To access the results of query XML MSSQL

Similar Questions

• RunState.ProcessModelClient. how to access the results of markets located in the loops?

  Hello

  In my sequence, I have to perform an analysis of the results before I have the MainSequence and return to the process template. Basically, I need to check made some steps has passed.

  I access the results using RunState.ProcessModelClient. Using what I have access to the list of results. I would like to write that I have access to each result but I can't because I spotted the results of steps which are curly are not accessible (they are not there); However, they are on the report.

  How is it possible? How do I access results in a loop? Where are they?

  K.

  Hello

  not too painful:

  the loop results in the usual place online, it's just the layout that will look like a little confusing:

  You use some revisions of my TestStand (you are in 3.1)

  

  The Runstate.ProcessModelClient is actually a copy of the space of time edit, not space running - it's the SequenceFile type, which means that even if you can see the layout of the result containers that belong to each step, they are there permanently, and not filled in this place from the moment of execution.

  At the level of the mainsequence, you're still in your client, then you can go to Locals.ResultList directly.

  In there, you have the singular element that is the result of the first and the only stage of your Mainsequence of your.

  Inside there is the. TS. SequenceCall container. It is effectivey the resultlist gait that calls (always Mainsequence) seq1 so inside that, there is an another ResultList.

  It's the ResultList for sequence "Seq1".

  Which has a single item since this sequence has only one step inside of type SequenceCall.

  [0]. TS. SequenceCall.ResultList.

  From there you can see a lot of results even if you have only 4 effective steps in this sequence.

  12 results covers:

  3 iterations of ('for' 'Test2' 'end').

  and then the last 3 items are "Test1" loop 2 times more.

  When you set a stage of the loop and include you the results of each iteration, you get these results (2 in your case) more a global success-failure based on the criteria (your care ot 100% must pass in order to study the step successful when all iterations are complete.)

  Note in your pre Expression where you change the name of the step on the fly, your labeled Test2 incremental changes the name from 'Test1' + Str (Locals.LI), and the Test1 marked step uses the same expression for this will look slightly confused that you cross your results.

  Hope that helps.

  Thank you

  Sacha

• After you generate a table in xml format, how can I save the result in an XML table?

  Hi all
  I used this feature to create a table in the XML schema:
  example:
  SELECT xmlelement ("State", xmlattributes (http://www.opengis.net/gml as "xmlns:gml"),)
  XMLFOREST (name as "Name", "Population" of the population)) of the State;
  result:
  < Statexmlns:gml = "http://www.opengis.net/gml" >
  < name > Wilkopolska < / name >
  the population of 35000 <>< / Population >
  < / state >
  Now I need to insert the result in an XML table, because I need to save the result to use the latter, I hope someone can help, and if there is other way to do this, it would be great.
  Thanks an ot and best regards,
  Lama.

  Just insert in a table...

  insert into t
  SELECT xmlelement("State", xmlattributes( 'http://www.opengis.net/gml' as "xmlns:gml"),
  xmlforest(name as "Name", population as "Population")) from state; 
  

  and a complete example:

  SQL> create table t (test xmltype)
    2  /
  
  Table created.
  
  SQL>
  SQL> create table state
    2  (name varchar2(10)
    3  ,population number
    4  )
    5  /
  
  Table created.
  
  SQL>
  SQL> insert into state values ('WI', 35000)
    2  /
  
  1 row created.
  
  SQL>
  SQL> SELECT xmlelement("State", xmlattributes( 'http://www.opengis.net/gml' as "xmlns:gml"),
    2  xmlforest(name as "Name", population as "Population")) from state; 
  
  XMLELEMENT("STATE",XMLATTRIBUTES('HTTP://WWW.OPENGIS.NET/GML'AS"XMLNS:GML"),XMLFOREST(NAMEAS"NAME",P
  ----------------------------------------------------------------------------------------------------
  WI35000
  SQL>
  SQL> insert into t
    2  SELECT xmlelement("State", xmlattributes( 'http://www.opengis.net/gml' as "xmlns:gml"),
    3  xmlforest(name as "Name", population as "Population")) from state; 
  
  1 row created.
  
  SQL> select *
    2    from t
    3  /
  
  TEST
  ----------------------------------------------------------------------------------------------------
  WI35000
  

• Access the results of the dynamic query database...

  CF colleagues:

  I need to execute a loop of 4 times, to access the four distinct values a data offline in a test results table (tbl_results), where all four are in line with the student (WHERE studentid = etc.).

  It looks like this...

