To access the properties of a file of sequence of labview

Similar Questions

• To access the properties of the controls from other mxml components

  Yet to learn Flex and if this question seems trival please bear with me.
  
  What I have to do is access the properties of a control in the file main mxlm, but the control is in a separate mxml file.
  
  The scenerio is that I have a checkbox in the chkbox.mxml file. I need to know the value of the selected property, so that it is accessible to me in the main mxml file where I use this property to determine how to navigate the application.
  
  Thank you

  Hmmm

  something like

  If (parentApplication.myCheckbox.selected == true) {}
  to do this
  }

  or even

  If (application. Application.myCheckbox.selected == true) {}
  to do this
  }

  does it work?

• Well confused. I use click on Favorites in the upper left corner of the screen. I can still but I can't access the properties of the bookmark

  I used to just right click on a bookmark of Bookmark menu in the upper left corner of the screen. Now when I right click on Favorites, I can't get any of the choice to highlight, they are subject, and nothing happens. But if I add bookmarks little star at the high right to help customize I can access an area of the one bookmark away. Seems that just suddenly happened. I like to use the left side of the screen, but cannot access the properties there. Any difficulty?

  Devil well, now, all is well, seems to set just after a reboot. So solved my problem all by my lonesome. Please disregard.

• When I click on properties in my tab of connection area I can't access the properties settings.

  Connection impossible access area properties

  When I click on properties in my tab of connection area I can't access the properties settings. I need to change the settings of ip address of my connection to the local network on my laptop

  Hello fazlurslemming,
  1. may I know why you must change the setting of IP address on your laptop?
  2. are you able to connect to the internet?
  3. what version of windows are you using?

  Visit the below link to find the steps to change the IP address on a windows 7 installed system:
  http://Windows.Microsoft.com/en-us/Windows7/change-TCP-IP-settings
  Post back with the State.

• access the properties of digital format

  I create digital controls/indicators on the fly.  Most of them should be displayed in hexadecimal.  However, I can't access the format properties that allow me to define that when I create the indicator/control using the new object VI VI.  I think that this happens because the numeric type is not digital (Strict) but rather just num.

  I say this because I realized that if I simply place a digital control on a façade, made a right click to create a reference, and then access the properties of the said reference, I have access to the properties of the format, I want to talk.  A compare/contrast below pic to show what I mean...

  

  So my thought then was, maybe I should change the style of the object I created to be digital digital type, but this style does not exist.  There are styles of digital data, but this is something completely different.

  So my question is, what style/class combo do I need to have a digital control that will allow me to specify the Format property?

  Thank you

  You need to do a digital Digital.

  

• Jpg file printing - windows cannot access the specified device, path, file

  Original title: I have a similar problem, I can open the jpg fine, I can't print it

  I have a similar problem, I open the jpg fine, I can't print it, permissions are fine. I get the same erorr-windows cannot access the specified device, path, file...

  Hi Janine.

  1. are you able to print documents?

  2. the problem occurs only with a particular image file?

  3. how the printer is connected to the computer?

  4. What is the brand and model of the computer and the printer?

  5. have you logged as administrator?

  Method 1:

  First of all, try to print a test page and check if it works:

  To print a test page

  http://www.Microsoft.com/resources/documentation/Windows/XP/all/proddocs/en-us/print_test_page.mspx?mfr=true

  Method 2:

  I suggest you check out the link to use the System File Checker tool (SFC) to troubleshoot missing or corrupted system files in Windows:

  Description of Windows XP and Windows Server 2003 System File Checker (Sfc.exe)

  Note: you must have the Windows XP disc to make the SFC scan.

  Method 3:

  I suggest you to turn off all third-party security software and the Windows Firewall and then try to print the file:

  How to change or remove a program in Windows XP

  http://support.Microsoft.com/kb/307895

  How can I turn on or turn off the firewall in Windows XP Service Pack 2 or later versions?

  http://support.Microsoft.com/kb/283673

  Note: run the computer without antivirus software or firewall is a potential threat to the computer; Be sure to activate security software after completing the troubleshooting steps and after identifying the problem.

  Let us know the results.

