to access the removable disk: menu box E

Similar Questions

• How can I access the hard disk in a satellite A30?

  I just bought a new hard drive and were surprised by the lack of information on the internet with the help to access the hard disk. Help, please. I have the satellite a30-203. Thank you, Daniel Short

  Hello Daniel,.
  location of the HARD drive is down just under the CD-RW/DVD device.

• Strange behavior of startup and cannot access the tools-> options menu

  Since this morning my LV8 installation does not display the normal startup dialog box (allowing you to open the existing screws or open a new one), but doesn't that immediately opens a new VI.  If I close this new NC and then instead of back to the Startup dialog box it opens a second new (empty) VI.    Furthermore, I can't open the tools-> option menu from a façade of VI.

  I tried to repair the installation of the LV and when that does not work I went for a complete deletion and don't reinstall - still no joy!

  I also check that it is not user specific, so that when I login as a different user on the same PC, I get the same behavior

  Help - please!

  Hi AMHurrel,

  This seems quite strange.

  Have you changed anything on your installation?

  When you say you did a complete removal and reinstall, how?

  Here are the steps I follow:

  The following procedure removes the software Instrument National:

  1. turn off the computer and physically remove or disconnect all devices that you have installed on your system.
  This includes everything-PCI, ISA, USB, 1394-, or based on ethernet.

  2 turn on the computer and go through Add/Remove Programs (START"SETTINGS" control PANEL"Add/Remove Programs)
  and remove all OR related. As a general rule, if you remember, it is best to uninstall things in
  the reverse order in which they were installed. For example, if you installed LabVIEW, then NOR-DAQ, then the
  Internet developers Toolkit for LabVIEW, you must uninstall the Internet firstly, developers kit
  NOR-DAQ, then last LabVIEW.

  3. once everything has been deleted (don't be concerned at this stage if an item still appears in the)
  Ajouter/suppression of programs list after you remove it), close all programs and restart your computer.

  4. go to the START button in your operating system, choose RUN and type 'regedit '. This will open up the registry
  The Editor window. Go to the registry Menu and choose Export registry file. Select 'All' to the export range,
  and select a file name. This creates a backup of the registry in case a mistake is made when you remove the key.

  5. remove the following components of the registry in the Windows registry:

  HKEY_CURRENT_USER\Software\National Instruments remove the entire tree!
  HKEY_LOCAL_MACHINE\Software\National Instruments remove the entire tree!
  HKEY_LOCAL_MACHINE\System\CurrentControlSet\Enum\PCI\ or \ISA and remove registry entries containing one
  keys with 1093 in them.
     
  Don't worry if one of these trees are not listed. Continue with the rest of the process.

  Note: You may need to change the security policies. In Windows 2000, 98, 95, NT, go to [regedt32] then
  Security > permissions. In Windows XP, you can change the security using Edit options > permissions in the
  Publisher of the registry (regedit).

  6. close regedit.

  7. make sure that you don't have your own screws or other files in the "C:\VXIpnp."
  "C:\Program NIUninstaller Instruments", or "C:\WINDOWS\nidaq" folders. If you do, copy them to a
  different location. If you are concerned about preserving old virtual tracks and your SCXI configuration.
  then save the file "C:\WINDOWS\niconfig.daq", too. Delete all folders and files mentioned above.

  Note: If you have Windows NT/2000, replace 'C:\Windows' with 'C:\WINNT' in the path listed above.

  8. save the attached file msiBlast.zip to your desktop.

  (a) extract the msiBlast.exe file from zip archive.
  (b) double click the downloaded msiBlast.exe file to run the executable.
  (c) choose the selection show only installers of NOR.

  (d) using select (Ctrl + left mouse click) of all National Instruments software that appears in MSIBlast.
  (e) press the button uninstall. This allows to uninstall all entries in register MSI of National Instruments.

  (f) Optional:
  The repair option will open the installer of National instruments and run the option fix in the installer.