  < cfset variables. TimeTotals = 0 >

  < cfloop from '1' to step "4" = = = '1' index = "timrec" >

  < cfquery datasource = "MyDSN" name = "rs_time" >

  SELECT Btime #timrec #.

  OF tbl_results

  WHERE studentid = 'jack '.

  < / cfquery >

  < cfset variables. TimeTotals = variable. TimeTotals + (? rs_time.) BTime #timrec # value?) >

  < / cfloop >

  QUESTION: How should I address this #timrec # value Btime? Not that way, I know, but how?

  Looking forward to your wisdom, with gratitude,

  Hans

  There are two ways to attack this, but you're close enough.  One way is to simply include a column alias in the query, and then use it to make reference to results:

  SELECT Btime #timrec # LIKE feeling

  OF tbl_results

  WHERE studentid = 'jack '.

• JavaScript Confirm box depends on the results of query

  Hello
  
  I use Apex version 3.2.1 and I'm looking for a way to do the following, any help much appreciated:
  
  A javascript confirm will appear when the user sends a page if the result of a query returns something, the query should look like this...
  
  SELECT * FROM LINKEDPROJECTS
  WHERE ENV_ID =: P18_ENV_ID
  AND ID_COMP =: P18_COMP_ID
  AND DATE_FROM < = to_date (: P18_DATE_TO, 'DD-MON-YY')
  AND DATE_TO > = to_date (: P18_DATE_FROM, 'DD-MON-YY')
  
  If it returns no data page will present as usual, if it does not return the data from the confirmation box will appear, and the message will be also the result of a query-driven.
  
  If the message would be something like...
  
  Project (s) + "select the NAME OF PROJECTS WHERE ID IN (SELECT PROJ_ID FROM LINKEDPROJECTS WHERE ENV_ID =: P18_ENV_ID +)"
  + AND IDENTIFIANT_COMPOSANT =: P18_COMP_ID +.
  + AND DATE_FROM < = to_date(:P18_DATE_TO, 'DD-MON-YY') +.
  + AND DATE_TO > = to_date (: P18_DATE_FROM, ' MON-JJ-AA "") "+ have this environment for the dates you selected.  Do you want to continue with the reservation?
  
  By selecting Yes submits the page, select no hands it to the page.

  Had this work now, if it can help someone else out there that's what looked like my javascript in the end...

• Problem to access the results of the DataService fill method

  I've set up an application that retrieves data from a data service
  configured with a java-dao adapter. If I set a DataGrid with the
  The table that is populated by the fill method, I see the data in the grid. Cool.
  So I know I have configured and coded everything correctly.
  
  However, if I try to access the data by the following code, it
  looks like my table is empty!
  
  Ray = new ArrayCollection();
  DS = new DataService ("assets");
  DS. Fill (Ray);
  var active: active = ray [0];
  
  That gives me a clue "0" error limits. I also tried
  ray.getItemAt (0) with the same results.
  
  How to access and manipulate the results of a method of filling via
  ActionScript? I am currently using Beta3.

  Note that it takes time to actually make the dataservice call and retrieve the results. Your data will be unavailable immediately. After calling fill(), you must wait for the "result" of the DataService object event.

• Want to Elimate 'SYS. ODCIVARCHAR2LIST"by the result of query

  Hello
  
  Oracle Version installed is 11.0.2r6. I have a dummy table with data as below:
  
  STID ADDRESS Type_de_fichier
  -------- ------------------ ----------------
  SALES of ABC 9927 has 0
  TRANSFER of XYZ 9927 b 0
  TRANSFER of ABC 9927 has 0
  TRANSFER of XYZ 9927 b 0
  
  I want that the output voltage:
  
  STID ADDRESS Type_de_fichier
  -------- ------------------ ----------------
  9927-0 ABC SALES, TRANSFER
  TRANSFER of XYZ 9927 b 0
  
  I used 2 methods to achieve the same result, but face some problems.
  
  Method 1:
  --------------
  SELECT STID, ADDRESS, LISTAGG (File_Type, ',') within THE GROUP (ORDER BY Type_de_fichier) AS file_type
  MODELING
  STID GROUP, ADDRESS;
  
  I got the output as:
  
  STID ADDRESS Type_de_fichier
  -------- ------------------ ----------------
  9927-0 ABC SALES, TRANSFER
  9927b 0 XYZ, TRANSFER
  
  Method 2:
  -------------
  SELECT STID,
  ADDRESS,
  CAST (COLLECT (SEPARATE File_Type) AS SYS. ODCIVARCHAR2LIST) AS File_Type
  FROM (SELECT STID, ADDRESS, MODEL Type_de_fichier)
  STID GROUP, ADDRESS;
  
  I got the output as:
  
  STID ADDRESS Type_de_fichier
  -------- ------------------ ----------------
  9927-0 ABC SYS. ODCIVARCHAR2LIST (SALES, TRANSFER)
  9927b 0 XYZ SYS. ODCIVARCHAR2LIST (TRANSFER)
  
  Same method 2 gave good result which I like, "SYS. ODCIVARCHAR2LIST"is coming as a prefix in the result. I tried to use the replace, but it does not work. I tried to use the "wm_concat" method, but it does not work.
  