• "Unknown error" whenever I try to access the properties of the network connection

  Hi all

  whenever I try to access the properties of a network connection (e.g. via right click on 'Network'-> properties-> right click on a connection-> properties), type of connection according to what is, I get a message "Unknown error" box and I can't move forward.

  As a result, any setting of any network connection is not editable, more. For example, I wanted to force the IP of the local network of "assigned to DHCP" to "static" with an address fixed IP, but I can't.

  Another weird thing is that I even can't delete one of the existing network connections, even if there are a couple that are not in use for a long time...

  It should be noted that, apart from that, the network of connections work.

  What can cause this behavior, and that might be the way to solve the problem?

  I want to upgrade the system to SP3 but I am reluctant to take the plunge with such an "alive"... error
  As you may have already guessed, the system is running XP SP2.

  Thanks in advance,

  Concerning

  Yes, I am facing the same problem too. The error message says "an unexpected error has occurred." This problem started out with me a few weeks back and I was under the assumption that it was due to a virus attack. But even after a thorough cleaning session problem continues to exist.

  The problem - as mentioned above by the Bell, we can neither open the properties of a connection (i.e. Dial-up/LAN/WLAN), or remove or add a new connection. If you try to open the connection properties, all you get is the message "an unexpected error has occurred" and if you try to delete or add a connection - the system does not respond!

  Surely, this link worked for me. I hope it works for you Bell. Check it out.

  http://wdbuc.com/blog/2010/02/03/an-unexpected-error-occurred-when-you-right-click-on-a-network-connection-in-Windows-XP/

• "Windows cannot access the specified device or file. You can not have the appropriate permissions to access the item. "When you try to open a. EXE file.

  Windows cannot access the specified device or file. You can not have the appropriate permissions to access the item.

  Well, I was on my computer, I tried to open an exe file and I got this message

  Windows cannot access the specified device or file. You can not have the appropriate permissions to access the item.

  I have windows xp, anyone have an idea what to do?

  Hi Reaper14,

  ·         The question is limited to this particular .exe file?

  ·         You can open other files very well?

  If you are unable to open a .exe file, refer to the following article.

  Important This section, method, or task contains steps that tell you how to modify the registry. However, serious problems can occur if you modify the registry incorrectly. Therefore, make sure that you proceed with caution. For added protection, back up the registry before you edit it. Then you can restore the registry if a problem occurs. For more information about how to back up and restore the registry, click on the number below to view the article in the Microsoft Knowledge Base:

  322756 (http://support.microsoft.com/kb/322756/) how to back up and restore the registry in Windows

  Click on the link below.

  Cannot open EXE files

• Search error Windows 7, ""Windows cannot access the specific bequest, a file, or a path. " May not permissions to access you the item. »

  When I try to use the search in Windows 7, I received the following message: "Windows cannot access the specific bequest, a file, or a path. May not permissions to access you the item. "I tried google problems and even went to the functionality in windows control panel - program - turning on or off, to make sure that I have the search function on. Also, I read in the community that you can use the search to find a file named regedit.exe to correct the situation. However, I cannot use the search function yet, so cannot find the file in question.

  Simon,

  Please contact the Microsoft Community.

  I would like you to follow the steps in this article-

  http://support.Microsoft.com/kb/2669244/en-us#top

  Note: Disabling the antivirus is at your own risk.

  We know if that helps.

• Access the properties of the line in the script

  Hi Experts

  I need to access the properties 'De TIP' and 'Gap' in Javascript ID CS4. I research in the references of scripts, but I failed. I have undderstand this property can not be set in the object model.

  

  Any help is welcome.

  Thanks in advance

  Concerning

  Arul

  Hi Arul,

  Check strokeDashAndGap Style of object/object property.

  HTH.

  --

  Marijan (tomaxxi)

  http://tomaxxi.com

• access the properties of a movie on the timeline

  I'm trying to buil a project that contains two clips and I need to access the clipA clipB period properties.

  If the parent property specifies a path to display objects that are above the current display to the screen object the list hierarchy, property that points to objects that are below?

  I m sure it must be easy to answer. I have just can´t seem to figure it out.

  Any help would be appreciated.

  I do not know how to interpret your description above / below, but to access the properties of clipA clipB, assuming that they share the same parent timeline...