  Maintenance mode will open the installer and allow the user to change the installation. To open the installation program indicate nothing in command line Arg? Dialog box.

  9. restart your computer.

  10. you should be ready to install your software. For the cleanest possible installation, first install all of your
  software application, such as LabVIEW, Measurement Studio development, etc. Perform a custom installation so that you can
  Install just the request WITHOUT DRIVERS EVERYTHING. Restart your PC after each installation request.
  Even if the installation program does not tell you to restart, it would probably be a good idea to do it anyway.
  Now install the software driver and follow the associated user manuals. Some older non-Plug-and-Play hardware
  must be installed before the pilot. Download the latest versions of the drivers that support your hardware
  She draws from our drivers and software updates (link below) and install them one by one, reset after each
  install.

  11. Lastly, stop and re - install your hardware. When you start back, he must be detected in MAX.

  NEITHER drivers link:- http://www.ni.com/softlib.nsf

  * Attached is msiBlast.

  You get an error message?

  Let me know what you think,

  Kind regards

• Access the recovery disk and deleting files

  I am running Vista Home Premium SP2 on a HP G50 laptop.  Recently, I ran a backup of my system and wanted to place on an external drive which was under XP.  The system wouldn't let me, so I put it on the recovery partition drive.  This filled the disk and slowed my computer down a lot.  I want to remove the backup files but can not access the recovery disc.  How to access this disk to remove the backup files?  In addition, remove the recovery files?  I made the recovery disc.

  Hello

  Here is the information from HP for your problem with the partititon of recovery

  (D) drive is red in Vista

  http://h10025.www1.HP.com/ewfrf/wc/document?DocName=c01555992&cc=us&LC=en&DLC=en

  for any additional questions about this contact HP

• Change sharing permissions, now I can't access the local disk

  Hello all, I have two computers, both running windows 7 (one is 64-bit and the other is 32-bit) connected via LAN and WiFi. One of them has all of the local disk shared with full compensation for everyone (full control). I decided to remove these permissions and control to "deny". Then I had to cancel the task and decided to resume later. HURT, now I've lost access to this drive, even though I can access some files. When I try to enter in the drive, an error message appears saying "C: is not accessible. Access is denied. I did some research and it seems to be a common problem, but I followed all the steps did not work. It shows as 0 bytes and security options does not show anything, but "you don't have permission to view or change the permissions of the object settings. I tried to adapt, even in safe mode and as administrator, do not to prevail. It keeps saying 'access denied' I also tried to set a hidden administrator account, but the account manager is 'not available for my system' when I made these unfortunate changes, it was not this computer but on the other, I think it might be the reason. Now, I can not access my local disk or change anything. Please, help me, I can't find a solution to this mess!
  Thank you

  Hello

  I suggest you to follow the steps in the link given below and check if it helps.

  How to open a file if I get an access denied message?

  http://Windows.Microsoft.com/en-CA/Windows7/how-do-i-open-a-file-if-i-get-an-access-denied-message

  Let us know the status of the issue.

• 12 items "copy/move to the removable disk.

  The base case # 185684196, support phone donated last year, the problem persists.  12 items on my desktop PC (Windows 7, 64-bit) - I import photo in the Organizer, card camera (Nikon RAW files), and THEN use the function ' Copy/move to removable disk' to move these files to an external hard drive (RAID 1 configuration) for permanent storage.  When I run this process, initially, it moves the files to the disk of destination - then a dialog asks (about): are you sure you want to delete these files? (of the Office Unit) - I click on 'Yes' - a progress bar works - and almost finished, the process fails "organizing elements - year error occurred while reading files or writing files to disk."  The drive is may be full, or there may be a problem with the source media. "In fact, there is a large amount of disk space on the destination drive.  My wife and I use (for many years) this program for semi-professional use.  It is CRITICAL to avoid any corruption - indexing / connection between the miniature Organizer reference images and the image stored outside files MUST be properly maintained.  What is causing this error message, what needs to be done to solve the problem?  I have the couple of times when this has happened, I went on the storage disk, delete manually imported just files, run the process - and, for this 2nd attempt, the process completed successfully.  Of course, this isn't a long-term solution, nor a procedure appropriate - and I always worry a sort of corruption may be introduced-, please notify the right solution.  Also - I have been informed and practice, not allowing the catalog to grow beyond 5 000 images (I began a new catalogue).  With the current batch of photos, I'm importing (more than 300 images), I get also a message "notice" to save the catalog - something I think I'll make to an another external drive, for redundancy even beyond the present RAID 1 storage - however, this solves the problem, I ask you to help

