for that.

  You can use this method on the updates that have this problem.
  http://support.Microsoft.com/kb/949358

  Hide the update (click right - HIDE in the updates of Windows) and go to the Microsoft Download Center to download
  and install it.

  Microsoft Download Center
  http://www.Microsoft.com/downloads/en/default.aspx

  ------------------------------------------------------

  Once you are in Windows again, I'd run the Reset here as a precaution.

  How to reset the Windows Update components?
  http://support.Microsoft.com/kb/971058

  Hope this helps sort it out for you.
  Rob - bicycle - Mark Twain said it is good.

• Stuck in the update loop

  Recently I have got stuck in a loop of update of Vista, to do an update, in which he will update 3/3 0%, then stop start etc. I was able to fix and restore to an earlier point using my recovery disc and repair mode.

  Here's my question, how can I avoid this in the future while still making updates. This has happened a few times that I've corrected by removing the updates, I thought that may have caused the problem, and then on the day that the above problem happened.  Now I have a large number of updates, is there a way to fix this problem or am I rimmed? I do each update one by one, if it sticks back and remove it? Seems like a lot of work to keep it up to date.

  I could simply ignore the updates but that seems silly. Any help would be appreciated, thanks.

  It will take a little time to do it:

  Here's how to uninstall an update (or make your system restore), change your settings to find the problem of those who and how to hide an update.
  There is no easy way to do it, unfortunately:

  Click Start > right click on computer > properties > Windows updates down the lower left corner > updates installed in the lower left corner in the next window

  > then click the one that you don't want > uninstall will appear at the top > uninstall it.

  ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~

  In addition, on the page where you clicked "Installed updates", click on change settings at the top left corner it

  > Change update settings in the next page of AutoUpdate to "check for updates but let me choose etc" > OK ".

  When you take a look at pending updates, you can either download/install them one at the time, namely the update causing you problems.

  > or if you do not need an individual > right-click on > UAC prompt > hide it

  See you soon.

  Mick Murphy - Microsoft partner

• Microsoft Update loops XP Pro SP3

  I start Microsoft Update - "Checking to see if your computer has the latest version of Windows Update software" alternates with "looking for the latest versin of Windows Update software" that loops several times while the URL continues to grow, adding an extra & muopt = 1 to the end after each iteration to see what URL becomes after a few passes : http://update.microsoft.com/microsoftupdate/v6/default.aspx?ln=en-us&muopt=1&muopt=1&muopt=1&muopt=1&muopt=1& - Windows XP pro SP3 - ran Fixit, no help

  I've experienced this as well.

  Go to http://windowsupdate.microsoft.com and install the update mandatory. Once installed http://update.microsoft.com works again.