  AS2: _parent.clipA.property

  AS3: MovieClip (this.parent).clipA.property

• Access and return of the properties of placedItem.file

  I am trying to assign properties to placedItem.file. However, whenever I try to access placedItem.file it prints / returns "undefined is not an object.

  I used the alert command to print the object e.g. alert (placedItem.file) and it prints the location of the image file. However, when I try to assign this value to a variable (var exampleName = placedItem.file) it also returns the same error.

  I also tried access under file properties, such as file.fullName and file.displayName. It returns the same error. If someone saw would be great. I really just need to return the path to an image to a variable.

  I ran the following without problem, such as you encounter.

  function test(){
  
      if(app.documents.length>0){
          var doc=app.activeDocument;
          var s = doc.placedItems[0];
          var info = s.file;
  
          alert(info);
      }
  
  }
  
  test();
  

• to access the .properties during development on Linux

  I have a program that normally runs as a package of .jar. There are several files of property, and everything works well, regardless of the OS.
  
  During development I sometimes run the main class directly. The properties files in the current directory. Everything still work correctly in Windows.
  
  However, under Ubuntu Linux, the file properties are not. It is configured to print a message to the console, and is an example of message:

  loadProperties(): cannot access cnd_ntc.properties

  it seems to search for the properties at the level of the root directory structure. What is the way of cross-platform to access the property files that will work within a .jar file and without?
  
  File names are added with a "/" (for example "/ CNDfilelist.properties"), which I thought was the appropriate way to do so.
  
  For reference, here's the method I use to open all the .properties files:

      // encapsulate opening of a properties file.  returns null if problem
      public static Properties loadProperties(String file)
      {
          String me = new String("loadProperties(): ");
          if (file == null) {
              System.out.println(me + "null filename");
              return(null);
          }
  
          Properties p = new Properties();
          InputStream fis;
  
          fis = NTC.class.getResourceAsStream(file);
          if (fis == null) {
              System.out.println(me + "cannot access " + file);
              return(null);
          }
  
          try {
              p.load(fis);
          } catch (IOException e) {
              System.out.println(me + "cannot load " + file);
              try {
                  fis.close();
              } catch (IOException e2) { /* what the heck you gonna do? */ }
              return(null);
          }
          try {
              fis.close();
          } catch (IOException e) { /* what the heck you gonna do? */ }
  
          return(p);
      }

  -Rich

  You have a CLASSPATH environment variable in Linux? If Yes, what is it?

• To access the properties of an Error Message When you use the DisplayRunTimeErrorDialogEx method

  I have a reminder that displays the standard runtime error dialog box using the method Engine.DisplayRunTimeErrorDialogEx of custom error. http://zone.ni.com/reference/en-XX/help/370052H-01/tsapiref/reftopics/engine_displayruntimeerrordial....  The parameters of this do not allow me to specify information about the error message available (via the properties of the stage of the appeal of error).  However, when built-in bed in treated TestStand display dialog runtime error through its methods of error handling he managed to fill in the details about the error.

  Anyone know how I can fill in the details and the error code from the dialog box fields when you use the DisplayRunTimeErrorDialogEx method to call it? See attached screenshot by one example of what I get when I use this method.

  Kind regards

  David

  Doug is correct; each sequence in the call stack has its own sequence context, so if you just "ThisContext" for the sequence context parameter, you provide the framework for the error callback, which has no error.  To access the context of the sequence that wrong, you use the caller property to get to the next level in the call stack, for example:

  RunState.Engine.DisplayRunTimeErrorDialogEx ("error Dialog", ThisContext.Caller, 0, False, False, False, False)

  I hope this clarifies!

• Is it possible to access the Microsoft Money 2005 file, if it does not accept your correct connection on the credential?

  Original title: Microsoft Money 2005 file logon.

  Is it possible to have access to your Money 2005 file if if does not accept your correct connection on the credential?

  Hi ChaserUP,

  Have you made changes on thecomputer before this problem?

  (a) If you use Windows Live ID, you can follow this link & check if the problem persists.

  Errors that you receive when you try to open Money by using your Windows Live ID credentials

  (b) if the problem persists, I recommend you contact Microsoft Money support for assistance.

  Hope the helps of information.
  Please post back and we do know.