  It then I need my glasses!

  I would recommend lance the Downloader of the Organizer (Ctrl + G) and in the Advanced dialog box, select your device (camera OR card reader) and choosing your external hard drive rather than the C: drive or another volume internal. See the image below.

  Who will get all your images to their final destination without any move/copy of the files or folders.

  Which means less chance of damaged files or broken links database. It will also be a more efficient workflow.

  NB. it is always useful when you use external hard drives to keep connected to the same USB port. Also keep a backup on a secondary device because these external drives are extremely susceptible to failure.

  
  

  

• The drop down menu boxes that appear under the heading of Firefox do not fill. A form of box on the screen, but it is empty. Given zero no has not solved the problem.

  The file, editing, display and help tabs that were on the previous version of FireFox Menu bar top are apparently incorporated into the "FireFox" drop-down box in the latest version of the browser. I was unable to open those tabs earlier, so by the recommendation of the Support Forum, I have Firefox on my laptop. Now not only the tabs above are missing after this reset, but the drop down menu does not open in any submenus. What I see now is a box on the surrounded black screen, but sub menu selections such as save as, print, copy etc are not shown in the box. This is why the Navigator is not functional in its current state.
  Does anyone have a fix for this problem that will not delete my favorites and other content stored on Firefox? Please save me to return to Internet Explorer.
  AJJC

  Try disabling hardware acceleration in Firefox.

  • Tools > Options > advanced > General > Browsing: "use hardware acceleration when available.
  • https://support.Mozilla.org/KB/troubleshooting+extensions+and+themes
  • https://hacks.Mozilla.org/2010/09/hardware-acceleration/

• Cannot access the HARD disk drive HARD - Satellite P300 recovery

  Hi all

  I want to perform a Toshiba product recovery, using the partition on the HARD disk. I did it before and no problem.

  But when I press F8--> computer repair--> selection language--> then I have to select a user (Administrator / my name/guest) when I select the administrator, it says that my account has been disabled, when I select the user with my name (Kenneth) he continues to the menu where I can choose the different options for recovery. If I select the product Toshiba blah blah thingy a screen comes up saying it can't find 01 HARD drive. I did nothing with the partition containing Vista.

  My guess is that I need to log in as an administrator, which is impossible. My user account in Vista is a Director,

  Can someone please?

  I use a P300

  Best regards
  Kenneth

  You have made changes on the second partition where is placed folder HDDRecovery?

• Impossible to access the advanced boot menu

  Original title : Safe mode for access to the

  When I start my laptop it goes right into the Boot Device menu. How to do in safe mode? By pressing F8 does nothing. I use windows XP

  Hello barber147,

  What is happening on the machine is that you have to start safe mode?

  Sometimes we don't see the prompt for F8 to access the start menu.

  Often find it me easier to continually press F8 during the boot process

  Let us know.