  Can someone help me please to get there? I want a simple Select statement, not the functions/procedures etc.
  
  Thank you
  Stéphane.

  And what about:

  SELECT STID, ADDRESS, LISTAGG(File_Type, ',') WITHIN GROUP (ORDER BY File_Type) AS file_type
  FROM (
       SELECT DISTINCT STID, ADDRESS, File_Type
       FROM DUMMY
       )
  GROUP BY STID, ADDRESS;
  

• Display of the results of query in Excel on the Web

  Hello
  
  I try to display data from a query in excel on the web without creating an existing file. I know I can create a CSV using UTL_FILE and post it but I was hoping there was a way to do it without actually creating the file. I have a procedure that resembles
  
  PROCEDURE displayAsCSV is
  cursor STUD_CURS is
  Select * from students;
  
  BEGIN
  for STUD_REC loop STUD_CURS
  HTP. Print (' "' |") STUD_REC. FIRST_NAME. » " , " '|| STUD_REC. LAST_NAME. » " ');
  end loop;
  END;
  
  Anyone know if it is possible to display these results in excel in the browser by altering the MIME types or something similar?
  
  Thank you

  Check Tom owa_sylk utility with the appropriate mime type.

• To access the results search and replace...

  Find and replace is an excellent feature.

  The output of this Panel gives a lot of information...

  But, I wonder how I can access it in a jsfl script, write in a table of some kind or whatever.

  Is there documentation on how to access such things?

  Therefore, it is very, very useful!

  I think that you will need to use specific jsfl for each type of item to search for.  you could test by opening the Panel history and made a historical Panel right-click > view > javascript in Panel.

• In the results of query with consecutive Dates

  I have a table like this:
  
  volume of queue data_date
  01/09/01 2324, 353
  01/09/03 2324, 34
  2324 01/09/04 43
  2325 01/09/01 53
  01/09/02 2325, 66
  
  
  I want to have output like this:
  
  volume of queue data_date
  01/09/01 2324, 353
  * 2324 01/09/02 0 *.
  01/09/03 2324, 34
  2324 01/09/04 43
  2325 01/09/01 53
  01/09/02 2325, 66
  
  Note the filled in date 01/09/02.
  
  What I'm doing now is using a function table in select pipeline than iteratates the date of the execution of a statement range for each date and make a current output. A little slow, but faster than the old solution below.
  
  I also define operations using a single query that contains trade unions and disadvantages. This has proved to be slow.
  
  The only thing I have not tried is to have a stored proc popuate the value 0 for the missing date.
  
  Is there another way to do that is effective?
  
  I use a 10g database, but soon the data will be brought to a 11g.

  Welcome to the forums!

  I would say that one of the best ways on the latest versions of Oracle using the PARTITION OUTER JOIN.

  See the following link for examples/explanation: partition outer join in oracle 10 g

• We have created a responsibility custom to access the Collection of quality RESP results, we get an error - you have enough privileges for the operation. Please contact your system administrator.

  Hi all

  We have created a responsibility custom to access the results of Collections only HTML page.

  Details of the liability and the Menu are also less

  Name of the RESP: XX QUALITY

  Application: Quality custom

  Menu: XXQA_QUALITY

  and there is no attached grp applications.

  Definition of menu:

  Menu name: XXQA_QUALITY

  Description of function for the submenu SEQ invites

  10 quality Workbench results results collection begins Page quality Workbench results Start Page

  quality of view finds quality results 20 results display quality results

  We show only this specific user responsibility and whenever it tries to access the page "Results from the Collection" he gives us an error.

  "You have enough privileges for the operation." Please contact your system administrator.

  
  

  If we attribute an RESP of super user of quality to this user, it allows to access the form.

  
  

  Can you kindly help us to find a solution to this problem.

  
  

  Thank you

  Maury
  

  Hi all

  I guess I found the answer,

  I need to join all the submenus that are part of the HTML Page.

  Results from the collection			Results of quality Workbench Start Page
  Nonconformities			Quality Workbench nonconformities homepage
  Corrective actions			Quality Workbench action homepage
  Consultation of lots of Skip			Lot of Skip quality Workbench Start Page

  Have they added those. and it worked.