  Best regards

  Matthew_Ha

• Error code when you try to copy the MP3 file on the removable disk: 0 x 80070052

  I can't copy MP3 files from the hard drive of the computer to removable disk

  The error code shows 0 x 80070052

  I suggest that you try the instructions in the following article:

  http://www.QuickOnlineTips.com/archives/2007/09/how-to-fix-error-0x80070052-on-USB-flash-drives

• How to access the VM disk

  I created a snapshot, and his name is in the form of RHEL6x64bit - 000009.vmdk. I am able to access the disk when it is turned off. But I am not able to access the snapshot file when the virtual machine is running.

  I understand that we should create a log to make a snapshot. I try to use the function DoRedo() to understand in the sample, but it is still throwing an error message indicating that the disk is in use when calling this function:

  vixError = VixDiskLib_CreateChild (parentDisk.Handle (),

  appGlobals.diskPath,

  VIXDISKLIB_DISK_MONOLITHIC_SPARSE,

  (NULL, NULL);

  and also QueryDiskChangedArea API work fine VM is off but not when the VM is powered. Some can help me solve this problem. BTW I use Linux64 bit years as someone can tell me the command line parameters, I'm going to vixdisklibsample call the DoRedo function.

  One thing is who vixdisklib options works very well when the machine virtual source is of but it will work not in.

  For ex: -.

  . / sanv_rep-dump - host 172.168.1.114 - user root - password Sanovi123$ ' ACTVM/ACTVM.vmdk [datastore1] '.

  [NFC ERROR] NfcFssrvrProcessErrorMsg: received diskLib 16392 Server error: NfcFssrvrOpen: cannot open '[datastore1] ACTVM/ACTVM.vmdk': cannot lock the file
  Error: [vixDiskLibSample.cpp:606] 40080000000f the file is already in use

  with our thanks,

  David

  FileFault means generally that TCC has been reset. See the following link and if it is useful

  QueryChangedDiskAreas call fails only for some VM

  You will also need attention to how you get the changeid? You pass the good changeid for the queryChangeDiskAreas?

  . / Siva.

• 12.04.01 Ubuntu x 86-putting in place a virtual Windows XP machine to access the physical disk

  Dear community,

  I'm new to VMware Workstation, but progressed in computer science.

  At first, I want to give you a brief introduction of my system and my goal.

  HP ProBook 6550 b (System with Intel Core i5 processor Intel-based)

  The HARD drive access mode: S - ATA AHCI

  Operating systems: Windows 7, Ubuntu 12.04 x 86, Ubuntu 12.04 x 64

  Boot Manager: GRUB2

  VMware Workstation (trial period) to 9.01 Linux x 86

  Goal: install MS Windows XP Professional with physical disk access several partitions on the hard drive local

  The installation of VMware Workstation 9.01 on my system Ubuntu 12.04 x 86 worked perfectly, without any error. Large.

  I was able to set up and run a Windows XP VM standard by creating a new virtual disk , following the Nice Wizard.

  It was just to test, but just after I tried to configure the same OS as a virtual machine using a physical disk (for advanced users) to directly access a local hard drive.

  Also, I selected "BusLogic (recommended)" on the choice of type of I/O controller.

  As a device, I chose the HARD internal laptop drive and used two individual partitions (the real partitions on my HARD drive I wanted access within the virtual machine).

  These partitions have been preformatted with NTFS (and not have been mounted in my Ubuntu).

  However, I was not sure if Windows XP has been will be installed on one of these partitions.

  The turn on/off the virtual machine to install the OS, I got the message following (msg1):

  "You are using a SCSI drive. Performance of dual-boot SCSI physical drives are poor. The installed operating system could not start correctly in the virtual machine. However, the physical SCSI disks work normally so exclusively in the virtual machine. »

  Just after the message following (msg2):

  "If you dual-boot a native Windows installation, problems can occur when attempting to start your system in VMware Workstation." For more information, see "http://vmware.com/info?id=128". "
  Click OK to continue, Cancel to power off.

  And finally this (msg3):

  «An error has occurred causing a virtual CPU go into the stop State.» If this anomaly had occurred outside of a virtual machine, it would have caused the physical machine restart. The stop State are accessible by properly configuring the virtual machine, a bug in the guest operating system or a problem in VMware Workstation.
  Click OK to restart the virtual machine or Cancel to turn off the virtual machine. »

  I cannot explain the last error message and don't know what to do.

  After specifying msg2, I found information about possible problems in dual-boot environments, caused by different drivers for the IDE controller.

  So I tried to change the access mode to S - ATA AHCI HARD drive to S - ATA IDE in the BIOS to solve the problem.

  Unfortunately, I have had no success on this operation, because the error message appeared again, once I restarted the VM.

  Sorry, but I have no idea what goes wrong.

  In fact, I don't know what VMware workstation wants to do, when you install the system on a disc/physical partition to have direct access to the local hard disk.

  Because I don't see even the first screen of Windows Setup, there must be something wrong.

  Underlying product system issues and if it's a primary or logical partition?

  Need a complete unformated HDD?

  Only selected partitions are accessible within the virtual machine?

  Is the system installed itself on the selected partitions?

  Maybe some experienced users can help.

  Your help is welcome!

  Thank you.

  stanni

  First I use a raw disk to install Windows XP from a virtual machine, but if I had an existing installation, I would add the partition as a raw to be executed with a VM disk.

  Here's what I'd do...  Install Windows XP to a normal file based virtual machine, and then add a second disk as a raw disk with the partitions you want to join.  That's assuming that you really need not where what to start Windows XP natively and the physical partitions that access are used for data.  Also if need be add the raw disk as IDE.

• How can I access the standard import dialog box. Import button does not appear in the library module

  Only the clumsy 'compact' mode is now available. Forums and tutorials that show all 'standards' import dialog. Forum Adobe suggests installing earlier version. Please tell us how this can be done with CC

  BrianH

  You should always use the 2015.2 or 2015.2.1 version which had the modified import dialog box. Update LR 2015.3 through the creative cloud desktop application.

• I can't access the firefox options menu

  Hello
  After v42.0 update of firefox, I can't access my menu options again. When I press options firefox opens just a blank tab. Topic: solution config is no longer . So I am open to suggestions...

  Said Legatus

  Hello
  After v42.0 update of firefox, I can't access my menu options again. When I press options firefox opens just a blank tab. Topic: solution config is no longer . So I am open to suggestions...

  Legatus,
  Have you tried uninstalling and reinstalling Mozilla Firefox? This will usually fix most of the problems. If the problem persists after that we determine at least it's settings or compatibility issue.

  Respectfully,.
  cpeters008

• Contextual before accessing the e-mail dialog box

  On August 10, 2015 when I opened Firefox to access my email account, a popup dialog appeared offering online ID protection. He seemed to make an offering of Mozilla, I went and signed up for it. However, when I got to the point where they have asked for my social security number, I left. Unfortunately, in the process before this stage, I must have authorized a trial of this offer and had given their number in my debit card, assuming I would be responsible only for $1.00. 15, I got a warning from my Bank saying that my card has be used for a purchase outside the United States. The amount was priced at $29.95 per ThinkCredit. The same day I called to 800-424-0262 and asked what the charge was for and was told it was for a trial for Credit Reporting in 7 days. I said that I was not interested and told me that they would cancel the order (cancellation #79845570). I informed my Bank and they said they would monitor the account to ensure that the charge had been reversed. Yesterday I received my bank statement and noticed the my account had been charge $1.00 two times on the 10th. Once for periodic charges for the ThinkCredit and once for a recurring fee for Idsafelock (800-316-0249)
  I know it's a bit long explanation before my question of: was initiated by Mozilla or Firefox above pop-up dialog box?

  Thanking you in advance for your cooperation and consideration for answering my question, I remain,

  Robert P. Worst
  [email protected]

  No, he wasn't - Mozilla has nothing to do with "scams" like that. Best thing to do is to contact your Bank and dispute the charges.