  Thank you

  Maury

• How to access the attribute of the Parent of a child node?

  Hello
  
  I'm trying to accomplish something simple here, by accessing the value of the attribute of the node parent to a value of the child. I have the date given here, but I'll try to find the name of the event to the date, the name of the event or the attribute parent date.
  
  I have the code here, as in the following, but I kept getting #1009 error term undefined in line with parent() inside. Could someone please guide me on how to solve this problem?
  
  Thanks in advance.
  
  Alice

  "alice_data" wrote in message
  News:gr2fkh$CRE$1@forums. Macromedia.com...
  > Hi,.
  >
  > I am trying to accomplish something simple here, by accessing the parent company
  > value of the attribute of the node to a value of the child. I have the date given here,
  > but I
  > trying to find the name of the event of the day, including the name of
  > the
  > event is the attribute of date parent.
  >
  > I have the code here, as in the following, but I kept getting term #1009
  > not
  > set the error on line with parent() inside. Could someone please guide
  > me on
  > How do I fix this?
  >
  > Thanks in advance.
  >
  > Alice
  >
  > Excerpt from Actionscript:
  >
  > var resultC:XMLList;
  > resultC = searchResult... Book.schedule_item.date;
  > var resultD:XMLList;
  >
  > / * The following two lines kept giving me some bad mistakes #1009
  >
  > / / resultD = resultC.parent () .@type;
  > / / trace ("It's D" + resultD + "\n");
  >
  > / * End of error
  >
  > var resultC_collection:XMLListCollection = new
  > XMLListCollection (resultC.*);
  >
  > //Debug goal, print the string the result selected XML
  > trace ("this is the result:" + resultC);
  >
  > XML:
  >
  >
  > 20/03/2009
  > 22/03/2009
  >

  I think your problem is that resultC is an XMLList. Go to the parent company, you
  necessary to arrive at a SINGLE element in the list. Even if it is a list that contains
  a single element, which is not the same as a single element.

  Try

  Note that I do not book in your xml, so I doubt that is correct
  resultC is searchResult.child('book') .child ('schedule_item').child('date');.

  resultD resultC = [0] .attribute () .parent ('type');

  Note that the syntax that you used will break if no element has not one
  child or the attribute corresponding to your request, so I used the more verbose syntax.

  HTH;

  Amy

• How can I achieve a sous-suite with Csharp for the results of the stage

  Hello

  I want to join a sous-suite programmatically. I used CSharp just in order to get the results of step, is not to create an execution. I start my run in TestStand. And in the Group of the cleanup step, I added a step to the 'Action' to collect the results, which will be used in another platform, of TestStand.

  To do this, I wrote the following code:

  Hey Ebru,

  Sous-Suite results are actually stored in their own container resultlist in TS. Sequencecall, which is accessible through the following statement:

  Locals.ResultList [step]. TS. SequenceCall.ResultList

  which step is the index of the call sequence step. This resultlist is structured in the same way as the table main resultList. You can also access your sous-suite directly from the container of movie file if it's in the same sequence as the main sequence file.  Access this reference using the following:

  RunState.SequenceFile.Data.Seq [sequenceName]

  Using this reference, you can access the result of each step Molok containers.

  I hope this helps!

• The results after termination window display

  Hi all

  When I terminate my execution of lot sequence in TS 4.0 using "RunState.Engine.TerminateAll ()", it shows grayed out windows and will not show the result window, even if it saves the results to an XML file on disk.

  Is there a way I can show the results window to the operator after the sequence ends?

  Thank you very much

  Chris

  Chris,

  I used RunState.Root.Sequence.Locals.ModelData.ReportFilePath as the parameter pathString.  It seems that RunState.Report.Location is not being updated until after the load call has been issued.  Report.Location would be the best option, but in this scenario, you will need to go to the root and hope it's the process template.

  The only other option would be to hardcode it in there but then you will need to generate the correct report even every time.

  Hope this helps,

• Out of shape so result is not xml and pdf

  I am new to Adobe Lifecycle Designer ES and have created a simple form, which will be submitted by e-mail. When the form is submitted, the result is an XML file. I need the file to a pdf file, with all the fields list.

  I have searched and cannot find the means and the option to do so. I'd appreciate help on this.

  I use ver LC Designer ES 8.2.1.

  Thank you.

  Mark K

  Change the button type Email submit button.

  Then change the Type as

  Change the type of sending in PDF format in the tab submit...

  Enter the e-mail address in the section to the URL as mailto:[email protected]

  

  Thank you

  Srini